Is it possible to use old plaster again?

We are doing reconstruction. Do we have to throw out the old plaster? Or is it reusable?
by

1 Answer

Answer :

If it is lime plaster, it could be reused. Re-enchant her. add lime and stir again. Use it, for example, for masonry. Due to the complexity, very little is used today. If we count the time, it is cheaper to throw away the old plaster.
by

Related questions

Solutions for hanging pictures in old plaster walls?

Description : Solutions for hanging pictures in old plaster walls?

Last Answer : answer:Have you tried using heavy duty wall anchors? Metal ones

When to use plaster and when mortar

Description : I have a hole in the wall I need to make. She's about the size of a fist. Should I use plaster or mortar? Thanks

Last Answer : Be sure to use mortar. Plaster would fall out. Only smaller holes are repaired with plaster.

Need a lot of home repairs roof Leaking, floor tile bathroom coming off of floor, toilet leaks not able to use bedroom no insulation on home addition. plaster falling from ceiling ,retired on fixed income?

Description : Need a lot of home repairs roof Leaking, floor tile bathroom coming off of floor, toilet leaks not able to use bedroom no insulation on home addition. plaster falling from ceiling ,retired on fixed income?

Last Answer : Where can I get grants that don,t need to pay bacK?

Why on earth would someone buy a brand new car then plaster it with political bumper stickers?

Description : Why on earth would someone buy a brand new car then plaster it with political bumper stickers?

Last Answer : apparently she is really into the election and SERIOUSLY wants to she everyone who she supports. I’m one who doesn’t like bumper stickers on my vehicle but enjoy reading “silly” ones on others vehicles. i prefer the ones that make you laugh at.

Write an equation to show the reaction between Plaster of Paris and water -SST 10th

Description : Write an equation to show the reaction between Plaster of Paris and water -SST 10th

Last Answer : ' solutions : -

Why is plaster of paris stored in a moisture proof container? -Chemistry-10

Description : Why is plaster of paris stored in a moisture proof container? -Chemistry-10

Last Answer : Plaster of Paris in contact with moisture (water) changes to solid hard mass, gypsum. Therefore, it gets wasted. Hence it should be stored in moisture proof containers.

Who makes plaster of Paris? -General Knowledge

Description : Who makes plaster of Paris? -General Knowledge

Last Answer : answer:

Is Plaster of Paris organic or in organic?

Description : Is Plaster of Paris organic or in organic?

Last Answer : Surely Inorganic ✌️

What is Plaster of Paris ?

Description : What is Plaster of Paris ?

Last Answer : : Calcium carbonate composed of two atoms of water is called plaster of Paris.

What is plaster pattern ?

Description : What is plaster pattern ?

Last Answer : The pattern made from gypsum cement is called plaster pattern .

What is the exact composition of the plaster mortar?

Description : What to put in the plaster mortar? What is its composition? 

Last Answer : 1 tablespoon lime 2 tablespoons sand 1 tablespoon cement.

Hello, I would like to ask if it is better to scrape the plaster before painting or to level the wall in some way and if so how? Thank you

Description : Painting a room, leveling a wall.

Last Answer : Scraping before painting only old paint is scraped off, not plaster. it only scratches when there are already more layers on the wall. Normal leveling of the walls is done with plaster, minor unevenness is ... scraped, penetrated and a new layer of stucco applied. The wall is then like new.

A hole in the plaster and a cracked corner

Description : Hello, I need advice. I've never done it before, so I'd rather find out more so I don't let it go. In the corner of the room, plaster spilled down to the brick. There is a hole about 20x10 cm. Part ... how to do it correctly, so that I don't have to deal with it again in half a year. Thanks a lot

Last Answer : It can be assumed that this is an older plaster, made in the classic way. Remove any loose, bulging or otherwise damaged plaster. First put a spray, a little cement and a little sand ... recommend soaking the entire walls properly and scraping everything that allows it with a flexible spatula.

Mixing plaster with tone color

Description : Can the tinting paint intended for Primalex be put directly into the plaster?

Last Answer : Of course it can. At the end of mixing the plaster, drip a few drops of paint to the desired shade.

How long to let the plaster dry before repainting?

Description : I dug holes in the walls of the nails with plaster. How long can I paint? Tomorrow morning, the plaster will be 100% dry, right?

