Write five advantages and five disadvantages of embodiment.

Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA. 
by

1 Answer

Answer :

Five advantages: 

1. Smaller Size 

2. Smaller Weight 

3. Lower Power Consumption 

4. Lower Electromagnetic Interference 

5. Lower Price 

Five disadvantages 

1. Lower Mean Time Between Failure 

2. Repair and Maintenance is not possible 

3. Faster Obsolesce 

4. Unmanageable Heat Loss 

5. Difficult to Design 

Version 2 EE IIT, Kharagpur
by

Related questions

State four advantages of embedded system.

Description : State four advantages of embedded system. 

Last Answer : 1) Design and Efficiency 2) Cost 3) Accessibility 4) Maintenance 5) Redundancies

It is desired to connect five computers that are joined at a single point called central node. i) Draw the setup. ii) Name the topology. iii) State two advantages and disadvantages of this topology.

Description : It is desired to connect five computers that are joined at a single point called central node. i) Draw the setup. ii) Name the topology. iii) State two advantages and disadvantages of this topology.

Last Answer : i. Setup:  ii. Name of topology: Star topology iii. Advantages of Star Topology 1) As compared to Bus topology it gives far much better performance, signals don't necessarily get ... as well number of nodes which can be added in such topology is depended on capacity of central device.

Who is the embodiment of democracy ?

Description : Who is the embodiment of democracy ?

Last Answer : Jean-Jacques Rousseau is the epitome of democracy.

Who is the embodiment of national symbol of Bangladesh ?

Last Answer : Kamrul Hasan', the embodiment of national symbol of Bangladesh

What is Weak AI? a) the embodiment of human intellectual capabilities within a computer b) a set of computer programs that produce output that would be considered to reflect intelligence if it were generated by humans c) the study of mental faculties using mental models implemented on a computer d) all of the mentioned

Description : What is Weak AI? a) the embodiment of human intellectual capabilities within a computer b) a set of computer programs that produce output that would be considered to reflect intelligence if it ... the study of mental faculties using mental models implemented on a computer d) all of the mentioned

Last Answer : c) the study of mental faculties using mental models implemented on a computer

Strong Artificial Intelligence is __________ a) the embodiment of human intellectual capabilities within a computer b) a set of computer programs that produce output that would be considered to reflect intelligence if it were generated by humans c) the study of mental faculties through the use of mental models implemented on a computer d) all of the mentioned

Description : Strong Artificial Intelligence is __________ a) the embodiment of human intellectual capabilities within a computer b) a set of computer programs that produce output that would be considered to reflect ... through the use of mental models implemented on a computer d) all of the mentioned

Last Answer : a) the embodiment of human intellectual capabilities within a computer

Weak AI is a. the embodiment of human intellectual capabilities within a computer. b. a set of computer programs that produce output that would be considered to reflect intelligence if it were generated by humans. c. the study of mental faculties through the use of mental models implemented on a computer. d. All of the above

Description : Weak AI is a. the embodiment of human intellectual capabilities within a computer. b. a set of computer programs that produce output that would be considered to reflect intelligence if it were ... faculties through the use of mental models implemented on a computer. d. All of the above

Last Answer : c. the study of mental faculties through the use of mental models implemented on a computer

Weak AI is ⮚ a set of computer programs that produce output that would be considered to reflect intelligence if it were generated by humans. ⮚ the study of mental faculties through the use of mental models implemented on a computer. ⮚ the embodiment of human intellectual capabilities within a computer. ⮚ All of the above

Description : Weak AI is ⮚ a set of computer programs that produce output that would be considered to reflect intelligence if it were generated by humans. ⮚ the study of mental faculties through the use ... a computer. ⮚ the embodiment of human intellectual capabilities within a computer. ⮚ All of the above

Last Answer : ⮚ the study of mental faculties through the use of mental models implemented on a computer.

