Specific heat of nickel –chrome is _____________ (A) 0.112 (B) 0.106. (C) 0.108. (D) 0.110.

Specific heat of nickel –chrome is _____________
 (A) 0.112 (B) 0.106.
 (C) 0.108. (D) 0.110.
by

1 Answer

Answer :

Ans: None of these
 Specific heat of Nickel-Chrome is 440 J/kg°C to 450 J/kg°C
by

Related questions

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L5? [ NOTE: Kirchhoff's voltage and current laws apply ] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L5? [ NOTE: Kirchhoff's voltage and current laws apply ] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Last Answer : Answer: D

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L2? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L2? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Last Answer : Answer: C

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L3? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L3? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Last Answer : Answer: B

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L4? EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L4? EL-0075 A. 110.4 volts B. 112.2 volts C. 113.0 volts D. 114.8 volts

Last Answer : Answer: A

When a voltage of 112 VDC is applied to the circuit illustrated with a resistance of 110 ohms the current will be________. EL-0018 A. .982 amps B. 1.018 amps C. 2.018 amps D. .222 amps

Description : When a voltage of 112 VDC is applied to the circuit illustrated with a resistance of 110 ohms the current will be________. EL-0018 A. .982 amps B. 1.018 amps C. 2.018 amps D. .222 amps

Last Answer : Answer: B

If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L1? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.3 volts D. 114.8 volts

Description : If the total source voltage of the three-wire distribution system shown in the illustration is 240 volts, what is the voltage across load L1? [NOTE: Kirchhoff's voltage and current laws apply.] EL-0075 A. 110.4 volts B. 112.2 volts C. 113.3 volts D. 114.8 volts

Last Answer : Answer: D

Given E = 40xyi + 20x 2 j + 2k. Calculate the potential between two points (1,-1,0) and (2,1,3). a) 105 b) 106 c) 107 d) 108

Description : Given E = 40xyi + 20x 2 j + 2k. Calculate the potential between two points (1,-1,0) and (2,1,3). a) 105 b) 106 c) 107 d) 108

Last Answer : b) 106

When a nickel-cadium battery begins gassing while connected to the battery charging circuit, you should _____________. A. do nothing as this is a normal condition when charging B. add distilled water to each cell to reduce the specific gravity of the electrolyte C. add potassium hydroxide to each cell to increase the specific gravity of the electrolyte D. decrease the charging rate

Description : When a nickel-cadium battery begins gassing while connected to the battery charging circuit, you should _____________. A. do nothing as this is a normal condition when charging B. add distilled water ... to each cell to increase the specific gravity of the electrolyte D. decrease the charging rate

Last Answer : Answer: A

A couple applied to a flywheel of mass 5 kg and of radius of gyration 20 cm produces an angular acceleration of 4 radians/sec2. The torque applied in dyne cm is a.8 x 104 b.8 x 106 c.8 x 107 d.8 x 108 e.8 x 1010

Description : A couple applied to a flywheel of mass 5 kg and of radius of gyration 20 cm produces an angular acceleration of 4 radians/sec2. The torque applied in dyne cm is a.8 x 104 b.8 x 106 c.8 x 107 d.8 x 108 e.8 x 1010

Last Answer : b. 8 x 106

One joule is equal to a.105 ergs b.108 ergs c.104 ergs d.107 ergs e.106 ergs

Description : One joule is equal to a.105 ergs b.108 ergs c.104 ergs d.107 ergs e.106 ergs

Last Answer : d. 107 ergs

The velocity of light in vacuum is : (1) 3 * 108 ms-1 (2) 2 * 108 ms-1 (3) 3 * 107 ms-1 (4) 3 * 106 ms-1

Description : The velocity of light in vacuum is : (1) 3 * 108 ms-1 (2) 2 * 108 ms-1 (3) 3 * 107 ms-1 (4) 3 * 106 ms-1

Last Answer : (1) 3 * 108 ms-1 Explanation: The speed of light in a vacuum is 186,282 miles per second that corresponds to about 3 * 108 ms-1.