Last Answer : Nail holes per hour.

gluing artificial stone to the plaster

Description : hello, I want to glue an artificial stone to the wall in the apartment, will it be enough to scrape the paint, penetrate and glue ?? It's lightweight concrete. Do you have any experience ??

Last Answer : Well, really ... you really don't want to wrap the plaster? ... Well, you don't have to, but you'll have to roughen it ... you need this. even on the ceiling ..: D you glue it will keep it clear ...: ... then holds the whole not every stove special so you would not be afraid ..: D ☢ ☠ ☣ ☠ ☣ ☠ ☣ ☠ ☢

How does plaster cut?

Description : Can't the doctor cut my leg?

Last Answer : No it won't happen. He usually cuts it with scissors or cuts it with a pad.

Poorly fused bone in plaster

Description : I feel that my broken arm has grown badly. What if that's the case? Will they let me or will they break it?

Last Answer : Only your doctor will answer this question. And even if he's here, he'll only answer if he sees an X-ray. shot.

plaster - snowfall

Description : Hello, three years ago we built a brick house from Porotherm and used thermal plaster from the outside. There were small balls of polystyrene in the bagged mixture. I've been watching a weird thing for ... inside the plaster? If you have any idea, possible explanation, write to me. Thank you. Marie

Last Answer : I recommend contacting the plaster manufacturer / seller and consulting the application procedure. If an error was made during application, the manufacturer should detect it.

Can plaster be preserved?

Description : So that it doesn't harden how to keep it divided until tomorrow?

Last Answer : Cannot

will vibration from a hot tub damage plaster walls?

Description : will vibration from a hot tub damage plaster walls?

Last Answer : Need Answer

Plaster Repair?

Description : Plaster Repair?

Last Answer : form_title=Plaster Repair form_header=10343 Please specify the type of damage you require repair for. (Select all that apply)*= [] Restore deteriorating ornamental plaster [] Efflorescence (fluffy white powder forms on ... ) [] Water damage in ceiling(s) [] Water damage around tub or shower [] Other

Which of the following mineral is used in cement industry and plaster of paris? A. Marble B. China Clay C. Gypsum D. Fire Clay

Description : Which of the following mineral is used in cement industry and plaster of paris? A. Marble B. China Clay C. Gypsum D. Fire Clay

Last Answer : ANSWER: C

Which of the following mineral is used in cement industry and plaster of paris? A. Marble B. China Clay C. Gypsum D. Fire Clay

Description : Which of the following mineral is used in cement industry and plaster of paris? A. Marble B. China Clay C. Gypsum D. Fire Clay

Last Answer : ANSWER: C

Which of the following is used for wrapping of fractured bones? (1) White cement (2) White lead (3) Zinc oxide (4) Plaster of Paris

Description : Which of the following is used for wrapping of fractured bones? (1) White cement (2) White lead (3) Zinc oxide (4) Plaster of Paris

Last Answer : (4) Plaster of Paris Explanation: Plaster of Paris is a plaster made by calcining gypsum. It can be used to impregnate gauze bandages to make a sculpting material called modroc. It is used ... (and sometimes still is) used to make classic plaster orthopedic casts to protect limbs with broken bones.

The chemical name of "Plaster of Paris" commonly used for setting broken bones is – (1) Calcium nitrate (2) Calcium sulphate (3) Calcium carbonate (4) Calcium chloride

Description : The chemical name of "Plaster of Paris" commonly used for setting broken bones is – (1) Calcium nitrate (2) Calcium sulphate (3) Calcium carbonate (4) Calcium chloride

Last Answer : (2) Calcium sulphate Explanation: Plaster of Paris is the common name of Calcium Sulphate hemihydrate, with chemical formula: CaSO4.1/2H2O. Plaster of Paris is produced by heating gypsum to about 150°C.

‘Plaster of paris’ chemically known as (1) Sodium Aluminate (2) Calcium sulphate (3) Spdium bicarbonate (4) Sodium acetate

Description : ‘Plaster of paris’ chemically known as (1) Sodium Aluminate (2) Calcium sulphate (3) Spdium bicarbonate (4) Sodium acetate

Last Answer : (2) Calcium sulphate Explanation: Calcium sulphate is a calcium salt that is used for a variety of purposes. It exists in various forms and states of hydration.

