Where is porcelain found in Bangladesh ?

by

1 Answer

Answer :

in Bijoypur and Gopalpur of Netrokona district , Nalitabari upazila of Sherpur district , Haitgaon of Chittagong district and Baitul Izzat of Satkania upazila. Besides, porcelain deposits have been found near the surface in Madhyapara , Barapukuria and Dighipara of Dinajpur district and Patnitala of Naogaon district.
by

Related questions

Where is the porcelain found in Bangladesh ?

Last Answer : Porcelain has been found in "Vijaypur" in Bangladesh.

What can I put under a kitchen table and chairs to prevent my new porcelain floor from being scratched?

Description : What can I put under a kitchen table and chairs to prevent my new porcelain floor from being scratched?

Last Answer : I’ll go out on a limb here, but… a rug?

Antique porcelain collectors: how could it appear that two sellers are selling the exact same piece?

Description : Antique porcelain collectors: how could it appear that two sellers are selling the exact same piece?

Last Answer : answer:I don't know anything about Limoges china, but I do believe an ebay seller can have the item on offer elsewhere. Check the listing to see if it mentions being able to withdraw the item from sale ... . It does seem odd if they look identical. It would seem to suggest they are the same piece.

What glue for a broken porcelain plate?

Description : What glue for a broken porcelain plate?

Last Answer : circular file.

How do you sharpen a porcelain knife?

Description : How do you sharpen a porcelain knife?

Last Answer : When you say "porcelain" I assume you mean ceramic. Sharpening a ceramic knife, actually sharpening any knife, is not something you should attempt to do unless trained. The process of actually uses the ... take it to a professional sharpener or send it to the manufacturer (who will do the same).

Is bleach the best way to clean a porcelain sink?

Description : Is bleach the best way to clean a porcelain sink?

Last Answer : answer:i avoid bleach... but that's mostly because i don't like using something so toxic unless necessary. i advise using any sort of mild kitchen cleaner and a soft sponge for general cleaning, and ... must never mix bleach and comet! deadly poisonous gas can ensue. no kidding), and CLR. YMMV...

Elephant in a Porcelain Store

Description : When is it said, "It's like an elephant in a china shop"?

Last Answer : This is said not only when someone is physically rude or behaving in a place where it could easily cause harm, but also when someone is tactless toward another on a topic that might hurt them or cause them mental pain.

How to glue a porcelain vase

Description : Recommend something that the porcelain will hold. Thank you

Last Answer : I would use instant glue.

What country gave the world porcelain?

Description : What country gave the world porcelain?

Last Answer : Need answer

What are the pros and cons to porcelain veneers over caps?

Description : What are the pros and cons to porcelain veneers over caps?

Last Answer : Porcelain veneers remove less enamel from the teeth and are preferrable when you are covering discolorations and small imperfections in the teeth. They are not designed for teeth that are not healthy. On the ... or crowns) are stronger and more durable and will work on teeth that are not as healthy.

Who is a candidate for porcelain veneers?

Description : Who is a candidate for porcelain veneers?

Last Answer : Candidates for porcelain veneers must have strong, healthy teeth. If the teeth are yellowed or stained, have small chips and are slightly crooked or misaligned, then you may be a candidate for veneers.

How much does it cost to get a porcelain veneer?

Description : How much does it cost to get a porcelain veneer?

Last Answer : Porcelain Veneers cost anywhere from 700 to 2000 dollars, depending on longevity and attractiveness.

Is Melamine similar to porcelain, or is it more like a plastic material?

Description : Is Melamine similar to porcelain, or is it more like a plastic material?

Last Answer : Melamine is a strong, lightweight plastic-like material. It's dishwasher safe and scratch-resistant. However, Melamine should not be used in the microwave.

Is this tub made out of porcelain?

Description : Is this tub made out of porcelain?

Last Answer : Yes, the whirpool duet tubs are made of porcelain.

Where can I find porcelain dolls?

