Under normal condition 100ml blood deliver `________________`

Under normal condition 100ml blood deliver `________________`
by

1 Answer

Answer :

Under normal condition 100ml blood deliver `________________` A. 4 ml `O_(2)` B. 10ml `O_(2)` C. 5ml `O_(2)` D. 25 ml `O_(2)`
by

Related questions

Under normal physiological condition every 100 ml of oxygenated blood can deliver ____ml of `O_(2)`

Description : Under normal physiological condition every 100 ml of oxygenated blood can deliver ____ml of `O_(2)`

Last Answer : Under normal physiological condition every 100 ml of oxygenated blood can deliver ____ml of `O_(2)`

Under normal physiological condition every 100 ml of oxygenated blood can deliver ____ml of `O_(2)`

Description : Under normal physiological condition every 100 ml of oxygenated blood can deliver ____ml of `O_(2)`

Last Answer : Under normal physiological condition every 100 ml of oxygenated blood can deliver ____ml of `O_(2)`

The blood cholesterol level in 100ml of blood in a normal person varies between (1) 150 and 200 mg (2) 120 and 200 mg (3) 100 and 180 mg (4) 80 and 160 mg

Description : The blood cholesterol level in 100ml of blood in a normal person varies between (1) 150 and 200 mg (2) 120 and 200 mg (3) 100 and 180 mg (4) 80 and 160 mg

Last Answer : (1) 150 and 200 mg Explanation: Cholesterol is defined as a waxy alcohol, fat-like substance that occurs naturally in all areas of the human body. Cholesterol is measured in milligrams per 100 ... to be normal blood cholesterol; 200-239 mg/dL borderlinehigh; and > 240 mg/dl high cholesterol.

Normal value of plasma total proteins varies between (A) 3–4 gm/100ml (B) 6–8 gm/100ml (C) 10–12 gm/100ml (D) 14–16 gm/100ml

Description : Normal value of plasma total proteins varies between (A) 3–4 gm/100ml (B) 6–8 gm/100ml (C) 10–12 gm/100ml (D) 14–16 gm/100ml

Last Answer : Answer : B

100ml. Pure blood carries `:-`

Description : 100ml. Pure blood carries `:-`

Last Answer : 100ml. Pure blood carries `:-` A. `1.34 ml. O_(2)` B. 20 ml. `O_(2)` C. 15 ml. `O_(2)` D. 4 ml. `O_(2)`

Every 100ml deoxygenated blood delivers around `___________________` `CO_(2)` to alveoli `:-`

Description : Every 100ml deoxygenated blood delivers around `___________________` `CO_(2)` to alveoli `:-`

Last Answer : Every 100ml deoxygenated blood delivers around `___________________` `CO_(2)` to alveoli `:-` A. 20ml B. 4 ml C. 5 ml D. 25ml

Marketers must be able to count on their carriers to deliver goods on time and in an acceptable condition. Another name for this consistency of service is A)accessibility. B)capability. C)adaptability. D)reliability.

Description : Marketers must be able to count on their carriers to deliver goods on time and in an acceptable condition. Another name for this consistency of service is A)accessibility. B)capability. C)adaptability. D)reliability.

Last Answer : D)reliability.

If I know, say, the mass of precipitated PbCrO4 when I mixed PbCl2 solution (100mL exact) and K2CrO4 (excess), how would I go about calculating the original concentrations of Pb2+ and Cl- in the original PbCl2 solution?

Description : If I know, say, the mass of precipitated PbCrO4 when I mixed PbCl2 solution (100mL exact) and K2CrO4 (excess), how would I go about calculating the original concentrations of Pb2+ and Cl- in the original PbCl2 solution?

Last Answer : Are you certain that your answer is incorrect? Ksp=[Pb][CrO4], and as you add K2CrO4, you are increasing the concentration of CrO4 in solution, and the equilibrium position must shift such that the ... wrong. I would be very interested in knowing, given that I take my chemistry AP test on Tuesday.

What is the function of Diprosal 50mg / 100ml cream ?

Description : What is the function of Diprosal 50mg / 100ml cream ?

Last Answer : It should be used according to doctor's advice in allergies and itching.

Assertion` :-` Major part of `CO_(2)` is transported in the form of sodium bicarbonate. Reason `:-` 0.3 ml of `CO_(2)` is transported per 100ml of blo

Description : Assertion` :-` Major part of `CO_(2)` is transported in the form of sodium bicarbonate. Reason `:-` 0.3 ml of `CO_(2)` is transported per 100ml of blo

Last Answer : Assertion` :-` Major part of `CO_(2)` is transported in the form of sodium bicarbonate. Reason `: ... False. D. If both Assertion & Reason are false.