'Plaster of Paris' is made by partial dehydration of – (1) epsom salt (2) gypsum salt (3) blue vitriol (4) green vitriol

Description : 'Plaster of Paris' is made by partial dehydration of – (1) epsom salt (2) gypsum salt (3) blue vitriol (4) green vitriol

Last Answer : (2) gypsum salt Explanation: Plaster is a building material used for coating walls and ceilings. Plaster starts as a dry powder similar to mortar or cement and like those materials it is ... sandpaper. These characteristics make plaster suitable for a finishing, rather than a load-bearing material.

On heating, Gypsum loses certain percentage of its water content and becomes (1) Chalk (2) Calcium sulphate (3) Plaster of Paris (4) a pearl

Description : On heating, Gypsum loses certain percentage of its water content and becomes (1) Chalk (2) Calcium sulphate (3) Plaster of Paris (4) a pearl

Last Answer : (3) Plaster of Paris Explanation: Plaster of paris, quick-setting gypsum plaster consisting of a fine white powder (calcium sulfate hemihydrate), which hardens when moistened and allowed to dry.

Setting of plaster of paris involves – (1) dehydration process (2) hydration to form other hydrates (3) oxidation process (4) reduction process

Description : Setting of plaster of paris involves – (1) dehydration process (2) hydration to form other hydrates (3) oxidation process (4) reduction process

Last Answer : (2) hydration to form other hydrates Explanation: The setting of plaster of Paris takes place by hydration due to the formation of a solid crystalline hydrate and hardening of Plaster of Paris is ... . A slight expansion takes place in the process and heat is evolved. This process is exothermic.

What is formula of plaster of paris?

Description : What is formula of plaster of paris?

Last Answer : 2CaSO4.H2O

Which metal is found in ‘plaster of paris’?

Description : Which metal is found in ‘plaster of paris’?

Last Answer : Calcium

Melamine formaldehyde resin which has a very high anti tacking properties, is not used for the (A) Electrical insulation purpose (B) Tanning of leather (C) Strengthening of plaster of Paris (D) Decorative laminates

Description : Melamine formaldehyde resin which has a very high anti tacking properties, is not used for the (A) Electrical insulation purpose (B) Tanning of leather (C) Strengthening of plaster of Paris (D) Decorative laminates

Last Answer : (C) Strengthening of plaster of Paris

Plaster of Paris:

Description : Plaster of Paris:

Last Answer : Compound of Calcium. When hydrated, the form is rigid. Blessing for broken bones. Also used for architecture designing(Model designing), Sculpures and for filling purposes in different areas.

Explain the following: (i) Blood group (ii) Short circuit (iii) Short sight (iv) International date line (v) Plaster of Paris

Description : Explain the following: (i) Blood group (ii) Short circuit (iii) Short sight (iv) International date line (v) Plaster of Paris

Last Answer : Answers: (i) Blood group A blood type (also called a blood group) is a classification of blood based on the presence or absence of inherited antigenic substances on the surface of red blood ... calcium sulfate hemihydrate, nominally CaSO4 0.5H2O. It is created by heating gypsum to about 150 °C.

Which of the following salts do not have the water of crystalisation? (i) Bleaching Powder (ii) Plaster of Paris (iii) washing soda (iv) Baking soda (a) (ii) and (iv) (b) (i) and (iii) (c) (ii) and (iii) (d) (i) and (iv)

Description : Which of the following salts do not have the water of crystalisation? (i) Bleaching Powder (ii) Plaster of Paris (iii) washing soda (iv) Baking soda (a) (ii) and (iv) (b) (i) and (iii) (c) (ii) and (iii) (d) (i) and (iv)

Last Answer : (d) (i) and (iv)

What is the name and chemical formula of the main product formed by heating baking soda. (a) sodium carbonate,Na 2 CO 3 (b) Bleaching powder ,CaOCl 2 (c) sodium chloride,Na Cl (d)Plaster of paris ,CaSO 4 .I/2H 2 O

Description : What is the name and chemical formula of the main product formed by heating baking soda. (a) sodium carbonate,Na 2 CO 3 (b) Bleaching powder ,CaOCl 2 (c) sodium chloride,Na Cl (d)Plaster of paris ,CaSO 4 .I/2H 2 O

