What is the filament of a diode called ?

1 Answer

Answer :

The two electrodes in a diode valve emit an electron , called a cathode or filament.

Related questions

Description : After long periods of use, a grey spot develops on the inside of a bulb. This is because – (1) the tungsten filament evaporates and collects there (2) the heat of the bulb scorches the glass at the top (3) dust inside the bulb condenses on the top (4) glass undergoes a change due to the heat

Last Answer : (3) dust inside the bulb condenses on the top Explanation: At high operating temperatures, tungsten evaporates from the filament and gradually forms a gray film on the inside of the bulb. The inert ... spot develops in the filament. When this happens, the filament will break and the bulb fails.

Description : In a filament type light bulb most of the electric power consumed appears as – (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light

Last Answer : (2) infra-red rays Explanation: When electricity is passed through the filament, the filament gets hot. Depending on the temperature of the filament, radiation is emitted from the filament. The ... energy converts into visible light and rest of it is emitted as heat or infrared radiation.

Description : Full form of CFL used in place of electric bulbs is – (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Last Answer : (1) compact fluorescent lamp Explanation: A compact fluorescent lamp (CFL) is a fluorescent lamp designed to replace an incandescent lamp; some types fit into light fixtures formerly used for incandescent lamps.

Description : The filament of electric bulb is made of (1) Iron (2) Nichrome (3) Tungsten (4) Graphite

Last Answer : (3) Tungsten Explanation: The filament is the part of the light bulb that produces light. Filaments in incandescent light bulbs are made of tungsten.

Description : Tungsten is used for the manufacture of the filament of an electric bulb, because – (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Last Answer : (4) It has a very high melting point Explanation: Tungsten is used because it has the highest melting point of all the metallic elements. It melts at 3410 degrees Celsius. When current passes ... bulb. The first successful light bulb filaments were made of carbon (from carbonized paper or bamboo).

Description : The earth-wire of a cable is connected to – (1) the outer metallic body of the appliance (2) the fuse of the appliance (3) the filament of the appliance (4) short circuitry of the appliance

Last Answer : (2) the fuse of the appliance Explanation: Earth wire prevents Electric shocks. It is connected to the electrical cable of an appliance to prevent electric shocks. Actually it has very low resistance and allows current to pass through it easily.

Description : The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Last Answer : (4) Tungsten Explanation: An incandescent light bulb, incandescent lamp or incandescent light globe is an electric light which produces light with a filament wire heated to a high temperature by an electric ... through it, until it glows. Tungsten, also known as wolfram, is a chemical element.

Description : Is the filament resistance lower or higher in a 500 watt light bulb than in a 100 watt light? Assume that both bulbs have been designed to operate at 110 volts. 

Last Answer : ANSWER: LOWER

Description : In a filament type light bulb most of the electric power consumed appears as (1) visible light (2) infra-red rays (3) ultra-violet rays (4) fluorescent light

Last Answer : infra-red rays

Description : Full form of CFL used in place of electric bulbs is (1) compact fluorescent lamp (2) constantan filament lamp (3) closed filament lamp (4) closed fluorescent lamp

Last Answer : compact fluorescent lamp

Description : The earth-wire of a cable is connected to (1) the outer metallic body of the appliance (2) the fuse of the appliance (3) the filament of the appliance (4) short circuitry of the appliance

Last Answer : the fuse of the appliance

Description : After long periods of use, a grey spot develops on the inside of a bulb. This is because (1) the tungsten filament evaporates and collects there (2) the heat of the bulb scorches the glass at the top (3) dust inside the bulb condenses on the top (4) glass undergoes a change due to the heat

Last Answer : dust inside the bulb condenses on the top

Description : The filament of electric bulb is made up of : (1) Copper (2) Nichrome (3) Lead (4) Tungsten

Last Answer : Tungsten

Description : Tungsten is used for the manufacture of the filament of an electric bulb, because (1) It is a good conductor (2) It is economical (3) It is malleable (4) It has a very high melting point

Last Answer : It has a very high melting point

Description : A semiconductor device made up of a single p-n Junction is called a: w) transistor x) diode y) Fet z) integrated circuit

Last Answer : ANSWER: X -- DIODE

Description : Individual filament of fungus is called as a. Mycelium b. Hypha c. Flagella d. None of these

Last Answer : b. Hypha

Description : Which one among the following components can not be developed within an "integrated circuit"? (1) Diode (2) Triode (3) Transformer (4) Transistor

Last Answer : (3) Transformer Explanation: Some components like transformers and inductors cannot be integrated into an IC except for very specialized high frequency applications. They have to be ... circuit boards as separate components and cannot be integrated into semiconductor based integrated circuits.

Description : The following is an amplifying device : (1) a transformer (2) a transistor (3) a diode (4) a resistor

Last Answer : (2) a transistor Explanation: A transistor is a semiconductor device used to amplify or switch electronic signals and electrical power.

Description : Which one among the following components is used as an amplifying device? (1) Transformer (2) Diode (3) Capacitor (4) Transistor

Last Answer : (4) Transistor Explanation: An amplifier is an electronic device that increases the voltage, current, or power of a signal. Generally transistors are active devices that can be used with discrete components to amplify voltage, power or both depending upon the configuration.

Description : A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Last Answer : (4) a single transistor Explanation: In digital logic, an inverter or NOT gate is a logic gate which implements logical negation. An inverter circuit outputs a voltage representing the opposite ... be constructed using a single NMOS transistor or a single PMOS transistor coupled with a resistor.

