What earthing is done in hilly areas ?

What earthing is done in hilly areas ?
by

1 Answer

Answer :

Sheet earthing is done in hilly areas. Shit electrodes are placed by digging trenches on the slopes of the hill.
by

Related questions

Why is earthing done ?

Description : Why is earthing done ?

Last Answer : Earthing is done to allow the current to flow to the ground during an electrical fault so that the protection device can work to disconnect the faulty circuit.

What is Earthing Lead ?

Description : What is Earthing Lead ?

Last Answer : The wire that connects the earth continuity wire and the earth electrode is called the earthing lead.

What should be the size of rod earthing ?

Description : What should be the size of rod earthing ?

Last Answer : In case of iron or steel rod the diameter is 16 mm but in case of copper rod it is 12.5 mm. In both cases the length is at least 2.5 m. Is to be.

Which earthing is less expensive ?

Description : Which earthing is less expensive ?

Last Answer : Rod earthing is the least expensive. Because the soil does not have to be eroded, the cost is less than other earthing.

How many types of earthing and what are they ?

Description : How many types of earthing and what are they ?

Last Answer : There are two types of earthing , namely _ a) system earthing b) equipment earthing.

What are the essential elements for earthing ?

Description : What are the essential elements for earthing ?

Last Answer : They are _ a) earthen continuity b) earthing lead c) earthy electrode

What is the best earthing method ?

Description : What is the best earthing method ?

Last Answer : Pipe earthing method is best. This is because it is less expensive and when the soil dries out in the dry season , regular earthing can be done by pouring water through the pipes.

What is Earthing ?

Description : What is Earthing ?

Last Answer : Earthing is the process of safely passing electrical current to the earth's surface with the help of a wire from the metal enclosure of electrical equipment and people to protect them from unwanted electricity.

Where are railways developed in hilly areas and why? Trace their history in the colonial period. -Geography

Description : Where are railways developed in hilly areas and why? Trace their history in the colonial period. -Geography

Last Answer : Railway tracts are laid through low hills, gaps or tunnels in the hilly terrains of peninsular region. In the places such as Himalayan regions, it is not favourable to construct railway lines. ... west coast has facilitated the movement of passengers and goods in this most economic region of India.

What steps can be taken to control soil erosion in hilly areas? -Geography

Description : What steps can be taken to control soil erosion in hilly areas? -Geography

Last Answer : The methods of soil conservation in hilly regions are : (i) Plowing along the contour lines decreases the speed of water low down the slopes. (ii) terrace cultivation on slopes decreases ... shelterbelts have led to the stabilization of sand dunes and in stabilizing the desert in western India.

Answer the following questions in about 30 words. What steps can be taken to control soil erosion in the hilly areas ? -SST 10th

Description : Answer the following questions in about 30 words. What steps can be taken to control soil erosion in the hilly areas ? -SST 10th

Last Answer : In the hilly areas soil erosion can be controlled by 1. Ploughing across contour lines can slow down the water flow in the slopes. This is known as Contour ploughing. 2. Making use of terrace ... of grass to check erosion by wind and water. This divides the wind force and causes less damage.

What steps can be taken to control soil erosion in hilly areas? -SST 10th

Description : What steps can be taken to control soil erosion in hilly areas? -SST 10th

Last Answer : (i) Ploughing along the contour lines can decelerate the flow of water down the slopes. This is contour ploughing. (ii) Steps can be cut out on the slopes maping terraces. Terrace cultivation ... erosion. Large fields are divided into strips and strips of grass are left to grow between the crops.

What steps can be taken to control soil erosion in hilly areas? -SST 10th

Description : What steps can be taken to control soil erosion in hilly areas? -SST 10th

Last Answer : Methods of soil conservation: (i) Contour ploughing or ploughing along the contour lines of a highland can decelerate the flow of water down the slopes. (ii) Terrace cultivation or cutting of steps ... . (iv) Afforestation or planting of trees in the hilly regions can help in soil conservation.

How many hilly areas in Bangladesh ?

Last Answer : 10 percent hilly areas of Bangladesh.

The National Forest Policy of India has recommended ____ percent forest cover for hilly areas.

Description : The National Forest Policy of India has recommended ____ percent forest cover for hilly areas.

Last Answer : The National Forest Policy of India has recommended ____ percent forest cover for hilly areas. A. 67 B. 33 C. 19.4 D. 30

Which of the following are true with respect to Indian Railways? 1. It is the larqest public sector undertaking 2. Indian Railway network is the fourth largest in the world 3. Factories at Kapurthala and Perarnbur manufacture passenger coaches 4. The narrow guage lines are confined to the hilly areas only (a) I, II and III (b) I and II (c) II, III and IV (d) I, II, III and IV

Description : Which of the following are true with respect to Indian Railways? 1. It is the larqest public sector undertaking 2. Indian Railway network is the fourth largest in the world 3. Factories at Kapurthala and Perarnbur manufacture passenger ... III (b) I and II (c) II, III and IV (d) I, II, III and IV

Last Answer : Ans: (d)

Which of the gauges is used in the hilly areas? A. Narrow Gauge B. Meter Gauge C. Broad Gauge D. Special Gauge

Description : Which of the gauges is used in the hilly areas? A. Narrow Gauge B. Meter Gauge C. Broad Gauge D. Special Gauge

Last Answer : A [Narrow Gauge] Explanation: Narrow gauge is used in the hilly areas.