On treatment of 100mL of 0.1 M solution of `CoCl_(3).6H_(2)O` with excess `AgNO_(3),1.2xx10^(22)` ions are precipitated. The complex is :

Description : On treatment of 100mL of 0.1 M solution of `CoCl_(3).6H_(2)O` with excess `AgNO_(3),1.2xx10^(22)` ions are precipitated. The complex is :

Last Answer : On treatment of 100mL of 0.1 M solution of `CoCl_(3).6H_(2)O` with excess `AgNO_(3),1.2xx10^(22)` ions are ... `[Co(H_(2)O)_(4)Cl_(2)]Cl.2H_(2)O`

If a solution has a concentration of 75g per 100ml what does that mean?

Description : If a solution has a concentration of 75g per 100ml what does that mean?

Last Answer : Need answer

If 1 litre costs 70p what will 100ml cost?

Description : If 1 litre costs 70p what will 100ml cost?

Last Answer : 7pBegin by converting ml to litres: 100ml = 0.1l1l = 70 p.1l = xTo solve for x, cross multiply then divide.70p * .1 litre / 1 litre = 7p(While it would be ... recognizing thepattern, always cross multiply because the numbers will not alwaysperfectly work out, especially when decimals are involved)

What item in a grocery store can hold less than 100mL?

Description : What item in a grocery store can hold less than 100mL?

Last Answer : a eye dropper

In serum product of Ca x p (in mg/100ml) in children is normally (A) 20 (B) 30 (C) 50 (D) 60

Description : In serum product of Ca x p (in mg/100ml) in children is normally (A) 20 (B) 30 (C) 50 (D) 60

Last Answer : Answer : C

While designing shaft on the basis of torsional rigidity, angle of twist is given by? a) 100Ml/Gd⁴ b) 584Ml/Gd⁴ c) 292 Ml/Gd⁴ d) 300 Ml/Gd⁴

Description : While designing shaft on the basis of torsional rigidity, angle of twist is given by? a) 100Ml/Gd⁴ b) 584Ml/Gd⁴ c) 292 Ml/Gd⁴ d) 300 Ml/Gd⁴

Last Answer : b) 584Ml/Gd⁴

Does USPS deliver a package to the home under secret service protection?

Description : Does USPS deliver a package to the home under secret service protection?

Last Answer : The packages went to the security detail at the residences.

Any postal article suspected to contain any goods of which the transmission by post is prohibited by or under any enactment for the time being in force is received for delivery at a post office: (A) That post office will deliver the article to the addressee without any interference (B) The officer incharge of the post office will issue notice to the addressee inviting him to attend post office and shall in his presence open and examine the postal articles (C) The officer incharge of the post office will open and examine the postal article in presence of the postal staff (D) The officer incharge shall send the postal article to RLO for disposa

Description : Any postal article suspected to contain any goods of which the transmission by post is prohibited by or under any enactment for the time being in force is received for delivery at a post office: (A ... of the postal staff (D) The officer incharge shall send the postal article to RLO for disposa

Last Answer : (B) The officer incharge of the post office will issue notice to the addressee inviting him to attend post office and shall in his presence open and examine the postal articles

in many cases, it is reasonable to refer to the ________________ as the price. -General Knowledge

Description : in many cases, it is reasonable to refer to the ________________ as the price. -General Knowledge

Last Answer : opportunity cost.

the decision to pass another vehicle requires ________________. -General Knowledge

Description : the decision to pass another vehicle requires ________________. -General Knowledge

Last Answer : The decision to pass another vehicle requires is good judgment.

Fill in the blanks (i) Viruses, worms and trojans are collectively named ________________. -Technology

Description : Fill in the blanks (i) Viruses, worms and trojans are collectively named ________________. -Technology

Last Answer : (i) Malware(ii) (iii) Web browser(iv) Website(v) (vi) Worm(vii) href(viii) Spyware(ix) Quotes(x) Trojan Horse

`sqrt(-m^(6))`=________________

Description : `sqrt(-m^(6))`=________________

Last Answer : `sqrt(-m^(6))`=________________

`3sqrt(0.125)+3sqrt(0.729)`=________________

Description : `3sqrt(0.125)+3sqrt(0.729)`=________________

Last Answer : `3sqrt(0.125)+3sqrt(0.729)`=________________

He IAC must use the KSMS as the ________________ method for making shippers with an address within the United States known:?

Description : He IAC must use the KSMS as the ________________ method for making shippers with an address within the United States known:?

Last Answer : primary

Hydrogen sometimes is ________________ an electron and sometimes it has an _____________ electron.?