Assume a frequency of 4 MHz, determine the phase shift offered by the line in the above problem. A. 108.5˚ B. 106.5˚ C. 115.5˚ D. 166.5˚

Description : Assume a frequency of 4 MHz, determine the phase shift offered by the line in the above problem. A. 108.5˚ B. 106.5˚ C. 115.5˚ D. 166.5˚

Last Answer : D. 166.5˚

The entire range of the electromagnetic spectrum spans a large spectrum of wave lengths varying from: (A) 10-10 to 106 m (B) 10-8 to 106 m (C) 10-10 to 1010 m (D) 10-8 to 108 m

Description : The entire range of the electromagnetic spectrum spans a large spectrum of wave lengths varying from: (A) 10-10 to 106 m (B) 10-8 to 106 m (C) 10-10 to 1010 m (D) 10-8 to 108 m

Last Answer : Answer: Option A

The open loop gain of the amplifier is ______ (a) 105 (b) 103 (c) 106 (d) 108

Description : The open loop gain of the amplifier is ______ (a) 105 (b) 103 (c) 106 (d) 108

Last Answer : (a) 105

A grouped frequency distribution table with classes of equal sizes using 63-72 (72 included) as one of the class is constructed for the following data 30, 32, 45, 54, 74, 78, 108, 112, 66, 76, 88, -Maths 9th

Description : A grouped frequency distribution table with classes of equal sizes using 63-72 (72 included) as one of the class is constructed for the following data 30, 32, 45, 54, 74, 78, 108, 112, 66, 76, 88, -Maths 9th

Last Answer : NEED ANSWER

A grouped frequency distribution table with classes of equal sizes using 63-72 (72 included) as one of the class is constructed for the following data 30, 32, 45, 54, 74, 78, 108, 112, 66, 76, 88, -Maths 9th

Description : A grouped frequency distribution table with classes of equal sizes using 63-72 (72 included) as one of the class is constructed for the following data 30, 32, 45, 54, 74, 78, 108, 112, 66, 76, 88, -Maths 9th

Last Answer : (b) We arrange the given data into groups like 13-22,23-32 103-112. (since, our data is from 14 to 112). The class width in this case is 9. Now, the given data can be arranged in tabular form as follows. Hence, the number of classes in distribution will be 10.

The average age of 150 students in a class is 40% of the number of students in the class and the average age of a group of 50 students present in the class is 32yrs and the average age of another 50 students in the class is 36yrs. What is the average age of the remaining students in the class? A) 102 B) 118 C) 112 D) 108

Description : The average age of 150 students in a class is 40% of the number of students in the class and the average age of a group of 50 students present in the class is 32yrs and the average age of another 50 students ... is the average age of the remaining students in the class? A) 102 B) 118 C) 112 D) 108

Last Answer : C) 150 students average 150×40/100=60 years According to the question, 150×60=50×32+50×36+50×X 50×X=9000-1600-1800 50x=5600 X=112

Mass of steel sphere having density 7850 kg m-3 and radius 0.15 m is A. 112 kg B. 290 kg C. 110.9 kg D. 300 kg

Description : Mass of steel sphere having density 7850 kg m-3 and radius 0.15 m is A. 112 kg B. 290 kg C. 110.9 kg D. 300 kg

Last Answer : 110.9 kg

How many cubic feet in the Kenmore refrigerator model 106.51109.110?

Description : How many cubic feet in the Kenmore refrigerator model 106.51109.110?

Last Answer : What is the answer ?

Money bill has been defined in - (1) (1) Article 110 (2) (2) Article 111 (3) Article 112 (4) Artcle 113

Description : Money bill has been defined in - (1) (1) Article 110 (2) (2) Article 111 (3) Article 112 (4) Artcle 113

Last Answer : (1) Article 110 Explanation: Article 110 - definition of money bills Article 111 - Assent to Bills Article 112 - Annual financial statement Article 113 - Procedure in Parliament with respect to estimates

With which article of the Indian Constitution is Money Bill related? A. Article 110 B. Article 109 C. Article 108 D. Article 107 E. None of the Above

Description : With which article of the Indian Constitution is Money Bill related? A. Article 110 B. Article 109 C. Article 108 D. Article 107 E. None of the Above

Last Answer : A. Article 110 Explanation: Under Article 110(1) of the Constitution, a Bill is deemed to be a Money Bill if it contains only provisions dealing with all or any of the following matters: (a) the imposition, ... or (g) any matter incidental to any of the matters specified in sub-clauses (a) to (f).

19/14 x 12/72 x 18/29 x 767 = ? (Take 2 digits after the decimal point) a) 110.69 b) 118.78 c) 111.56 d) None e) 108.98

Description : 19/14 x 12/72 x 18/29 x 767 = ? (Take 2 digits after the decimal point) a) 110.69 b) 118.78 c) 111.56 d) None e) 108.98

Last Answer : 19/14 x 12/72 x 18/29 x 767 =? Sol: 1.35 x 0.16 x 0.62 x 767 = ? 102.71 = ? Answer: d)

3, 5, 9, 15, 25, 41 , 67, ? (a) 108 (b) 52 (c) 110 (d) 111

Description : 3, 5, 9, 15, 25, 41 , 67, ? (a) 108 (b) 52 (c) 110 (d) 111

Last Answer : The difference between the number in this series is the sum of two previous differences .

The age of vaishu is 18 times that of her daughter raiza. If the age of raiza is 6years, what is the age of vaishu? a) 98 b) 110 c) 90 d) 108

Description : The age of vaishu is 18 times that of her daughter raiza. If the age of raiza is 6years, what is the age of vaishu? a) 98 b) 110 c) 90 d) 108

Last Answer : D vaishu’s present age = x vaishu’a age is 18 times her daughter’s age. Daughter’s age = 6. Therefore, 18 times of 6 = x 18 x 6 = x x= 108 years = vaishu’s age.

When all other removable partial denture considerations remain unchanged; clasps constructed of which material can engage the deepest undercut: A. Chrome cobalt casts B. Nickel chrome casts C. Wrought stainless steel (0,5mm) D. Wrought gold

Description : When all other removable partial denture considerations remain unchanged; clasps constructed of which material can engage the deepest undercut: A. Chrome cobalt casts B. Nickel chrome casts C. Wrought stainless steel (0,5mm) D. Wrought gold

Last Answer : D. Wrought gold

To determine the state of charge of a nickel-cadmium battery, you would use a/an _____________. A. voltmeter B. hydrometer C. ammeter D. potentiometer

Description : To determine the state of charge of a nickel-cadmium battery, you would use a/an _____________. A. voltmeter B. hydrometer C. ammeter D. potentiometer

Last Answer : Answer: A

A nickel-cadmium battery is receiving a normal charge and gases freely. The charging current should _____________. A. be increased B. be decreased C. be cut off and the battery allowed to cool D. remain the same

Description : A nickel-cadmium battery is receiving a normal charge and gases freely. The charging current should _____________. A. be increased B. be decreased C. be cut off and the battery allowed to cool D. remain the same

Last Answer : Answer: D

Most conducting materials such as copper, aluminum, iron, nickel, and tungsten _____________. A. increase in resistance with increased temperature B. increase in resistance with decreased temperature C. decrease in resistance with increased temperature D. increase in conductance with increased temperature

Description : Most conducting materials such as copper, aluminum, iron, nickel, and tungsten _____________. A. increase in resistance with increased temperature B. increase in resistance with decreased ... C. decrease in resistance with increased temperature D. increase in conductance with increased temperature

Last Answer : Answer: A

Local action in a nickel-cadmium battery is offset by _____________. A. separating the positive and negative plates with plastic spacers B. separating the positive and negative plates with resin impregnated spacers C. adding a small amount of lithium hydroxide to the electrolyte D. trickle charging

Description : Local action in a nickel-cadmium battery is offset by _____________. A. separating the positive and negative plates with plastic spacers B. separating the positive and negative plates with resin impregnated spacers C. adding a small amount of lithium hydroxide to the electrolyte D. trickle charging

Last Answer : Answer: D

Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Description : Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel

Last Answer : (C) Nickel-chrome steel

__________ steel is widely used for the manufacture of motor car crankshafts. (A) Silicon (B) Nickel (C) Chrome (D) High speed

Description : __________ steel is widely used for the manufacture of motor car crankshafts. (A) Silicon (B) Nickel (C) Chrome (D) High speed

