The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is, A. 1mm B. The full thickness of enamel C. 1.5 mm D. 2.5mm E. One third of the dentine thickness

The minimal labial tooth reduction for satisfactory aesthetics with porcelain fused to metal crown is,
A. 1mm
B. The full thickness of enamel
C. 1.5 mm
D. 2.5mm
E. One third of the dentine thickness
by

1 Answer

Answer :

C. 1.5 mm
by

Related questions

What is the minimal labial reduction for porcelain metal crowns: A. 1mm B. 1.5mm C. 0.5mm

Description : What is the minimal labial reduction for porcelain metal crowns: A. 1mm B. 1.5mm C. 0.5mm

Last Answer : B. 1.5mm

A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown can BEST be achieved by: A. Hand burnishing B. Mechanical burnishing C. Using finishing burs and points to remove the enamel margins on the tooth D. Making a new impression and remaking the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Description : A crown casting with a chamfer margin fits the die; but in the mouth the casting is open approximately 0.3mm. A satisfactory fit and accurate physiological close of the gingival area of the crown ... the crown E. Relieving the inside of the occlusal surface of the casting to allow for further

Last Answer : D. Making a new impression and remaking the crown

An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Description : An advantage of metal. ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness. B. Overall conservative for tooth structure. C. Ability to watch the appearance of adjacent natural teeth. D. Less laboratory time.

Last Answer : A. Palatal reduction may be of minimal thickness.

An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Description : An advantage of metal-ceramic crowns, compared wit full ceramic crowns for restoring anterior teeth is, A. Palatal reduction may be of minimal thickness B. Overall conservative for tooth structure C. Ability to watch the appearance of adjacent natural teeth D. Less laboratory time

Last Answer : A. Palatal reduction may be of minimal thickness

When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Description : When should metallic framework not be contaminated during the fabrication of a porcelain fused to metal crown: A. Between bisque stage and glazing stage B. Between preheat and opaque stages C. Between opaque and bisque stages D. Between one opaque and two opaque stages

Last Answer : B. Between preheat and opaque stages

The major cause of jacket crown breakage is, A. Inclusion of platinum foil B. Use of weak cementum C. Voids of porcelain D. Porcelain is thinner than 1mm

Description : The major cause of jacket crown breakage is, A. Inclusion of platinum foil B. Use of weak cementum C. Voids of porcelain D. Porcelain is thinner than 1mm

Last Answer : D. Porcelain is thinner than 1mm

Calculus attaches to teeth surfaces by: A. Acquired pellicle B. Interlocking to the crystals of the tooth C. Penetrated into enamel and dentine D. Mechanical interlocking E. All of the above

Description : Calculus attaches to teeth surfaces by: A. Acquired pellicle B. Interlocking to the crystals of the tooth C. Penetrated into enamel and dentine D. Mechanical interlocking E. All of the above

Last Answer : E. All of the above

In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Description : In preparing a very small proximal amalgam cavity on a molar tooth what would consider, A. Extend the cavity to the gingival margin B. Extend the cavity beyond the contacts areas C. Achieve at least 2mm in dentine D. Extend cavity just beyond dento enamel junction

Last Answer : D. Extend cavity just beyond dento enamel junction

The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Description : The surface of enamel rod prisms in permanent teeth is: A. Perpendicular to the outer surface of the tooth B. Parallel to the outer surface of the tooth C. Parallel to enamel contour D. Parallel to enamel-dentine contour

Last Answer : A. Perpendicular to the outer surface of the tooth

In the construction of a full veneer gold crown, future recession of gingival tissue can be prevented or at least minimised by, A. Extension of the crown 1 mm under the gingival crevice B. Reproduction of normal tooth incline in the gingival one third of the crown C. Slight over contouring of the tooth in the gingival one fifth of the crown D. Slight under contouring of the tooth in the gingival one fifth of the crown

