Resistivity of electrical conductors is most affected by

by

1 Answer

Answer :

Resistivity of electrical conductors is most affected by temperature.

by

Related questions

Resistivity of conductors is most affected by (A) composition. (B) temperature. (C) pressure. (D) current.

Description : Resistivity of conductors is most affected by (A) composition. (B) temperature. (C) pressure. (D) current.

Last Answer : (B) temperature.

Materials exhibiting zero value of resistivity are known as ______ . (a) conductors (b) semiconductors (c) insulators (d) superconductors

Description : Materials exhibiting zero value of resistivity are known as ______ . (a) conductors (b) semiconductors (c) insulators (d) superconductors

Last Answer : (d) superconductors

During coal carbonisation process, the conversion of semi-coke to coke is accompanied by an increase in the __________ of the mass. (A) Density (B) Porosity (C) Electrical resistivity (D) None of these

Description : During coal carbonisation process, the conversion of semi-coke to coke is accompanied by an increase in the __________ of the mass. (A) Density (B) Porosity (C) Electrical resistivity (D) None of these

Last Answer : (A) Density

Coke used for the production of calcium carbide should have (A) Low ash content (B) Low ignition temperature (C) High electrical resistivity (D) All (A), (B) and (C)

Description : Coke used for the production of calcium carbide should have (A) Low ash content (B) Low ignition temperature (C) High electrical resistivity (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Description : Dielectric (A) Is an electrical insulating material (B) Of low resistivity is preferred (C) Should have high thermal conductivity (D) Need not defy the corrosive action of chemicals

Last Answer : (A) Is an electrical insulating material

Pick up the commonly adopted geophysical method in civil engineering from the following: (A) The seismic method (B) Electrical resistivity method (C) Gravitational method (D) Both (a) and (b) of the above

Description : Pick up the commonly adopted geophysical method in civil engineering from the following: (A) The seismic method (B) Electrical resistivity method (C) Gravitational method (D) Both (a) and (b) of the above

Last Answer : Answer: Option D

Addition of 0.3 to 4.5% silicon to iron _____ the electrical resistivity of iron.

Last Answer : Addition of 0.3 to 4.5% silicon to iron increases the electrical resistivity of iron.

Why do acids and bases make good electrical conductors when dissolved in water?

Description : Why do acids and bases make good electrical conductors when dissolved in water?

Last Answer : Acids, bases, and salts are ionically bonded and easily separate into oppositely charged free ions in water solution. Both the positive and negative ions then act as charge carriers, moving in response to an applied electric field thus facilitating electrical conductivity.

Why are metal electrical conductors?

Description : Why are metal electrical conductors?

Last Answer : atoms in a metal form a matrix wherein their outer electrons move freely

Different components of the motherboard of a PC unit are linked together by sets of parallel electrical conducting lines. What are these lines called? A) Conductors B) Buses C) Connectors D) Consecutives

Description : Different components of the motherboard of a PC unit are linked together by sets of parallel electrical conducting lines. What are these lines called? A) Conductors B) Buses C) Connectors D) Consecutives

Last Answer : Answer : B

Certain substances loose their electrical resistance completely at super low temperature. Such, substances are called. (1) Super conductors (2) Semi conductors (3) Dielectrics (4) Perfect conductors

Description : Certain substances loose their electrical resistance completely at super low temperature. Such, substances are called. (1) Super conductors (2) Semi conductors (3) Dielectrics (4) Perfect conductors

Last Answer : (1) Super conductors Explanation: Superconductors are materials that carry electrical current with little or no resistance when cooled, below a certain temperature. While conventional superconductors need to ... temperature superconductors do so above the boiling point of liquid nitrogen (-196 °C).

