What is the voltage of X-ray tube ?

Question

What is the voltage of X-ray tube ?

asked Jan 27, 2022 by anonymous

1 Answer

Answer :

The voltage of X-ray tube is around 100 thousand.

answered Jan 27, 2022 by anonymous

Related questions

In the X-ray radiography technique, the tube voltage for thicker plates as compared to thin plates, should be (A) Higher, as it gives higher wavelength (B) Lower, as it gives higher wavelength (C) Higher, as it gives shorter wavelength (D) Lower, as it gives shorter wavelength

Description : In the X-ray radiography technique, the tube voltage for thicker plates as compared to thin plates, should be (A) Higher, as it gives higher wavelength (B) Lower, as it gives higher wavelength (C) Higher, as it gives shorter wavelength (D) Lower, as it gives shorter wavelength

Last Answer : (C) Higher, as it gives shorter wavelength

What type of X-ray tube ?

Description : What type of X-ray tube ?

Last Answer : X ray tube air zero glass tube.

How many electric gates are there in X-ray tube ?

Description : How many electric gates are there in X-ray tube ?

Last Answer : X-ray tube has 2 electric gates.

The x-raybeam emerging iiom anX-ray tube

Description : The x-raybeam emerging iiom anX-ray tube

Last Answer : The x-raybeam emerging iiom anX-ray tube A. is monochmmatic. B. contains all wavelengths ... lying between a minimum and a maximum wavelength.

The X –ray beam coming from an X-ray tube will be (a) Monochromatic (b) Having all wavelengths larger than a certain minimum wavelength (c) Having all wavelengths smaller than a certain maximum wavelength (d) Having all wavelengths between a minimum and a maximum wavelength

Description : The X –ray beam coming from an X-ray tube will be (a) Monochromatic (b) Having all wavelengths larger than a certain minimum wavelength (c) Having all wavelengths smaller than a certain maximum wavelength (d) Having all wavelengths between a minimum and a maximum wavelength

Last Answer : Ans:(b)

Which of the following methods is the best method for determining nasogastric tube placement in the stomach? a) X-ray Radiologic identification of tube placement in the stomach is most reliable. b) Observation of gastric aspirate Gastric fluid may be grassy green, brown, clear, or odorless while an aspirate from the lungs may be off-white or tan. Hence, checking aspirate is not the best method of determining nasogastric tube placement in the stomach.

Description : Which of the following methods is the best method for determining nasogastric tube placement in the stomach? a) X-ray Radiologic identification of tube placement in the stomach is most reliable. ... for air bubbles is not a reliable method for determining nasogastric tube placement in the stomach.

Last Answer : a) X-ray Radiologic identification of tube placement in the stomach is most reliable.

Half life is a term used to describe a) The penetrating ability a gamma source b) Half the total time a gamma source will be useful c) The time taken for the gamma source to reduce the strength by half d) The rate of decay of an X-ray tube

Description : Half life is a term used to describe a) The penetrating ability a gamma source b) Half the total time a gamma source will be useful c) The time taken for the gamma source to reduce the strength by half d) The rate of decay of an X-ray tube

Last Answer : c) The time taken for the gamma source to reduce the strength by half

A patient with impacted canine; by moving the X ray tube distally the canine moves distally too; where do you expect the impacted canine: A. Labially impacted B. Palatally impacted Eighty-five per cent of impacted maxillary permanent cuspids are palatal impactions, and 15% are labial impactions.

Description : A patient with impacted canine; by moving the X ray tube distally the canine moves distally too; where do you expect the impacted canine: A. Labially impacted B. Palatally impacted ... -five per cent of impacted maxillary permanent cuspids are palatal impactions, and 15% are labial impactions.

Last Answer : B. Palatally impacted Eighty-five per cent of impacted maxillary permanent cuspids are palatal impactions, and 15% are labial impactions.

Explain construction and working of Coolidge tube for production of X-ray.

Description : Explain construction and working of Coolidge tube for production of X-ray.

Last Answer : Construction:- It consist of hard glass bulb with cathode and anode as shown in fig. Cathode is a metal filament kept at negative potential to the filament. Target T consist of copper ... the filament current, the thermionic emission of electron hence intensity of X- rays can be controlled.

In a cathode ray tube, electric and magnesity of the magnetic fields are simultaneously applied at right angles to each other and the intensity of the

Description : In a cathode ray tube, electric and magnesity of the magnetic fields are simultaneously applied at right angles to each other and the intensity of the

Last Answer : In a cathode ray tube, electric and magnesity of the magnetic fields are simultaneously applied at right angles to each ... 01 T` and `E=50,000 V//m`.