Description : The waveform of a certain signal can be studied by – (1) Spectrometer (2) Cathode ray oscilloscope (3) p - n junction diode (4) Sonometer

Last Answer : (4) Sonometer Explanation: A spectrometer is an instrument used to measure properties of light over a specific portion of the electromagnetic spectrum. Cathode ray oscilloscope is an electronic display ... electron beam that is used to produce visible patterns or graphs on a phosphorescent screen.

Description : Which of the following circuit elements is used to 'block' DC in an electronic circuit? (1) Resistances (2) Capacitance (3) Inductance (4) Diode

Last Answer : (2) Capacitance Explanation: A capacitor (originally known as condenser) is a passive two-terminal electrical component used to store energy in an electric field. Capacitors are widely used ... electric power transmission systems for stabilizing voltage and power flow, and for many other purposes.

Description : The device which transfer the signal from low resistance region to high resistance region is – (1) diode (2) transistor (3) capacitor (4) inductor

Last Answer : (2) transistor Explanation: A transistor transfers a signal from a low resistance to high resistance. It has two PN-junctions: one junction is forward biased and other junction is reverse biased ... is introduced in the low resistance, circuit and output is taken from the high resistance circuit.

Description : For which Diode is used? (1) modulation (2) oscillation (3) amplification (4) purificationin

Last Answer : (4) purificationin Explanation: The most common function of a diode is to allow an electric current to pass in one direction (called the diode's forward direction), while blocking current in the ... ) resistance to current flow in one direction, and high (ideally infinite) resistance in the other.

Description : Which of the following is used for regulated electric supply? (1) Zener diode (2) Junction diode (3) Gun diode (4) Tunnel diode

Last Answer : (1) Zener diode Explanation: The Zener diode is like a generalpurpose signal diode. When based in the forward direction it behaves just like a normal signal diode, but when a reverse voltage ... property. Many diodes described as "Zener" diodes rely instead on avalanche breakdown as the mechanism.

Description :  A device used to avoid the relay destroying the op-amp is A. diode B. LED C. reverse bias diode D. forward biased diode

Last Answer : reverse bias diode

Description : A straight line symbol shows the A. fuse B. diode C. connecting lead D. switch

Last Answer : connecting lead

Description : Device used to store energy in electrical circuits is A. resistor B. inductor C. capacitor D. diode

Last Answer : capacitor

Description : A component that allows only unidirectional current to pass through it is A. resistor B. inductor C. transformer D. diode

Last Answer : diode

Description : Which one among the following components can not be developed within an “integrated circuit”? (1) Diode (2) Triode (3) Transformer (4) Transistor

Last Answer : Transformer

Description : Which one among the following components is used as an amplifying device? (1) Transformer (2) Diode (3) Capacitor (4) Transistor

Last Answer : Transistor

Description : A NOT gate can be implemented by: (1) a single diode (2) two diodes (3) a single resistor (4) a single transistor

Last Answer : a single transistor

Description : The waveform of a certain signal can be studied by (1) Spectrometer (2) Cathode ray oscilloscope (3) p – n junction diode (4) Sonometer

Last Answer : Sonometer

Description : The device which transfer the signal from low resistance region to high resistance region is (1) diode (2) transistor (3) capacitor (4) inductor

Last Answer : transistor

Description : Which of the following circuit elements is used to ‘block’ DC in an electronic circuit ? (1) Resistances (2) Capacitance (3) Inductance (4) Diode

Last Answer : Capacitance

Description : Which of the following is used for regulated electric supply ? (1) Zener diode (2) Junction diode (3) Gun diode (4) Tunnel diode

Last Answer : Zener diode

Description : For which Diode is used ? (1) modulation (2) oscillation (3) amplification (4) purification 

Last Answer : purification

Description : What is filament of spirogyra?

Last Answer : Spirogyra is a genus of green algae that is commonly found in freshwater environments such as ponds, streams, and ditches. The filament of Spirogyra is a long, slender, multicellular structure ... , which occurs when the filament breaks into individual cells that can grow into new filaments.

Description : Approximately when did car makers stop using two headlights (and start using one with a high beam filament)?

Last Answer : I’m sure that I’ve seen late-model BMW and Chevy cars with separate high/low beam headlights. And I’ve seen models from the 1970s which had single-lamp assemblies with the high and low beam filaments built into the lamp, as you suggest.

Description : What is filament of a flower? -Biology

Last Answer : answer:

Description : What is filament of a flower? -Biology

Last Answer : answer:

Description : whether axial filament in tail travels through its complete length or certain part? -Biology

Last Answer : answer:

Description : whether axial filament in tail travels through its complete length or certain part? -Biology

Last Answer : answer:

Description : The filament of an electric bulb is made of which metal? -General Knowledge

Last Answer : The answer is 'Tungsten'

Description : The filament of an electric bulb is made of which metal? -General Knowledge

Last Answer : answer:

Description : The filament of a bulb is made up of -General Knowledge

Last Answer : answer:

Description : what does the filament do in the flower?

Last Answer : it holds up the anther so the insects get to it quickly also itdevelopes the pollen and everythin gels thats there and i just gootmy hair done and tis pretty i and i go to east and my name is jalenholla back

Description : Filament of electric bulb is made of which metal ?

Last Answer : The filament of an electric bulb is made of tungsten metal.

Description : Why is the filament of electric bulb made of tungsten ?

Last Answer : When electricity flows through the coil or filament of the thin wire of the bulb, it becomes very hot and radiates all around. Tungsten is a metal with the highest melting point and the highest tensile strength, making it a filament to make the bulb more durable.

Description : What is filament ?

Last Answer : : Inside the bulb is a thin tungsten wire coil attached to both ends of the wire. This is called filament.