Ceramics are produced from silicates or clayish materials: Which of the following is not a ceramic material? (A) Slag cement (B) Glasses (C) Porcelain/Potteries (D) Teflon

Ceramics are produced from silicates or clayish materials: Which of
the following is not a ceramic material?
(A) Slag cement
(B) Glasses
(C) Porcelain/Potteries
(D) Teflon
by

1 Answer

Answer :

(D) Teflon
by

Related questions

Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Description : Salt is the basic raw material for the manufacture of (A) Cement (B) Glass (C) Potteries (D) Caustic soda

Last Answer : (D) Caustic soda

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

Which of the following is the most widely used insulating material for steam carrying pipelines? (A) Ceramic fibre blanket (B) Glass wool and 85% magnesia (C) Vermiculite (D) Slag wool

Description : Which of the following is the most widely used insulating material for steam carrying pipelines? (A) Ceramic fibre blanket (B) Glass wool and 85% magnesia (C) Vermiculite (D) Slag wool

Last Answer : (B) Glass wool and 85% magnesia

(3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of aluminium- and ironcontaining clinker phases and other compounds. The ratio of CaO to SiO2 shall not be less than 2.0. The magnesium oxide content (MgO) shall not exceed 5.0% by mass. Cement sets when mixed with water by way of a complex series of chemical reactions still only partly understood.

Description : (3) preventing rapid setting of cement Explanation: Portland cement clinker is a hydraulic material which shall consist of at least two-thirds by mass of calcium silicates, the remainder consisting of ... mixed with water by way of a complex series of chemical reactions still only partly understood.

Last Answer : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

Raw materials used for producing __________ cement does not contain iron oxide. (A) Waterproof (B) Slag (C) White (D) Pozzolan

Description : Raw materials used for producing __________ cement does not contain iron oxide. (A) Waterproof (B) Slag (C) White (D) Pozzolan

Last Answer : (C) White

H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware

Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin

100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain

Last Answer : (C) Aluminium, tin and rubber

Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Description : Pick out the wrong statement. (A) Dry process is used for the manufacture of cement, when the raw material is blast furnace slag (B) Portland cement is made employing wet process (C) Gypsum is added to Portland cement to lengthen its setting time (D) None of these

Last Answer : (D) None of these

Main constituents of Portland cement are calcium aluminate and (A) Gypsum(B) Silicates(C) Sodium silicate(D) Carbonates

Description : Main constituents of Portland cement are calcium aluminate and (A) Gypsum (B) Silicates (C) Sodium silicate (D) Carbonates

Last Answer : (B) Silicates

Which of the following is not a dielectric material? (A) Cotton, silk and paper (B) Asbestos, glass, porcelain and mica (C) Rubber and polymeric resins (D) All refractory materials

Description : Which of the following is not a dielectric material? (A) Cotton, silk and paper (B) Asbestos, glass, porcelain and mica (C) Rubber and polymeric resins (D) All refractory materials

Last Answer : Option C

Ceramic & Porcelain Tile Installation?

Description : Ceramic & Porcelain Tile Installation?

Last Answer : form_title=Ceramic & Porcelain Tile Installation form_header=11793 How would you best describe the kind of project this is?*= () Replace existing tile () Repair existing tile () Replace existing non-tile surface () ... going to be placed?*= [] Floor [] Wall [] Tub/Shower [] Countertop [] Backsplash

Setting of cement is due to the hydration of calcium silicates and?

Description : Setting of cement is due to the hydration of calcium silicates and?

Last Answer : Calcium aluminates

Polytetrafluoroethylene (PTFE) is also widely used insulator and is known as. A. polystyrene B. teflon C. ceramic D. bakelite

Description : Polytetrafluoroethylene (PTFE) is also widely used insulator and is known as. A. polystyrene B. teflon C. ceramic D. bakelite

Last Answer : B. teflon

.The most resistant filling materials to fill class IV cavities are: A. Resins with silicone dioxide (SiO2) B. Resins with glass or quartz C. Silico-phosphate D. Silicates

Description : .The most resistant filling materials to fill class IV cavities are: A. Resins with silicone dioxide (SiO2) B. Resins with glass or quartz C. Silico-phosphate D. Silicates

Last Answer : B. Resins with glass or quartz

Pot furnace which is either regenerative or recuperative, is used in the manufacture of (A) Glass (B) Stainless steel (C) Potteries (D) Refractory bricks

Description : Pot furnace which is either regenerative or recuperative, is used in the manufacture of (A) Glass (B) Stainless steel (C) Potteries (D) Refractory bricks

Last Answer : (A) Glass

What are the raw materials used in the manufacture of ceramics?

Description : What are the raw materials used in the manufacture of ceramics?