What happens when cathode rays strike the glass walls of the cathode ray tube?

Description : What happens when cathode rays strike the glass walls of the cathode ray tube?

Last Answer : Feel Free to Answer

The first practical form of Random Access Memory was the __________ a) SSEM b) Cathode Ray Tube c) William’s Tube d) Thomas’s Tube

Description : The first practical form of Random Access Memory was the __________ a) SSEM b) Cathode Ray Tube c) William’s Tube d) Thomas’s Tube

Last Answer : Answer: c Explanation: The first practical form of RAM was the William’s Tube made in 1947. It stored data as electrically charged spots on the face of a Cathode Ray Tube

From which the cathode ray particles originate in a discharge tube?

Description : From which the cathode ray particles originate in a discharge tube?

Last Answer : Cathode

CRT stands for: a) Ctrl, Refresh, Tab b) Cathode Ray Tube c) Catholic Ray Tuber d) None of These

Description : CRT stands for: a) Ctrl, Refresh, Tab b) Cathode Ray Tube c) Catholic Ray Tuber d) None of These

Last Answer : b) Cathode Ray Tube

CRT stands for: a) Compact Ray Tube b) Cathode Ray Tube c) Compatible Recognition Tool d) None of These

Description : CRT stands for: a) Compact Ray Tube b) Cathode Ray Tube c) Compatible Recognition Tool d) None of These

Last Answer : b) Cathode Ray Tube

Which of the following monitor types most closely resembles a television: a) flat panel b) cathode ray tube c) e - book reader d) data projector e) None of The Above

Description : Which of the following monitor types most closely resembles a television: a) flat panel b) cathode ray tube c) e - book reader d) data projector e) None of The Above

Last Answer : b) cathode ray tube

From which the cathode ray particles originate in a discharge tube

Description : From which the cathode ray particles originate in a discharge tube

Last Answer : Cathode

CRT stands for: a. Cathode ray tube b. Compared ray tube c. Command ray tube d. None of these

Description : CRT stands for: a. Cathode ray tube b. Compared ray tube c. Command ray tube d. None of these

Last Answer : a. Cathode ray tube

.What is The Full form of CART A)Computer Analysis and Response Team B) Cathode Analog Ray Tube C)Computer Accessories Repairing team D)None

Description : .What is The Full form of CART A)Computer Analysis and Response Team B) Cathode Analog Ray Tube C)Computer Accessories Repairing team D)None

Last Answer : A)Computer Analysis and Response Team

What is The Full form of CART A)Computer Analysis and Response Team B) Cathode Analog Ray Tube C)Computer Accessories Repairing team D)None

Description : What is The Full form of CART A)Computer Analysis and Response Team B) Cathode Analog Ray Tube C)Computer Accessories Repairing team D)None

Last Answer : A)Computer Analysis and Response Team

What is The Full form of CART A)Computer Analysis and Response Team B) Cathode Analog Ray Tube C)Computer Accessories Repairing team D)None

Description : What is The Full form of CART A)Computer Analysis and Response Team B) Cathode Analog Ray Tube C)Computer Accessories Repairing team D)None

Last Answer : A)Computer Analysis and Response Team

What is Cathode ray tube ?

Description : What is Cathode ray tube ?

Last Answer : Cathode ray tube (CRT) is a vacuum tube using cathode rays to generate a picture on a fluorescent screen. These cathode rays are in fact the electron beam deflected and modulated, which impinges on a ... tube used to display data in a visual form. Picture tube of a television or computer terminal.

A high voltage applied to a gas discharge tube containing neon gas at very low pressure causes a current to flow through the tube. Which one of the following are the particles that flow towards the cathode? Are they w) electrons x) protons y) negatively charged neon ions z) positively charged neon ions

Description : A high voltage applied to a gas discharge tube containing neon gas at very low pressure causes a current to flow through the tube. Which one of the following are the particles that flow towards the ... Are they w) electrons x) protons y) negatively charged neon ions z) positively charged neon ions

Last Answer : ANSWER: Z -- POSITIVELY CHARGED NEON IONS

Cathode rays in a discharge tube are made up of electrons emitted from the plate that is connected to the negative terminal of the DC voltage source.

Description : Cathode rays in a discharge tube are made up of electrons emitted from the plate that is connected to the negative terminal of the DC voltage source.

Last Answer : Cathode rays in a discharge tube are made up of electrons emitted from the plate that is connected to the negative terminal of the DC voltage source.

