Explain why you need agro and industrial waste as a construction materials.

Explain why you need agro and industrial waste as a construction materials. 
by

1 Answer

Answer :

1. To maintain ecosystem. 2. To reduce / control pollution. 3. To reduce the cost of construction material. 4. To improve the required properties in construction materials like light weight product, thermal insulation, shock resistant, sound insulation, etc. 5. To solve the problem of industry waste disposal. 6. To conserve the natural resources. 
by

Related questions

Explain about Agro waste material. State its importance in construction.

Description : Explain about Agro waste material. State its importance in construction.

Last Answer : Waste materials produced from agricultural byproducts such as coconut shells, sugarcane bagasse, straw, rice husk, coconut fibers, coconut and areca nut tree trunks, coconut leaves etc. are known ... floor tiles, brushes, mattresses j) Mixed with cement mortar which increases the impact strength

Explain the criteria for selection of construction materials for different civil engineering Structures on basis of their strength and durability

Description : Explain the criteria for selection of construction materials for different civil engineering Structures on basis of their strength and durability

Last Answer : The material must be selected for their ability to support the loads imposed by the building over the whole life of the building. An appropriate structural system and correct selection of ... of the building. The construction material should have sufficient strength to carry the prescribed load.

State the two uses of the following construction materials: i) Hollow blocks ii) Pavement blocks

Description : State the two uses of the following construction materials: i) Hollow blocks ii) Pavement blocks 

Last Answer : i) Hollow Blocks: a) Used for external load bearing walls, b) Panel walls, c) Columns, d) Retaining Walls e) Compound Walls, f) Used for sound insulation g) It Keeps the house cool in summer ... give pleasant look d) Petrol pumps e) gardens f) Airports g) Kids play area h) Jogging tracks

State the uses (two each) of the following construction materials: i) Soda lime glass ii) Ferrous metal

Description : State the uses (two each) of the following construction materials: i) Soda lime glass ii) Ferrous metal

Last Answer : i) Soda lime glass: a) Used in window and plate glass b) Glass blocks c) Bottles d) Inexpensive table wares e) Fluorescent and incandescent light bulbs ii) Ferrous metal: a) CI (Cast Iron) ... GI sheets f) Carbon steel is used for making tools g) Weld meshes are used for partition and fencing

Give properties and uses of ceramic materials in construction.

Description : Give properties and uses of ceramic materials in construction.

Last Answer : Properties: 1. It is hard. 2. It is bristle. 3. It is in the form of amorphous (non-crystalline) 4. The structure is glassy. 5. It is insulator thermally & electrically. 6. It is ... porcelain. 6. For making POP. 7. For making electric. 8. For Manufacturing of sanitary wares, pavers. 

Enlist any two natural and artificial construction materials.

Description : Enlist any two natural and artificial construction materials.

Last Answer : Natural construction materials- Stone, Timber, Lime , Soil Artificial Construction Materials – Bricks, Tiles, Cement, Aggregate, Artificial Sand, Plywood and Glass

State the factors affecting selection of construction materials.

Description : State the factors affecting selection of construction materials.

Last Answer : Following are the various factors being considered for selection of construction material. 1) Prescribed load: It is a design load which can be taken by the construction material. The ... the eco-system of environment and the required material should be eco-friendly or environmentally friendly.

Describe the factors for selection of construction materials on the basis of strength.

Description : Describe the factors for selection of construction materials on the basis of strength. 

Last Answer : Material must be selected for their ability to support the loads imposed by the building over the whole life of the building. An appropriate structural system and correct selection of ... replacement requirement, but the material should also be appropriate for expected life of the building.

List any four artificial construction materials.

Description : List any four artificial construction materials.