Last Answer : Clay like kaolinite and bentonite, Flint, White clay, Quartz and feldspar.

Strong and ductile materials (a) Polymers (b) Ceramics (c) Metals (d) Semiconductors

Description : Strong and ductile materials (a) Polymers (b) Ceramics (c) Metals (d) Semiconductors

Last Answer : (c) Metals

Polymerics and ceramics membrane materials

Description : Polymerics and ceramics membrane materials

Last Answer : Polymerics and ceramics membrane materials:  Polymeric membrane materials. All polymers can be used as barrier or membrane material but the chemical and physical properties differ so much that only ... membranes.  Eg Aluminium oxide / Alumina, Silicon carbide, Titanium dioxide / Titania

You are asked to construct a massive dam, the type of cement you will use, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : You are asked to construct a massive dam, the type of cement you will use, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option C

The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Description : The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as (A) Low-heat Portland cement (B) Rapid hardening Portland cement (C) Portland blast slag cement (D) Portland pozzolana cement

Last Answer : Answer: Option A

For the construction of thin R.C.C. structures, the type of cement to be avoided, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : For the construction of thin R.C.C. structures, the type of cement to be avoided, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option D

For road pavements, the cement generally used, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Description : For road pavements, the cement generally used, is (A) Ordinary Portland cement (B) Rapid hardening cement (C) Low heat cement (D) Blast furnace slag cement

Last Answer : Answer: Option B

Blast furnace slag cement concrete requires ___________time for shuttering and curing. (a) Less (b) More (c) Medium (d) All the above

Description : Blast furnace slag cement concrete requires ___________time for shuttering and curing. (a) Less (b) More (c) Medium (d) All the above

Last Answer : (b) More

For mass concrete work, the type of cement preferable is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Description : For mass concrete work, the type of cement preferable is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Last Answer : [ C ] Low heat cement

For road pavements, the cement generally used, is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Description : For road pavements, the cement generally used, is [ A ] Ordinary Portland cement [ B ] Rapid hardening cement [ C ] Low heat cement [ D ] Blast furnace slag cement

Last Answer : [ A ] Ordinary Portland cement

In Portland Blast furnace slag cement, the blast furnace slag content shall not exceed [ A ] 50% [ B ] 65% [ C ] 80% [ D ] 90%

Description : In Portland Blast furnace slag cement, the blast furnace slag content shall not exceed [ A ] 50% [ B ] 65% [ C ] 80% [ D ] 90%

Last Answer : [ B ] 65%

Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Description : Which cement should not be used for bridge slabs ro RCC frames a) OPC b) Portland Pozzolana cement * c) Portland furnace slag cement d) Rapid hardening cement

Last Answer : b) Portland Pozzolana cement *

Which of the following is not used as a nuclear fuel cladding material? (A) Zircaloy (B) Cadmium (C) Ceramics (D) Stainless steel

Description : Which of the following is not used as a nuclear fuel cladding material? (A) Zircaloy (B) Cadmium (C) Ceramics (D) Stainless steel

Last Answer : (B) Cadmium

Which of the listed groups of electrical insulation materials is best suited for the highest operating temperatures? A. impregnated cotton and silk B. unimpregnated paper and cotton C. pure glass and quartz D. mica and porcelain with bonding agents

Description : Which of the listed groups of electrical insulation materials is best suited for the highest operating temperatures? A. impregnated cotton and silk B. unimpregnated paper and cotton C. pure glass and quartz D. mica and porcelain with bonding agents

Last Answer : Answer: C

Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Description : Which of the following is an undesirable property of slag produced during the Pyrometallurgical method of metal extraction from its ore? (A) High fusibility & fluidity (B) High thermal conductivity (C) Low density (D) High chemical activity

Last Answer : B) High thermal conductivity

Name the clay mineral produced by the alteration of potash feldspar which is also used in ceramics.

Description : Name the clay mineral produced by the alteration of potash feldspar which is also used in ceramics.

Last Answer : ANSWER: KAOLINITE 

Ceramic materials are (A) Organic in nature (B) Stronger in compression than in tension (C) Always amorphous in nature (D) Always bad heat conductors

Description : Ceramic materials are (A) Organic in nature (B) Stronger in compression than in tension (C) Always amorphous in nature (D) Always bad heat conductors

Last Answer : (B) Stronger in compression than in tension

Ceramic materials (A) Are exemplified by clay and mica (B) Are poor electrical conductors due to lack of free electrons (C) Never exhibit polymorphism (D) All (A), (B) and (C)

Description : Ceramic materials (A) Are exemplified by clay and mica (B) Are poor electrical conductors due to lack of free electrons (C) Never exhibit polymorphism (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Ceramic materials fabrication cannot be done by (A) Welding (B) Slip casting (C) Extrusion (D) Plastic pressing