Description : In the construction of a full veneer gold crown, future recession of gingival tissue can be prevented or at least minimised by, A. Extension of the crown 1 mm under the gingival crevice B. ... of the crown D. Slight under contouring of the tooth in the gingival one fifth of the crown

Last Answer : B. Reproduction of normal tooth incline in the gingival one third of the crown

A labially displaced anterior tooth is restored with a gold core porcelain jacket crown so that it is in line with the arch; the crown will appears: A. Short B. Long C. Narrow D. Wide

Description : A labially displaced anterior tooth is restored with a gold core porcelain jacket crown so that it is in line with the arch; the crown will appears: A. Short B. Long C. Narrow D. Wide

Last Answer : C. Narrow

Odontogenic cysts develop from the following structures except: A. Reduced enamel epithelium of tooth crown B. Dental lamina dura C. Epithelium trapped after sutures D. ertwig’s root sheath

Description : Odontogenic cysts develop from the following structures except: A. Reduced enamel epithelium of tooth crown B. Dental lamina dura C. Epithelium trapped after sutures D. ertwig’s root sheath

Last Answer : C. Epithelium trapped after sutures

When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Description : When you try to seat a crown on a tooth you find a discrepancy of 0.3mm at the margin; you will: A. Reduce inner surface of crown B. Remake a new crown C. Smooth the enamel at the margin D. Hand burnish crown margins

Last Answer : B. Remake a new crown

The width of the normal periodontal ligament space is: A. 0.25 to 0.5mm B. 1mm

Description : The width of the normal periodontal ligament space is: A. 0.25 to 0.5mm B. 1mm

Last Answer : A. 0.25 to 0.5mm

How much space do you need to cap a weakened cusp with amalgam: A. 1mm B. 1.5mm C. 2mm D. 2.5mm

Description : How much space do you need to cap a weakened cusp with amalgam: A. 1mm B. 1.5mm C. 2mm D. 2.5mm

Last Answer : C. 2mm

The percentage of total dentine surface / dentinal tubules 0.5mm away from pulp is,** A. 20% B. 50%

Description : The percentage of total dentine surface / dentinal tubules 0.5mm away from pulp is,** A. 20% B. 50%

Last Answer : B. 50%

A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the leaves are 100mm and 12mm respectively. If modulus of elasticity is 207000N/mm², calculate the initial nip. (a) 26.8mm (b) 24.9mm (c) 22.5mm (d)23.1mm

Description : A leaf spring consists of 3 extra full length leaves and 14 graduated length leaves. The maximum force that can act on the spring is 70kN and the distance between eyes of the spring is 1.2m. Width and thickness of the ... /mm², calculate the initial nip. (a) 26.8mm (b) 24.9mm (c) 22.5mm (d)23.1mm

Last Answer : b) 24.9mm

“Pop off” of a porcelain veneer from the under the lying gold crown is due to:** A. Too thick application of pure gold surface conditioner B. Contamination at the porcelain metal interface C. Under firing the opaque layer D. All of the above

Description : “Pop off” of a porcelain veneer from the under the lying gold crown is due to:** A. Too thick application of pure gold surface conditioner B. Contamination at the porcelain metal interface C. Under firing the opaque layer D. All of the above

Last Answer : B. Contamination at the porcelain metal interface

for dental caries to progress in dentine, A. the dentine must contain soluble collagen B. enamel must contain glycoproteins C. diet must contain simple carbohydrate D. diet must contain polysaccharides E. pulp must contain complement

Description : for dental caries to progress in dentine, A. the dentine must contain soluble collagen B. enamel must contain glycoproteins C. diet must contain simple carbohydrate D. diet must contain polysaccharides E. pulp must contain complement

Last Answer : C. diet must contain simple carbohydrate

Acid conditioning of enamel and eroded dentine: A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material B. Is a traumatic approach to bonding materials C. Is not a safe and simple method of bonding D. Bonding fails to produce a highly significant retention and good marginal integrity and clinical durability E. None of the above