Water pipes in hilly areas often burst on a cold frosty night, because – (1) The material of which pipes are made contracts due to cold and so breaks (2) Water in the pipes freezes and on freezing water expands, so pipes break (3) Frost makes the pipes rusty, so they break (4) None of these

Description : Water pipes in hilly areas often burst on a cold frosty night, because – (1) The material of which pipes are made contracts due to cold and so breaks (2) Water in the pipes freezes and on freezing water expands, so pipes break (3) Frost makes the pipes rusty, so they break (4) None of these

Last Answer : (2) Water in the pipes freezes and on freezing water expands, so pipes break Explanation: The temperature may fall below 0° C during cold frosty nights which converts the water inside the pipes into ice, ... in an increase in volume. This exerts great force on the pipes and as a result, they burst.

The drop man holes are generally provided in sewers for A. Industrial areas B. Large town ships C. Hilly town ships D. Cities in plains

Description : The drop man holes are generally provided in sewers for A. Industrial areas B. Large town ships C. Hilly town ships D. Cities in plains

Last Answer : ANS: C

What is the main natural cause of disruption of roads in hilly areas

Description : What is the main natural cause of disruption of roads in hilly areas

Last Answer : landslide

Goitre is common in hilly areas.

Description : Goitre is common in hilly areas.

Last Answer : Ans: Goitre is common in hilly areas because there is deficiency of Iodine in the water.

Virus free seeds of potato are produced in a. Hilly areas b. Spring crop c. In plains d. Autumn crop

Description : Virus free seeds of potato are produced in a. Hilly areas b. Spring crop c. In plains d. Autumn crop

Last Answer : Hilly areas

Which one is a major environmental and safety hazard for the people in hilly areas in Tripura which can be considered as “cancer of hill slopes” a) Flood (b) Landslide (c) Earthquake (d) Desertification

Description : Which one is a major environmental and safety hazard for the people in hilly areas in Tripura which can be considered as “cancer of hill slopes” a) Flood (b) Landslide (c) Earthquake (d) Desertification

Last Answer : (b) Landslide

Intersection method of detailed plotting is most suitable for (A) Forests (B) Urban areas (C) Hilly areas (D) Plains

Description : Intersection method of detailed plotting is most suitable for (A) Forests (B) Urban areas (C) Hilly areas (D) Plains

Last Answer : (C) Hilly areas

Alignment of highways in hilly regions, is decided on (A) Long stretch of very hard cutting (B) Number of river crossings (C) Natural unstable areas (D) All the above

Description : Alignment of highways in hilly regions, is decided on (A) Long stretch of very hard cutting (B) Number of river crossings (C) Natural unstable areas (D) All the above

Last Answer : Answer: Option D

Water pipes in hilly areas often burst on a cold frosty night, because (1) the material of which pipes are made contracts due to cold and so breaks (2) water in the pipes freezes and on freezing water expands, so pipes break (3) frost makes the pipes rusty, so they break (4) None of these

Description : Water pipes in hilly areas often burst on a cold frosty night, because (1) the material of which pipes are made contracts due to cold and so breaks (2) water in the pipes freezes and on freezing water expands, so pipes break (3) frost makes the pipes rusty, so they break (4) None of these

Last Answer : water in the pipes freezes and on freezing water expands, so pipes break

(i) Suggest the relevant method of water-proofing used for following construction. 1) Basement of buildings. 2) Swimming pool. 3) Water tank. (ii) Suggest the relevant method of transportation of concrete used for construction in following situation. 1) Concreting in hilly areas. 2) Concreting of high-rise building. 3) Concreting under water.

Description : (i) Suggest the relevant method of water-proofing used for following construction. 1) Basement of buildings. 2) Swimming pool. 3) Water tank. (ii) Suggest the relevant method of transportation of ... 1) Concreting in hilly areas. 2) Concreting of high-rise building. 3) Concreting under water.

Last Answer : Method of water-proofing for: 1) Basement of buildings: Waterproofing by using waterproof sealants. 2) Swimming pool: Waterproofing by spraying or grouting in cracks. 3) Water tank: Waterproofing by ... , concrete pump, slip form technique. 3) Concreting under water: Tremie pipe, grout pipe.

Why is line transposition done ?

Description : Why is line transposition done ?

Last Answer : The average inductance value of each line is found to be equal when transposed.

Why High Side Playing is done while doing Open Circuit Test ?

Description : Why High Side Playing is done while doing Open Circuit Test ?

