Pulley bow

Hello, I got a Predator II Recurve Bow this ********* and I don't know much about it, maybe I could get an answer on this website. I have several years of experience with reflex bows, so I think I have some of the basics, but a pulley bow comes to me as the biggest nut. After checking all the components, I tried to stretch it (empty). In vain. I understand that in the factory setting it is set to more LB than they can squeeze, but I have no idea how to reduce the stretching force and adjust it sensibly to my taste. I read something in the instructions about tightening the screws at the bow arms, when I tried to move the hex with the hex, so nothing happened, just impossible to move with the screw. I also heard something about moving the pulley module, but I don't really understand this operation. Maybe there will be someone who will be able to help. Thanks
by

1 Answer

Answer :

Need Answer
by

Related questions

Two bodies of mass 6 kg and 9 kg are connected with a light inextensile string passing over a smooth pulley with one of the bodies on a smooth inclined plane (θ = 30°) and the other hanging freely from the other end. Show that the time taken by 9 kg to pull 6 kg up the entire length is half the time taken by 6 kg to pull 9 kg over the same plane.

Description : Two bodies of mass 6 kg and 9 kg are connected with a light inextensile string passing over a smooth pulley with one of the bodies on a smooth inclined plane (θ = 30°) and the other hanging freely from the ... kg up the entire length is half the time taken by 6 kg to pull 9 kg over the same plane.

Last Answer : Given: Mass of body A (mA) = 6 kg Mass of body B (mB) = 9 kg Angle of inclination of the plane (θ) = 30° Let's assume that the acceleration of body A (aA) and body B (aB) are in opposite ... we know that the time taken (t) is given by the formula: t = √(2d/a), where d is the distance travelled

If w is the angular velocity of the pulley and T1 and T2 are tensions of driving and driven side then power transmitted equals a.(T1 + T2) w b.(T1 + 2T2) w c.107 dynes d.(T1 - T2) w e.wT1

Description : If w is the angular velocity of the pulley and T1 and T2 are tensions of driving and driven side then power transmitted equals a.(T1 + T2) w b.(T1 + 2T2) w c.107 dynes d.(T1 - T2) w e.wT1

Last Answer : d. (T1 - T2) w

In the second system of pulleys, if there are two pulley blocks having 'n1' and 'n2' pulleys in the first and second pulley blocks respectively, then the velocity ratio of the whole system will be equal to a.2n1 + n2 b.n1 - n2 c.107 dynes d.2n1 + 2n2 e.n1 + n2

Description : In the second system of pulleys, if there are two pulley blocks having 'n1' and 'n2' pulleys in the first and second pulley blocks respectively, then the velocity ratio of the whole system will be equal to a.2n1 + n2 b.n1 - n2 c.107 dynes d.2n1 + 2n2 e.n1 + n2

Last Answer : b. n1 - n2

The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be a.46.4 b.26.74 c.11.6 d.3.2 e.17.7

Description : The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be a.46.4 b.26.74 c.11.6 d.3.2 e.17.7

Last Answer : b. 26.74

System shown in figure is released from rest . Pulley and spring is mass less and friction is absent everywhere. The speed of `5 kg` block when `2 kg`

Description : System shown in figure is released from rest . Pulley and spring is mass less and friction is absent everywhere. The speed of `5 kg` block when `2 kg`

Last Answer : System shown in figure is released from rest . Pulley and spring is mass less and friction is absent everywhere. The ... . 2 m/s D. `4sqrt(2) ` m/s

The string in fig. is passing over small smooth pulley rigidly attached to trolley A. If the speed of trolley is constant and qual to `v_(A)` towards

Description : The string in fig. is passing over small smooth pulley rigidly attached to trolley A. If the speed of trolley is constant and qual to `v_(A)` towards

Last Answer : The string in fig. is passing over small smooth pulley rigidly attached to trolley A. If the speed of trolley is constant ... =0` D. `V_(B)=4/5 V_(A)`

Is a scissors a lever or a pulley?

Description : Is a scissors a lever or a pulley?

Last Answer : Need answer

What is difference between the roller and pulley?

Description : What is difference between the roller and pulley?