Description : Acid conditioning of enamel and eroded dentine: A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material B. Is a traumatic approach to bonding ... highly significant retention and good marginal integrity and clinical durability E. None of the above

Last Answer : A. Provides an none traumatic, conservative clinical approach to the bonding of restorative material

For dental caries to progress in dentine, A. The dentine must contain soluble collagen B. Enamel must contain glycoproteins C. Diet must contain simple carbohydrate D. Diet must contain polysaccharides E. Pulp must contain complement

Description : For dental caries to progress in dentine, A. The dentine must contain soluble collagen B. Enamel must contain glycoproteins C. Diet must contain simple carbohydrate D. Diet must contain polysaccharides E. Pulp must contain complement

Last Answer : C. Diet must contain simple carbohydrate

While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Description : While you finish a class I cavity, the enamel is sound but you notice a brown line in the dentine and on the Dento-enamel junction, what is your response, A. You leave it and complete the final restoration B. You extend your preparation and clean it C. You apply a cover of varnish

Last Answer : B. You extend your preparation and clean it

Two conditions of enamel facilitate the post eruptive uptake of fluoride: A. Hyper mineralisation and surface dentine B. Surface demineralisation and hypo mineralisation C. Dental fluorosis and enamel opacities

Description : Two conditions of enamel facilitate the post eruptive uptake of fluoride: A. Hyper mineralisation and surface dentine B. Surface demineralisation and hypo mineralisation C. Dental fluorosis and enamel opacities

Last Answer : B. Surface demineralisation and hypo mineralisation

Which of the following is a radiographic feature of dentino-genesis imperfecta: A. Small pulp chambers and root canals, normal enamel B. Enamel is missing but dentine formation is normal C. Enamel and dentine show disturbances D. Pulp is normal but dentine is abnormal

Description : Which of the following is a radiographic feature of dentino-genesis imperfecta: A. Small pulp chambers and root canals, normal enamel B. Enamel is missing but dentine formation is normal C. Enamel and dentine show disturbances D. Pulp is normal but dentine is abnormal

Last Answer : A. Small pulp chambers and root canals, normal enamel

Which is the only dental tissue that loses its formative cells as it matures: A. Enamel B. Dentine C. Pulp D. Cementum

Description : Which is the only dental tissue that loses its formative cells as it matures: A. Enamel B. Dentine C. Pulp D. Cementum

Last Answer : A. Enamel

Using fluoride in the root surface caries is to protect, A. Enamel B. Dentine and cementum C. Cuticle

Description : Using fluoride in the root surface caries is to protect, A. Enamel B. Dentine and cementum C. Cuticle

Last Answer : B. Dentine and cementum

For lower premolars, the purpose of inclining the handpiece lingually is to, A. Avoid buccal pulp horn B. Avoid lingual pulp horn C. Remove unsupported enamel D. Conserve lingual dentine

Description : For lower premolars, the purpose of inclining the handpiece lingually is to, A. Avoid buccal pulp horn B. Avoid lingual pulp horn C. Remove unsupported enamel D. Conserve lingual dentine

Last Answer : A. Avoid buccal pulp horn

A lateral incisor labial to the arch needs to be restored in normal alignment with PFM retraction. How will the tooth appear: A. Too wide B. Too short C. To narrow D. To long

Description : A lateral incisor labial to the arch needs to be restored in normal alignment with PFM retraction. How will the tooth appear: A. Too wide B. Too short C. To narrow D. To long

Last Answer : C. To narrow

The clinical advantage of porcelain laminate veneers over composite resin veneers is: A. Color stability and resistance to abrasion B. Availability of self-curing or light activated placement (yes but not necessary a clinical advantage) C. Minimal over-contouring of the treated teeth ( not necessarily true depends on the dentist's abilities) D. May be used in edge to edge occlusion or Class III relationships.