Last Answer : Artificial construction materials. 1. Cement. 2. Brick. 3. Concrete. 4. Mortar. 5. Tiles. 6. Glass

Explain about geo synthetics materials. Mention application of it

Description : Explain about geo synthetics materials. Mention application of it

Last Answer : Geosynthetics are man-made materials used to improve soil condition. Geo means earth or soil and synthetics means man made. Geo grids, geo textiles, geomembranes, geo cells are some of the ... hill sides. h) Reinforced soil- soil walls, bridge abutments, culverts, bridges, soil arches

Give the uses of granite & marble polishing waste.

Description : Give the uses of granite & marble polishing waste. 

Last Answer : Uses of granite & marble polishing waste : 1. Used as fine aggregate in mortar & concrete. 2. Used in manufacturing of bricks. 3. Used inmanufacturing of artificial stone. 4. Used inmanufacturing of paving blocks. 

Give any two uses of granite and marble polishing waste.

Description : Give any two uses of granite and marble polishing waste.

Last Answer : Use of granite and marble polishing waste. 1. It is used in manufacturing of brick and tiles 2. It is used for filling joints in flooring. 3. It is used in self-compacting concrete.

State the applications of soils as a construction material.

Description : State the applications of soils as a construction material. 

Last Answer : Soil is naturally obtained from disintegration of rocks when they are exposed to atmosphere by weathering agents like sun, wind, rain, frost etc. Applications of Soil : Soil is used as construction and ... is used in manufacturing of bricks and tiles. Sand from soil is used in filter bed.  

Describe the scope of construction material in environmental engineering.

Description : Describe the scope of construction material in environmental engineering. 

Last Answer : The goal of environmental engineering is to ensure the community development and the sensible use of water, land and air resources to make them sustainable. This goal is achieved by managing ... , artificial sand , waterproofing and damp proofing material of required quality and quantity is used.

Suggest the type of cement used for the following : (i) For modular construction where form work needs to be removed early for re-use. . (ii) Mass concreting such as construction of dam. (iii) Decorative works in external surfaces of building. (iv) Cementing the oil well.

Description : Suggest the type of cement used for the following : (i) For modular construction where form work needs to be removed early for re-use. . (ii) Mass concreting such as construction of dam. (iii) Decorative works in external surfaces of building. (iv) Cementing the oil well.

Last Answer : i) For modular construction where form work needs to be removed early for reuse. – Rapid Hardening Cement ii) Mass concreting such as construction of dam. – Low heat cement. iii) Decorative works in external surfaces of building – Coloured cement. iv) Cementing the oil well. – Oil Well Cement. 

State various thermal insulating materials. State any two properties of insulating material

Description : State various thermal insulating materials. State any two properties of insulating material

Last Answer : Thermal insulating materials: 1) Asbestos 2) Aluminum Foil 3) Thermocol 4) Saw dust 5) Cork board slabs 6) Foam glass 7) Rock Wool 8) Glass Wool 9) ... . h) Presence of Moisture: with the increase in moisture content, the coefficient of thermal conductivity rises greatly

What do you mean by eco-friendly building materials? State any two properties of it.

Description : What do you mean by eco-friendly building materials? State any two properties of it.

Last Answer : Eco-friendly means earth-friendly or not harmful to the environment. This term most commonly refers to products that contribute to green living or practices that help conserve resources like water and ... It reduces air pollution, land pollution & water pollution. 7. It is locally available. 

What are the properties of sound insulating materials?

Description : What are the properties of sound insulating materials?

Last Answer : Properties of sound insulating materials: 1. It should be light in weight 2. Easy to handle and fix 3. It should be resistant to attack termite and insect 4. It should have low density and porous texture 5. It should be fire resistance 6. It should be moisture resistance

Describe the broad classification of materials.

Description : Describe the broad classification of materials.

Last Answer : Materials can be classified into following types: 1) Natural materials 2) Recycled materials 3) Artificial materials 4) Special materials 5) Finishing materials 1) Natural construction ... and roofing. Varies types of tiles are available in market like Vitrified, Shahabad, Mosaic etc 

State the materials required for irrigation structures in general.

Description : State the materials required for irrigation structures in general. 