Description : Ceramic materials fabrication cannot be done by (A) Welding (B) Slip casting (C) Extrusion (D) Plastic pressing

Last Answer : (A) Welding

Which of the following ceramic packing materials is the costliest of all? (A) Berl saddles (B) Raschig rings (C) Pall rings (D) Intalox saddles

Description : Which of the following ceramic packing materials is the costliest of all? (A) Berl saddles (B) Raschig rings (C) Pall rings (D) Intalox saddles

Last Answer : Berl saddles

Viscoelastic behaviour is observed in __________ materials. (A) Non-crystalline organic polymeric (B) Ceramic (C) All crystalline (D) All amorphous

Description : Viscoelastic behaviour is observed in __________ materials. (A) Non-crystalline organic polymeric (B) Ceramic (C) All crystalline (D) All amorphous

Last Answer : Non-crystalline organic polymeric

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66

Last Answer : (B) Bakelite

The material added to ceramics to add strength is

Description : The material added to ceramics to add strength is

Last Answer : feldspar.

Mention the advantage of the following raw material in ceramics.

Description : Mention the advantage of the following raw material in ceramics.

Last Answer : Additive No 1 Clay 3 QuartzAdvantage Porous, desired shape, becomes hard on heating Cracking can be controlled as it does not absorb water Cracking can be controlled as it does not absorb water Feldspar Gives smoother, glossy finish. It also adds strength

Which class of material would you classify Nylon a) Fibres b) Polymer c) Ceramics d) Glass

Description : Which class of material would you classify Nylon a) Fibres b) Polymer c) Ceramics d) Glass

Last Answer : b) Polymer

Agglomeration of individual particles into clusters (flocs) is called flocculation. To prevent flocculation, the most commonly used dispersing agents are (A) Carbonates (B) Sulphates (C) Silicates & phosphates (D) Bi-carbonates

Description : Agglomeration of individual particles into clusters (flocs) is called flocculation. To prevent flocculation, the most commonly used dispersing agents are (A) Carbonates (B) Sulphates (C) Silicates & phosphates (D) Bi-carbonates

Last Answer : (C) Silicates & phosphates

Molecular sieves are porous (A) Alumina (B) Silica (C) Synthetic zeolites crystals/metal alumino-silicates (D) None of these

Description : Molecular sieves are porous (A) Alumina (B) Silica (C) Synthetic zeolites crystals/metal alumino-silicates (D) None of these

Last Answer : (C) Synthetic zeolites crystals/metal alumino-silicates

During the extraction of iron, slag produced is

Description : During the extraction of iron, slag produced is

Last Answer : During the extraction of iron, slag produced is A. Zone of heat absorption B. Zone of reduction only ... only D. Zone of reduction and zone of fusion

Which of the following would not be a suitable material of construction for handling aqueous hydrofluoric acid (HF) at 100°C? (A) Monel (B) Stainless steel (C) Graphite (D) Kel-F and Teflon

Description : Which of the following would not be a suitable material of construction for handling aqueous hydrofluoric acid (HF) at 100°C? (A) Monel (B) Stainless steel (C) Graphite (D) Kel-F and Teflon

Last Answer : (B) Stainless steel

Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Description : Specify the material of construction suitable for handling concentrated HNO3 at 100°C. (A) High silicon iron, Kel-F and Teflon (B) Tin and wood (C) Silicone rubber (D) Stainless steel

Last Answer : (A) High silicon iron, Kel-F and Teflon

Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber, Kel-F and Teflon (B) Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Description : Which of the following material of construction may be recommended by a chemical engineer for handling a gaseous chlorine (dry or wet) stream in a fluid flow system? (A) High silicon iron, silicon rubber ... Mild steel and stainless steel (C) Cast iron, tin and aluminium (D) Copper, nickel and Monel

Last Answer : (A) High silicon iron, silicon rubber, Kel-F and Teflon

Why is glazing used to make ceramic materials ?

Description : Why is glazing used to make ceramic materials ?

Last Answer : A mixture of ceramic materials is molded into a specific molding of the crossing and after drying in hot air, it is burned and turned into perforated burnt ceramic material or biscuits. In this ... . into a thin glass material. Glazing closes the pores on the surface of the material biscuits.

Cracking of ceramic articles can be controlled by non-clay materials like

Description : Cracking of ceramic articles can be controlled by non-clay materials like

Last Answer : flint/quartz.

Give reason: Unglazed ceramic materials are used in water filters.

Description : Give reason: Unglazed ceramic materials are used in water filters.

Last Answer : Unglazed ceramic materials use the small pores to filter dirt, debris and bacteria out of water.