What is the multiplying factor of shunt ?

What is the multiplying factor of shunt ?
by

1 Answer

Answer :

Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.
by

Related questions

What is ammeter shunt ?

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

What is Emitter Shunt Register ?

Description : What is Emitter Shunt Register ?

Last Answer : To increase the range of the ammeter, a low value resistor is connected in parallel with the coil , called the ammeter shunt resistor.

What is Diversity Factor ?

Description : What is Diversity Factor ?

Last Answer : Diversity factor is the sum of the individual maximum demand and the ratio of the maximum demand of the plant.

What is capacity factor ?

Description : What is capacity factor ?

Last Answer : The ratio between the total power produced at a given time and if the plant is running at full capacity at that time, is called capacity factor.

What is Demand Factor ?

Description : What is Demand Factor ?

Last Answer : Demand factor is the ratio of the maximum demand of electricity to the connected load.

What is load factor ?

Description : What is load factor ?

Last Answer : The ratio of average load to maximum load of a power plant or customer is called load factor.

What is the best economic power factor ?

Description : What is the best economic power factor ?

Last Answer : This means that raising the power factor results in maximum annual savings , in which case the value of the power factor is called the best saving power factor.

What happens if the value of power factor is low ?

Description : What happens if the value of power factor is low ?

Last Answer : ( a) Current flows more , ( b) Copper loss increases , ( c) Heat increases , ( d) Output decreases , ( e) Voltage drop increases , ( f) Different electrical machinery heats up quickly. , ( G) The life span of various electrical machinery and appliances is reduced.

What is the Leading Power Factor ?

Description : What is the Leading Power Factor ?

Last Answer : When the capacitive load of an AC circuit exceeds the inductive load , the pf of the circuit is called the leading pf . Thank you!

What is Lagging Power Factor ?

Description : What is Lagging Power Factor ?

Last Answer : When the inductive load of an AC circuit exceeds the capacitive load , the pf of the circuit is called lagging pf .

What is Unity Power Factor ?

Description : What is Unity Power Factor ?

Last Answer : There is no angular gap between current and voltage in pure resistance. That is, the phase angle of current and voltage is φ = 0, the power factor of that circuit is one or unit. This is called Unity Power Factor.

What is the leading power factor ?

Description : What is the leading power factor ?

Last Answer : When the amount of capacitive load is more than the inductive load in a circuit then the power factor of that circuit is called leading power factor.

What is lagging power factor ?

Description : What is lagging power factor ?

Last Answer : When the amount of inductive load is greater than the capacitive load in a circuit then the power factor of that circuit is called lagging power factor.

What is the form factor ?

Description : What is the form factor ?

Last Answer : The ratio of the working value to the average value of an AC wave is called the form factor. Its value is 1.11.

What is the power factor in pure resistive , capacitive , inductive load ?

Description : What is the power factor in pure resistive , capacitive , inductive load ?

Last Answer : Answer : Power factor cosΦ = 1 in pure resistive load, cosΦ = 0 in capacitive load , cosΦ = 0 in inductive load .

How many types of power factor ?

Description : How many types of power factor ?

Last Answer : Three types , namely , 1) lagging power factor , 2) leading power factor , 3) unity power

What is the effect of resistance and reactance on power factor ?

Description : What is the effect of resistance and reactance on power factor ?

Last Answer : Power factor depends on resistance and reactance. As the resistance of the circuit increases, the phase angle between the current and the voltage decreases, resulting in an increase in the power factor ... current and the voltage increases, resulting in a decrease in the power factor of the circuit.

What is lagging power factor ?

Description : What is lagging power factor ?

Last Answer : The cosine value of the phase angle between current and voltage in an inductive circuit is called lagging power factor.

What is Power Factor ?

Description : What is Power Factor ?

Last Answer : The phase factor or the cosine value of the angular interval between the voltage and current of an AC circuit is called the power factor.

When is the power factor lagging , leading , unity ?

Description : When is the power factor lagging , leading , unity ?

Last Answer : Power factor lagging in inductive load. Power factor leading in capacitive load is power factor unity in resistive load.

What is a Power Factor Meter ?

Description : What is a Power Factor Meter ?

Last Answer : The cosine angle between voltage and current is called power factor

What is the value of power factor ?

Description : What is the value of power factor ?

Last Answer : The value of power factor is Cos Theta

What is the power factor expressed by ?

Description : What is the power factor expressed by ?

Last Answer : The power factor is expressed by cos theta.

What is Fusing Factor ?

Description : What is Fusing Factor ?

Last Answer : : The ratio of minimum fusing current and current rating of fuse of fuse is called fusing factor.

What is Leading Power Factor ?

Description : What is Leading Power Factor ?

Last Answer : If the current in the AC circuit is ahead of the voltage, it is called leading power factor.

What is Quality Factor ?

Description : What is Quality Factor ?

Last Answer : Resonant frequency and band thickness ratio is called quality factor.

When multiplying a decimal by a whole number is the number of decimal places in the product the same as the number of decimal places in the decimal factor?

Description : When multiplying a decimal by a whole number is the number of decimal places in the product the same as the number of decimal places in the decimal factor?

Last Answer : Not necessarily: for example, consider 0.5 * 4 = 2

Pick up the correct statement from the following: (A) The unit hydrograph of a specified unit duration obtained from the past data can be used to obtain the hydrograph of future storms of like duration (B) To obtain the ordinates of storm hydrograph, the ordinates of unit hydrograph are multiplied by the multiplying factor (C) The multiplying factor for storm hydrograph may be obtained by dividing the run off in mm by 25 mm (D) All the above

Description : Pick up the correct statement from the following: (A) The unit hydrograph of a specified unit duration obtained from the past data can be used to obtain the hydrograph of future storms of like duration (B) ... hydrograph may be obtained by dividing the run off in mm by 25 mm (D) All the above

Last Answer : Answer: Option D

The grade resistance factor for an earth moving machine can be obtained by multiplying grade percentage by a factor approximately equal to (A) 2 kg/tonne (B) 6 kg/tonne (C) 9 kg/tonne (D) 20 kg/tonne

Description : The grade resistance factor for an earth moving machine can be obtained by multiplying grade percentage by a factor approximately equal to (A) 2 kg/tonne (B) 6 kg/tonne (C) 9 kg/tonne (D) 20 kg/tonne

Last Answer : (C) 9 kg/tonne

A single phase wattmeter rated for 500 V; 5A is having full scale deflection of 1000 watt. What is multiplying factor of the wattmeter?

Description : A single phase wattmeter rated for 500 V; 5A is having full scale deflection of 1000 watt. What is multiplying factor of the wattmeter?

Last Answer : Answer :

What is the conductivity of molar ?

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

How do I purchase a product ?

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

What is Zener Diod ?

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

What is short circuit current ?

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

What is the method of diagnosing short circuit current ?

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

What are symmetrical and asymmetrical faults ?

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

What is Basbar and Bas Kaplar ?

Description : What is Basbar and Bas Kaplar ?

Last Answer : Basbar : Basbar is basically a sheet or color of copper or aluminum. It is the job of the bus driver to deliver power to one or more lads with power from one or more cables. Bus ... is basically a combination of circuit breaker and isolator. There are fire proof walls around the bus coupler.

Why is the busbar sectionalized ?

Description : Why is the busbar sectionalized ?

Last Answer : Answer : If an error occurs in any part of the busbar, the operation of the entire busbar system will not stop. The maximum success of this system is due to the interconnection of different sections of the circuit and the smooth distribution in the outgoing circuit.

title : _

Description : title : _

Last Answer : Basbar is a type of copper and aluminum conductive sheet or mata rod , which collects electrical energy from one or more circuits and distributes that energy through one or more circuits.

Write different font names or different short circuit font names ?

Description : Write different font names or different short circuit font names ?

Last Answer : There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three ... result c) Double line to ground font d) Two phase one Circuit and third phase earth.

What is Electrical Fault ? What is the cause of the fault ?

Description : What is Electrical Fault ? What is the cause of the fault ?

Last Answer : Answer : Fault: When two or more conductors come in contact with each other while operating at normal voltage difference, the result is said to be organized. Causes of Fault: Faults are organized due to ... loss of line c) Lightning charge d) Voltage drop e) Loss of unbalance and stability etc.

What features should a switchgear have ?

Description : What features should a switchgear have ?

Last Answer : Switchgear should have the following characteristics- a) Sensitivity b) Detection ability c) Reliability d) High speed e) Durability. F) Expansion advantage g) Simplicity.

What are the components of switch gear ?

Description : What are the components of switch gear ?

Last Answer : The components of switch gear are: circuit breaker , relay , instrument transformer , housing , conductor etc.

What do you mean by switchgear ?

Description : What do you mean by switchgear ?

Last Answer : Answer : Switch gear does not mean a single corner object. It refers to the position of the electromagnetic system, including the connective , isolating , and maintenance equipment of normal activity .

What is an Earth Electrode ?

Description : What is an Earth Electrode ?

Last Answer : Puta metal part in the soil which connects to the soil is called earth electrode. Thank you all for today's electrical questions and answers.

What is Earthing Lead ?

Description : What is Earthing Lead ?

Last Answer : The wire that connects the earth continuity wire and the earth electrode is called the earthing lead.

What earthing is done in hilly areas ?

Description : What earthing is done in hilly areas ?

Last Answer : Sheet earthing is done in hilly areas. Shit electrodes are placed by digging trenches on the slopes of the hill.

What should be the size of rod earthing ?

Description : What should be the size of rod earthing ?

Last Answer : In case of iron or steel rod the diameter is 16 mm but in case of copper rod it is 12.5 mm. In both cases the length is at least 2.5 m. Is to be.