what- a ladder rests against a building at an angle as shown, with endpoints (-2,0 ) and (0,8). what is the slope of the ladder?

1 Answer

Answer :

4

Related questions

Description : what- A paved road runs down a hill as shown, with endpoints (0, 8) and (8, 0). What is the slope of the hill?

Last Answer : -1

Description : The angle of elevation of a ladder leaning against a wall is 60° and the foot of the ladder is 4.6 m away from the wall. The length of the ladder is: a) 2.3 m b) 4.6 m c) 7.8 m d) 9.2 m

Last Answer : d) 9.2 m

Description : AB has endpoint A(-8,6) and B(6,0). Find the endpoints of its image after the similarity transformation. Translation: (x,y) -> (x,y - 6) Dilation: (x,y) -> (1/2 x, 1/2 y)?

Last Answer : A(-4,0) B(3,-3)

Description : Pick up the correct statement from the following: (A) In the earth's magnetic field, a magnetic needle rests in magnetic meridian (B) The angle between the true meridian and the magnetic meridian is ... gravity tends to dip down towards the nearer magnetic pole of the earth (D) All the above

Last Answer : (D) All the above

Description : What is TRUE in regard to the preparation of occlusal rests: A. Use an inverted cone bur B. Use a flat fissure bur C. Parallel to occlusal plane D. At right angle to the long axis of tooth E. None of the above

Last Answer : E. None of the above

Description : The best way to prepare students for the transition to the next step in the educational ladder is to Options: A) Make a visit to the school building B) Receive visitors from the new school C) Prepare a booklet about the new school D) There is no best way for such orientation

Last Answer : D) There is no best way for such orientation 

Description : The moving parts of a machine which weigh 1 tonne perform vertical simple harmonic motion with an amplitude of 2.5 cm and a period of 0.5 sec. The base of the machine weighs 3 tonnes and rests on the ground. Maximum ... would be a.3.6 tonnes b.2.4 tonnes c.4.0 tonnes d.4.8 tonnes e.4.4 tonnes

Last Answer : e. 4.4 tonnes

Description : A weight of 4.9 N rests on a rough horizontal floor that has a coefficient of friction of 0.5. If g = 9.8 m/s2, the smallest horizontal force that gives the weight an acceleration of 4m/s2 is most nearly a.2.5 N b.3 N c.2 N d.4.5 N e.4.9 N

Last Answer : d. 4.5 N

Description : Find parametric equation for Y-coordinates of Hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.2u3-3u2+2u+4 b.3u3-2u2-2u-4 c.2u3-3u2-2u-4 d.2u3+3u2+2u+4

Last Answer : a.2u3-3u2+2u+4

Description : Find parametric equation for X-coordinates of hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.-5u3+8u2+u+1 b.5u3+8u2+u+1 c.8u3-5u2-u+1 d.8u3+5u2+u+1

Last Answer : a.-5u3+8u2+u+1

Description : What is the perpendicular bisector equation of the line segment whose endpoints are at -4 -10 and 8 -1 on the Cartesian plane?

Last Answer : Endpoints: (-4, -10) and (8, -1)Midpoint: (2, -5.5)Slope: 3/4Perpendicular slope: -4/3Perpendicular equation: y --5.5 = -4/3(x-2) => 3y = -4x-8.5Perpendicular bisector equation in its general form: 4x+3y+8.5 =0

Description : A ladder is inclined to a wall making an angle of 30° with it. A man is ascending the ladder at the rate of 3 m/sec. How fast is he approaching the wa

Last Answer : A ladder is inclined to a wall making an angle of 30° with it. A man is ascending the ladder at the ... 3 m/sec. How fast is he approaching the wall ?

Description : what- Mike notices the triangle shown in the design of a building near his house. What are the values of the angle measures?

Last Answer : 32, 32, and 116 degrees

Description : How would you calculate the midpoint of the horizontal segment with endpoints at (0 0) and (20 0)?

Last Answer : Points: (0, 0) and (20, 0)Midpoint: (10, 0)

Description : What’s s the midpoint of the line segment with endpoints (-5.5, -6.1) and (-0.5, 9.1)?

Last Answer : M = (-5.5+-0.5, -6.1+9.1) = -6.0, 3.0

Description : Do you feel more comfortable on a self supporting, "A" frame type of tall ladder, or one that leans against a tree, or house, for support?

Last Answer : With regular ladders I always fear that the base will slide backwards. On the other hand, A-type ladders seem awfully wobbly and prone to tipping over. I prefer permanently affixed ladders.

Description : A 2m long ladder of mass 10 kg is kept against a wall such that its base is 1.2 m away from the wall.

Last Answer : A 2m long ladder of mass 10 kg is kept against a wall such that its base is 1.2 m away ... ladder? How much is the horizontal reaction at the wall?

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of  friction will be  (A) Downwards at its upper end  (B) Upwards at its upper end  (C) Perpendicular to the wall at its upper end  (D) Zero at its upper end 

Last Answer : (D) Zero at its upper end 

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be (A) Towards the wall at its upper end (B) Away from the wall at its upper end (C) Upwards at its upper end (D) Downwards at its upper end

Last Answer : (C) Upwards at its upper end

Description : A heavy ladder resting on floor and against a vertical wall may not be in equilibrium, if (A) The floor is smooth, the wall is rough (B) The floor is rough, the wall is smooth (C) The floor and wall both are smooth surfaces (D) The floor and wall both are rough surfaces

Last Answer : (C) The floor and wall both are smooth surfaces

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Last Answer : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be zero at its upper end.

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Last Answer : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be upwards at its upper end.

Description : A heavy ladder resting on floor and against a vertical wall may not be in equilibrium, if?