To minimize magnetic field interaction between electrical conductors in physical proximity, it is best to keep them ___________________. A. parallel and as close as possible to each other B. at right angles and as close as possible to each other C. parallel to and as far as practicable from each other D. at right angles and as far as practicable from each other

Description : To minimize magnetic field interaction between electrical conductors in physical proximity, it is best to keep them ___________________. A. parallel and as close as possible to each other B. at right angles ... practicable from each other D. at right angles and as far as practicable from each other

Last Answer : Answer: D

A common type of protective covering used on electrical conductors is _____________. A. plain paper B. fibrous braid C. silver sheathing D. babbitt sheathing

Description : A common type of protective covering used on electrical conductors is _____________. A. plain paper B. fibrous braid C. silver sheathing D. babbitt sheathing

Last Answer : Answer: B

Ceramic materials (A) Are exemplified by clay and mica (B) Are poor electrical conductors due to lack of free electrons (C) Never exhibit polymorphism (D) All (A), (B) and (C)

Description : Ceramic materials (A) Are exemplified by clay and mica (B) Are poor electrical conductors due to lack of free electrons (C) Never exhibit polymorphism (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Different components on the motherboard of a PC processor unit are linked together by sets or parallel electrical conducting lines. What are these lines called? a. Conductors b. Buses c. Connectors d. Connectively

Description : Different components on the motherboard of a PC processor unit are linked together by sets or parallel electrical conducting lines. What are these lines called? a. Conductors b. Buses c. Connectors d. Connectively

Last Answer : Buses

Name three electrical conductors and three electrical insulators.

Description : Name three electrical conductors and three electrical insulators.

Last Answer : Ans: conductors: metals, graphite, carbon insulators: glass, rubber, wood 

Electrical conductivities of semi-conductors are of the order of __________ ohm/cm. (A) 10-3 (B) 103 (C) 10-15 (D) 1015

Description : Electrical conductivities of semi-conductors are of the order of __________ ohm/cm. (A) 10-3 (B) 103 (C) 10-15 (D) 1015

Last Answer : OptionA

If variable part of annual cost on account of interest and depreciation on the capital outlay is equal to the annual cost of electrical energy wasted in the conductors, the total annual cost will be minimum and the corresponding size of conductor will be most economical. This statement is known as (a) Kelvin's law (b) Ohm's law (c) Kirchhoffs law (d) Faraday's law (e) none of the above

Description : If variable part of annual cost on account of interest and depreciation on the capital outlay is equal to the annual cost of electrical energy wasted in the conductors, the total annual cost will be minimum and the ... (b) Ohm's law (c) Kirchhoffs law (d) Faraday's law (e) none of the above

Last Answer : (a) Kelvin's law

Different components on the motherboard of a PC processor unit are linked together by sets or parallel electrical conducting lines. What are these lines called? a. Conductors b. Buses c. Connectors d. Connectively

Description : Different components on the motherboard of a PC processor unit are linked together by sets or parallel electrical conducting lines. What are these lines called? a. Conductors b. Buses c. Connectors d. Connectively

Last Answer : b. Buses

The covers of electrical machines are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) super conductors. (D) semiconductors.

Description : The covers of electrical machines are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) super conductors. (D) semiconductors.

Last Answer : (A) soft magnetic materials.

Materials which can store electrical energy are called (A) magnetic materials. (B) semi conductors. (C) dielectric materials. (D) super conductors.

Description : Materials which can store electrical energy are called (A) magnetic materials. (B) semi conductors. (C) dielectric materials. (D) super conductors.

Last Answer : (C) dielectric materials.

Certain substances loose their electrical resistance completely at super low temperature. Such substances are called. (1) Super conductors (2) Semi conductors (3) Dielectrics (4) Perfect conductors

Description : Certain substances loose their electrical resistance completely at super low temperature. Such substances are called. (1) Super conductors (2) Semi conductors (3) Dielectrics (4) Perfect conductors

Last Answer : Super conductors

Electrical length of an antenna is

Last Answer : Electrical length of an antenna is Greater than physical length.

Resistivity of saline at various frequencies?

Description : Resistivity of saline at various frequencies?

Last Answer : Because you are dealing with more than simple dc theory. Resistance (impedance to be more correct) of an rlc circuit changes with frequency. You will need to correct the impedance for the frequency You are using. ... It won't be perfect but it should give you an idea. That's a quick and dirty way.

What length of an alloy wire of resistivity 5.0x10^-7 Ωm and diameter 0.50mm is required to make a standard 6.0Ω resistor?

Description : What length of an alloy wire of resistivity 5.0x10^-7 Ωm and diameter 0.50mm is required to make a standard 6.0Ω resistor?

Last Answer : Interesting homework question. I’m not knowledgeable about physics, but putting myself in the shoes of someone who is.. Why don’t you post the answer that you got, and show your work, and ask us where you went wrong on the problem.