Description : The clinical advantage of porcelain laminate veneers over composite resin veneers is: A. Color stability and resistance to abrasion B. Availability of self-curing or light activated placement (yes but not ... dentist's abilities) D. May be used in edge to edge occlusion or Class III relationships.

Last Answer : A. Color stability and resistance to abrasion

Main part of tooth is (a) Enamel (b) Dentine (c) Pulp (d) None

Description : Main part of tooth is (a) Enamel (b) Dentine (c) Pulp (d) None

Last Answer : (b) Dentine

Hardest part of tooth is (a) Dentine (b) Enamel (c) Pulp (d) None

Description : Hardest part of tooth is (a) Dentine (b) Enamel (c) Pulp (d) None

Last Answer : (b) Enamel

In a vital pulp therapy, what is the optimum depth for a pin hole in a tooth: A. 4-5mm B. Approximately 2mm C. Less than 2mm D. 1-1.5mm

Description : In a vital pulp therapy, what is the optimum depth for a pin hole in a tooth: A. 4-5mm B. Approximately 2mm C. Less than 2mm D. 1-1.5mm

Last Answer : A. 4-5mm

Following calcium hydroxide pulpotomy, the dentist would expect dentine bridge to form at, A. The exact level of amputation B. Level somewhere below the amputation C. Half way between amputation and apex D. At the apical region of the tooth

Description : Following calcium hydroxide pulpotomy, the dentist would expect dentine bridge to form at, A. The exact level of amputation B. Level somewhere below the amputation C. Half way between amputation and apex D. At the apical region of the tooth

Last Answer : B. Level somewhere below the amputation

During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Description : During mouth preparation for RPD on tooth adjacent to edentulous area. There is dentine exposure: A. Restoration is required B. Proceed with rest seat preparation and fabrication if involved area is not more than 2mm

Last Answer : A. Restoration is required

Characteristic of mucogingival involvement: a. A pocket of more than 4 mm depth. b. Only 1mm of attached gingiva remains. c. Pocket extends to the mucogingival junction.

Description : Characteristic of mucogingival involvement: a. A pocket of more than 4 mm depth. b. Only 1mm of attached gingiva remains. c. Pocket extends to the mucogingival junction.

Last Answer : c. Pocket extends to the mucogingival junction.

Characteristic of mucogingival involvement: A. A pocket of more than 4 mm depth B. Only 1mm of attached gingiva remains C. Pocket extends to the mucogingival junction

Description : Characteristic of mucogingival involvement: A. A pocket of more than 4 mm depth B. Only 1mm of attached gingiva remains C. Pocket extends to the mucogingival junction

Last Answer : C. Pocket extends to the mucogingival junction

How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Description : How much would you reduce a cusp to be replaced with amalgam onlay: A. 2 mm to achieve a good retention form B. 2mm to achieve a good resistance form C. 1mm

Last Answer : B. 2mm to achieve a good resistance form

The junction between primary and secondary dentine is,*** A. A reversal line B. Sharp curvature C. A resting line D. A reduction in the number of tubules

Description : The junction between primary and secondary dentine is,*** A. A reversal line B. Sharp curvature C. A resting line D. A reduction in the number of tubules

Last Answer : B. Sharp curvature

Which of the following anomalies occurs during the initiation and proliferation stages of tooth development A. Amelogenesis imperfecta (developmental defect) B. Dentinogenesis imperfecta (developmental defect) C. Enamel hypoplasia (AI type) D. Oligodontia E. Ankylosis

Description : Which of the following anomalies occurs during the initiation and proliferation stages of tooth development A. Amelogenesis imperfecta (developmental defect) B. Dentinogenesis imperfecta (developmental defect) C. Enamel hypoplasia (AI type) D. Oligodontia E. Ankylosis

Last Answer : D. Oligodontia

The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Description : The cervical finish line of a full veneer crown preparation should be placed: A. Just supragingival whenever is possible B. According to the depth of gingival crevice C. Subgingival to reduce ability of recurrent caries D. At the junction of tooth and amalgam core