Last Answer : Need answer

Is a single fixed pulley superior than a single movable pulley?

Description : Is a single fixed pulley superior than a single movable pulley?

Last Answer : Need answer

If pulley a turn clockwise at 15 rpm how fast and what direction will pulley b turn?

Description : If pulley a turn clockwise at 15 rpm how fast and what direction will pulley b turn?

Last Answer : A simple enough question, but complicated by so many possible variations. For instance, place two cog wheels together so that their teeth mesh. Turn cog A clockwise and cog B will turn anticlockwise ( ... of travel (RPM) would depends on the diametres of the pulley wheels - variations once more!

How can inclined plane and amp a pulley r used to change the amount of force needed to move an object?

Description : How can inclined plane and amp a pulley r used to change the amount of force needed to move an object?

Last Answer : Feel Free to Answer

What compound machine consists of both fixed in movable pulley?

Description : What compound machine consists of both fixed in movable pulley?

Last Answer : Feel Free to Answer

How do i replace crank pulley on 2000 Toyota Tacoma 2.7?

Description : How do i replace crank pulley on 2000 Toyota Tacoma 2.7?

Last Answer : Feel Free to Answer

What is a fixed and movable pulley used together?

Description : What is a fixed and movable pulley used together?

Last Answer : Feel Free to Answer

What type of pulley uses more effort than the load to lift the load from the ground?

Description : What type of pulley uses more effort than the load to lift the load from the ground?

Last Answer : Need answer

In a fixed pulley the effort force is equal to the?

Description : In a fixed pulley the effort force is equal to the?

Last Answer : Mechanical advantage of a fixed pulley

BEARING ID 42MM, OD 75.8MM AND THICKNESS 39MM. WHICH BEARING I CAN USE THIS BEARING WILL BE USING FOR FAN PULLEY?

Description : BEARING ID 42MM, OD 75.8MM AND THICKNESS 39MM. WHICH BEARING I CAN USE THIS BEARING WILL BE USING FOR FAN PULLEY?

Last Answer : Here is a website that lets you put in the specifications of the bearign that you need and it will show you which to buy. from what I can tell, you will need one exactly like what you took out with the exact measurments. http://www.thefind.com/sports/browse-42mm-metric-ball-bearings

how do you remove pulley from motor on a roper dryer?

Description : how do you remove pulley from motor on a roper dryer?

Last Answer : You have to unscrew the hex nut that is attaching the pulley to the motor. It can be relatively difficult so get a torque wrench.

A pulley has a mechanical advantage of 1. What does this tell you about the size and direction of the input and output forces?

Description : A pulley has a mechanical advantage of 1. What does this tell you about the size and direction of the input and output forces?

Last Answer : its like a input or output

Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Description : Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Last Answer : ANSWER : C

A wheel-barrow is an example of – (1) class III lever (2) pulley system (3) class I lever (4) class II lever

Description : A wheel-barrow is an example of – (1) class III lever (2) pulley system (3) class I lever (4) class II lever

Last Answer : (4) class II lever Explanation: In a Type 2 Lever, the load is between the pivot (fulcrum) and the effort. Examples of common tools that use a type 2 lever include: stapler, bottle opener, wheel barrow, nail clippers and nut cracker.

A single fixed pulley is used to draw water from a well because – (1) efficiency is 100% (2) velocity ratio is low (3) mechanical advantage is high (4) force is applied in a convenient direction

Description : A single fixed pulley is used to draw water from a well because – (1) efficiency is 100% (2) velocity ratio is low (3) mechanical advantage is high (4) force is applied in a convenient direction

Last Answer : (4) force is applied in a convenient direction Explanation: A single fixed pulley is used to lift a load upwards by applying efforts downward's. The load and effort move equal distance but in opposite ... apply effort in downward direction. They are used on flag-poles and to draw water from a well.

In the method of tube boring of soil investigation, the following is essential: (A) A tube of about 2 metres length and 20 cm diameter with a cutting edge (B) A flap valve at the bottom of tube is provided to extract the soil sample (C) The tube is raised and lowered by 4 thick rope moving over a pulley suspended on a tripod stand (D) All the above

Description : In the method of tube boring of soil investigation, the following is essential: (A) A tube of about 2 metres length and 20 cm diameter with a cutting edge (B) A flap valve at the bottom of tube is ... and lowered by 4 thick rope moving over a pulley suspended on a tripod stand (D) All the above

Last Answer : Answer: Option D

Explain About Pulley Block?