If the temperature of a semiconductor rises, what is its resistivity? -General Knowledge

Description : If the temperature of a semiconductor rises, what is its resistivity? -General Knowledge

Last Answer : The answer is 'Decrease'

If the temperature of a semiconductor rises, what is its resistivity? -General Knowledge

Description : If the temperature of a semiconductor rises, what is its resistivity? -General Knowledge

Last Answer : answer:

Resistance of a metal rod does not depend on which of the following ? 1) ... resistivity 2) density 3). Length 4), warmth ..... Explain it in a little details ?

Description : Resistance of a metal rod does not depend on which of the following ? 1) ... resistivity 2) density 3). Length 4), warmth ..... Explain it in a little details ?

Last Answer : Answer : On its density. Because it depends on how close or how far the atom must be seen.

The resistivity of indium arsenide arsenide is `rho=2.5 xx10^(-3) Omega m` and its Hall constant is `C_(H)=10^(-2) m^(3)//c`. Find the concentration a

Description : The resistivity of indium arsenide arsenide is `rho=2.5 xx10^(-3) Omega m` and its Hall constant is `C_(H)=10^(-2) m^(3)//c`. Find the concentration a

Last Answer : The resistivity of indium arsenide arsenide is `rho=2.5 xx10^(-3) Omega m` and its Hall ... and mobility of the charge carriers in this material.

Find the time of relaxation between collsion and free path of electrons in copper at room temperature. Given resistivity of copper`=1.7xx10^(-8) Omega

Description : Find the time of relaxation between collsion and free path of electrons in copper at room temperature. Given resistivity of copper`=1.7xx10^(-8) Omega

Last Answer : Find the time of relaxation between collsion and free path of electrons in copper at room temperature. Given ... electrons`=1.6xx10^(-4) ms^(-1)`

Given that resistivity of copper is `1.68xx10^(-8) Omega`m. Calculate the amount of copper required to draw a wire 10 km long having resistance of `10

Description : Given that resistivity of copper is `1.68xx10^(-8) Omega`m. Calculate the amount of copper required to draw a wire 10 km long having resistance of `10

Last Answer : Given that resistivity of copper is `1.68xx10^(-8) Omega`m. Calculate the amount of copper required to draw a ... copper is `8.9xx10^(3) kg m^(-3)`.

A rheostat has 100 turns of a wire of radius 0.4 mm having resistivity `4.2xx10^(-7) Omega`m. The diameter of each turn is 3 cm. What is the maximum v

Description : A rheostat has 100 turns of a wire of radius 0.4 mm having resistivity `4.2xx10^(-7) Omega`m. The diameter of each turn is 3 cm. What is the maximum v

Last Answer : A rheostat has 100 turns of a wire of radius 0.4 mm having resistivity `4.2xx10^(-7) ... the maximum value of resistance that it can introduce ?

A wire of resistance `10 Omega` is drawn out so that its length is thrice its original length. Calculate its new resistance (resistivity and density o

Description : A wire of resistance `10 Omega` is drawn out so that its length is thrice its original length. Calculate its new resistance (resistivity and density o

Last Answer : A wire of resistance `10 Omega` is drawn out so that its length is thrice its original ... (resistivity and density of the material remain uncharged).

Calculate the electric field in a copper wire of cross-sectional area `2.0 mm^(2)` carrying a current of 1 A. The resistivity of copper `=1.7xx10^(-8)

Description : Calculate the electric field in a copper wire of cross-sectional area `2.0 mm^(2)` carrying a current of 1 A. The resistivity of copper `=1.7xx10^(-8)

Last Answer : Calculate the electric field in a copper wire of cross-sectional area `2.0 mm^(2)` carrying a current ... of copper `=1.7xx10^(-8) Omega`m.

Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2.0mm respectively. The resistivity of the ma

Description : Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2.0mm respectively. The resistivity of the ma

Last Answer : Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2 ... the material is `2.0xx10^(-8)(Omega)m`.

Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is `15xx10^(-6) Omega` m. If a potential difference o

Description : Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is `15xx10^(-6) Omega` m. If a potential difference o

Last Answer : Calculate the resistance of a 2 m long nichrome wire of radius 0.321 mm. Resistivity of nichrome is ` ... wire, what will be the current in the wire ?

The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Description : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Last Answer : The resistance of a conductivity wire of length 1.1 m and of diameter 0.14 mm is `30 Omega`. Calculate its resistivity.