Last Answer : A. Just supragingival whenever is possible

The effectiveness of the acid etch is dependent on which of the following factors: A. Material must be used to clean the surface of the tooth prior to etching B. The effectiveness of the itchant C. The chemical and physical nature of the tooth D. The area and surface of the enamel to be itched

Description : The effectiveness of the acid etch is dependent on which of the following factors: A. Material must be used to clean the surface of the tooth prior to etching B. The effectiveness of the itchant C. The chemical and physical nature of the tooth D. The area and surface of the enamel to be itched

Last Answer : C. The chemical and physical nature of the tooth

When the enamel of the tooth is exposed to preparation containing high concentrations of fluoride the major reaction is: M07 A. Sodium fluoride B. Calcium fluoride C. Stannous fluoride D. Fluoroapatite

Description : When the enamel of the tooth is exposed to preparation containing high concentrations of fluoride the major reaction is: M07 A. Sodium fluoride B. Calcium fluoride C. Stannous fluoride D. Fluoroapatite

Last Answer : D. Fluoroapatite

Of all the factors that increase the resistance of teeth to dental caries, THE MOST EFFECTIVE is,** A. The general nutrition of a child during the period of tooth formation B. The intake of fluoride during the period of enamel mineralization and maturation C. Periodic topical fluoride application by dental health care following tooth eruption D. Sufficient intake of calcium and Vitamin D during the period of enamel mineralization and maturation

Description : Of all the factors that increase the resistance of teeth to dental caries, THE MOST EFFECTIVE is,** A. The general nutrition of a child during the period of tooth formation B. The ... eruption D. Sufficient intake of calcium and Vitamin D during the period of enamel mineralization and maturation

Last Answer : B. The intake of fluoride during the period of enamel mineralization and maturation

What does enamel cover? (1) Crown of the tooth (2) Dentin on all sides (3) Cementum (4) Cementum and partly dentin

Description : What does enamel cover? (1) Crown of the tooth (2) Dentin on all sides (3) Cementum (4) Cementum and partly dentin

Last Answer : (1) Crown of the tooth Explanation: The basic unit of enamel is called an enamel rod which is a tightly packed mass of hydroxyapatite crystals in an organized pattern. In cross section, it is best compared ... the crown of the tooth, and the bottom, or tail, oriented toward the root of the tooth.

What does enamel cover ? (1) Crown of the tooth (2) Dentin on all sides (3) Cementum (4) Cementum and partly dentin

Description : What does enamel cover ? (1) Crown of the tooth (2) Dentin on all sides (3) Cementum (4) Cementum and partly dentin

Last Answer : Crown of the tooth

The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Description : The ideal length of core in the fabrication of crown and core of endodontically treated tooth is, A. 1.5 of crown length B. The length of the crown C. 2/3 tooth/root length D. ½ root length

Last Answer : C. 2/3 tooth/root length

What is the ideal length for a post in post-core in an endodontically treated tooth: A. 2/3 of the tooth length B. ½ of the tooth length C. 1.5 times that of the crown D. Same as the anticipated crown

Description : What is the ideal length for a post in post-core in an endodontically treated tooth: A. 2/3 of the tooth length B. ½ of the tooth length C. 1.5 times that of the crown D. Same as the anticipated crown

Last Answer : A. 2/3 of the tooth length

A patient has improperly formed DEJ, reduction in size of pulp chamber, chipping and attrition of enamel that would MOSTLY be: A. Fluorosis B. Amelogenesis imperfecta C. Dentinogenesis imperfecta

Description : A patient has improperly formed DEJ, reduction in size of pulp chamber, chipping and attrition of enamel that would MOSTLY be: A. Fluorosis B. Amelogenesis imperfecta C. Dentinogenesis imperfecta

Last Answer : C. Dentinogenesis imperfecta