What does FF mean ?

What does FF mean ?
by

1 Answer

Answer :

FF stands for Freedom Fighter.
by

Related questions

What is the 'Recently Taged' in FF mean? What do you use it for?

Description : What is the 'Recently Taged' in FF mean? What do you use it for?

Last Answer : You’re it?

IE and FF work ONLY with proxy settings, but then Chrome will only work without... Why?

Description : IE and FF work ONLY with proxy settings, but then Chrome will only work without... Why?

Last Answer : answer:On Windows, Google Chrome uses the same proxy settings as Internet Explorer so it doesn't make sense that one works and the other doesn't work. Firefox, on the other hand, uses it's own proxy ... mean by that? It sounds like you a suggesting you malware of some kind with might be your answer.

Shouldn't pgns show up the same in both safari and ff?

Description : Shouldn't pgns show up the same in both safari and ff?

Last Answer : answer:Could be a color profile issue. Gecko uses a different color profile than Webkit. If you post a link I will take a look. That isn’t spam.

Ratio of FF users from mac to pc?

Description : Ratio of FF users from mac to pc?

Last Answer : PC with firefox here but I use a Mac with firefox at home.

If the roots ff the equation (c2 – ab)x2 – 2(a2 – bc)x + b2 – ac = 0 are equal, then prove that either a = 0 or a3 + b3 + c3 = 3abc -Maths 10th

Description : If the roots ff the equation (c2 – ab)x2 – 2(a2 – bc)x + b2 – ac = 0 are equal, then prove that either a = 0 or a3 + b3 + c3 = 3abc -Maths 10th

Last Answer : (c2 – ab) x2 + 2(bc - a2 ) x+ (b2 – ac) = 0 Comparing with Ax2 + Bx + C = 0 A = (c2 – ab), B = 2(bc - a2 ) and C = b2 – ac According to the question, B2 - 4AC = 0 Put the values in the above equation we get 4a(a3 + b3 + c3 -3abc) = 0 hence, a = 0 or a3 + b3 + c3 = 3ab

What is FF - FF?

Description : What is FF - FF?

Last Answer : That's called the "MAC address" or "Hardware address". It's aunique set of numbers assigned to a network device. Anything thataccess the internet whether phones, wireless cards, computers ... . All devices on the physical segment will see and respondto a message with that destination.

What is Difference Between FF & RF Flanges?

Description : What is Difference Between FF & RF Flanges?

Last Answer : Flanges are an integral part of the Piping industry. These Flanges are used to form a link between two different Pipes. Flat (FF), elevated (RF), ring joint (RTJ), lap joint (M&F), tongue ... Various types of flange faces are used to seat the sealing gasket content as the contact surfaces. The faces

If a frequency of 2.5 kHz were measured at the output of 'FF-C' in the circuit shown in the illustration, what would be the clock frequency? EL-0087 A. 0.8 kHz B. 2.5 kHz C. 7.5 kHz D. 20 kHz

Description : If a frequency of 2.5 kHz were measured at the output of 'FF-C' in the circuit shown in the illustration, what would be the clock frequency? EL-0087 A. 0.8 kHz B. 2.5 kHz C. 7.5 kHz D. 20 kHz

Last Answer : Answer: D

If a frequency of 16.8 kHz were measured at the output of 'FF-C' of the circuit shown in the illustration, the clock frequency would be _____________. EL-0087 A. 8.4 kHz B. 50.4 kHz C. 134.4 kHz D. 1680.0 kHz

Description : If a frequency of 16.8 kHz were measured at the output of 'FF-C' of the circuit shown in the illustration, the clock frequency would be _____________. EL-0087 A. 8.4 kHz B. 50.4 kHz C. 134.4 kHz D. 1680.0 kHz

Last Answer : Answer: C

If the outputs marked 'Q' of 'FF-A', 'FF-B' and 'FF-C' in the circuit shown in the illustration are at logic levels 0, 1, and 1 respectively, what levels are present at the 'NOT Q' outputs? EL-0087 A. 1, 0, and 1 B. 1, 0, and 0 C. 0, 0, and 1 D. 0, 1, and 1

Description : If the outputs marked 'Q' of 'FF-A', 'FF-B' and 'FF-C' in the circuit shown in the illustration are at logic levels 0, 1, and 1 respectively, what levels are present at the 'NOT Q' outputs? EL-0087 A. 1, 0, and 1 B. 1, 0, and 0 C. 0, 0, and 1 D. 0, 1, and 1

Last Answer : Answer: B

If the clock frequency to the circuit shown in the illustration were 100 kHz, what would be indicated at the output of 'FF-C'? EL-0087 A. 10.1 kHz B. 12.5 kHz C. 805 kHz D. 1010 kHz