Last Answer : 1) Cement 2) Aggregate 3) Sand 4) Soil 5) Brick 6) Fly Ash 7) Tiles 8) Stones 9) Steel 10) Bitumen etc. 

State the materials for different civil engineering structures.

Description : State the materials for different civil engineering structures. 

Last Answer : 1. Natural materials- Stone,Sand,Timber etc.. 2. Artificial materials- Brick, Tile, Cement etc. 3. Special materials- Fibre, Bitumen etc. 4. Finishing materials- POP, Wall Cladding etc.  5. Recycled materials- Fly Ash, Rice Husk etc.

State the Properties of thermal insulating materials.

Description : State the Properties of thermal insulating materials.

Last Answer : Properties of thermal insulating materials: 1) Thermal insulating should be bio resistant and dry. 2) Thermal resistant should be chemically resistant and fire proof. 3) Thermal resisting ... in the moisture content in the material, the coefficient of thermal conductivity rises greatly.

Enlist the different sound insulating materials and also state their suitability.

Description : Enlist the different sound insulating materials and also state their suitability. 

Last Answer : Different sound insulating materials: 1) Asbestos , 2) rock wool , 3)glass ,4)silk, 5)Han felt 6) Mineral wool boards, 7)cane fibers. 8) Acoustical plaster boards and tiles 9 ... tiles and acoustic plaster are suitable where absorption of sound required from tile to tile should be uniform.

List the materials used for water proofing.

Description : List the materials used for water proofing.

Last Answer : Following materials are used for water proofing Water proofing materials based on bitumen and tar binders are 1) Emulsions and pastes 2) Mastics . Hot and Cold Mastics  Bitumen , ... ) Coated impregnated roll materials ii) Non Coated impregnated cardboard rolled materials 4) Sealing materials

State situations where sound insulating and damp proofing materials are used.

Description : State situations where sound insulating and damp proofing materials are used. 

Last Answer : Situations where sound insulating materials are used: 1) Glass, mineral wool mats, are used as sound insulators as solid inner layers underneath floors, 2) Wood fibre and asbestos cement slabs are used ... in toilet floors of upper story, so that no dampness will occur in slab below that floor.

State suitability of: (i) Water proofing materials and (ii) Sound insulating materials

Description : State suitability of: (i) Water proofing materials and (ii) Sound insulating materials

Last Answer : i) Suitability of water proofing materials: 1. Concrete, Bricks, Stones, plaster have tendency to get deteriorate, hence leakage of water may occur in slab, beam, columns. Bitumen and tars ... noise. 6) Acoustic tiles and acoustic plaster are suitable where absorption of sound is required.

State the factors on which the selection of type of materials depend.

Description : State the factors on which the selection of type of materials depend. 

Last Answer : Factors for selection of materials. 1. Carry prescribed loads: The most significant requirement of a material used in civil engineering project is that it should be able to carry the design loads ... such as floor coverings, paints, and doors and window are chosen based on aesthetic consideration.

Explain defects in timber with neat labeled sketches

Description : Explain defects in timber with neat labeled sketches

Last Answer : a) Knots: These are the bases of branches which are broken off from the tree. This occurs because of improper cutting of tree. b) Shakes: These are cracks in the timber which appear due to excessive frost or ... of timber f) Bow: This is bending along the longer side of timber.

Explain the method by which waterproofing of existing old slab can be done.

Description : Explain the method by which waterproofing of existing old slab can be done.

Last Answer : i) Clean the slab ii) Expose cracks by tools and make them V' shaped. iii) Fill mix of cement mortar iv) Fill brick bats and sand over the slab v) Sprinkle cement slurry and paste of water proofing ... tiles over the layer of cement mortar 1:3 vii) Cure it for 3 days and slab is water proof.

Explain two properties and two uses of sand.

Description : Explain two properties and two uses of sand.

Last Answer : Properties: a) It is a naturally occurring granular material composed of finely divided rock and mineral particles. b) It is obtained by dredging of river, hence harmful for the ecosystem. Uses of sand: ... ) Manufacture of bricks d) Used in filtration of water e) Used to make casts.

Explain the manufacturing process of hydraulic lime.

Description : Explain the manufacturing process of hydraulic lime. 

Last Answer : 1. Burning of impure limestone / kankar containing clay containing less than 30 %. With coal or charcoal as fuel. 2. If soft limestone is used, it is powdered, mixed with clay in right proportion & ... long as it is protected from air & moisture. After slaking it should be used within a week. 

Explain various types of clays with their suitability.

Description : Explain various types of clays with their suitability.

Last Answer : Types of clays are: 1. Refractory clay (Terra cotta clay): This clay is highly disperse and very plastic. This clay contains high percent of alumina. Uses: Used to manufacturing of ... possessing a high degree of tenacity & plasticity. Uses:Manufacturing of glazed pottery, porcelain. 

Explain the process of distempering

Description : Explain the process of distempering

Last Answer : Process of Distempering: The application of distemper is carried out in the following way 1. Surface Preparation: The surface to receive the distemper is thoroughly rubbed and cleaned. New plastered ... plastered walls, distempers should be applied in two or three coats over coat of primer.  

Explain various types of tiles based on their use

Description : Explain various types of tiles based on their use 

Last Answer : 1. Natural tile: These types of tiles are produced from natural materials that are quarried, finished and cut to size. Common types of stones used as flooring tiles include granite, marble, ... acquire the desire print or colour after manufacturing. They are famous inthe name of galicha tiles. 

Define lime mortar. Explain its Properties.

Description : Define lime mortar. Explain its Properties.

Last Answer : Lime Mortar:-Lime Mortar is a paste prepared by adding required quantity of water to a mixture of lime and fine aggregate like sand. Properties of Lime Mortar : 1)It should be capable of ... not develop cracks and they should be able  To maintain their appearance for a sufficiently long period.

Define seasoning of timber. Explain artificial seasoning with sketch.

Description : Define seasoning of timber. Explain artificial seasoning with sketch.

Last Answer : Definition of seasoning:  Seasoning is process by which moisture content in freshly cut tree is reduced to a suitable level. Artificial seasoning: 1.Boiling - In this method timber is immersed in ... has been tried in some plywood industries but not in seasoning of timber on mass scale.

Explain various types of Cement and also state the uses.

Description : Explain various types of Cement and also state the uses.

Last Answer : Following are the various types of cement: 1.Ordinary Portland Cement:-  This Cement is the basic Portland cement and is used in general for most of the construction work. this cement is used at situations ... agent to the ordinary cement. Uses: It is used for making pre cast products.

Enlist the methods of quarrying and explain any one in brief.

Description : Enlist the methods of quarrying and explain any one in brief.

Last Answer : The process of taking out stones from natural rock beds is known as quarrying of Stones. Methods of Quarrying of Stones: -  1.Digging  2.Heating  3.Wedging  4.Blasting  1. Digging ... Large blocks of stones are obtained by using blasting powder but small blocks are obtained by using dynamite.

Explain the manufacturing of burnt clay brick.

Description : Explain the manufacturing of burnt clay brick.

Last Answer : Manufacturing of Burnt Clay Brick consists of a) Preparation of clay. B) Moulding c) Drying d) Burning. a) Preparation of Clay: Unsoiling of clay consists of removal or vegetations and ... the bricks are stacked without any fuel and burnt from fire places and produces better quality of bricks.

Define lime and explain manufacturing of lime by continuous kiln with neat sketch.

Description : Define lime and explain manufacturing of lime by continuous kiln with neat sketch.

Last Answer : Lime: The moisture and carbon dioxide are removed from the limestone by the process of calcination and the product which is remained after removing the moisture and carbon dioxide is termed as lime. The ... with as of fuel. Its thermal efficiency is however higher than of other furnaces.

Explain with neat sketch patterns provided in the dressing of trap stone.

Description : Explain with neat sketch patterns provided in the dressing of trap stone.