Description : Explain About Pulley Block?

Last Answer : Pulley block is a block in which two or three group of pulleys are used with a rope to lift and heavy loads. The load is tied in the hook of the movable block and the effort is applied at the end of the rope which comes through the fixed pulley block.

What Are The Uses Of Jockey Pulley?

Description : What Are The Uses Of Jockey Pulley?

Last Answer : Jockey pulley is used to increase the contacting area in between the belt and pulley and also used to press the belt for giving tension.

The gap between the two halves of axle pulley should be a. 0.5 – 1.0 mm c. 3.0 – 4.0 mm b. 2.0 – 3.0 mm d. 5.0 – 5.5 mm

Description : The gap between the two halves of axle pulley should be  a. 0.5 – 1.0 mm c. 3.0 – 4.0 mm b. 2.0 – 3.0 mm d. 5.0 – 5.5 mm

Last Answer : c. 3.0 – 4.0 mm

belt of silk runs over two metal pulleys, one of which is surrounded by a hollow metal sphere. Two electrodes, in the form of comb-shaped rows of sharp metal points, are positioned respectively near to the bottom of the lower pulley and inside the sphere, over the upper pulley. The top electrode is connected to the sphere and the bottom one to the ground. A high DC potential is applied to the upper pulley. A simple version of which equipment is being described here?

Description : belt of silk runs over two metal pulleys, one of which is surrounded by a hollow metal sphere. Two electrodes, in the form of comb-shaped rows of sharp metal points, are positioned ... potential is applied to the upper pulley. A simple version of which equipment is being described here?

Last Answer : Van de Graaff generator.

V -belt are most suitable for a. less space requirements b. use with adjustable pulley foe speed change c. both (a) and (b) d. none of the above

Description : V -belt are most suitable for a. less space requirements b. use with adjustable pulley foe speed change c. both (a) and (b) d. none of the above

Last Answer : c. both (a) and (b)

Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Description : Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Last Answer : d. all the above

Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Description : Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Last Answer : A)ldler pulley

A 5 kilogram mass is lifted at constant velocity from a shop floor by a rope that passes through a pulley attached to the shop's ceiling. Neglecting the mass of the rope and friction in the pulley, what is the approximate tension in the rope? w) 100 newtons x) 50 newtons y) 25 newtons z) 5 newtons

Description : A 5 kilogram mass is lifted at constant velocity from a shop floor by a rope that passes through a pulley attached to the shop's ceiling. Neglecting the mass of the rope and friction in the pulley, what is the approximate tension in the rope? w) 100 newtons x) 50 newtons y) 25 newtons z) 5 newtons

Last Answer : ANSWER: X -- 50 NEWTONS

A wheel-barrow is an example of (1) class III lever (2) pulley system (3) class I lever (4) class II lever

Description : A wheel-barrow is an example of (1) class III lever (2) pulley system (3) class I lever (4) class II lever

Last Answer :  class II lever

A single fixed pulley is used to draw water from a well because (1) efficiency is 100% (2) velocity ratio is low (3) mechanical advantage is high (4) force is applied in a convenient direction

Description : A single fixed pulley is used to draw water from a well because (1) efficiency is 100% (2) velocity ratio is low (3) mechanical advantage is high (4) force is applied in a convenient direction

Last Answer : force is applied in a convenient direction

Have you ever shot a bow and arrow?

Description : Have you ever shot a bow and arrow?

Last Answer : Only the replica ones for school. I was average. I prefer the ones that dont have the wheels on it.

Should I continue to let the ill, elderly guy bow hunt on my property?

Description : Should I continue to let the ill, elderly guy bow hunt on my property?

Last Answer : This might become a self-regulating, non-issue. Last year his aunt told me he probably would not make it another season. Yet, he showed up here at 6:00 AM today. The crossbow (150 pound draw) is already cocked.