Two wires of the same dimensions but resistivities `rho_(1)` and `rho_(2)` are connected in series. The equivalent resistivity of the combination is

Description : Two wires of the same dimensions but resistivities `rho_(1)` and `rho_(2)` are connected in series. The equivalent resistivity of the combination is

Last Answer : Two wires of the same dimensions but resistivities `rho_(1)` and `rho_(2)` are connected in series. The equivalent ... (2))` D. `sqrt(rho_(1)rho_(2))`

A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V battery, the resistivity of wire is

Description : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V battery, the resistivity of wire is

Last Answer : A wire of 50 cm long, `1mm^(2)` in cross-section carries a current of 4 A, when connected to a 2 V ... `4xx10^(-6)Omega-m` D. `1xx10^(-6)Omega-m`

The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)`. If 0.2 A current is flowing throug

Description : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)`. If 0.2 A current is flowing throug

Last Answer : The resistivity of a potentiometer wire is `40xx10^(-8)Omega-m` and its area of cross section is `8xx10^(-6)m^(2)` ... . `3.2xx10^(-2)V//m` D. `1V//m`

The temperature (T) dependence of resistivity (rho) of a semiconductor is represented by :

Description : The temperature (T) dependence of resistivity (rho) of a semiconductor is represented by :

Last Answer : The temperature (T) dependence of resistivity (rho) of a semiconductor is represented by : A. B. C. D.

If the temperature of a semiconductor rises, what is its resistivity?

Description : If the temperature of a semiconductor rises, what is its resistivity?

Last Answer : – Decrease

The material used for a fuse wire should have (a) high resistivity (b) high ductility (c) high melting point (d) low melting point

Description : The material used for a fuse wire should have (a) high resistivity (b) high ductility (c) high melting point (d) low melting point

Last Answer : Ans:(d)

Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Description : Nichrome wire is used as a heating element I many appliances because (a) it can be drawn out into wires easily (b) it has high resistivity (c) it resists oxidation in air when red hot (d) both (b) and (c) are correct

Last Answer : Ans:(d)

Kilowatt-hour (KWH) is the unit of - (1) power (2) resistance (3) resistivity (4) energy

Description : Kilowatt-hour (KWH) is the unit of - (1) power (2) resistance (3) resistivity (4) energy

Last Answer : (4) energy Explanation: The kilowatt hour (symbol kWh, kW h or kW h) is a unit of energy equal to 3.6 megajoules. If the energy is being transmitted or used at a constant rate (power) over a period of time, the total energy in kilowatt hours is the power in kilowatts multiplied by the time in hours.

The resistance of a conductor is inversely proportional to its - (1) temperature (2) resistivity (3) area of cross section (4) length

Description : The resistance of a conductor is inversely proportional to its - (1) temperature (2) resistivity (3) area of cross section (4) length

Last Answer : (3) area of cross section Explanation: The resistance of a current carrying conductor is inversely proportional to the area of cross section of the conductor. This is because the resistance occurs due to the collision of electrons/charged particles.

Which of the listed conditions describes the effect on intrinsic semiconductor operation as a result of a temperature increase? A. Additional heat sinks will be required B. Conductivity will increase C. Conductivity will decrease D. Resistivity will increase

Description : Which of the listed conditions describes the effect on intrinsic semiconductor operation as a result of a temperature increase? A. Additional heat sinks will be required B. Conductivity will increase C. Conductivity will decrease D. Resistivity will increase

Last Answer : Answer: B

What determines the velocity factor in a transmission line? A. The termination impedance B. The line length C. Dielectrics in the line D. The center conductor resistivity

Description : What determines the velocity factor in a transmission line? A. The termination impedance B. The line length C. Dielectrics in the line D. The center conductor resistivity

Last Answer : C. Dielectrics in the line

What determines the velocity factor in transmission line? A. The center conductor resistivity B. Dielectrics in the line C. The termination impedance D. The line length

Description : What determines the velocity factor in transmission line? A. The center conductor resistivity B. Dielectrics in the line C. The termination impedance D. The line length

Last Answer : B. Dielectrics in the line

If the temperature of a semiconductor rises, what is its resistivity?

Description : If the temperature of a semiconductor rises, what is its resistivity?

Last Answer : Decrease