Last Answer : Following Patterns are provided in the dressing of stones 1. Hammer Dressing: In this case, stone blocks are roughly made rectangular by means of wallers hammer. The exposed face is roughly shaped by a ... , most of the projections are removed and it gives fine surface to the stone face.   

Explain defects in timber with neat sketch.

Description : Explain defects in timber with neat sketch.

Last Answer : Types of Defects in timber are grouped into the following divisions. The main natural forces responsible for causing defects in timber are abnormal growth and rapture of tissues. 1. Knots: Bases of ... gall indicates abnormal growth and peculiar curved swellings found on the body of a tree.  

Enlist constituents of Plaster of Paris and state the two uses of Plaster of Paris

Description : Enlist constituents of Plaster of Paris and state the two uses of Plaster of Paris

Last Answer : The constituents of POP are It consists of calcium sulphate. It is chemically CaSO4. 1/2 H2O. It is obtained by calcining gypsum at 120 deg. C. by removing ¾ of water of crystallization. ... Used by orthopedic surgeon for setting bones g) Used for wall plasters, wall boards, structural tiles.

State four types of special mortars and give one use of each

Description : State four types of special mortars and give one use of each

Last Answer : a) Fire resistant mortars: Uses: a) Used with fire bricks for lining furnaces b) Used at fire places, ovens etc. b) Injection mortar: Uses: a) For protecting the reinforcement from ... room in hospitals and clinics f) Light weight mortar: Used in sound proof and heat proof constructions.

State any two properties and any two uses of fly ash

Description : State any two properties and any two uses of fly ash

Last Answer : Properties: a) It contains SiO2, Al2O3, Fe2O3, CaO and some toxic elements b) Flyash together with bottom ash is a non-hazardous material c) These particles are spherical in shape d) ... reclamation l) Used in cement production m) Production of roller compacted concrete n) Used in geopolymers

Define asphalt and state any three properties of asphalt.

Description : Define asphalt and state any three properties of asphalt.

Last Answer : Definition: It is a form of bitumen which is sticky, black and viscous liquid or semisolid in nature. Aggregates + bitumen = asphalt. OR It is an artificial mixture of bitumen and inert matter like alumina, ... cooled. 8. It is tough and durable material 9. It is soluble in C2S, Benzene, Naptha

State the properties and uses of distemper

Description : State the properties and uses of distemper 

Last Answer : Properties: a) Less durable than paint b) Easy to apply c) Poor workability d) Available in variety of shades e) Costly f) Gives smooth and pleasing surface g) Uses: a) ... surfaces on plastered cement concrete of buildings  b) To paint the buildings from outside in areas of low rainfall

State important properties and uses of geopolymer cement

Description : State important properties and uses of geopolymer cement 

Last Answer : Properties: a) It gain ultimate strength within 24 hours and cures more rapidly than OPC. b) It has an ability to form strong chemical bond with all types of reagents and water. c)It ... of fresh water via the elimination of fly-ash disposal sites. h) Various applications in building industry

Suggest the type of glass used for the following work: i) Making panel of partition wall ii) Cashier Cabin iii) Skylight iv) Door Shutter

Description : Suggest the type of glass used for the following work: i) Making panel of partition wall ii) Cashier Cabin iii) Skylight iv) Door Shutter

Last Answer : i) Making panel of partition wall: Block glass OR Sheet Glass OR chipped and ground glass OR soda lime glass ii) Cashier Cabin-Polished plate glass OR bullet proof glass OR soda lime glass OR laminated ... clear window glass or lead glass iv) Door Shutter: Soda lime glass OR tempered glass

Draw cross section of timber. Give any four engineering properties of timber.

Description : Draw cross section of timber. Give any four engineering properties of timber.

Last Answer : Properties of Timber: 1. Appearance: A Freshly cut timber should have shining appearance 2. Colour: The Colour of the timber should be dark. Light colour of timber indicates low strength. ... : Good timber should be free from defects 10. Texture: The texture of timber should be even