Artificial intelligence is___________ A. The embodiment of human intellectual capabilities within a computer. B. A set of computer programs that produce output that would be considered to reflect intelligence if it were generated by humans. C. The study of mental faculties through the use of mental models implemented on a computer D. All of the above E. None of the above

Description : Artificial intelligence is___________ A. The embodiment of human intellectual capabilities within a computer. B. A set of computer programs that produce output that would be considered to reflect intelligence if it were ... models implemented on a computer D. All of the above E. None of the above

Last Answer : D. All of the above 

Strong AI is__________ A. The embodiment of human intellectual capabilities within a computer. B. A set of computer programs that produce output that would be considered to reflect intelligence if it were generated by humans. C. The study of mental faculties through the use of mental models implemented on a computer D. All of the above E. None of the above

Description : Strong AI is__________ A. The embodiment of human intellectual capabilities within a computer. B. A set of computer programs that produce output that would be considered to reflect intelligence if it were generated ... mental models implemented on a computer D. All of the above E. None of the above

Last Answer : A. The embodiment of human intellectual capabilities within a computer. 

Weak AI is____________ A. The embodiment of human intellectual capabilities within a computer. B. A set of computer programs that produce output that would be considered to reflect intelligence if it were generated by humans. C. The study of mental faculties through the use of mental models implemented on a computer D. All of the above E. None of the above

Description : Weak AI is____________ A. The embodiment of human intellectual capabilities within a computer. B. A set of computer programs that produce output that would be considered to reflect intelligence if it were generated ... mental models implemented on a computer D. All of the above E. None of the above

Last Answer : C. The study of mental faculties through the use of mental models implemented on a computer 

Write a C language program to operate port 0 and port 2 as output port and port 1 and port 3 as input port.

Description : Write a C language program to operate port 0 and port 2 as output port and port 1 and port 3 as input port.

Last Answer : #include void main (void ) { unsigned char X,Y P0=0X00; // P0 as output port P2=0X00;// P2 as output port P1=0XFF;//P1 as input port P3=0XFF;// P3 as input port while(1) { X= P1; Y=P3; P0=X; P2=Y; }//end of while }//end of main

Write the model number and detailed specification of your/friend’s mobile telephone.

Description : Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA. 

Last Answer : Manufacturer  Model:  Network Types:  EGSM/ GSM /CDMA  Form Factor: The industry standard that defines the physical, external dimensions of a particular device. The size, configuration, and other specifications used ...   Speaker  Phone:  USB:  Vibrate: Version 2 EE IIT, Kharagpur

Write down the advantages and disadvantages of vegetative propagation in plants?

Description : Write down the advantages and disadvantages of vegetative propagation in plants?

Last Answer : Advantages: - i) Young plant uses the food resources from parent plant during development. ii) Only one parent plant is involved. iii) Good and desired characters are transmitted to ... and environment. iv) Colonization is unlikely. Thus plants are not widely distributed. 

Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Description : Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Last Answer : Economical. Available in variety of sizes and shapes.  Chemically inert, impermeable, strong and rigid. Does not deteriorate with age. Easy to label. Excellent barrier against light. ... easy to break. Heavy, Bulky to carry. Leaching and absorption of alkalis. Flak formation

Write advantages and disadvantages of plastic as a material for container and state its type.

Description : Write advantages and disadvantages of plastic as a material for container and state its type.

Last Answer : Advantages: 1. Light in weight and can be handled easily. 2. Poor conductor of heat. 3. Sufficient mechanical strength. 4. Transported easily. 5. Unbreakable. 6. Available in various shapes ... (PVC) Low-density polyethylene (LDPE) Polypropylene (PP) Polystyrene (PS) Polyester (PES) etc.

Write the advantages & disadvantages of an evaporating pan

Description : Write the advantages & disadvantages of an evaporating pan

Last Answer : Advantages:   It is simple and cheap to construction.   Easy to clean and maintain.   Economical.  Disadvantages:   Poor coefficient of heat transfer.   Heating surface is ... concentration of thermolabile material.   Evaporating pan is open so vapour cause discomfort to the worker.