Last Answer : (a) sodium carbonate,Na 2 CO 3

Gypsum is heated at........temperature to form plaster of paris.(a) 110degree Celsius (b) 120degree Celsius (c) 100degree Celsius (d) 101degree Celsius

Description : Gypsum is heated at........temperature to form plaster of paris.(a) 110degree Celsius (b) 120degree Celsius (c) 100degree Celsius (d) 101degree Celsius

Last Answer : (c) 100degree Celsius

At what temperature is gypsum heated to form Plaster of Paris?a) 90°C b) 100°C c) 110°C d) 120°C

Description : At what temperature is gypsum heated to form Plaster of Paris?a) 90°C b) 100°C c) 110°C d) 120°C

Last Answer : b) 100°C

Plaster of Paris is (A) CaSO4 .½H2O (B) Used for setting of broken bones (C) Both (A) and (B) (D) Same as gypsum

Description : Plaster of Paris is (A) CaSO4 .½H2O (B) Used for setting of broken bones (C) Both (A) and (B) (D) Same as gypsum

Last Answer : (C) Both (A) and (B)

Heating of __________ to 120°C, produces plaster of paris. (A) Blue vitriol (B) Gypsum (C) Calcium silicate (D) Calcium sulphate

Description : Heating of __________ to 120°C, produces plaster of paris. (A) Blue vitriol (B) Gypsum (C) Calcium silicate (D) Calcium sulphate

Last Answer : (B) Gypsum

Calcination of gypsum produces (A) Plaster of Paris (B) Salt cake (C) Nitre cake (D) Lime

Description : Calcination of gypsum produces (A) Plaster of Paris (B) Salt cake (C) Nitre cake (D) Lime

Last Answer : (A) Plaster of Paris

Setting of plaster of Paris is accompanied with (A) Hydration (B) Dehydration (C) Hydrolysis (D) Loss of CO2

Description : Setting of plaster of Paris is accompanied with (A) Hydration (B) Dehydration (C) Hydrolysis (D) Loss of CO2

Last Answer : (A) Hydration

CaCl(OCl) is the chemical formula of (A) Hypo (B) Bleaching powder (C) Plaster of Paris (D) Aqua regia

Description : CaCl(OCl) is the chemical formula of (A) Hypo (B) Bleaching powder (C) Plaster of Paris (D) Aqua regia

Last Answer : (B) Bleaching powder

CaSO4 .½H2O is known as (A) Blue vitriol (B) Plaster of Paris (C) Gypsum (D) Zeolite

Description : CaSO4 .½H2O is known as (A) Blue vitriol (B) Plaster of Paris (C) Gypsum (D) Zeolite

Last Answer : (B) Plaster of Paris

Which mineral is used to make the Plaster of Paris?

Description : Which mineral is used to make the Plaster of Paris?

Last Answer : Gypsum.

Plaster of Paris is obtained by calcining (A) Bauxite (B) Gypsum (C) Lime stone (D) None of these

Description : Plaster of Paris is obtained by calcining (A) Bauxite (B) Gypsum (C) Lime stone (D) None of these

Last Answer : Answer: Option B

The local swelling of a finished plaster, is termed (A) Cracking (B) Dubbing (C) Blistering (D) Hacking

Description : The local swelling of a finished plaster, is termed (A) Cracking (B) Dubbing (C) Blistering (D) Hacking

Last Answer : Answer: Option C

Pick up the correct statements from the following: (A) Cracks appear on the plastered surface in the form of hair cracks (B) In brick work, the efflorescence is removed by applying a solution of zinc sulphate and water (C) Excessive thermal variations in the backing or plaster causes the plaster to fall (D) All the above

Description : Pick up the correct statements from the following: (A) Cracks appear on the plastered surface in the form of hair cracks (B) In brick work, the efflorescence is removed by applying a solution ... Excessive thermal variations in the backing or plaster causes the plaster to fall (D) All the above

Last Answer : Answer: Option D

Dampness causes (A) Efflorescence (B) Bleaching of paints (C) Crumbling of plaster (D) Growth of termites

Description : Dampness causes (A) Efflorescence (B) Bleaching of paints (C) Crumbling of plaster (D) Growth of termites

Last Answer : Answer: Option D