whether axial filament in tail travels through its complete length or certain part? -Biology

whether axial filament in tail travels through its complete length or certain part? -Biology
by

1 Answer

Answer :

answer:
by

Related questions

whether axial filament in tail travels through its complete length or certain part? -Biology

Description : whether axial filament in tail travels through its complete length or certain part? -Biology

Last Answer : answer:

Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow (C) Generally, the diameter of the agitator is kept between l/3rd to l/6th of the tank diameter while the blade length is l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Description : Pick out the wrong statement pertaining to the turbine agitator. (A) Recommended peripheral speed for the turbine agitator is 200-250 metres/minute (B) Pitched blade turbine agitator gives only radial flow with ... l/4th of agitator diameter (with central disc, it is l/8th of the agitator diameter)

Last Answer : (B) Pitched blade turbine agitator gives only radial flow with complete absence of the axial flow

If the filament of the bulb is broken would the circuit be complete?

Description : If the filament of the bulb is broken would the circuit be complete?

Last Answer : If the bulb's filament is broken, the whole circuit becomes open. If the bulb is in a series circuit or is the only bulb, the electricity would no longer flow. If the bulb is in a parallel circuit, along with other bulbs, then only the blown bulb would go out, and the other bulbs would still work.

square cross section b/h/h'=400/400/40mm with a reinforcement ratio of p=0.015 is loaded for action forces of axial load plus uniaxial bending.the column is to be made of C25/30 concrete & S-460 steel.check whether the column AB is short or long?

Description : square cross section b/h/h'=400/400/40mm with a reinforcement ratio of p=0.015 is loaded for action forces of axial load plus uniaxial bending.the column is to be made of C25/30 concrete & S-460 steel.check whether the column AB is short or long?

Last Answer : 10001/999900

My head and tail both equal are, My middle slender as a bee. Whether I stand on head or heel Is quite the same to you or me. But if my head should be cut off, The matter's true, though passing strange Directly I to nothing change.What Am I? -Riddles

Description : My head and tail both equal are, My middle slender as a bee. Whether I stand on head or heel Is quite the same to you or me. But if my head should be cut off, The matter's true, though passing strange Directly I to nothing change.What Am I? -Riddles

Last Answer : The figure eight.

Different parts of a weld symbol are (i) Arrow, center line and back part (ii) Arrow, body line and length (iii) Arrow, body line and tail (iv)None

Description : Different parts of a weld symbol are (i) Arrow, center line and back part (ii) Arrow, body line and length (iii) Arrow, body line and tail (iv)None

Last Answer : (iii) Arrow, body line and tail

A camel travels a certain distance each day. Strangely enough, two of its legs travel 30 miles each day and the other two legs travel nearly 31 miles. It would seem that two of the camel's legs must be one mile ahead of the other two legs, but of course this can't be true. Since the camel is normal, how is this situation possible? -Riddles

Description : A camel travels a certain distance each day. Strangely enough, two of its legs travel 30 miles each day and the other two legs travel nearly 31 miles. It would seem that two of the camel's legs ... of course this can't be true. Since the camel is normal, how is this situation possible? -Riddles

Last Answer : The camel operates a mill and travels in a circular clockwise direction. The two outside legs will travel a greater distance than the two inside legs.

A camel travels a certain distance each day. Strangely enough, two of its legs travel 30 miles each day and the other two legs travel nearly 31 miles. It would seem that two of the camel's legs must be one mile ahead of the other two legs, but of course this can't be true.Since the camel is normal, how is this situation possible? -Riddles

Description : A camel travels a certain distance each day. Strangely enough, two of its legs travel 30 miles each day and the other two legs travel nearly 31 miles. It would seem that two of the camel's legs ... but of course this can't be true.Since the camel is normal, how is this situation possible? -Riddles

Last Answer : The camel operates a mill and travels in a circular clockwise direction. The two outside legs will travel a greater distance than the two inside legs.

A horse travels a certain distance each day. Strangely enough, two of its legs travel 30 miles each day and the other two legs travel nearly 31 miles. It would seem that two of the horse's legs must be one mile ahead of the other two legs, but of course this can't be true, since the horse is normal. How is this possible? -Riddles

Description : A horse travels a certain distance each day. Strangely enough, two of its legs travel 30 miles each day and the other two legs travel nearly 31 miles. It would seem that two of the horse's legs must be ... , but of course this can't be true, since the horse is normal. How is this possible? -Riddles

Last Answer : The horse operates a mill and travels in a circular clockwise direction. The two outside legs will travel a greater distance than the two inside legs.

The method of reversal (A) Is usually directed to examine whether a certain part is truly parallel or perpendicular to another (B) Makes the erroneous relationship between parts evident (C) Both (a) and (b) (D) Neither (a) nor (b)

Description : The method of reversal (A) Is usually directed to examine whether a certain part is truly parallel or perpendicular to another (B) Makes the erroneous relationship between parts evident (C) Both (a) and (b) (D) Neither (a) nor (b)

Last Answer : (C) Both (a) and (b

Who travels all over the world sitting in a certain place ?

Description : Who travels all over the world sitting in a certain place ?

Last Answer : The answer is postage stamp.

A certain thing is thrown twice from a place with the gap of 45 minutes between the two shots. A girl approaching this point in a train heard the second shot 44 minutes after she heard the first shot. What is the speed of train (in kmph) if sound travels at 660 m/s? a) 62 km/hr b) 54 km/hr c) 48 km/hr d) 27 km/hr

Description : A certain thing is thrown twice from a place with the gap of 45 minutes between the two shots. A girl approaching this point in a train heard the second shot 44 minutes after she heard the first shot. What is the speed of train ... travels at 660 m/s? a) 62 km/hr b) 54 km/hr c) 48 km/hr d) 27 km/hr

Last Answer : B Actual time between the two shots being fired = 45 minutes. If a girl was stationary she would have heard the shots after 44 minutes. But since the train was moving towards the source, she heard the second shot after ... = (15 *18/5) km/hr =54 km/hr Hence the speed of the train is 54 km/hr

The area of a drainage basin whose axial length is 100 km is 2500 sq. km. Its form factor is (A) 0.10 (B) 0.20 (C) 0.25 (D) 0.35

Description : The area of a drainage basin whose axial length is 100 km is 2500 sq. km. Its form factor is (A) 0.10 (B) 0.20 (C) 0.25 (D) 0.35

Last Answer : Answer: Option C

If the axial length of a drainage basin is 35 km and its form factor is 0.2, the total area of the basin is (A) 205 sq. km. (B) 215 sq. km. (C) 225 sq. km. (D) 245 sq. km.

Description : If the axial length of a drainage basin is 35 km and its form factor is 0.2, the total area of the basin is (A) 205 sq. km. (B) 215 sq. km. (C) 225 sq. km. (D) 245 sq. km.

Last Answer : Answer: Option D

In flowers the terminal part of a stamen, containing the pollen sacs is known as the: a) anther b) style c) filament d) pistil

Description : In flowers the terminal part of a stamen, containing the pollen sacs is known as the: a) anther b) style c) filament d) pistil

Last Answer : ANSWER: A -- Anther

Globular proteins have completely folded, coiled polypeptide chain and the axial ratio (ratio of length to breadth) is (A) Less than 10 and generally not greater than 3–4 (B) Generally 10 (C) Greater than 10 and generally 20 (D) Greater than 10

Description : Globular proteins have completely folded, coiled polypeptide chain and the axial ratio (ratio of length to breadth) is (A) Less than 10 and generally not greater than 3–4 (B) Generally 10 (C) Greater than 10 and generally 20 (D) Greater than 10

Last Answer : Answer : A

In a mixer, the quantity, (v. L/D) is termed as __________ number (where, v = longitudinal velocity of material, L = length of the mixer, D = diffusivity in axial mixing). (A) Weber (B) Peclet (C) Brinkman (D) Schmidt

Description : In a mixer, the quantity, (v. L/D) is termed as __________ number (where, v = longitudinal velocity of material, L = length of the mixer, D = diffusivity in axial mixing). (A) Weber (B) Peclet (C) Brinkman (D) Schmidt

Last Answer : (B) Peclet

Axial length of an unloaded helical compression spring is called (A) compressed length (B) solid length (C) free length (D) none of the above

Description : Axial length of an unloaded helical compression spring is called (A) compressed length (B) solid length (C) free length (D) none of the above

Last Answer : (C) free length

Axial length of the spring which is so compressed that the adjacent coils touch each other. (A) compressed length (B) solid length (C) free length (D) none of the above

Description : Axial length of the spring which is so compressed that the adjacent coils touch each other. (A) compressed length (B) solid length (C) free length (D) none of the above

Last Answer : (B) solid length

When two concentric springs are made of same material, having same free length and compressed equally by axial load, then the load shared by each spring is proportional to (A) Spring index of each spring (B) Wire diameter of each spring (C) Mean coil diameter of each spring (D) Square of wire diameter of each spring

Description : When two concentric springs are made of same material, having same free length and compressed equally by axial load, then the load shared by each spring is proportional to (A) Spring index of each spring ... spring (C) Mean coil diameter of each spring (D) Square of wire diameter of each spring

Last Answer : (D) Square of wire diameter of each spring

The form factor of a drainage basin is obtained by dividing (A) Area of the basin by the axial length (B) Average width of the basin by the axial basin (C) Area of the basin by the square of the axial length (D) Both (b) and (c

Description : The form factor of a drainage basin is obtained by dividing (A) Area of the basin by the axial length (B) Average width of the basin by the axial basin (C) Area of the basin by the square of the axial length (D) Both (b) and (c

Last Answer : Answer: Option D

Tortuosity of a meandering river is the ratio of (A) Meander belt to meander length (B) Meander length to meander belt (C) Curved length along the channel to the direct axial length of the river reach (D) Direct axial length of the river reach to curved length along the channel

Description : Tortuosity of a meandering river is the ratio of (A) Meander belt to meander length (B) Meander length to meander belt (C) Curved length along the channel to the direct axial length of the river reach (D) Direct axial length of the river reach to curved length along the channel

Last Answer : Answer: Option C

Which tissue helps in increasing the length of stem and root? OR Q: Which tissues are responsible for the axial growth of plants?

Description : Which tissue helps in increasing the length of stem and root? OR Q: Which tissues are responsible for the axial growth of plants?

Last Answer : Apical Meristem.

A kite and its tail total 32 feet in length. The tail is 18 feet longer than the length of the kite's body. How long is the kite's tail?

Description : A kite and its tail total 32 feet in length. The tail is 18 feet longer than the length of the kite's body. How long is the kite's tail?

Last Answer : 25 feet

Calculate the number of free electrons passing through the filament of an electric lamp in one hour when the current through the filament is 0.32 A.

Description : Calculate the number of free electrons passing through the filament of an electric lamp in one hour when the current through the filament is 0.32 A.

Last Answer : Calculate the number of free electrons passing through the filament of an electric lamp in one hour when the current through the filament is 0.32 A.

The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Description : The filament of an electric lamp becomes white hot but the lead-in wires holding the filament are only slightly heated because they (a) have smaller current passing through them (b) have very low resistance (c) have higher melting point (d) are made of black iron

Last Answer : Ans:(b)

By what process is heat transmitted from the filament of an evacuated electric bulb to the glass? (a) Conduction (b) Convection (c) Radiation (d) Heat cannot be transmitted through vacuum

Description : By what process is heat transmitted from the filament of an evacuated electric bulb to the glass? (a) Conduction (b) Convection (c) Radiation (d) Heat cannot be transmitted through vacuum

Last Answer : Ans:(c)

In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Description : In case of wet spinning of polymers, the polymer solution is forced through spinnerates into, a coagulating bath to give a filament form. Wet spinning is not used in case of the __________ fibres. (A) Viscose rayon (B) Acrylic (C) Polyvinyl acetate (D) Saturated polyeste

Last Answer : (D) Saturated polyeste

In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament form. Dry spinning is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Description : In case of dry spinning of polymers, the polymer solution in a volatile solvent is forced through the spinnerates into a warm air chamber, where the solvent evaporates leaving behind the polymer in the filament ... is used for __________ fibres. (A) Polythene (B) PVC (C) Rayon (D) Polyvinyl acetate

Last Answer : (B) PVC

The head of a whale is six feet long; his tail is as long as his head and half his body, and his body is half of his whole length. How long is the whale? -Riddles

Description : The head of a whale is six feet long; his tail is as long as his head and half his body, and his body is half of his whole length. How long is the whale? -Riddles

Last Answer : Forty-eight feet.

A uniformly distributed load (w) of length shorter than the span crosses a girder. The bending moment at a section in the girder will be maximum when (a) Head of the load is at the section (b) Tail of the load is at the section (c) Section divides the load in the same ratio as it divides the span (d) Section divides the load in two equal lengths.

Description : A uniformly distributed load (w) of length shorter than the span crosses a girder. The bending moment at a section in the girder will be maximum when (a) Head of the load is at the section (b) Tail ... load in the same ratio as it divides the span (d) Section divides the load in two equal lengths.

Last Answer : (c) Section divides the load in the same ratio as it divides the span

Consider the following statements: 1. A flute of smaller length produces waves of lower frequency. 2. Sound travels in rocks in the form of longitudinal elastic waves only. Which of the statements given above is/are correct? (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2

Description : Consider the following statements: 1. A flute of smaller length produces waves of lower frequency. 2. Sound travels in rocks in the form of longitudinal elastic waves only. Which of the statements given above is/are correct? (a) 1 only (b) 2 only (c) Both 1 and 2 (d) Neither 1 nor 2

Last Answer : Ans:(d)

.As a wave travels down a spring, the amplitude slowly decreases. Why does this occur? A. The law of conservation of energy does not apply to waves. B. The energy is spread out along the entire length of the spring. C. The wave slows down as it travels along the spring. D. Some energy is lost due to friction as the particles in the spring rub against each other. E. all of the above

Description : .As a wave travels down a spring, the amplitude slowly decreases. Why does this occur? A. The law of conservation of energy does not apply to waves. B. The energy is spread out along the entire ... due to friction as the particles in the spring rub against each other. E. all of the above

Last Answer : D. Some energy is lost due to friction as the particles in the spring rub against each other.

A train 200m in length, travels at 120 km/hr. In what time it will pass a boy who is walking at 12km an hour. a) against(opposite) it: b) in the same direction? A) 5.4,6.66 B) 7.2,5.2 C) 3.5,6 D) 12,16

Description : A train 200m in length, travels at 120 km/hr. In what time it will pass a boy who is walking at 12km an hour. a) against(opposite) it: b) in the same direction? A) 5.4,6.66 B) 7.2,5.2 C) 3.5,6 D) 12,16

Last Answer : ANSWER: A  Explanation: I) Speed of the train = 120 km/hr  Speed of the boy = 12 km/hr  Relative speed = (120 + 12) km/hr  Convert km/hr into m/s  132 km/hr = (132 * 5/ 18)m/s  = 36.66 m/s  Time = ... km/hr = (108 * 5 / 18)m/s  = 30 sec  Time = distance / speed  = 200 / 30  = 6.66 sec

In air-core cable the surge voltage travels approximately at the speed of light and a cable of 100m length gives a delay of a. 0.666μsec b. 0.333μsec c. 1.555μsec d. 1μsec

Description : In air-core cable the surge voltage travels approximately at the speed of light and a cable of 100m length gives a delay of a. 0.666μsec b. 0.333μsec c. 1.555μsec d. 1μsec 

Last Answer : In air-core cable the surge voltage travels approximately at the speed of light and a cable of 100m length gives a delay of a. 0.666μsec b. 0.333μsec c. 1.555μsec d. 1μsec 

What is filament of a flower? -Biology

Description : What is filament of a flower? -Biology

Last Answer : answer:

What is filament of a flower? -Biology

Description : What is filament of a flower? -Biology

Last Answer : answer:

On the weekend, do you have a special breakfast or is there a certain thing that you like to eat whether it's a work day or a weekend?

Description : On the weekend, do you have a special breakfast or is there a certain thing that you like to eat whether it's a work day or a weekend?

Last Answer : I do not eat breakfast.

Inquiries directed towards those charged with governance may most likely a. Relate to their activities concerning the design, and effectiveness of the entity's internal control and whether management has satisfactorily responded to any findings from these activities. b. Help the auditor understand the environment in which the financial statements are prepared. c. Relate to changes in the entity's marketing strategies, sales trends, or contractual arrangements with its customers. d. Help the auditor in evaluating the appropriateness of the selection and application of certain accounting policies

Description : Inquiries directed towards those charged with governance may most likely a. Relate to their activities concerning the design, and effectiveness of the entity's internal control and ... the auditor in evaluating the appropriateness of the selection and application of certain accounting policies

Last Answer : Help the auditor understand the environment in which the financial statements are prepared.

A mixed flow centrifugal pump (A) Employs such an impeller, through which the flow is a combination of radial & axial flow (B) Mixes the two fluids before pumping them (C) Pumps the two fluids separately and then mixes them (D) Employs impellers in both the radial & axial directions

Description : A mixed flow centrifugal pump (A) Employs such an impeller, through which the flow is a combination of radial & axial flow (B) Mixes the two fluids before pumping them (C) Pumps the two fluids separately and then mixes them (D) Employs impellers in both the radial & axial directions

Last Answer : (A) Employs such an impeller, through which the flow is a combination of radial & axial flow

Hallow cone nozzle – liquid is fed into whirl chamber through entry or through a fixed spiral passage to give rotation motion. a. Axial b. Radial c. tangential. d. None of above

Description : Hallow cone nozzle – liquid is fed into whirl chamber through entry or through a fixed spiral passage to give rotation motion. a. Axial b. Radial c. tangential. d. None of above

Last Answer : Ans- c. tangential.

I say everything I hear to others around. I'm not an animal, nor part of the human race. I will, immediately, repeat after you; But only if my tail is in place. What am I? -Riddles

Description : I say everything I hear to others around. I'm not an animal, nor part of the human race. I will, immediately, repeat after you; But only if my tail is in place. What am I? -Riddles

Last Answer : A microphone.

Term which is not a part of the weld symbol (i) Tail (ii) Arrow (iii) Temperature of welding (iv) None

Description : Term which is not a part of the weld symbol (i) Tail (ii) Arrow (iii) Temperature of welding (iv) None

Last Answer : (iii) Temperature of welding

A train travels between two stations 15 km apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform retardation, the maximum speed attained by the train during the journey will by a.125 km/hr b.107 dynes c.80 km/hr d.100 km/hr e.60 km/hr

Description : A train travels between two stations 15 km apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform retardation, the maximum speed attained by the train during the journey will by a.125 km/hr b.107 dynes c.80 km/hr d.100 km/hr e.60 km/hr

Last Answer : d. 100 km/hr

A train travels between two stations 15 km, apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform relardation, the maximum speed attained by the train, during, the journey, will be a.60 km/hr b.80 km/hr c.125 km/hr d.100 km/hr e.107 dynes

Description : A train travels between two stations 15 km, apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform relardation, the maximum speed attained by the train, during, the journey, will be a.60 km/hr b.80 km/hr c.125 km/hr d.100 km/hr e.107 dynes

Last Answer : d. 100 km/hr

A man goes to work at the same time each day and travels part of his journey facing forwards and the remainder facing backwards. When he returns at the end of his working day, he only faces forwards.How can this be? -Riddles

Description : A man goes to work at the same time each day and travels part of his journey facing forwards and the remainder facing backwards. When he returns at the end of his working day, he only faces forwards.How can this be? -Riddles

Last Answer : He works in the engine room of a liner! To get to work, he walks along the decks from his cabin facing forwards, and down the ladders between decks facing backwards. However, when he finishes, he only needs to face forwards to climb the ladders again and walk along the deck back to his cabin.

Which of the answers listed below best completes the statement: The rate at which any part of a wave travels from one place to another determines the wave's: w) propagation velocity x) period y) amplitude z) frequency

Description : Which of the answers listed below best completes the statement: The rate at which any part of a wave travels from one place to another determines the wave's: w) propagation velocity x) period y) amplitude z) frequency

Last Answer : ANSWER: W -- PROPAGATION VELOCITY

Where can I find information about whether modular homes are allowed to be built in a certain neighborhood?

Description : Where can I find information about whether modular homes are allowed to be built in a certain neighborhood?

Last Answer : I could find no evidence that modular homes are specifically regulated by the state at the neighborhood level. HOAs might prevent them from being built, though.

When an independent auditor is approached to perform an audit for the first time, he/she should make inquiries of the predecessor auditor. Inquiries are necessary because the predecessor may be able to provide the successor with information that will assist the successor in determining whether a. A certain amount of audit fee will be acceptable to the client. b. An unqualified opinion may be issued. c. The audit documentation by the predecessor auditor can be utilized. d. The engagement proposal should be accepted

Description : When an independent auditor is approached to perform an audit for the first time, he/she should make inquiries of the predecessor auditor. Inquiries are necessary because the predecessor may ... documentation by the predecessor auditor can be utilized. d. The engagement proposal should be accepted

Last Answer : The engagement proposal should be accepted