Write advantages and disadvantages of tablets.

Description : Write advantages and disadvantages of tablets.

Last Answer : Advantages of tablets: 1. Easy to administered. 2. Easy to dispense. 3. More stable. 4. Accuracy in dose. 5. Bitter and nauseous substance can be easily dispensed. 6. ... remove bitter and unpleasant taste. v) Swallowing is difficult especially for children and ill (unconscious) patients.

Write the advantages and disadvantages of fluidised bed dryer.

Description : Write the advantages and disadvantages of fluidised bed dryer. 

Last Answer : Advantages: i. It give high drying rate. ii. Suitable for thermolabile material. iii. Drying takes place of individual particles. iv. Temperature can be controlled. v. Prevent the ... : i. Turbulence produces cause attrition of particles. ii. Movement can generate electrical charges. 

Write any two advantages and disadvantages of NIS. (Network Information Service)

Description : Write any two advantages and disadvantages of NIS. (Network Information Service)

Last Answer : Advantages: 1. Allows multiple computers to use the same files, so everyone on the network can access the same data 2. Reduces storage costs by having computers share applications instead of ... the network in clear text and can be easily captured and cracked, making client systems vulnerable.

State two advantages and disadvantages of centrifugal casting. Write four applications.

Description : State two advantages and disadvantages of centrifugal casting. Write four applications.

Last Answer : Centrifugal Casting: Advantages: 1. Relatively very light impurities move inwards towards center. So they can be removed easily thus helping in producing sound castings. 2. Gates and risers are not needed. ... making rollers. 4. Piston rings. 5. Cylinder liners. 6. Pipes of water gas sewage.

Write two advantages and two disadvantages of vacuum dewatered concrete floor.

Description : Write two advantages and two disadvantages of vacuum dewatered concrete floor.

Last Answer : Advantages of vacuum de-watered concrete floor: i. It reduces the time for finishing the floor. ii. Smooth and clean finish surface. iii. It reduce permeability and increase durability of concrete floor ... . iv. Joint can also weaken the concrete. v. Abrasion can cause dust and cleanliness problem.

Write two advantages and two disadvantages of friction.

Description : Write two advantages and two disadvantages of friction.

Last Answer : They change the direction  of the objects  They change the size of the objects

Describe the resistive method for liquid level measurement. Write its advantages and disadvantages.

Description : Describe the resistive method for liquid level measurement. Write its advantages and disadvantages.

Last Answer : Working: This method uses mercury as a conductor as shown in the figure. A number of contact rods are placed at various liquid levels. As the level of liquid rises in the tank, head h ... connected in series is calibrated in terms of the liquid level and indicates the liquid level directly. 

Write any four advantages and four disadvantages of thermal power plant.

Description : Write any four advantages and four disadvantages of thermal power plant.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Write advantages and disadvantages of positive and negative feedback.

Description : Write advantages and disadvantages of positive and negative feedback.

Last Answer : Advantages of Positive Feedback: i) Voltage gain increases. ii) No phase shift is provided. iii) Feedback signal and input signal are in phase. iv) Input and Output voltage increases.  ... ii) Feedback signal and input signal are out of phase. iii) Input and Output voltage decreases.

Explain how a Programmable Logic Controller (PLC) is different from an ordinary personal computer. Also write the advantages and disadvantages of PLC.

Description : Explain how a Programmable Logic Controller (PLC) is different from an ordinary personal computer. Also write the advantages and disadvantages of PLC.

Last Answer : PLC PC 1 It has embedded processor with limited computing power It has a CPU with high computing power  2 Design of PLC is for reliable operation in industrial ... 3) Use of PLCs may be restricted in some high heat, vibration environment not suitable for electronic circuit

Explain the term ‘Deadlock’. State reason of occurance.

Description : Explain the term ‘Deadlock’. State reason of occurance.