Description : If the clock frequency to the circuit shown in the illustration were 100 kHz, what would be indicated at the output of 'FF-C'? EL-0087 A. 10.1 kHz B. 12.5 kHz C. 805 kHz D. 1010 kHz

Last Answer : Answer: B

If the clock frequency to the circuit shown in the illustration were 2 kHz, what would be indicated at the output of 'FF-C'? EL-0087 A. 250 Hz B. 666 Hz C. 6 kHz D. 16 kHz

Description : If the clock frequency to the circuit shown in the illustration were 2 kHz, what would be indicated at the output of 'FF-C'? EL-0087 A. 250 Hz B. 666 Hz C. 6 kHz D. 16 kHz

Last Answer : Answer: A

A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Description : A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Last Answer : A. 0.704 fF

A first order gaseous phase reaction is catalysed by a non-porous solid. The kinetic rate constant and the external mass transfer co-efficients are k and kg respectively. The effective rate constant (ke ff) is given by (A) ke ff = k + kg (B) ke ff = (k+ kg )/2 (C) ke ff = (kkg ) 1/2 (D) 1/ke ff = 1/k + 1/kg

Description : A first order gaseous phase reaction is catalysed by a non-porous solid. The kinetic rate constant and the external mass transfer co-efficients are k and kg respectively. The effective rate constant (ke ff) is given by (A) ke ff = k + kg ( ... + kg )/2 (C) ke ff = (kkg ) 1/2 (D) 1/ke ff = 1/k + 1/kg

Last Answer : (D) 1/ke ff = 1/k + 1/kg

Which one is faster between NAND-SR FF and NOR-SR FF?

Description : Which one is faster between NAND-SR FF and NOR-SR FF?

Last Answer : Ans-well both deals with same principle.but i think NAND-SR FF is faster than NOR-SR FF

If having tried all normal methods, the ears cannot be cleared in flight, the ff. action should be taken

Description : If having tried all normal methods, the ears cannot be cleared in flight, the ff. action should be taken

Last Answer : seek medical advice as soon as possible

How is the J-K FF affected if PS and CLR are both LOW?

Description : How is the J-K FF affected if PS and CLR are both LOW?

Last Answer : The flip-flop is jammed.

What two inputs to a J-K FF will override the other inputs?

Description : What two inputs to a J-K FF will override the other inputs?

Last Answer : Clear (CLR) and preset (PS or PR).

What logic levels must exist for the FF to be toggled by the clock?

Description : What logic levels must exist for the FF to be toggled by the clock?

Last Answer : Both J and K must be HIGH.

Assume that K goes HIGH and J goes LOW; when will the FF reset?

Description : Assume that K goes HIGH and J goes LOW; when will the FF reset?

Last Answer : When the clock pulse goes LOW.

. What type of FF can be used as an R-S, a T, or a D FF?

Description : . What type of FF can be used as an R-S, a T, or a D FF?

Last Answer : J-K flip-flop.

What condition must occur to have a change in the output of a D FF?

Description : What condition must occur to have a change in the output of a D FF?

Last Answer : A positive-going clock pulse.

How long is data delayed by a D FF?

Description : How long is data delayed by a D FF?

Last Answer : Up to one clock pulse.

What are the inputs to a D FF?

Description : What are the inputs to a D FF?

Last Answer : Clock and data

How many inputs does a T FF have?

Description : How many inputs does a T FF have?

Last Answer : One.

For an R-S FF to change output conditions, the inputs must be in what states?

Description : For an R-S FF to change output conditions, the inputs must be in what states?

Last Answer : 1 and 0, or opposite states.

The decimal equivalent of hexadecimal FF is ________. 117) A) 25010 B) 24010 C) 25510 D) 22510

Description : The decimal equivalent of hexadecimal FF is ________. 117) A) 25010 B) 24010 C) 25510 D) 22510

Last Answer : C) 25510

Explain the flip-flop excitation tables for RS FF.

Description : Explain the flip-flop excitation tables for RS FF.

Last Answer : • RS flip-flop • In RS flip-flop there are four possible transitions from the present state to the next state. They are, • 0 0 transition: This can happen either when R=S=0 or when R=1 and S=0. • 0 1 transition: This can happen only when S=1 and R=0. • 1 0 transition: This

A switch tail ring counter is made by using a single D-FF. The resulting circuit is

Description : A switch tail ring counter is made by using a single D-FF. The resulting circuit is (A) T-FF (B) D-FF (C) SR-FF (D) JK-FF

Last Answer : A switch tail ring counter is made by using a single D-FF. The resulting circuit is T-FF