What's a kind way to bow out of an event that you're asked to volunteer for, without being offensive to the person requesting?

Description : What's a kind way to bow out of an event that you're asked to volunteer for, without being offensive to the person requesting?

Last Answer : That sounds good, and maybe add a softener like “I hope it’s a good turnout, I look forward to hearing about it!” Sounds more like involvement without obligation.

How long would the staff of a composite bow be for a 28" draw?

Description : How long would the staff of a composite bow be for a 28" draw?

Last Answer : Wow. That is quite an undertaking. I have an old, left handed Ben Pearson BP-52 7329 that is rated at 50 pounds at 28 . It is called 52 inches but when unstrung and sitting on the floor its ... adjustable from 40 to 60# with an 80% let-off. If you want photos or more precise measurements PM me.

Can a Bow (Weapon) be strung with a Guitar string?

Description : Can a Bow (Weapon) be strung with a Guitar string?

Last Answer : Not realistically. Most bowstrings have a tensile strength between 4-8 times the rated draw strength of the bow, so the string on a 60 lb. bow would have a breaking strength of at least 240 lbs. The tension ... is only around 18 lbs. It can take a bit more tension than that, but not 13 times more.

How do groups of actors know when to take a bow?

Description : How do groups of actors know when to take a bow?

Last Answer : answer:I never worked in the theatre, but I know in ballet we were taught how to curtsy. Our instructor counted so we did it together. Maybe they are counting to bow at the same time? Often they ... and then they would all pull down together I would think. I'll be interested to see the answers.

How do you feel about bow ties?

Description : How do you feel about bow ties?

Last Answer : I like them with a tux. Hubby learned to tie his own.

How much damage can Cupid's bow do if he switched to regular bow and arrows?

Description : How much damage can Cupid's bow do if he switched to regular bow and arrows?

Last Answer : I will get back to you, I’ll have to dig my Dieties and Demigods manual out of storage. I think Cupid was listed there as well as his bow.

Does anyone know anything about this bow I just got?

Description : Does anyone know anything about this bow I just got?

Last Answer : answer:Let me get the safety aspect out of the way. A compound bow should never be dry fired (string pulled back and let go without an arrow.). The bow can be damaged, delaminated, or weakened so ... for at least 65 pounds. Practice, practice, practice. You will be sore but it is worth it. Enjoy.

Won't you stand and bow to our latest 20k contributer?

Description : Won't you stand and bow to our latest 20k contributer?

Last Answer : May I begin by saying how glad I am that you contribute here! Congo Rats and WTFG!

Would a long piece of metal work as a bow string?

Description : Would a long piece of metal work as a bow string?

Last Answer : answer:Considering the bow string is intended not to be rubbery and flex back, but to pull the stick backwards would it work? No Also how capable would it be of slicing my forearm when I shoot it? YES

Hunters, What is your preference. Compound Bow, Crossbow, or Firearm.

Description : Hunters, What is your preference. Compound Bow, Crossbow, or Firearm.

Last Answer : answer:How could you leave out dynamite, driving off a cliff, trapping, rope snare and poison? Personally, I do most of my hunting with a flyswatter or rolled-up newspaper.

Can someone give me tips for making a bow and arrow?

Description : Can someone give me tips for making a bow and arrow?

Last Answer : answer:If you just need a simple bow, your best bet is to make a bundle bow. Find some thin, straight(-ish) pieces of wood; these can be branches and saplings. Go for something that has both ... some wood. I've heard you can make a fairly good bundle bow using the bamboo sold as garden stakes.

Who is credited for inventing the bow?

Description : Who is credited for inventing the bow?

Last Answer : John Derek?

What comes to mind when you see someone wearing a bow tie?

Description : What comes to mind when you see someone wearing a bow tie?

Last Answer : They’re going for…something…you know, some kind of a look and some of them do pull off that kind of hip, in an offhanded fashion but most fail miserably. I’ve worn a bowtie once, not with a tux but it was for GenderBender Ball.

What are 4 facts about the bow(music)

Description : What are 4 facts about the bow(music)

Last Answer : I’m guessing this is homework?

Are bow ties cool?

Description : Are bow ties cool?

Last Answer : No!