Last Answer : A deadlock is a situation where in two or more competing actions are each waiting for the other to finish, and thus neither ever does.  * Assume thread/process T1 has exclusive access to resource R1. ... P1 to Pn P1 waiting for the resource held by P2, P2 waiting for resource held by P3 etc.

Explain the need to consider following factors in design matrix of embedded system: (i) Processor (ii) Memory (iii) Power (iv) Non- recurring engineering cost.

Description : Explain the need to consider following factors in design matrix of embedded system: (i) Processor (ii) Memory (iii) Power (iv) Non- recurring engineering cost.

Last Answer : 1. Processor: Selection of processor depends upon amount of processing power and the register width required. Powerful 8bit, 16 bit, 32 bit & 64bit processors are available. The clock speed ... system is designed any number of units can be manufactured without incurring any additional design cost.

Compare synchronous and asynchronous communication.

Description : Compare synchronous and asynchronous communication.

Last Answer : Synchronous communication Asynchronous communication Single clock is used for both transmitter and receiver Two different clocks are used for both transmitter and receiver Data bits are transmitted ... Character is received at a any rate Less reliable More reliable

Compare features of PIC and AVR microcontrollers

Description : Compare features of PIC and AVR microcontrollers

Last Answer : Parameters PIC AVR Bus width 8/16/32-bit 8/32-bit Communication Protocols UART, USART, LIN, CAN, Ethernet, SPI, I2C UART, USART, SPI, I2C, (special ... Average Atmel Popular Microcontrollers PIC18fXX8, PIC16f88X, PIC32MXX Atmega8, 16, 32, Arduino Community

Sketch pin-out diagram of LM35 and label its pin.

Description : Sketch pin-out diagram of LM35 and label its pin.

Last Answer :  pin-out diagram of LM35 and label its pin

Develop a ‘C’ program to transfer the data from port P0 to port P1.

Description : Develop a ‘C’ program to transfer the data from port P0 to port P1.

Last Answer : #include void main (void ) { unsigned char X; P0=0XFF; // P0 as input port P1=0X00;//P1 as output port while(1) //do forever { X = P0;//read port0 P1 = X;// output data to port1 }

State two examples of RTOS.

Description : State two examples of RTOS.

Last Answer : 1. LynxOS. 2. OSE. 3. QNX. 4. RTLinux. 5. VxWorks. 6. Windows CE.

State the use of MAX 232 in communication.

Description : State the use of MAX 232 in communication.

Last Answer : MAX 232 is line driver that converts from RS232 voltage levels to TTL voltage levels & vice versa in serial communication 

List out four types of embedded systems.

Description : List out four types of embedded systems.

Last Answer : 1. Small Scale Embedded Systems 2. Medium Scale Embedded Systems 3. Sophisticated Embedded Systems 4. Stand Alone Embedded Systems 5. Real Time Embedded Systems 6. Networked Embedded Systems 7. Mobile Embedded Systems

State the methods of task synchronization. Describe semaphore with suitable example.

Description : State the methods of task synchronization. Describe semaphore with suitable example.

Last Answer : The methods of task synchronization are: Semaphore Message queue. Mutual exclusion.  Dead lock. Mailboxes. Message Queues. Semaphores: It is a system of sending message by using flags. Multiple concurrent threads of execution ...   signal(Sem);  }  in process P2  {  wait(Sem);  S2;  }

Draw the block diagram of an embedded system and describe the hardware units of an embedded system.

Description : Draw the block diagram of an embedded system and describe the hardware units of an embedded system.

Last Answer : OR Explanation: The embedded system consist of different components embedded into it as follows: 1) Embedded Processor 2) Power supply , reset and Oscillator circuits 3) System timers 4) ... to store data and program. Following are types of memories used in embedded system.

Draw the labeled interfacing diagram to interface relay with 89C51 microcontroller.

Description : Draw the labeled interfacing diagram to interface relay with 89C51 microcontroller.

