Description : Why is the following a poor definition for a diameter. A diameter is a line segment with both endpoints on a circle.?
Last Answer : Some segments with both endpoints on a circle are not diameters.
Description : From a circular plate of diameter 6 cm is cut out a circle whose diameter is a radius of the plate. Find the e.g. of the remainder from the center of circular plate (A) 0.5 cm (B) 1.0 cm (C) 1.5 cm (D) 2.5 cm
Last Answer : (A) 0.5 cm
Description : What is the perpendicular bisector equation of the line segment whose endpoints are at -4 -10 and 8 -1 on the Cartesian plane?
Last Answer : Endpoints: (-4, -10) and (8, -1)Midpoint: (2, -5.5)Slope: 3/4Perpendicular slope: -4/3Perpendicular equation: y --5.5 = -4/3(x-2) => 3y = -4x-8.5Perpendicular bisector equation in its general form: 4x+3y+8.5 =0
Description : Area of a rectangle is equal to the area of circle whose radius is 14 cms. If the breadth of the rectangle is 22 cms. What is its length? a) 27 cms b) 28 cms c) 25 cms. d) 29 cms e) None of these
Last Answer : According to question, l×b = ¶r2 l ×22 = 22/7 ×14 × 14 l = 22/7 ×14 × 14/22 cms = 28 cms. Answer: b)
Description : What equation represents the circle whose center is (-5,3) and that passes through the point (-1,3)?
Last Answer : -40
Description : What is the area of a circle whose diameter is 10?
Last Answer : Using 3.14 as Pi the area of circle is: 78.5
Description : The coordinates of point A , where AB is the diameter of a circle whose centre is (1,3) and B is (5,4),are: (a) (-3,2) (b) (4,-9) (c) (2,-3) (d) (1/2,-2)
Last Answer : (a) (-3,2)
Description : AB has endpoint A(-8,6) and B(6,0). Find the endpoints of its image after the similarity transformation. Translation: (x,y) -> (x,y - 6) Dilation: (x,y) -> (1/2 x, 1/2 y)?
Last Answer : A(-4,0) B(3,-3)
Description : What’s s the midpoint of the line segment with endpoints (-5.5, -6.1) and (-0.5, 9.1)?
Last Answer : M = (-5.5+-0.5, -6.1+9.1) = -6.0, 3.0
Description : A hollow circular tube with a 2.3-cm I.D. and 2.5-cm O.D. is rigidly supported at its ends. A 2.5 kN-m torque is applied at the center of this tube. What is the maximum shear stress acting on this tube? (a) 2.87Mpa (b) 4.27 Mpa (c) 6.92 Mpa (d) 10.2 Mpa
Last Answer : (a) 2.87Mpa
Description : What is the radius of a wheel with a diameter of 27.6?
Last Answer : The Radius of circle is half of its diameter .27.6/2=13.8
Description : Find parametric equation for Y-coordinates of Hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.2u3-3u2+2u+4 b.3u3-2u2-2u-4 c.2u3-3u2-2u-4 d.2u3+3u2+2u+4
Last Answer : a.2u3-3u2+2u+4
Description : Find parametric equation for X-coordinates of hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.-5u3+8u2+u+1 b.5u3+8u2+u+1 c.8u3-5u2-u+1 d.8u3+5u2+u+1
Last Answer : a.-5u3+8u2+u+1
Description : A point Q on a segment with endpoints A (2,-1) and C (4,2) partitions the segment in a 4:1 ratio. Find Q. You must show all work to receive credit?
Last Answer : yor mom is fat
Description : what- a ladder rests against a building at an angle as shown, with endpoints (-2,0 ) and (0,8). what is the slope of the ladder?
Last Answer : 4
Description : what- A paved road runs down a hill as shown, with endpoints (0, 8) and (8, 0). What is the slope of the hill?
Last Answer : -1
Description : is this statement true or falseA perpendicular bisector is the set of points that are equidistant from the endpoints of the bisected segment.?
Last Answer : 1
Description : How would you calculate the midpoint of the horizontal segment with endpoints at (0 0) and (20 0)?
Last Answer : Points: (0, 0) and (20, 0)Midpoint: (10, 0)
Description : What methods could you use to calculate the x-coordinate of the midpoint of a horizontal segment with the endpoints of (-60) and (60)?
Last Answer : If you mean endpoints of (-6, 0) and (6, 0) then the midpoint isat the origin of (0, 0)
Description : What is the perpendicular bisector equation of a line segment with endpoints of p q and 7p 3q?
Last Answer : A line with slope m has a perpendicular with slope m' such that:mm' = -1→ m' = -1/mThe line segment with endpoints (p, q) and (7p, 3q) has slope:slope = change in y / change in x→ m = (3q - q)/(7p - p) = ... - 4p)→ y = -3px/q + 12p² + 2q→ qy = 12p²q + 2q² - 3pxAnother Answer: qy =-3px +12p^2 +2q^2
Description : What is the perpendicular bisector equation of a line with endpoints of s 2s and 3s 8s?
Last Answer : Endpoints: (s, 2s) and (3s, 8s)Midpoint: (2s, 5s)Slope of line: 3/1Slope of perpendicular line: -1/3Perpendicular bisector equation: y-5s = -1/3(x-2s) => 3y =-x+17sPerpendicular bisector equation in its general form: x+3y-17s =0
Description : What term is used to describe closed plane figures that intersect only at their endpoints?