Last Answer : Answer : Rated voltage supply is given on one side of the transformer (usually high side). This supply results in a voltmeter rated voltage connected to the circuit , a no-load current ( Io) in ... side play is used during open circuit testing to find out the core loss using low range instruments.

Why is soldering done ?

Description : Why is soldering done ?

Last Answer : Soldering is done to increase the strength and durability of electrical wiring joints and to ensure uninterrupted wiring and protection from corrosive processes due to unforeseen nature.

What is done with electronic oven ?

Description : What is done with electronic oven ?

Last Answer : Food is cooked with electric oven.

What tests can be done with ohm meter ?

Description : What tests can be done with ohm meter ?

Last Answer : Only resistance is measured with ohm meter.

Why is tapping done ?

Description : Why is tapping done ?

Last Answer : Tapping is done at the junction to prevent short circuit accidents , prevent rust and enhance beauty.

Widening of the roads on curves in hilly region, is done (A) On the outer side (B) On the inner side (C) On the outer and inner sides equally (D) Less on outer side and more on inner side

Description : Widening of the roads on curves in hilly region, is done (A) On the outer side (B) On the inner side (C) On the outer and inner sides equally (D) Less on outer side and more on inner side

Last Answer : Answer: Option B

Earthing-up in potato is done at

Description : Earthing-up in potato is done at

Last Answer : Ans.30 – 45 DAS

Earthing up in sugarcane is done at

Description : Earthing up in sugarcane is done at

Last Answer : Ans.4 month after planting

Earthing-up is done in groundnut crop at

Description : Earthing-up is done in groundnut crop at

Last Answer : Ans.35 to 45 DAS

How many earthing should be done for motors? Why?

Description : How many earthing should be done for motors? Why? 

Last Answer : Two. For reliability.  

How main generator earthing is done?

Description : How main generator earthing is done?

Last Answer : Generator neutral earthing is done through transformer and earth fault current is limited through resistance, which is connected across the secondary of the transformer. Generator 16.5 kV earth fault current is isolated from 220 kV through GT. Only star point of the generator is grounded. 

What is the conductivity of molar ?

Description : What is the conductivity of molar ?

Last Answer : The density of a solution as cm. When one mole of electrolytic substance is dissolved in it, the conductivity obtained by multiplying it by the relative conductivity of the solution is called molecular conductivity of the solution .

How do I purchase a product ?

Description : How do I purchase a product ?

Last Answer : From Alibaba you can purchase products by paying MASTER CARD or through bank.

What is an analog signal ?

Description : What is an analog signal ?

Last Answer : Signals whose values ​​change continuously are called analog signals. For example- voltage of electricity supplied to the house.

What is Zener Diod ?

Description : What is Zener Diod ?

Last Answer : Zener diode is a special type of diode which, like ordinary diode, not only conducts current in the forward direction , but also in the opposite direction if the voltage exceeds the level of breakdown ... diode is to use the shunt regulator and the voltage reference as the voltage of the circuit.

What is the multiplying factor of shunt ?

Description : What is the multiplying factor of shunt ?

Last Answer : Answer : The ratio of load or matte current to ammeter current is called shunt multiplying power.

What is ammeter shunt ?

Description : What is ammeter shunt ?

Last Answer : A small amount of radial coupling in parallel with the coil to increase the range of ammeter is called ammeter shunt.

What is short circuit current ?

Description : What is short circuit current ?

Last Answer : Answer : A fault in an electrical system whose current, before or after the current flows through the load, is combined with one or more phases of neutral current which causes more current to flow than normal. The current is called short circuit current.

What is a current limiting reactor ? How many types and what are they ?

Description : What is a current limiting reactor ? How many types and what are they ?

Last Answer : Answer : A current limiting reactor is basically an inductive coil which limits the short circuit current by providing inductive reactance when required. Types: 1. Based on the structure- a) Dry type ... reactor. Basbar reactors are again of 2 types- a) Ring system reactor b) Tiber system reactor

What is the method of diagnosing short circuit current ?

Description : What is the method of diagnosing short circuit current ?

Last Answer : There are three methods for determining short circuit current , namely- 1) Ohmic method 2) Per unit method 3.) Percentage reactance method.

What are symmetrical and asymmetrical faults ?

Description : What are symmetrical and asymmetrical faults ?

Last Answer : Symmetrical Fault: The same amount in each phase due to the float in the electrical system. The fault that causes hot current to flow is called semantic fault. Circuit breaker ratings are determined by ... through each fan is called an asymmetrical fault. The relay is set via asymmetrical font.

What is Basbar and Bas Kaplar ?

Description : What is Basbar and Bas Kaplar ?

Last Answer : Basbar : Basbar is basically a sheet or color of copper or aluminum. It is the job of the bus driver to deliver power to one or more lads with power from one or more cables. Bus ... is basically a combination of circuit breaker and isolator. There are fire proof walls around the bus coupler.