Why is the current behind the voltage in the RLC circuit ?

1 Answer

Answer :

Inductance prevents any change in current or flux. So the current stays behind the voltage.

Related questions

Description : In what ways can RLC be solved in parallel circuit ?

Last Answer : Answer : vector or phaser method , admixture method , vector algebra method , equivalent impedance method.

Description : In series RLC circuit at resonant a) Voltage is in phase with current b) Current is maximum c) Inductive reactance = Capacitive reactance d) All of the above

Last Answer : Ans: All of the above

Description : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor  A) Is always zero B) Can never be greater than the input voltage C) Can be greater than the input ... input voltage D) Can be greater than the input voltage, and is in phase with the input voltage

Last Answer : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor Can be greater than the input voltage, however, it is 90° out of phase with the input voltage 

Description : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?

Last Answer : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C? 7 V

Description : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the

Last Answer : A DC voltage source is connected across a series RLC circuit. Under steady-state conditions, the applied DC voltage drops entirely across the C only

Description : In a series-RLC circuit, what is the condition of the circuit if there is high impedance, low current, and low reactance voltages

Last Answer : Nonresonant (circuit is either above or below resonance)

Description : In a series RLC circuit operating below the resonant frequency the current  (a) I leads Vs (b) I lags Vs (c) I is in Phase with Vs (d) None of these

Last Answer : In a series RLC circuit operating below the resonant frequency the current  I leads Vs 

Description : In parallel RLC resonance circuit at resonance the current will be  (1) Minimum (2) Maximum (3) Zero (4) Infinite

Last Answer : In parallel RLC resonance circuit at resonance the current will be Minimum 

Description : In a series RLC high Q circuit, the current peaks at a frequency  (1) equal to the resonant frequency (2) greater than the resonant frequency (3) less than the resonant frequency (4) equal to half the resonant frequency

Last Answer : In a series RLC high Q circuit, the current peaks at a frequency equal to the resonant frequency

Description : In a series RLC circuit that is operating above the resonant frequency, the current : -  a) lags the applied voltage b) leads the applied voltage c) is in phase with the applied voltage d) is zero

Last Answer : In a series RLC circuit that is operating above the resonant frequency, the current : - lags the applied voltage

Description : What is the value of voltage and current of transformer ?

Last Answer : The value of voltage and current of the transformer depends on the number of patches of wires in the transformer.

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

Description : Why is the RLC series circuit called an acceptor circuit?

Last Answer : The series RLC circuit exhibits minimum resistance at resonance.This means an input at the resonant frequency will see maximumcurrent in that RLC circuit. Put another way, the RLC circuit issaid to ... the current of an input signal when that signalequals the resonant frequency of the RLC circuit.

Description : Derive an expression for resonant frequency of series RLC circuit.

Last Answer : At resonance frequency in RLC series circuit, we have inductive reactance is equal to capacitive reactance i.e.  Where fr is the resonant frequency in RLC series circuit. 

Description : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Last Answer : A parallel RLC circuit has the node equation Determine v(t) using the phasor method.

Description : The loop equation for a series RLC circuit gives

Last Answer : The loop equation for a series RLC circuit gives

Description : Define active power and reactive power for RLC series circuit.

Last Answer : Active Power (P): Active power (P) is given by the product of voltage, current and the cosine of the phase angle between voltage and current.  Unit: watt (W) or kilo-watt (kW) or Mega-watt ... volt-ampere-reactive (VAr), or kilo-volt-ampere-reactive (kVAr) or Mega-voltampere-reactive (MVAr) 

Description : Consider the following statements with respect to a high Q, series RLC circuit under resonance 1. The voltage across R is equal to the applied voltage 2. The voltage across L and C are zero 3 ... in magnitude 4. The voltage accross L and C are maximum Which of these statements are correct?

Last Answer : Consider the following statements with respect to a high Q, series RLC circuit under resonance 1. The voltage across R is equal to the applied voltage 2. The voltage across L and C are zero 3. ... The voltage accross L and C are maximum Which of these statements are correct? 1,3 and 4

Description : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - a) 225 MHz b) 1.06 MHz c) 10 KHz d) 10 MHz

Last Answer : The Q factor of a coil at resonant frequency 1.5 MHz of an RLC series circuit is 150. The Bandwidth is : - 10 KHz

Description : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is:  (1) 25 (2) 50 (3) 100 (4) 200

Last Answer : A series RLC circuit has a resonant frequency of 1 KHz and a quality factor Q = 100. If each of the R,L and C is doubled from its original value, the new Q of the circuit is: 200.

Description : A series RLC circuit has a resistance of 50 , inductance of 0.4H and a capacitor of 10µF. The circuit is connected across a 100V supply. The resonance frequency and the current through the resistance are 

Last Answer : A series RLC circuit has a resistance of 50 , inductance of 0.4H and a capacitor of 10µF. The circuit is connected across a 100V supply. The resonance frequency and the current through the resistance are 500 rad/s and 2A.

Last Answer : In an RLC parallel circuit, the impedance at resonance is Maximum.

Description : An RLC series. circuit remains predominantly inductive

Last Answer : Above resonance frequency

Last Answer : When the total impendance equals  supply frequency.

Description : What is Voltage Regulation ?

Last Answer : Answer : Voltage regulation is the difference between the voltage at the receiving end of a transmission line when it is unloaded and reloaded.

Description : Why is it important to know voltage regulation ?

Last Answer : Knowing the voltage regulation, the voltage at the load end can be kept within the specified range by the line voltage control devices.

Description : What is Voltage Source ?

Last Answer : It is a source through which a certain amount of voltage is obtained through its endpoints without relying on the value of load resistance. Usually the internal resistance of the voltage source is apporoximately zero.

Description : What is voltage source ?

Last Answer : The source through which a certain amount of voltage or energy is always supplied to the load is called the voltage source.

Description : What is voltage drop ?

Last Answer : Answer : The loss of electrical current along a conductor when an electric current passes through its conductor in a conductor or equipment is called voltage deficit .

Description : What is a voltage quadrupler ?

Last Answer : The voltage multiplier circuit input AC . Using a full cycle of voltage, the output is four times the amount of DC. Providing voltage is called voltage quadrupler.

Description : What is a Voltage Tripler ?

Last Answer : The voltage multiplier circuit input AC . Using a full voltage cycle, the output is three times the amount of DC. Providing voltage is called voltage tripper.

Description : What is Full Wave Voltage Doubler ?

Last Answer : The voltage multiplier circuit input AC . Using a full voltage cycle, double the amount of DC output. Providing voltage is called full wave voltage doubleler.

Description : What is Half Wave Voltage Doubler ?

Last Answer : The voltage multiplier circuit input AC . Using half a cycle of voltage, double the amount of DC output. Providing voltage is called half wave voltage doubleler.

Description : What is Voltage Multiplier ?

Last Answer : The rectifier circuit input AC . The output multiplier is called the voltage multiplier by receiving several times the increased DC voltage at the output.

Description : What is voltage ?

Last Answer : Answer : Voltage is a type of electrical pressure. The force or pressure required to displace the electrons inside a conductor is called voltage. In other words , the amount of work required to ... voltage to low voltage but the electrons of the conductor flow from low voltage to high voltage.

Description : What is Zener Voltage ?

Last Answer : pn If you keep increasing the voltage at the junction in the opposite direction, at the end of the day a huge amount of electric current is suddenly found. It seems that the potential barrier of ... for which this occurs in the case of a reversible tendency is called Zener voltage or Zener voltage .

Description : What is the requirement of voltage stabilizer ?

Last Answer : : Requirement of voltage stabilizer Computer is a highly sensitive electrical device. For this uninterrupted power supply is required. It can also cause a lot of damage due to subtle changes in flow rate ... from there. It does not directly affect the change in the angle of supply for the computer.

Description : What is voltage stabilizer ?

Last Answer : : It is an electronic device that keeps the electrical voltage constant. If for some reason the value of voltage in the main supply line fluctuates, it also changes the internal electrical system of the ... and the power supply is cut off. It can be used to protect electrical equipment from damage

Description : What is the voltage rating of the capacitor ?

Last Answer : : The maximum voltage that the capacitor operates is called the voltage rating of the capacitor. This voltage rating of the capacitor is expressed by the letter V.

Description : What should be the voltage level of negative logic ?

Last Answer : Negative logic voltage level should be low .

Description : What is the source of voltage of Karshof ?

Last Answer : : Karshoff's voltage formula: The algebraic sum of all emfs and all voltage drops in a closed electrical network is zero.

Description : What is the voltage expressed by ?

Last Answer : Voltage is expressed by " V" .

Description : What is voltage ?

Last Answer : The force or pressure applied to conduct electrons through a conductive wire is called voltage.

Description : How many voltage measurements ?

Last Answer : The unit of measurement of voltage is voltage.

Description : What is the frequency of voltage generated in Bangladesh ?

Last Answer : The frequency of the generated voltage is 50 c / s

Description : What is the relation of voltage with power ?

Last Answer : Power is proportional to P, voltage to V. For example: P = VI, P = V ^ 2 / R , that is, if the voltage increases, the power will increase.

Description : What is the formula for diagnosing voltage deficiency ?

Last Answer : The formula for determining voltage deficit is V = IR

Description : What is the highest transmission voltage in Bangladesh ?

Last Answer : Bangladesh's highest transmission voltage is 400 kV.

Description : What is Ohm's voltage formula ?

Last Answer : : Current flowing through a conductor at a constant temperature is proportional to the voltage across the two ends of the conductor. Or the current flowing through a conductor at a constant ... to the voltage difference between the two ends of that conductor and disproportionate to the resistance.