Write different font names or different short circuit font names ?

1 Answer

Answer :

There are two main types of short circuit faults. Namely- 1. Semantic faults and 2. Asymmetrical font Symmetrical fault - a) Short circuit three phases together b) Short circuit asymmetrical fault with three phases together earth - a) Single line to ground fault b) Line to line result c) Double line to ground font d) Two phase one Circuit and third phase earth.

Related questions

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

Description : Why is the side-side shorted during the short circuit test in the transformer ?

Last Answer : During this test, any side of the transformer can be shorted, but for the following reasons, the side-side is shorted and 1. Lay-range instruments have the advantage of being connected to the high side ... both windings below 3% of the rated output , so it is convenient to measure on the high side.

Description : What information is available from the short circuit test of the transformer ?

Last Answer : The following information is available from the short circuit test 1. Equivalent resistance ( R.) . 2. Equivalent Reactance ( X.) . 3. Equivalent impedance ( Z.) 4. Copper loss 5. Skills and Regulation

Description : What is a short circuit test ?

Last Answer : Answer : A short circuit test is a test performed by shorting one side of the transformer and supplying a very low voltage of rated voltage with the help of a variant on the other side.

Description : What is the reason why wattmeter indicates only copper loss during transformer short circuit test ?

Last Answer : Answer : The voltage applied in this test is limited to 5% to 10% of the rated voltage . As a result, much less mutual flux ( Φm) is produced in the core than normal mutual flux. Since ... Φm² , the core loss is practically zero. Thus the whole of the wattmeter reading is considered copper loss.

Description : Why is core loss zero during short circuit test ?

Last Answer : The voltage applied by the varicus on the high side is very low , so the mutual flux in the core is also very low. So core loss is zero.

Description : What is a short circuit ?

Last Answer : Excess electricity flows through a short circuit , which causes heat , sparks, etc. When the voltage drops, the electric pressure increases. That is, voltage is called the pressure of electricity. When the ... do not know the real cause of any kind of electrical fault is called short circuit.

Description : What is a short circuit ? What is meant by short circuit ?

Last Answer : : A short circuit is an electromotive circuit that involuntarily causes abnormal current to flow through the connecting wire. In this case electricity has to overcome very little resistance. As a ... sparks of electricity are created. And if an animal touches this circuit, it gets electrocuted.

Description : What are the names of different types of logic ?

Last Answer : High / Low, True / False, On / Off 0/1

Description : What are some of the names currently used ?

Last Answer : The following are some of the names mentioned: 1. Digital Watch 2. Digital Radio 3. Digital Computer 4. Digital Monitor 5. Digital Thermometer 6. Digital Television 7. Mobile 8. Calculator.

Description : What are the names of the most widely used hardware resources in the network ?

Last Answer : The most widely used hardware resources in the network are: 1 / Printer 2 / Fax 3 / Modem 4 / Scanner.

Description : Why is the capacitance ignored in the short transmission line ?

Last Answer : Capacitance is ignored due to low line length and low line voltage.

Description : What is a short transmission line ?

Last Answer : A transmission line that is limited to a length of 50 km and a line voltage of 20 kV is called a short transmission line.

Description : What type of circuit is the transmission line ?

Last Answer : Answer : The transmission line is a bilateral circuit.

Description : What is the purpose of open circuit test in transformer ?

Last Answer : The following information is obtained from this test and the product is tested in open circuit. Core Loss (Eddy Current Loss and Hysteresis Loss) No-Laid Current Magnetizing Current ( I) Working Current ( I) ... ( R0) Core Loss Reactance ( X) No-Laid Power Factor ( cose,) Transformation Ratio ( a)

Description : What is Open Circuit Test of Transformer ?

Last Answer : Answer : The test is performed at the rated normal full voltage and frequency of the transformer by placing the required number of measuring instruments on either side of the transformer (usually high voltage-side). It is called open circuit test.

Description : Why High Side Playing is done while doing Open Circuit Test ?

Last Answer : Answer : Rated voltage supply is given on one side of the transformer (usually high side). This supply results in a voltmeter rated voltage connected to the circuit , a no-load current ( Io) in ... side play is used during open circuit testing to find out the core loss using low range instruments.

Description : Why Open Circuit Test ?

Last Answer : Open circuit test is done to find out the core loss of transformer.

Description : What is a series & parallel circuit ?

Last Answer : All circuits have only one path of current flow called series circuit. Circuits that have two or more currents of current flow are called parallel circuits.

Description : What do you mean by DC circuit ?

Last Answer : DC means direct current. All the circuits that work through the DC source are called DC circuits .

Description : Why is the current behind the voltage in the RLC circuit ?

Last Answer : Inductance prevents any change in current or flux. So the current stays behind the voltage.

Description : What is a Resonant Circuit ?

Last Answer : When the inductive reactance and capacitance are equal in an AC series circuit , then that circuit is called resonant circuit.

Description : What is the difference between an electrical circuit and an electrical network ?

