Is a scissors a lever or a pulley?

1 Answer

Answer :

Need answer

Related questions

Description : A wheel-barrow is an example of – (1) class III lever (2) pulley system (3) class I lever (4) class II lever

Last Answer : (4) class II lever Explanation: In a Type 2 Lever, the load is between the pivot (fulcrum) and the effort. Examples of common tools that use a type 2 lever include: stapler, bottle opener, wheel barrow, nail clippers and nut cracker.

Description : A wheel-barrow is an example of (1) class III lever (2) pulley system (3) class I lever (4) class II lever

Last Answer :  class II lever

Description : Which of the following is not a lever of the first order? a.Pair of Smith's tongs b.Wheel barrow c.Ordinary balance d.Pair of scissors e.107 dynes

Last Answer : b. Wheel barrow

Description : Which of the following is the example of lever of first order? (A) Arm of man (B) Pair of scissors (C) Pair of clinical tongs (D) All of the above

Last Answer : (D) All of the above

Description : Two bodies of mass 6 kg and 9 kg are connected with a light inextensile string passing over a smooth pulley with one of the bodies on a smooth inclined plane (θ = 30°) and the other hanging freely from the ... kg up the entire length is half the time taken by 6 kg to pull 9 kg over the same plane.

Last Answer : Given: Mass of body A (mA) = 6 kg Mass of body B (mB) = 9 kg Angle of inclination of the plane (θ) = 30° Let's assume that the acceleration of body A (aA) and body B (aB) are in opposite ... we know that the time taken (t) is given by the formula: t = √(2d/a), where d is the distance travelled

Description : If w is the angular velocity of the pulley and T1 and T2 are tensions of driving and driven side then power transmitted equals a.(T1 + T2) w b.(T1 + 2T2) w c.107 dynes d.(T1 - T2) w e.wT1

Last Answer : d. (T1 - T2) w

Description : In the second system of pulleys, if there are two pulley blocks having 'n1' and 'n2' pulleys in the first and second pulley blocks respectively, then the velocity ratio of the whole system will be equal to a.2n1 + n2 b.n1 - n2 c.107 dynes d.2n1 + 2n2 e.n1 + n2

Last Answer : b. n1 - n2

Description : The number of revolutions through which a pulley will rotate from rest if its angular acceleration is increased uniformly from zero to 12 rad per sec2 during 4 sec and then uniformly decreased to 0 rad per sec2 during the next 3 sec would be a.46.4 b.26.74 c.11.6 d.3.2 e.17.7

Last Answer : b. 26.74

Description : Hello, I got a Predator II Recurve Bow this Christmas and I don't know much about it, maybe I could get an answer on this website. I have several years of experience with reflex bows, so I ... I don't really understand this operation. Maybe there will be someone who will be able to help. Thanks

Last Answer : Need Answer

Description : System shown in figure is released from rest . Pulley and spring is mass less and friction is absent everywhere. The speed of `5 kg` block when `2 kg`

Last Answer : System shown in figure is released from rest . Pulley and spring is mass less and friction is absent everywhere. The ... . 2 m/s D. `4sqrt(2) ` m/s

Description : The string in fig. is passing over small smooth pulley rigidly attached to trolley A. If the speed of trolley is constant and qual to `v_(A)` towards

Last Answer : The string in fig. is passing over small smooth pulley rigidly attached to trolley A. If the speed of trolley is constant ... =0` D. `V_(B)=4/5 V_(A)`

Description : What is difference between the roller and pulley?

Last Answer : Need answer

Description : Is a single fixed pulley superior than a single movable pulley?

Last Answer : Need answer

Description : If pulley a turn clockwise at 15 rpm how fast and what direction will pulley b turn?

Last Answer : A simple enough question, but complicated by so many possible variations. For instance, place two cog wheels together so that their teeth mesh. Turn cog A clockwise and cog B will turn anticlockwise ( ... of travel (RPM) would depends on the diametres of the pulley wheels - variations once more!

Description : How can inclined plane and amp a pulley r used to change the amount of force needed to move an object?

Last Answer : Feel Free to Answer

Description : What compound machine consists of both fixed in movable pulley?

Last Answer : Feel Free to Answer

Description : How do i replace crank pulley on 2000 Toyota Tacoma 2.7?

Last Answer : Feel Free to Answer

Description : What is a fixed and movable pulley used together?

Last Answer : Feel Free to Answer

Description : What type of pulley uses more effort than the load to lift the load from the ground?

Last Answer : Need answer

Description : In a fixed pulley the effort force is equal to the?

Last Answer : Mechanical advantage of a fixed pulley

Description : BEARING ID 42MM, OD 75.8MM AND THICKNESS 39MM. WHICH BEARING I CAN USE THIS BEARING WILL BE USING FOR FAN PULLEY?

Last Answer : Here is a website that lets you put in the specifications of the bearign that you need and it will show you which to buy. from what I can tell, you will need one exactly like what you took out with the exact measurments. http://www.thefind.com/sports/browse-42mm-metric-ball-bearings

Description : how do you remove pulley from motor on a roper dryer?

Last Answer : You have to unscrew the hex nut that is attaching the pulley to the motor. It can be relatively difficult so get a torque wrench.

Description : A pulley has a mechanical advantage of 1. What does this tell you about the size and direction of the input and output forces?