Description : Where can I find porcelain dolls?

Last Answer : There are some great websites online where you can buy porcelain dolls.I suggest you look on www.paradisegalleries.com/porcelain-dolls.html or www.xmasfiresale.co.uk/Porcelain+Dolls.

Porcelain Tile?

Description : Porcelain Tile?

Last Answer : form_title= Porcelain Tile form_header= Install beautiful porcelain tile in your home! Where do you want he tile installed?*= _ [50] What are the dimensions of the room?*= _ [50] What size do you want the tile?*= _ [50]

Ceramic & Porcelain Tile Installation?

Description : Ceramic & Porcelain Tile Installation?

Last Answer : form_title=Ceramic & Porcelain Tile Installation form_header=11793 How would you best describe the kind of project this is?*= () Replace existing tile () Repair existing tile () Replace existing non-tile surface () ... going to be placed?*= [] Floor [] Wall [] Tub/Shower [] Countertop [] Backsplash

How do I remove stains from my porcelain sink?

Description : How do I remove stains from my porcelain sink?

Last Answer : I need help with cleaning sinks that are porcelain. I have a porcelain kitchen sink that is stained. How can I remove the stains without scratching the porcelain?

Which of the listed groups of electrical insulation materials is best suited for the highest operating temperatures? A. impregnated cotton and silk B. unimpregnated paper and cotton C. pure glass and quartz D. mica and porcelain with bonding agents

Description : Which of the listed groups of electrical insulation materials is best suited for the highest operating temperatures? A. impregnated cotton and silk B. unimpregnated paper and cotton C. pure glass and quartz D. mica and porcelain with bonding agents

Last Answer : Answer: C

In a cartridge-type fuse, the metal element is contained in a ___________________. A. porcelain window B. thermal cut out C. fiber tube D. flasher device

Description : In a cartridge-type fuse, the metal element is contained in a ___________________. A. porcelain window B. thermal cut out C. fiber tube D. flasher device

Last Answer : Answer: C

Ball mills and tube mills with flint or porcelain balls are used for size reduction of (A) Asbestos (B) Rubber (C) Non-metallic ores (D) Limestone

Description : Ball mills and tube mills with flint or porcelain balls are used for size reduction of (A) Asbestos (B) Rubber (C) Non-metallic ores (D) Limestone

Last Answer : (C) Non-metallic ores

Pebble mills are tumbling mills widely used for grinding in the manufacture of paints & pigments and cosmetic industries, where iron contamination in the product is highly objectionable. Pebbles used in pebble mill are made of (A) Bronze (B) Stainless steel (C) Flint or porcelain (D) Concrete

Description : Pebble mills are tumbling mills widely used for grinding in the manufacture of paints & pigments and cosmetic industries, where iron contamination in the product is highly objectionable. Pebbles used in pebble mill are made of (A) Bronze (B) Stainless steel (C) Flint or porcelain (D) Concrete

Last Answer : (C) Flint or porcelain

The fermenter used in the production of penicillin (by deep fermentation process) is made of (A) Glass (B) Glass lined steel (C) High silicon cast iron (D) Porcelain

Description : The fermenter used in the production of penicillin (by deep fermentation process) is made of (A) Glass (B) Glass lined steel (C) High silicon cast iron (D) Porcelain

Last Answer : (B) Glass lined steel

The fermenter used for the production of ethyl alcohol from molasses is made of (A) Wood (B) Concrete (C) Copper bearing steel (D) Porcelain

Description : The fermenter used for the production of ethyl alcohol from molasses is made of (A) Wood (B) Concrete (C) Copper bearing steel (D) Porcelain

Last Answer : (C) Copper bearing steel

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Water gas generator is made of (A) Carbon steel-brick lined (B) Stainless steel-lead lined (C) Cast iron (D) High carbon steel-porcelain lined

Description : Water gas generator is made of (A) Carbon steel-brick lined (B) Stainless steel-lead lined (C) Cast iron (D) High carbon steel-porcelain lined

Last Answer : (A) Carbon steel-brick lined

Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Description : Concentrated HCl at 30°C can be stored in a vessel made of (A) PTFE and porcelain (B) Cast iron and aluminium (C) Stainless steel and high silicon cast iron (D) None of these

Last Answer : (A) PTFE and porcelain

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Last Answer : (C) Aluminium, tin and rubber

In the Kraft process of sulphate paper pulp manufacture, the black liquor and the white liquor storage tank is made of (A) Concrete (B) Wood (C) Steel (D) Porcelain

Description : In the Kraft process of sulphate paper pulp manufacture, the black liquor and the white liquor storage tank is made of (A) Concrete (B) Wood (C) Steel (D) Porcelain

Last Answer : (C) Steel

Raschig ring made of porcelain cannot be used for treating concentrated (A) Hydrochloric acid (B) Nitric acid (C) Alkalis (D) Sulphuric acid

Description : Raschig ring made of porcelain cannot be used for treating concentrated (A) Hydrochloric acid (B) Nitric acid (C) Alkalis (D) Sulphuric acid

Last Answer : (C) Alkalis

Water kept in porcelain contains do not become cold due to the

Description : Water kept in porcelain contains do not become cold due to the

Last Answer : absence of holes.

Give reason: Water kept in porcelain container will not get cooled if it is glazed.

Description : Give reason: Water kept in porcelain container will not get cooled if it is glazed.

Last Answer : Glazing plugs the pores present in porcelain articles. If pores are present, water oozes from these pores and gets evaporated. This has a cooling effect on the water inside, As the pores are plugged, water does not get evaporated hence no cooling.

Ceramics are produced from silicates or clayish materials: Which of the following is not a ceramic material? (A) Slag cement (B) Glasses (C) Porcelain/Potteries (D) Teflon

Description : Ceramics are produced from silicates or clayish materials: Which of the following is not a ceramic material? (A) Slag cement (B) Glasses (C) Porcelain/Potteries (D) Teflon

Last Answer : (D) Teflon

Which of the following is not a dielectric material? (A) Cotton, silk and paper (B) Asbestos, glass, porcelain and mica (C) Rubber and polymeric resins (D) All refractory materials

Description : Which of the following is not a dielectric material? (A) Cotton, silk and paper (B) Asbestos, glass, porcelain and mica (C) Rubber and polymeric resins (D) All refractory materials

Last Answer : Option C

The low voltage porcelain is mainly used for (A) Switch block (B) Insulating tubes (C) Lamp sockets (D) All of these

Description : The low voltage porcelain is mainly used for (A) Switch block (B) Insulating tubes (C) Lamp sockets (D) All of these

Last Answer : Answer: Option D

Porcelain is used as: (A) Sanitary wares (B) Electric insulators (C) Storage vessels (D) Reactor chambers

Description : Porcelain is used as: (A) Sanitary wares (B) Electric insulators (C) Storage vessels (D) Reactor chambers

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The low voltage porcelain is prepared by wet process (B) The high voltage porcelain is prepared by dry process (C) The low voltage porcelain is prepared by dry process (D) None of the above

Description : Pick up the correct statement from the following: (A) The low voltage porcelain is prepared by wet process (B) The high voltage porcelain is prepared by dry process (C) The low voltage porcelain is prepared by dry process (D) None of the above

Last Answer : Answer: Option C

Which one of the following is used for preparing porcelain? (A) Clay (B) Feldspar (C) Quartz (D) All of these

Description : Which one of the following is used for preparing porcelain? (A) Clay (B) Feldspar (C) Quartz (D) All of these

Last Answer : Answer: Option D

The arcing contacts in a circuit breaker are made of (a) copper tungsten alloy (b) porcelain (c) electrolytic copper (d) aluminium alloy

Description : The arcing contacts in a circuit breaker are made of (a) copper tungsten alloy (b) porcelain (c) electrolytic copper (d) aluminium alloy

Last Answer : (a) copper tungsten alloy

The clinical advantage of porcelain laminate veneers over composite resin veneers is: A. Color stability and resistance to abrasion B. Availability of self-curing or light activated placement (yes but not necessary a clinical advantage) C. Minimal over-contouring of the treated teeth ( not necessarily true depends on the dentist's abilities) D. May be used in edge to edge occlusion or Class III relationships.

Description : The clinical advantage of porcelain laminate veneers over composite resin veneers is: A. Color stability and resistance to abrasion B. Availability of self-curing or light activated placement (yes but not ... dentist's abilities) D. May be used in edge to edge occlusion or Class III relationships.

Last Answer : A. Color stability and resistance to abrasion

“Pop off” of a porcelain veneer from the under the lying gold crown is due to:** A. Too thick application of pure gold surface conditioner B. Contamination at the porcelain metal interface C. Under firing the opaque layer D. All of the above

Description : “Pop off” of a porcelain veneer from the under the lying gold crown is due to:** A. Too thick application of pure gold surface conditioner B. Contamination at the porcelain metal interface C. Under firing the opaque layer D. All of the above

Last Answer : B. Contamination at the porcelain metal interface

When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Description : When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Last Answer : B. Between preheat and opaque stages

What is the minimal labial reduction for porcelain metal crowns: A. 1mm B. 1.5mm C. 0.5mm

Description : What is the minimal labial reduction for porcelain metal crowns: A. 1mm B. 1.5mm C. 0.5mm

Last Answer : B. 1.5mm

Porcelain must not be contaminated by handling between which two stages: A. Pre-soldering and heat treatment B. Heat treatment and opaque /bake/ stages C. Opaque and bisque stages D. Bisque and glazing stages E. First opaque bake and second opaque bake

Description : Porcelain must not be contaminated by handling between which two stages: A. Pre-soldering and heat treatment B. Heat treatment and opaque /bake/ stages C. Opaque and bisque stages D. Bisque and glazing stages E. First opaque bake and second opaque bake

Last Answer : A. Pre-soldering and heat treatment

The advantage of firing porcelain in vacuum:** A. Reduces size of air-bubbles incorporated thus decreasing porosity B. Removes water before firing, increasing the hardness of porcelain C. Significantly lowers firing temperature

Description : The advantage of firing porcelain in vacuum:** A. Reduces size of air-bubbles incorporated thus decreasing porosity B. Removes water before firing, increasing the hardness of porcelain C. Significantly lowers firing temperature

Last Answer : A. Reduces size of air-bubbles incorporated thus decreasing porosity

A labially displaced anterior tooth is restored with a gold core porcelain jacket crown so that it is in line with the arch; the crown will appears: A. Short B. Long C. Narrow D. Wide

Description : A labially displaced anterior tooth is restored with a gold core porcelain jacket crown so that it is in line with the arch; the crown will appears: A. Short B. Long C. Narrow D. Wide

Last Answer : C. Narrow

The major cause of jacket crown breakage is, A. Inclusion of platinum foil B. Use of weak cementum C. Voids of porcelain D. Porcelain is thinner than 1mm

Description : The major cause of jacket crown breakage is, A. Inclusion of platinum foil B. Use of weak cementum C. Voids of porcelain D. Porcelain is thinner than 1mm

Last Answer : D. Porcelain is thinner than 1mm

The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Description : The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

Last Answer : C. 1.5 mm

The most common cause of porosity in porcelain jacket crowns is, A. Moisture contamination B. Excessive firing temperature C. Failure to anneal the platinum matrix D. Excessive condensation of the porcelain E. Inadequate condensation of the porcelain

Description : The most common cause of porosity in porcelain jacket crowns is, A. Moisture contamination B. Excessive firing temperature C. Failure to anneal the platinum matrix D. Excessive condensation of the porcelain E. Inadequate condensation of the porcelain

Last Answer : E. Inadequate condensation of the porcelain