Description : Hydrogen sometimes is ________________ an electron and sometimes it has an _____________ electron.?

Last Answer : dd

He IAC must use the KSMS as the ________________ method for making shippers with an address within the United States known:?

Description : He IAC must use the KSMS as the ________________ method for making shippers with an address within the United States known:?

Last Answer : primary

Hydrogen sometimes is ________________ an electron and sometimes it has an _____________ electron.?

Description : Hydrogen sometimes is ________________ an electron and sometimes it has an _____________ electron.?

Last Answer : dd

Solid injection is also called ________________ a) air injection b) mechanical injection c) compression fuel injection d) none of the mentioned

Description : Solid injection is also called ________________ a) air injection b) mechanical injection c) compression fuel injection d) none of the mentioned

Last Answer : Answer: b Explanation: Generally, solid injection is also called mechanical injection.

If one or more nozzles are not spraying correctly then ________________ occurs. a) dripping b) misfiring c) cold firing d) none of the mentioned

Description : If one or more nozzles are not spraying correctly then ________________ occurs. a) dripping b) misfiring c) cold firing d) none of the mentioned

Last Answer : Answer: b Explanation: If one or more nozzles are not spraying correctly then misfiring occurs and not cold firing.

The smallest unit of data in computer is ________________ a) Byte b) Nibble c) Bit d) KB

Description : The smallest unit of data in computer is ________________ a) Byte b) Nibble c) Bit d) KB

Last Answer : Answer: c Explanation: A bit is defined as the smallest unit of data in a computer system. It is used as a short form of Binary Digit. A bit can have only two values 0 or 1. A nibble comprises of 4 bits, a byte is a collection of 8 bits whereas KB (Kilobyte) is equal to 1024 bytes

Where automatic restart does not present a hazard after a power failure, Coast Guard Regulations (46 CFR) require motor controllers for auxiliaries vital to the propelling equipment to be provided with ________________. A. overload protection B. low voltage protection C. low voltage release D. reverse current protection

Description : Where automatic restart does not present a hazard after a power failure, Coast Guard Regulations (46 CFR) require motor controllers for auxiliaries vital to the propelling equipment to be provided ... overload protection B. low voltage protection C. low voltage release D. reverse current protection

Last Answer : Answer: C

An open in the armature of a DC motor is suspected, but is not found by visual inspection of the commutator. The next step in troubleshooting this problem is to ________________. A. conduct a bar to bar test of the armature B. visually inspect the armature windings C. conduct an insulation resistance test of the armature D. test the commutator for a ground

Description : An open in the armature of a DC motor is suspected, but is not found by visual inspection of the commutator. The next step in troubleshooting this problem is to ________________. A. conduct a ... windings C. conduct an insulation resistance test of the armature D. test the commutator for a ground

Last Answer : Answer: A

When disassembling electric motors for maintenance or overhaul, ________________. A. punch mark frame and end bells for proper assembly B. wrap bearings in lint free cloths if they are to be reused C. tag and store small parts in a box D. all of the above

Description : When disassembling electric motors for maintenance or overhaul, ________________. A. punch mark frame and end bells for proper assembly B. wrap bearings in lint free cloths if they are to be reused C. tag and store small parts in a box D. all of the above

Last Answer : Answer: D

Seating the brushes on a D.C. motor is first accomplished using ________________. A. a file for cutting the approximate curvature followed by sandpaper for the final fit B. sandpaper with the motor not operating and then a seating stone while running the machine C. emery paper for the initial cut and crocus cloth for the finishing cut D. course lapping compound, followed by a medium and then a fine grade

Description : Seating the brushes on a D.C. motor is first accomplished using ________________. A. a file for cutting the approximate curvature followed by sandpaper for the final fit B. sandpaper with the motor not ... for the finishing cut D. course lapping compound, followed by a medium and then a fine grade

Last Answer : Answer: B

The dielectric strength of a vacuum or dry air is approximately ________________. A. 450 volts/inch B. 1000 volts/inch C. 20-kv/inch D. 50-kv/inch

Description : The dielectric strength of a vacuum or dry air is approximately ________________. A. 450 volts/inch B. 1000 volts/inch C. 20-kv/inch D. 50-kv/inch

Last Answer : Answer: C

A 'dielectric' is a/an ________________. A. electrical insulator B. current flow C. good conductor D. semiconductor material

Description : A 'dielectric' is a/an ________________. A. electrical insulator B. current flow C. good conductor D. semiconductor material

Last Answer : Answer: A

If a fuse of correct size and type blows frequently, ________________. A. try the next higher amperage rating B. try the next lower amperage rating C. look for trouble within the circuit D. reduce the applied voltage 10%