Last Answer : A polygon would seem to fit the given description
Description : What is used to describe closed plane figures that intersect only at their endpoints?
Last Answer : A closed plane figure, for example, a sector of a circular orelliptical shape has no specific name.
Description : In ATM, connection between two endpoints is accomplishedthrough_______. A) TPs B) VPs C) VCs D) all of theabove
Last Answer : all of theabove
Description : Which of the following lets a Web service advertise itself in terms of a collection of endpoints? a) WSDL b) VMc c) SOAP d) All of the mentioned
Last Answer : WSDL
Description : Notation for defining REST endpoints. a) { } b) * c) All of the mentioned d) None of the mentioned
Last Answer : All of the mentioned
Description : A circle is passing through two end points A[6,4] and B[10,10]. Find center point ofcircle a.7,8 b.8,8 c.8,7 d.7,7
Last Answer : c.8,7
Description : A circle is represented by center point [5,5] and radius 6 units. Find the parametricequation of circle and determine the various points on circle in first quadrant if increment in angle by 45o a.9.24,9.24 b.9.42,9.42 c.9,9 d.11,5
Last Answer : a.9.24,9.24
Description : What is the equation for a circle with a center of (-1 -5) and a radius of 6?
Last Answer : The equation is: (x+1)^2 +(y+5)^2 = 36
Description : Draw a circle of diameter 6.4 cm. Then draw two tangents to the circle from a point P at a distance 6.4 cm from the centre of the circle. -Maths 9th
Last Answer : clear .
Description : Find total number coils in a spring having square and ground ends. Deflection in the spring is 6mm when load of 1100N is applied. Modulus of rigidity is 81370N/mm². Wire diameter and pitch circle diameter are 10mm and 50mm respectively. a) 7 b) 6 c) 5 d) 4
Last Answer : a) 7
Description : A circular pipe is subjected to maximum shear force of 60 kN. What is the diameter of the pipe if maximum allowable shear stress is 5 Mpa? a. 27.311 mm b. 75.56 mm c. 142.72 mm d. 692.10 mm
Last Answer : c. 142.72 mm
Description : Center point of circle a.[x1+x2]/2; [y1+y2]/2; [z1+z2]/2 b.[x1-x2]/2; [y1-y2]/2; [z1-z2]/2 c.[x1-x2]; [y1-y2]; [z1-z2] d.[x2-x1]; [y2-y1]; [z2-z1]
Last Answer : a.[x1+x2]/2; [y1+y2]/2; [z1+z2]/2
Description : To change the position of a circle or ellipse we translate a.Center coordinates b.Center coordinates and redraw the figure in new location c.Outline coordinates d.All of the mentioned
Last Answer : b.Center coordinates and redraw the figure in new location
Description : what- a new high- rise building has a koi pond in the center of a triangle lounge area. the pond is the largest circle that will fit inside the trianglewhich correctly names point H?
Last Answer : the incenter of EFG
Description : Is this statement true or falseThe circumcenter of a triangle is the center of its circumscribed circle?
Description : Definition of center and circle angles ?
Last Answer : center angle: When the vertex of an angle is located in the center of a circle , the angle is called a center angle of that circle. Circular angle: If the vertex of an angle is a point in a ... the circle in addition to the vertex on each side of the angle, the angle is called a circular angle.
Description : What is the center and radius of a circle ?
Last Answer : The fixed point is called the center of the circle. The distance of any point of the circle from the center of the circle is called the radius of that circle.
Description : What is the equation for a circle with a center of (0 0) and a radius of 9?
Last Answer : The equation of the circle is: x^2 + y^2 = 81
Description : What is the equation of the circle with center at (3 2) and through the point (5 4).?
Last Answer : Equation of circle: (x-3)^2 +(y-2)^2 = 8
Description : What is a chord of the circle that contains the center of a circle called?
Last Answer : Feel Free to Answer
Description : What is the center and the radius of the circle x2 plus y2 -4x -6y -3 equals 0?
Last Answer : Equation of circle: x^2 +y^2 -4x -6y -3 = 0Completing the squares: (x-2)^2 +(y-3)^2 = 16 square unitsTherefore center of circle is at (2, 3) and its radius is 4units
Description : What is the center and the radius of the circle x2 plus y2 equals 12x -10y -12?
Last Answer : Equation of circle: x^2 +y^2 = 12x-10y-12Completing the squares: (x-6)^2 +(y+5)^2 = 49So center of circle is at (6, -5) and its radius is 7 units
Description : What is the distance from the center to edge of a circle?
Last Answer : It is the radius of the circle
Description : Is the shortest distance from the center of the inscribed circle to the triangle sides is the circles?
Last Answer : It is its inradius.
Description : What is a force that pulls outward from the center of a circle?
Last Answer : This might be the description of centrifugal force.
Description : An object moving in a circle of radius ‘r’ with a constant speed ‘v’ has a constant acceleration towards the center equal to A. v²⁄r B. v⁄r C. v²×r D. v×r
Last Answer : v²⁄r
Description : Centripetal force is directed towards the A. tangent to circle B. center C. normal to circle D. parallel to circl
Last Answer : center
Description : In order to keep a body moving in a circle, there exists a force on it that is directed toward the center of the circle. This force is known asA. Centrifugal force B. Centripetal force C. Gravitational Force D. magnetic force
Last Answer : Centripetal force