Last Answer : (C) Chrome

The steel used for rails under heavy traffic and on sharp curves, is (A) Nickel steel (B) Chrome steel (C) Manganese steel (D) Vanadium steel

Description : The steel used for rails under heavy traffic and on sharp curves, is (A) Nickel steel (B) Chrome steel (C) Manganese steel (D) Vanadium steel

Last Answer : Answer: Option C

To determine the state of charge of a nickel-cadmium battery, you should ___________. A. check the electrolyte with a hydrometer B. use the constant specific gravity method C. use a nonbreakable mercury thermometer D. connect a voltmeter to the battery terminals

Description : To determine the state of charge of a nickel-cadmium battery, you should ___________. A. check the electrolyte with a hydrometer B. use the constant specific gravity method C. use a nonbreakable mercury thermometer D. connect a voltmeter to the battery terminals

Last Answer : Answer: D

When charging a nickel-cadmium battery, ____________. A. the charging rate should be lessened when gassing commences B. overcharging should be avoided C. the specific gravity of the electrolyte will be unaffected by the state of charge D. add distilled water just prior to charging to insure proper mixing

Description : When charging a nickel-cadmium battery, ____________. A. the charging rate should be lessened when gassing commences B. overcharging should be avoided C. the specific gravity of the electrolyte will be ... by the state of charge D. add distilled water just prior to charging to insure proper mixing

Last Answer : Answer: C

PROBLEM GThe moist unit weights of the soil are 105.73 pcf and 112.67 pcf, and the respective degree of saturation are 50.0% and 75.0%, compute the values of thevoid ratio, porosity, and specific gravity of the given soil?

Description : PROBLEM GThe moist unit weights of the soil are 105.73 pcf and 112.67 pcf, and the respective degree of saturation are 50.0% and 75.0%, compute the values of thevoid ratio, porosity, and specific gravity of the given soil?

Last Answer : Pressuron theory (2013) by Olivier Minazzoli and Aurélien Hees

Coast Guard Regulations (46 CFR) require that fire door holding and release systems are to comply with subpart _________. A. 111.15 B. 111.54 C. 111.99 D. 111.112

Description : Coast Guard Regulations (46 CFR) require that fire door holding and release systems are to comply with subpart _________. A. 111.15 B. 111.54 C. 111.99 D. 111.112

Last Answer : Answer: C

When a voltage of 112 VDC is applied to the circuit illustrated with a resistance of 17.8 ohms the current will be________. EL-0018 A. .158 amps B. 5.82 amps C. 6.29 amps D. 129.8m amps

Description : When a voltage of 112 VDC is applied to the circuit illustrated with a resistance of 17.8 ohms the current will be________. EL-0018 A. .158 amps B. 5.82 amps C. 6.29 amps D. 129.8m amps

Last Answer : Answer: C

When a voltage of 112 VDC is applied to the illustrated circuit with a resistance of 237 ohms the current will be ________. EL-0018 A. 1.47 amps B. 2.11 amps C. 347 milliamps D. 472.6 milliamps

Description : When a voltage of 112 VDC is applied to the illustrated circuit with a resistance of 237 ohms the current will be ________. EL-0018 A. 1.47 amps B. 2.11 amps C. 347 milliamps D. 472.6 milliamps

Last Answer : Answer: D

When a voltage of 112 VDC is applied to the circuit illustrated with a resistance of 470 ohms the current will be________. EL-0018 A. .238 amps B. 4.196 amps C. 582 m amps D. 19.723 amps

Description : When a voltage of 112 VDC is applied to the circuit illustrated with a resistance of 470 ohms the current will be________. EL-0018 A. .238 amps B. 4.196 amps C. 582 m amps D. 19.723 amps

Last Answer : Answer: A

When a voltage of 112 VDC is applied to the circuit illustrated with a resistance of 10,230 ohms the current will be________. EL-0018 A. .010 amps B. .913 amps C. 103 m amps D. 934 m amps

Description : When a voltage of 112 VDC is applied to the circuit illustrated with a resistance of 10,230 ohms the current will be________. EL-0018 A. .010 amps B. .913 amps C. 103 m amps D. 934 m amps