Last Answer : A heavy ladder resting on floor and against a vertical wall may not be in equilibrium, if the floor and wall both are smooth surfaces.

Description : A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m

Last Answer : c. 0.8 m

Description : A crate weighing 40 kg rests on a cart moving with an acceleration W. The coefficient of friction between the cart and the crate is a.2.45 m/sec2 b.4.00 m/sec2 c.0.25 m/sec2 d.4.16 m/sec2 e.1.25 m/sec2

Last Answer : a. 2.45 m/sec2

Description : A block of mass 37 kg rests on a rough horizontal plane having coefficient of static friction 0.3.

Last Answer : A block of mass 37 kg rests on a rough horizontal plane having coefficient of static friction ... force required to just move the block horizontally.

Description : A 10 kilogram mass rests on a horizontal frictionless surface. A horizontal force of 5 Newtons is applied to the mass. After the force has been applied for 1 second, the velocity of the mass is: w) 0 meters per second x) 0.5 meters per second y) 5 meters per second z) 50 meters per second

Last Answer : ANSWER: X -- 0.5 METERS PER SECOND

Description : A point Q on a segment with endpoints A (2,-1) and C (4,2) partitions the segment in a 4:1 ratio. Find Q. You must show all work to receive credit?

Last Answer : yor mom is fat

Description : is this statement true or falseA perpendicular bisector is the set of points that are equidistant from the endpoints of the bisected segment.?

Last Answer : 1

Description : What methods could you use to calculate the x-coordinate of the midpoint of a horizontal segment with the endpoints of (-60) and (60)?

Last Answer : If you mean endpoints of (-6, 0) and (6, 0) then the midpoint isat the origin of (0, 0)

Description : What is the perpendicular bisector equation of a line segment with endpoints of p q and 7p 3q?

Last Answer : A line with slope m has a perpendicular with slope m' such that:mm' = -1→ m' = -1/mThe line segment with endpoints (p, q) and (7p, 3q) has slope:slope = change in y / change in x→ m = (3q - q)/(7p - p) = ... - 4p)→ y = -3px/q + 12p² + 2q→ qy = 12p²q + 2q² - 3pxAnother Answer: qy =-3px +12p^2 +2q^2

Description : What is the center of the circle with a diameter whose endpoints are (27) and (-6-1)?

Last Answer : Diameter endpoints: (2, 7) and (-6, -1)Centre of circle will be the midpoint which is: (-2, 3)

Description : What is the perpendicular bisector equation of a line with endpoints of s 2s and 3s 8s?

Last Answer : Endpoints: (s, 2s) and (3s, 8s)Midpoint: (2s, 5s)Slope of line: 3/1Slope of perpendicular line: -1/3Perpendicular bisector equation: y-5s = -1/3(x-2s) => 3y =-x+17sPerpendicular bisector equation in its general form: x+3y-17s =0

Description : What term is used to describe closed plane figures that intersect only at their endpoints?

Last Answer : A polygon would seem to fit the given description

Description : What is used to describe closed plane figures that intersect only at their endpoints?

Last Answer : A closed plane figure, for example, a sector of a circular orelliptical shape has no specific name.

Description : What is the perpendicular bisector equation of a line with endpoints of s 2s and 3s 8s?

Last Answer : Endpoints: (s, 2s) and (3s, 8s)Midpoint: (2s, 5s)Slope of line: 3/1Slope of perpendicular line: -1/3Perpendicular bisector equation: y-5s = -1/3(x-2s) => 3y =-x+17sPerpendicular bisector equation in its general form: x+3y-17s =0

Description : Why is the following a poor definition for a diameter. A diameter is a line segment with both endpoints on a circle.?

Last Answer : Some segments with both endpoints on a circle are not diameters.

Description : In ATM, connection between two endpoints is accomplishedthrough_______. A) TPs B) VPs C) VCs D) all of theabove

Last Answer : all of theabove

Description : Which of the following lets a Web service advertise itself in terms of a collection of endpoints? a) WSDL b) VMc c) SOAP d) All of the mentioned

Last Answer : WSDL

Description : Notation for defining REST endpoints. a) { } b) * c) All of the mentioned d) None of the mentioned

Last Answer : All of the mentioned

Description : How can you order a ladder 8.3 answers?

Last Answer : I do not know how to answer this.

Description : What is the voltage resolution of an 8-stage ladder network?  (1) Vref /128 (2) Vref /256 (3) Vref /512 (4) Vref /1024

Last Answer : Vref /256 is the voltage resolution of an 8-stage ladder network.

Description : Which of these is the point-slope equation of the line shown?

Last Answer : y+ 4= -2( x-2 )

Description : The lines shown below are parallel. If the green line has a slope of -2, what is the slope of the red line?

Last Answer : -2 (APEX)

Description : The lines shown below are perpendicular. If the green line has a slope of - 1/9, what is the slope of the red line?

Last Answer : 9 (APEX)

Description : The lines shown below are parallel. If the green line has a slope of -,1/2 what is the slope of the red line?

Last Answer : -1/2 (APEX)

Description : The lines shown below are perpendicular. If the green line has a slope of 1/7, what is the slope of the red line?

Last Answer : -7 (APEX)

Description : A body of mass 37 kg rests on a rough horizontal surface. The minimum horizontal force required to just start the motion

Last Answer : A body of mass 37 kg rests on a rough horizontal surface. The minimum horizontal force required to just start the ... ) µs = 0.188 b) µk = 0.118

Description : What refers to the idea that political power rests in hands of people?

Last Answer : Feel Free to Answer

Description : What its called When all power and authority rests with one person?

Last Answer : It is a Dictatorship, and the person in total power is a dictator.