Last Answer : its like a input or output

Description : Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Last Answer : ANSWER : C

Description : A single fixed pulley is used to draw water from a well because – (1) efficiency is 100% (2) velocity ratio is low (3) mechanical advantage is high (4) force is applied in a convenient direction

Last Answer : (4) force is applied in a convenient direction Explanation: A single fixed pulley is used to lift a load upwards by applying efforts downward's. The load and effort move equal distance but in opposite ... apply effort in downward direction. They are used on flag-poles and to draw water from a well.

Description : In the method of tube boring of soil investigation, the following is essential: (A) A tube of about 2 metres length and 20 cm diameter with a cutting edge (B) A flap valve at the bottom of tube is ... and lowered by 4 thick rope moving over a pulley suspended on a tripod stand (D) All the above

Last Answer : Answer: Option D

Description : Explain About Pulley Block?

Last Answer : Pulley block is a block in which two or three group of pulleys are used with a rope to lift and heavy loads. The load is tied in the hook of the movable block and the effort is applied at the end of the rope which comes through the fixed pulley block.

Description : What Are The Uses Of Jockey Pulley?

Last Answer : Jockey pulley is used to increase the contacting area in between the belt and pulley and also used to press the belt for giving tension.

Description : The gap between the two halves of axle pulley should be  a. 0.5 – 1.0 mm c. 3.0 – 4.0 mm b. 2.0 – 3.0 mm d. 5.0 – 5.5 mm

Last Answer : c. 3.0 – 4.0 mm

Description : belt of silk runs over two metal pulleys, one of which is surrounded by a hollow metal sphere. Two electrodes, in the form of comb-shaped rows of sharp metal points, are positioned ... potential is applied to the upper pulley. A simple version of which equipment is being described here?

Last Answer : Van de Graaff generator.

Description : V -belt are most suitable for a. less space requirements b. use with adjustable pulley foe speed change c. both (a) and (b) d. none of the above

Last Answer : c. both (a) and (b)

Description : Belt Tension can be adjusted by a. idler pulley b. slide rails c. tilting plate drive d. all the above

Last Answer : d. all the above

Description : Desired tension in an open belt drive system can be maintained (without changing center to center distance between two pulley)by using A)ldler pulley. B)slide rail C) Tilting angle. D)none of the above

Last Answer : A)ldler pulley

Description : A 5 kilogram mass is lifted at constant velocity from a shop floor by a rope that passes through a pulley attached to the shop's ceiling. Neglecting the mass of the rope and friction in the pulley, what is the approximate tension in the rope? w) 100 newtons x) 50 newtons y) 25 newtons z) 5 newtons

Last Answer : ANSWER: X -- 50 NEWTONS

Description : A single fixed pulley is used to draw water from a well because (1) efficiency is 100% (2) velocity ratio is low (3) mechanical advantage is high (4) force is applied in a convenient direction

Last Answer : force is applied in a convenient direction

Description : What are this type of scissors called?

Last Answer : They are, indeed, called clever cutters. I had never heard of them, but now that I checked them out, I can see their appeal. That's because recently I bought a pair of scissors to cut my chicken ... hoped it would be (the angle was unwieldy; my wrist hurt because of it). But these look promising.

Description : What are some neat variations of rock-paper-scissors?

Last Answer : I want to answer but the only idea I have is obscene. lol

Description : How do I find the "perfect strategy" for rock-paper-scissors variants? (see details)

Last Answer : I would start by reading up on the mathematics of Game theory. GQ.

Description : Whats that poem about Rock, paper, scissors?

Last Answer : Is this the poem?

Description : In real life we have situations such as: Rock > Scissors, Scissors > paper and Paper > Rock. Is there a type of math to deal with this?

Last Answer : answer:In Modular Arithmetic the numbers wrap around. That might be a good place to start to define the rules mathematically. As a kid we played rock, paper, scissors, bomb,. Symbol for bomb was fist with ... Bomb destroys rock, etc. .... Mod 4 Rock, paper,scissors, lizard, Spock would be Mod 5

Description : What scissors to buy for cutting hair?

Last Answer : Your best bet would be to go to a beauty supply store and ask the people there.

Description : Are scissors which can't cut a sign of the failure of capitalism?

Last Answer : As long as people are willing to buy crap that doesn't work it's a failure of both capitalism and the consumer not demanding or being willing to pay for things that actually do what they are ... write companies to praise them when I buy a product that is well make and actually works as advertised.

Description : How do you play Rock, Paper, Scissors?

Last Answer : ROCK, FLAG, AND EEEAAGGLEEEE!!!!!! =D

Description : Will harm come if you cut hair with scissors?

Last Answer : harm? I think you mean itchiness….

Description : What is the grippy part of kitchen scissors for?

Last Answer : opening jars

Description : can you use kitchen scissors to cut zucchini

Last Answer : Need Answer

Description : The body of a woman is found in bed. Tere are no signs of violence and no marks of any kind on her body. The only evidence is a pair of scissors lying next to her.How did she die? -Riddles

Last Answer : She had drowned. The women was found on a waterbed that had been punctured by scissors while she was slept.

Description : Which enzyme is known as 'molecular scissors'? -Biology

Last Answer : answer:

Description : Why are restriction enzymes called molecular scissors? -Biology

Last Answer : answer:

Description : Highly specific molecular scissors that cut DNA are called -Biology

Last Answer : answer: