Write two advantages and two disadvantages of friction.

Write two advantages and two disadvantages of friction.
by
retagged

2 Answers

Answer :

Advantages of friction: 1) One can walk easily on rough surface than smooth surface. 2) Moving vehicle on road can be stopped suddenly by applying brakes. 3) One can hammer nail into wall. 4) One can easily hold pen, pencil and can write on paper.

Disadvantages of friction: 1) Energy is lost due to friction. 2) It causes wear and tear in machine parts. 3) More effort is required to lift any load on a machine. 4) There is more consumption of fuel due to friction.
by

Answer :

They change the direction  of the objects 

They change the size of the objects
by

Related questions

________ is a substance that can reduce the force of friction between the two surface in contact. a) lubricant b)paste c)water d)push

Description : ________ is a substance that can reduce the force of friction between the two surface in contact. a) lubricant b)paste c)water d)push

Last Answer : a) lubricant

What is Friction?

Description : What is Friction? 

Last Answer : Friction is the force that opposes the relative motion or tendency to such motion of two bodies in contact. If we try to push a block of wood across a table, there are two opposing forces ... table) the object moves further and further before stopping. This demonstrates Galileo's law of inertia too.

We often sprinkle talcum powder on the carom board . This is done to reduce ______ between the board and the striker. a) friction b)movement c)speed d)contact

Description : We often sprinkle talcum powder on the carom board . This is done to reduce ______ between the board and the striker. a) friction b)movement c)speed d)contact

Last Answer : a) friction

A ball bearing is used in shafts of motors, dynamos to reduce ______. a) movement b)friction c)speed d)none

Description : A ball bearing is used in shafts of motors, dynamos to reduce ______. a) movement b)friction c)speed d)none

Last Answer : b)friction

The skidding of vehicle on snow is because of very little _______. a) pull b)friction c)push d)none

Description : The skidding of vehicle on snow is because of very little _______. a) pull b)friction c)push d)none

Last Answer : b)friction

Describe with neat diagram air friction damping.

Description : Describe with neat diagram air friction damping. 

Last Answer : Air Friction Damping: Here air trapped in the chamber works as damping medium for the piston movement connected to the spindle. The piston moves in the air chamber. The clearance between piston and ... will be the damping torque, bringing the pointer to the equilibrium position quickly. 

The friction losses in Real Transformers are :

Description : The friction losses in Real Transformers are :  (A) 0% (B) 5% (C) 25% (D) 50%

Last Answer : A

Kinetic friction is the?

Description : Kinetic friction is the?

Last Answer : Kinetic friction is the friction force acting when the body is in motion.

Tangent of angle of friction is equal to?

Description : Tangent of angle of friction is equal to?

Last Answer : Tangent of angle of friction is equal to coefficient of friction.

Dynamic friction as compared to static friction is?

Description : Dynamic friction as compared to static friction is?

Last Answer : Dynamic  friction  is   less  compared  to  static  friction.

Coulomb friction is the friction between?

Description : Coulomb friction is the friction between?

Last Answer : Coulomb friction is the friction between bodies having relative motion.

Limiting force of friction is the?

Description : Limiting force of friction is the?

Last Answer : Limiting force of friction is the friction force acting when the body is just about to move.

Coefficient of friction is the?

Description : Coefficient of friction is the?

Last Answer : Coefficient of friction is the ratio of limiting friction and normal reaction.

On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Description : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be?

Last Answer : On the ladder resting on the ground and leaning against a smooth vertical wall, the force of friction will be zero at its upper end.

On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Description : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be?

Last Answer : On a ladder resting on smooth ground and leaning against vertical wall, the force of friction will be upwards at its upper end.

The ratio of limiting friction and normal reaction is known as?

Description : The ratio of limiting friction and normal reaction is known as?

Last Answer : The ratio of limiting friction and normal reaction is known as coefficient of friction.

The coefficient of friction depends on?

Description : The coefficient of friction depends on?

Last Answer : The coefficient of friction depends on nature of surface.

Angle of friction is the?

Description : Angle of friction is the?

Last Answer : Angle of friction is the angle between normal reaction and the resultant of normal reaction and the limiting friction.

The normal value of adhesion friction is?

Last Answer : The normal value of adhesion friction is 0.25.

The friction at the track is proportional to?

Last Answer : The friction at the track is proportional to speed.

Air resistance ______ with an increase in the speed of the object moving through it. a) increases b)decreases c)remains same d)no change

Description : Air resistance ______ with an increase in the speed of the object moving through it. a) increases b)decreases c)remains same d)no change

Last Answer : a) increases

Liquid pressure at any point inside the liquid, depends upon _______of the liquid and the height of liquid column above that point. a) area b)density c)weight d)none

Description : Liquid pressure at any point inside the liquid, depends upon _______of the liquid and the height of liquid column above that point. a) area b)density c)weight d)none

Last Answer : b)density

State four laws of static friction.

Description : State four laws of static friction. 

Last Answer : 1. The frictional force is always acts tangential to the plane of contact and in the opposite direction of motion. 2. When the body is in limiting equilibrium, the ratio of limiting friction to ... is a self-adjusting force and it increases as the applied force increases up to limiting friction. 

Write relation between resultant and equilibrant.

Description : Write relation between resultant and equilibrant.

Last Answer : Equilibrant is always equal in magnitude, opposite in direction and collinear to the resultant.

State two limitations of Lami’s theorem.

Description : State two limitations of Lami’s theorem.

Last Answer : 1. The theorem is applicable only if the body is in equilibrium. 2. The theorem is not applicable for parallel or non-concurrent force system. 3. The theorem is not applicable for more or less than three concurrent forces. 4. The theorem is not applicable for non-coplanar forces. 

State law of machine and explain its significance.

Description : State law of machine and explain its significance.

Last Answer : When we are using a machine to lift a weight, the work done is governed by the Law of Machine, which states that when on a machine (p) an effort is applied It has to be equal to the weight (w) of the load it will be lifting. Hence, p = mw + c where m and c are positive constants of the machine.

Define force system. Explain three force systems with sketches.

Description : Define force system. Explain three force systems with sketches. 

Last Answer : When two or more forces acting on a body, they are said to form a system of forces or force system.  Force systems with sketches: 1. Coplanar Collinear force system: The force system in ... planes and they do not possess one single point of concurrency are known as General force system.

Define free body diagram

Description : Define free body diagram

Last Answer : When all active and reactive forces acting on the free body are shown and thus the diagram obtained is called as „free body diagram‟. 

State Law of polygon of forces.

Description : State Law of polygon of forces.

Last Answer : This law states that, If number of coplanar concurrent forces acting simultaneously on a body, be represented in magnitude and direction by the sides of polygon taken in same order, then their ... of the resultant. Measure angle , which gives the direction of resultant with the horizontal. 

Define Scalar and Vector quantity.

Description : Define Scalar and Vector quantity. 

Last Answer : Scalar Quantity: A physical quantity having only magnitude but no direction is called as scalar quantity Vector Quantity: A physical quantity having both magnitude as well as direction is called as vector quantity. 

Define force and state its effects.

Description : Define force and state its effects.

Last Answer : Force: It is an external agency either push or pull which changes or tends to change the state of rest or of uniform motion of a body, upon which it acts. Effects of force : i) It may change the state ... It may turn or rotate the body on which it acts. iv) It may deform the body on which it acts.

Define centroid and centre of gravity.

Description : Define centroid and centre of gravity.

Last Answer : Centroid: It is defined as the point through which the entire area of a plane figure is assumed to act, for all positions of the lamina. e. g. Triangle, Square.  Centre of Gravity: It is defined as ... of the body is assumed to act, irrespective of the position of a body. e.g. Cone, Cylinder.

State characteristics of force.

Description : State characteristics of force.

Last Answer : i) Magnitude: The quantity of force e.g. 10 N, 100 kN etc.  ii) Direction: It is the line along which the force acts. It is also called as line of action of the force.  iii) Point of ... .  Push: If the arrow head is pointed towards the point of application, the nature of the force is push.

Explain the disadvantages of friction ?

Description : Explain the disadvantages of friction ?

Last Answer : Vehicles cannot move easily due to excessive friction. As a result of friction between the moving parts of the machinery, they are eroded and torn. Any type of vehicle has to spend extra fuel ... converted into heat. This causes the engine parts to overheat which can cause the engine to malfunction.

State disadvantages of friction.

Description : State disadvantages of friction.

Last Answer : State disadvantages of friction.

Write any two advantages and disadvantages of NIS. (Network Information Service)

Description : Write any two advantages and disadvantages of NIS. (Network Information Service)

Last Answer : Advantages: 1. Allows multiple computers to use the same files, so everyone on the network can access the same data 2. Reduces storage costs by having computers share applications instead of ... the network in clear text and can be easily captured and cracked, making client systems vulnerable.

State two advantages and disadvantages of centrifugal casting. Write four applications.

Description : State two advantages and disadvantages of centrifugal casting. Write four applications.

Last Answer : Centrifugal Casting: Advantages: 1. Relatively very light impurities move inwards towards center. So they can be removed easily thus helping in producing sound castings. 2. Gates and risers are not needed. ... making rollers. 4. Piston rings. 5. Cylinder liners. 6. Pipes of water gas sewage.

Write two advantages and two disadvantages of vacuum dewatered concrete floor.

Description : Write two advantages and two disadvantages of vacuum dewatered concrete floor.

Last Answer : Advantages of vacuum de-watered concrete floor: i. It reduces the time for finishing the floor. ii. Smooth and clean finish surface. iii. It reduce permeability and increase durability of concrete floor ... . iv. Joint can also weaken the concrete. v. Abrasion can cause dust and cleanliness problem.

Write down the advantages and disadvantages of vegetative propagation in plants?

Description : Write down the advantages and disadvantages of vegetative propagation in plants?

Last Answer : Advantages: - i) Young plant uses the food resources from parent plant during development. ii) Only one parent plant is involved. iii) Good and desired characters are transmitted to ... and environment. iv) Colonization is unlikely. Thus plants are not widely distributed. 

Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Description : Write the advantages and disadvantages of glass as a material for packaging. Merits of Glass container

Last Answer : Economical. Available in variety of sizes and shapes.  Chemically inert, impermeable, strong and rigid. Does not deteriorate with age. Easy to label. Excellent barrier against light. ... easy to break. Heavy, Bulky to carry. Leaching and absorption of alkalis. Flak formation

Write advantages and disadvantages of plastic as a material for container and state its type.

Description : Write advantages and disadvantages of plastic as a material for container and state its type.

Last Answer : Advantages: 1. Light in weight and can be handled easily. 2. Poor conductor of heat. 3. Sufficient mechanical strength. 4. Transported easily. 5. Unbreakable. 6. Available in various shapes ... (PVC) Low-density polyethylene (LDPE) Polypropylene (PP) Polystyrene (PS) Polyester (PES) etc.

Write the advantages & disadvantages of an evaporating pan

Description : Write the advantages & disadvantages of an evaporating pan

Last Answer : Advantages:   It is simple and cheap to construction.   Easy to clean and maintain.   Economical.  Disadvantages:   Poor coefficient of heat transfer.   Heating surface is ... concentration of thermolabile material.   Evaporating pan is open so vapour cause discomfort to the worker.

Write advantages and disadvantages of tablets.

Description : Write advantages and disadvantages of tablets.

Last Answer : Advantages of tablets: 1. Easy to administered. 2. Easy to dispense. 3. More stable. 4. Accuracy in dose. 5. Bitter and nauseous substance can be easily dispensed. 6. ... remove bitter and unpleasant taste. v) Swallowing is difficult especially for children and ill (unconscious) patients.

Write the advantages and disadvantages of fluidised bed dryer.

Description : Write the advantages and disadvantages of fluidised bed dryer. 

Last Answer : Advantages: i. It give high drying rate. ii. Suitable for thermolabile material. iii. Drying takes place of individual particles. iv. Temperature can be controlled. v. Prevent the ... : i. Turbulence produces cause attrition of particles. ii. Movement can generate electrical charges. 

Describe the resistive method for liquid level measurement. Write its advantages and disadvantages.

Description : Describe the resistive method for liquid level measurement. Write its advantages and disadvantages.

Last Answer : Working: This method uses mercury as a conductor as shown in the figure. A number of contact rods are placed at various liquid levels. As the level of liquid rises in the tank, head h ... connected in series is calibrated in terms of the liquid level and indicates the liquid level directly. 

Write any four advantages and four disadvantages of thermal power plant.

Description : Write any four advantages and four disadvantages of thermal power plant.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Write advantages and disadvantages of positive and negative feedback.

Description : Write advantages and disadvantages of positive and negative feedback.

Last Answer : Advantages of Positive Feedback: i) Voltage gain increases. ii) No phase shift is provided. iii) Feedback signal and input signal are in phase. iv) Input and Output voltage increases.  ... ii) Feedback signal and input signal are out of phase. iii) Input and Output voltage decreases.

Explain how a Programmable Logic Controller (PLC) is different from an ordinary personal computer. Also write the advantages and disadvantages of PLC.

Description : Explain how a Programmable Logic Controller (PLC) is different from an ordinary personal computer. Also write the advantages and disadvantages of PLC.

Last Answer : PLC PC 1 It has embedded processor with limited computing power It has a CPU with high computing power  2 Design of PLC is for reliable operation in industrial ... 3) Use of PLCs may be restricted in some high heat, vibration environment not suitable for electronic circuit

Write five advantages and five disadvantages of embodiment.

Description : Distributed under Creative Commons Attribution-ShareAlike - CC BY-SA. 

Last Answer : Five advantages:  1. Smaller Size  2. Smaller Weight  3. Lower Power Consumption  4. Lower Electromagnetic Interference  5. Lower Price  Five disadvantages  1. Lower Mean Time Between Failure  ... Obsolesce  4. Unmanageable Heat Loss  5. Difficult to Design  Version 2 EE IIT, Kharagpur

State advantages of friction.

Description : State advantages of friction.

Last Answer : State advantages of friction.