Last Answer : the labeled interfacing diagram to interface relay with 89C51 microcontroller

State four features of Zigbee.

Description : State four features of Zigbee.

Last Answer : Zigbee features (any4):- IEEE Standard 802.15.4 Frequency (GHz) 0.868, 0.915, 2.4 Maximum bit rate (Mbps) 0.250 or 250 Kbps, low bit rate Typical data throughput (Mbps) 0.2 ... Range (Meters) 10-100 Relative Power Consumption Very low Battery Life Months to years Network Size 64,000+ 

State any four features of IDE.

Description : State any four features of IDE.

Last Answer : Features of IDE 1) IDE normally consists of source code editor, a compiler, build automation tools and debugger. 2) It supports for defining a processor family and its version. 3) ... 4) Provides multiuser environment. 5) Supports conditional and unconditional break points. 6) Provides debugger.

What is multicore processor? Describe in brief.

Description : What is multicore processor? Describe in brief.

Last Answer : Multicore Processor: It is an integrated circuit in which two or more processors core have been packaged for enhanced performance, reduced power consumption and more efficient simultaneous ... Multicore processors will give the benefits to all software especially for multithreaded program.

Elaborate on the time-to-market design metric.

Description : Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA.

Last Answer : The time required to develop a system to the point that it can be released and sold to customers. The main contributors are design time, manufacturing time, and testing time. This metric has become ... early can make a big difference in the system's profitability. Version 2 EE IIT, Kharagpur

Discuss about the Hard Disk Drive housed in your PC. Is it an RTES?

Description : Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA.

Last Answer : Hard drives have two kinds of components: internal and external. External components are located on a printed circuit board called logic board while internal components are located in a sealed chamber called HDA or Hard ... that a Hard Disk Drive is an RTES.  Version 2 EE IIT, Kharagpur 

The Performance Design Metric

Description : Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA.

Last Answer : The Performance Design Metric Performance of a system is a measure of how long the system takes to execute our desired tasks. The two main measures of performance are:  Latency or ... the available processors rather than going for a custom design.  Version 2 EE IIT, Kharagpur 

Design Metrics

Description : Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA.

Last Answer : Design Metrics  A Design Metric is a measurable feature of the system's performance, cost, time for implementation and safety etc. Most of these are conflicting requirements i.e. optimizing one ... test circuitry to check that manufacturing was correct.  Version 2 EE IIT, Kharagpur

Components of an Embedded System

Description : Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA.

Last Answer : Components of an Embedded System   By this time we know where are our Embedded Systems and what makes them stand out from other systems like Calculators, Desktop Computers, and our Old Television ... account the technical as well as economic considerations.  Version 2 EE IIT, Kharagpur

Lesson 2 Introduction to Real Time Embedded Systems Part II

Description : Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA.

Last Answer : Structure and Design Instructional Objectives  After going through this lesson the student will  Learn more about the numerous day-to-day real time embedded systems  Learn the ... data such as phone numbers, calendars information, games etc.  Version 2 EE IIT, Kharagpur

What do you mean by Reactive in Real Time. Cite an example.

Description : Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA. 

Last Answer : Many embedded systems must continually react to changes in the system's environment and must compute certain results in real time without delay. For example, a car's cruise controller continually monitors and ... user, typically does not result in a system failure.  Version 2 EE IIT, Kharagpur

Which of the following is a real time embedded system? Justify your answer

Description : Which of the following is a real time embedded system? Justify your answer (a) Ceiling Fan (b) Microwave Oven (c) Television Set (d) Desktop Key Board (e) Digital Camera Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA. 

Last Answer : (b) and (e) are embedded systems  (a) Ceiling Fans: These are not programmable.  (b) & (e) obey all definitions of Embedded Systems such as (i) Working in Real Time (ii) Programmable ... mass-produced, so the cost savings may be multiplied by millions of items.  Version 2 EE IIT, Kharagpur