Last Answer : An electrical circuit is a closed path that is made up of electrical energy sources , resistors and other circuit elements through which current flows or can flow easily. But any system ... or more sources of electrical energy and different types of circuit components is called electrical network.

Description : What is a circuit parameter ?

Last Answer : The components used in an electrical circuit, each of which performs a specific function, are called circuit parameters. E.g. , resistance , inductance , capacitance.

Description : In what ways can RLC be solved in parallel circuit ?

Last Answer : Answer : vector or phaser method , admixture method , vector algebra method , equivalent impedance method.

Description : How many types of power in AC circuit ?

Last Answer : Three types of power in AC circuit. Namely , 1) actual power , 2) reactive power , 3) apparent power.

Description : What is meant by "integrated circuit" and "open circuit" ?

Last Answer : Answer : Integrated circuit refers to a complete electrical path through which electric current can flow through a horizontal electric field.

Description : What is an integrated circuit ?

Last Answer : An integrated circuit (English integrated circuit) is a very small electronic circuit built on a semi-conductor component. It is also known as microchip , silicon chip , silicon chip , IC ( IC, short for Integrated Circuit ) or computer chip.

Description : Why is the circuit breaker turned off automatically ?

Last Answer : Circuit breakers are automatically turned off to protect electrical equipment from damage. An automatic switch is used to protect the electrical circuit or electrical equipment from damage due to ... is stopped and the electrical equipment connected to the circuit is protected from damage.

Description : What is Earth Leakage Circuit Breaker ?

Last Answer : Earth leakage circuit breaker is a protective device which protects the leaky faulty or faulty circuit from dangerous parts by separating it from the good parts. The leakage current of the circuit flows ... a faulty place due to a leakage error in the circuit is called a leakage circuit breaker.

Description : What is an Air Circuit Breaker ?

Last Answer : Air circuit breaker is a circuit breaker which is controlled by air, that is, a breaker which is turned on by air pressure and turned off by air pressure .

Description : What is Oil Circuit Breaker ?

Last Answer : An oil circuit breaker is a circuit breaker that contains oil and is in operation or on-off insulation oil . The oil used in the oil circuit breaker acts as insulation and extinguishes the arc. ... types. A) Plain brake type bulk oil circuit breaker and b) Arc controlled bulk oil circuit breaker.

Description : What is a standard circuit ?

Last Answer : A circuit that has five main components (such as voltage source , protection device , control device , electrical load and conductor wire) is called an ideal circuit.

Description : What is a circuit breaker ?

Last Answer : When excessive current flows in any faulty circuit , it is called circuit breaker which disconnects automatically or automatically.

Description : What are the main components of an electrical circuit ?

Last Answer : 5 main components of electrical circuit. 1. Conductor 2. Source 3. Security system 4. Control system 5. Load

Description : What is a parallel circuit ?

Last Answer : Multiple resistors or loads are connected to each other in a landscape of electrical sources in such a way that multiple paths of current flow exist but are called parallel circuits.

Description : What is an electrical circuit ?

Last Answer : Electrical circuit is the process by which electricity flows out of a source through conductors , regulatory systems and loads and returns to the source.

Description : What are the components of a standard circuit ?

Last Answer : An ideal circuit has 5 components such as: 1. Source: Generator , Battery II. Defender: Fuse , cut out 3. Control device: switch 4. Load: Lamp , fan 5. Conductor: His

Description : What is a series circuit ?

Last Answer : Circuits that have only one path of current are called series circuits.

Description : What is the formula for determining the power in a circuit ?

Last Answer : The formula for circuit power is P = V * I watt here , P is power V is voltage I is current.

Description : What is a clamping circuit ? What is a clamping circuit ?

Last Answer : A circuit that allows the positive or negative vertices of the input signal to be placed at the desired DC level is called a clamping circuit.

Description : What type of circuit is used in the house ?

Last Answer : Parallel circuit is used in home.

Description : Which circuit has multiple paths of electricity ?

Last Answer : There are multiple ways to conduct electricity in a parallel circuit.

Description : What is the reason for using circuit breaker in circuit ?

Last Answer : Circuit breakers are used for safety.

Description : Write the limitations of Kelvin's formula ?

Last Answer : As sometimes the cross section of the wire is so low that the regulation increases as the voltage drop increases . Increases , interest and waste change as space and time change.

Description : Write Kelvin's formula ?

Last Answer : In the case of energy transport , the cross-section of the lowest cost line conductor will occur only when the annual waste and interest cost is equal to the annual waste cost .

Description : Write the formula from Star to Delta ?

Last Answer : Answer : Dividing the product of the resistors connected to the star by dividing the resistors of the opposite arm by taking two together, the quotient is equal to the value of each resistor connected.

Description : Write the maximum power transfer theorem ?

Last Answer : The maximum power transfer from a DC source to a resistive load will occur only when the internal resistance is equal to the series resistance connected to the load resistance source .

Description : Write the Thebin Theorem ?

Last Answer : The current of a load resistance connected to two points of a complex network consisting of multiple sources of EMF and resistance will be the same if the load is connected to a single fixed source of EMF .