Description : If a fuse of correct size and type blows frequently, ________________. A. try the next higher amperage rating B. try the next lower amperage rating C. look for trouble within the circuit D. reduce the applied voltage 10%

Last Answer : Answer: C

Compressed air should not be used to clean motor controller equipment because ________________. A. it may force metallic particles into coil insulation B. the surrounding area may need additional cleaning C. the air blast dries out insulation quickly D. a mask and respirator would be required

Description : Compressed air should not be used to clean motor controller equipment because ________________. A. it may force metallic particles into coil insulation B. the surrounding area may need additional cleaning C. the air blast dries out insulation quickly D. a mask and respirator would be required

Last Answer : Answer: A

Motor controllers are seldom troubled by grounds because ________________. A. cabinet heaters always keep internal components dry B. special insulation is used on wire for vital circuits C. shock mounts on controller panels greatly reduce vibration D. contactors and relays are mounted on nonconducting panels

Description : Motor controllers are seldom troubled by grounds because ________________. A. cabinet heaters always keep internal components dry B. special insulation is used on wire for vital circuits C. ... on controller panels greatly reduce vibration D. contactors and relays are mounted on nonconducting panels

Last Answer : Answer: D

The amount of mechanical force or torque produced by an electric motor depends on the ________________. A. strength of its magnetic field B. amount of armature current flow C. length of conductor in the field D. all of the above

Description : The amount of mechanical force or torque produced by an electric motor depends on the ________________. A. strength of its magnetic field B. amount of armature current flow C. length of conductor in the field D. all of the above

Last Answer : Answer: D

As shown in the illustrations, ordered rudder angle is fed back from the ________________. EL-0097 A. power unit to the magnetic amplifier B. steering gear to the control potentiometer C. magnetic amplifier to the steering gear D. rudder yoke to the non-followup controller

Description : As shown in the illustrations, ordered rudder angle is fed back from the ________________. EL-0097 A. power unit to the magnetic amplifier B. steering gear to the control potentiometer C. magnetic amplifier to the steering gear D. rudder yoke to the non-followup controller

Last Answer : Answer: A

You can determine if a circuit breaker has tripped by ________________. A. examining the position of the handle B. checking for which of the breakers is warm C. looking for a burned-out link D. all of the above

Description : You can determine if a circuit breaker has tripped by ________________. A. examining the position of the handle B. checking for which of the breakers is warm C. looking for a burned-out link D. all of the above

Last Answer : Answer: A

When checking the specific gravity of the battery electrolyte with a hydrometer, you should be aware that ________________. A. the battery is fully charged when the float sinks deepest into the electrolyte B. the battery is discharged when the float is highest in the electrolyte C. a hydrometer reading is accurate if taken immediately after water is added to the cell D. warm temperatures will lower the specific gravity of the electrolyte

Description : When checking the specific gravity of the battery electrolyte with a hydrometer, you should be aware that ________________. A. the battery is fully charged when the float sinks deepest into the ... is added to the cell D. warm temperatures will lower the specific gravity of the electrolyte

Last Answer : Answer: D

The seven segment arrangement for numerical display on consoles, test meters and other applications can be either ________________. A. UJT or BJT B. BCD or OCD C. JFET or IGFET D. LED or LCD

Description : The seven segment arrangement for numerical display on consoles, test meters and other applications can be either ________________. A. UJT or BJT B. BCD or OCD C. JFET or IGFET D. LED or LCD

Last Answer : Answer: D

A silicon controlled rectifier (SCR) is a solid state device used to change ________________. A. DC to AC and control relatively low load current B. AC to DC and control relatively high load current C. DC to AC and control relatively high load current D. AC to DC and control relatively low load current

Description : A silicon controlled rectifier (SCR) is a solid state device used to change ________________. A. DC to AC and control relatively low load current B. AC to DC and control relatively high load ... to AC and control relatively high load current D. AC to DC and control relatively low load current

Last Answer : Answer: B

A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two back-to-back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Description : A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two ... -back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Last Answer : Answer: C

Local action in a dry-cell, or lead-acid storage battery is the process whereby ________________. A. hydrogen gas is liberated B. the electrolyte compensates for overcharging C. potassium hydroxide absorbs carbon dioxide from the air D. the battery becomes discharged without being connected to a load

Description : Local action in a dry-cell, or lead-acid storage battery is the process whereby ________________. A. hydrogen gas is liberated B. the electrolyte compensates for overcharging C. potassium hydroxide ... carbon dioxide from the air D. the battery becomes discharged without being connected to a load

Last Answer : Answer: D