After turning on the fluorescent lamp shown in the illustration, you note that the ends of the tube alternately glow and becomce dark without illuminating the center. The most obable cause for this is that ____________. EL-0081 A. component 'D' is loose and due to the ship's vibrations makes and breaks contact B. the power system's voltage is fluctuating in and out of the range necessary for proper operation C. component 'A' is shorted and therefore unable to produce the high voltage required to start the lamp D. component 'B' contacts are opening and closing thus prohibiting sufficient current flow

Description : After turning on the fluorescent lamp shown in the illustration, you note that the ends of the tube alternately glow and becomce dark without illuminating the center. The most obable cause for ... the lamp D. component 'B' contacts are opening and closing thus prohibiting sufficient current flow

Last Answer : Answer: C

The illustration shows a fluorescent light fixture. The ends of the lamp alternately glow and become dark, but the tube will not light. The most probable cause is that ____________. EL-0081 A. component 'D' is loose and due to the ship's vibrations makes and breaks contact B. the power system's voltage is fluctuating in and out of the range necessary for proper operation C. component 'A' is shorted and therefore unable to produce the high voltage required to start the lamp D. component 'B' contacts are opening and closing thus prohibiting sufficient current flow

Description : The illustration shows a fluorescent light fixture. The ends of the lamp alternately glow and become dark, but the tube will not light. The most probable cause is that ____________. EL-0081 ... start the lamp D. component 'B' contacts are opening and closing thus prohibiting sufficient current flow

Last Answer : Answer: C

What is indicated by gradual blackening at the ends of component 'C' shown in the illustration? EL-0081 A. The unit is in danger of exploding. B. The tube is nearing the end of its useful life. C. The circuit voltage is too high. D. The circuit current is too high.

Description : What is indicated by gradual blackening at the ends of component 'C' shown in the illustration? EL-0081 A. The unit is in danger of exploding. B. The tube is nearing the end of its useful life. C. The circuit voltage is too high. D. The circuit current is too high.

Last Answer : Answer: B

During start-up of the circuit shown in the illustration, it is noted that the ends of component 'C' alternately glow and become dark without the tube illuminating. The most probable cause for this is that ____________. EL-0081 A. component 'D' is loose and due to the ship's vibrations makes and breaks contact B. the power system's voltage is fluctuating in and out of the range necessary for proper operation C. component 'A' is shorted and therefore unable to produce the high voltage required to start the lamp D. component 'B' contacts are opening and closing thus prohibiting sufficient current flow

Description : During start-up of the circuit shown in the illustration, it is noted that the ends of component 'C' alternately glow and become dark without the tube illuminating. The most probable cause ... start the lamp D. component 'B' contacts are opening and closing thus prohibiting sufficient current flow

Last Answer : Answer: C

A large negative voltage is applied to the plate of a diode, and a largewhat tube parameter has been exceeded?

Description : A large negative voltage is applied to the plate of a diode, and a largewhat tube parameter has been exceeded?

Last Answer : Peak Inverse Voltage (PIV).

A tube has a transconductance of 800 mhos and a load resistor of 50 kohms. When control grid voltage varies by 6 volts, the plate voltage will vary by what amount?

Description : A tube has a transconductance of 800 mhos and a load resistor of 50 kohms. When control grid voltage varies by 6 volts, the plate voltage will vary by what amount?

Last Answer : 240 volts.

If the mu of a tube is 85 and the signal at the control grid is 4 volts ac, the plate voltage will vary by what amount?

Description : If the mu of a tube is 85 and the signal at the control grid is 4 volts ac, the plate voltage will vary by what amount?

Last Answer : 340 volts.

The plate voltage of a tube will vary 126 volts when a 3-volt ac signal is applied to the control grid. What is the gain of this tube?

Description : The plate voltage of a tube will vary 126 volts when a 3-volt ac signal is applied to the control grid. What is the gain of this tube?

Last Answer : 42.

An ac voltage is applied across a diode. The tube will conduct when

Description : An ac voltage is applied across a diode. The tube will conduct when

Last Answer : Positive.

What circuit in the TV receiver is used to develop the high voltage needed to operate the picture tube?

Description : What circuit in the TV receiver is used to develop the high voltage needed to operate the picture tube?

Last Answer : Horizontal output

Voltage required to operate a neon-sign tube depends upon

Description : Voltage required to operate a neon-sign tube depends upon

Last Answer : Voltage required to operate a neon-sign tube depends upon length of the tube

What is the voltage of X-ray tube ?

Please log in or register to add a comment.

Please log in or register to answer this question.

1 Answer

Answer :

Please log in or register to add a comment.

Related questions