Last Answer : Answer: A

When a voltage of 112 VDC is applied to the illustrated circuit with a resistance of 32 ohms the current will be________. EL-0018 A. .285 amps B. 3.5 amps C. 9.142 amps D. 144 m amps

Description : When a voltage of 112 VDC is applied to the illustrated circuit with a resistance of 32 ohms the current will be________. EL-0018 A. .285 amps B. 3.5 amps C. 9.142 amps D. 144 m amps

Last Answer : Answer: B

When a voltage of 112 VDC is applied to the illustrated circuit with a resistance of 12 ohms the current will be ________. EL-0018 A. .107 amps B. 1.28 amps C. 9.33 amps D. 124 milliamps

Description : When a voltage of 112 VDC is applied to the illustrated circuit with a resistance of 12 ohms the current will be ________. EL-0018 A. .107 amps B. 1.28 amps C. 9.33 amps D. 124 milliamps

Last Answer : Answer: C

When a voltage of 95 VDC is applied to the circuit illustrated with a resistance of 17.8 ohms the current will be________. EL-0018 A. .187 amps B. 3.34 amps C. 5.34 amps D. 112.8m amps

Description : When a voltage of 95 VDC is applied to the circuit illustrated with a resistance of 17.8 ohms the current will be________. EL-0018 A. .187 amps B. 3.34 amps C. 5.34 amps D. 112.8m amps

Last Answer : Answer: C

The heat released by cooling one mole of copper from 400 K to room temperature (300 K) is (assume : Cp of copper is 23 J K-1mole-1) (A) 2300 J (B) 4600 J (C) 230 J (D) 2.3 × 106 J

Description : The heat released by cooling one mole of copper from 400 K to room temperature (300 K) is (assume : Cp of copper is 23 J K-1mole-1) (A) 2300 J (B) 4600 J (C) 230 J (D) 2.3 × 106 J

Last Answer : A) 2300 J

If violent gassing occurs when a lead-acid storage battery is first placed on charge, the _____________. A. battery must be given an emergency charge B. charging rate is too low C. charging rate is too high D. specific gravity of the electrolyte solution is too low

Description : If violent gassing occurs when a lead-acid storage battery is first placed on charge, the _____________. A. battery must be given an emergency charge B. charging rate is too low C. charging rate is too high D. specific gravity of the electrolyte solution is too low

Last Answer : Answer: C

The specific gravity of the electrolyte solution in a lead acid battery _____________. A. is not effected during charging B. remains the same during discharge C. would read close to 1.830 when discharged D. gives an indication of the state of charge of the battery

Description : The specific gravity of the electrolyte solution in a lead acid battery _____________. A. is not effected during charging B. remains the same during discharge C. would read close to 1.830 when discharged D. gives an indication of the state of charge of the battery

Last Answer : Answer: D

The specific gravity of the electrolyte in a lead-acid battery is measured by a _____________. A. gould plate B. titration pipette C. hydrometer D. litmus paper test

Description : The specific gravity of the electrolyte in a lead-acid battery is measured by a _____________. A. gould plate B. titration pipette C. hydrometer D. litmus paper test

Last Answer : Answer: C

Violent gassing from a lead-acid battery while it is being charged, indicates that the _____________. A. plate separators are grounded B. battery compartment ventilation is inadequate C. electrolyte specific gravity is too low D. charging rate is too high

Description : Violent gassing from a lead-acid battery while it is being charged, indicates that the _____________. A. plate separators are grounded B. battery compartment ventilation is inadequate C. electrolyte specific gravity is too low D. charging rate is too high

Last Answer : Answer: D

The standard procedure for maintaining the charge in an emergency diesel starting battery is to trickle charge the battery _____________. A. continuously B. at least once each week C. whenever the charge falls to 75% of full charge D. whenever the electrolyte specific gravity falls to 1.250 or lower

Description : The standard procedure for maintaining the charge in an emergency diesel starting battery is to trickle charge the battery _____________. A. continuously B. at least once each week C. whenever the charge falls to 75% of full charge D. whenever the electrolyte specific gravity falls to 1.250 or lower

Last Answer : Answer: A