Description : The yield strength and tensile strength of low carbon steel may be improved by the addition of (A) Manganese (B) Chromium (C) Nickel (D) Vanadium
Last Answer : Answer: Option D
Description : Chrome vanadium steels usually contain 0.8 to 1.1% Cr, 0.25 to 0.35% C and < 0.25% V. It is (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives (B) ... resistance (C) Having poor toughness (D) Not helpful in producing cleaner steel due to oxidising action of vanadium
Last Answer : (A) Used for making axle & shafts of aeroplanes, automobiles and locomotives
Description : __________ is the most important element, which controls the physical properties of steel. (A) Manganese (B) Silicon (C) Carbon (D) Vanadium
Last Answer : (C) Carbon
Description : Brittleness induced due to the presence of sulphur in steel can be reduced by adding (A) Manganese (B) Magnesium (C) Vanadium (D) Copper
Last Answer : (A) Manganese
Last Answer : r: Option A
Description : The addition of high proportions of maganese makes steel useful in making rails or railroads because manganese useful in making rails or railroads bec
Last Answer : The addition of high proportions of maganese makes steel useful in making rails or railroads because manganese useful in ... ,iii C. ii,iv D. I,iii,iv
Last Answer : The addition of high proportions of maganese makes steel useful in making rails or railroads because ... . can show highest oxidation state of +7
Description : __________ is added in stainless steel to prevent inter crystal corrosion. (A) Vanadium (B) Niobium (C) Chromium (D) Nickel
Last Answer : (B) Niobium
Description : Corrosion resistance of steel is increased by the addition of (A) Phosphorous and tungsten (B) Nickel and chromium (C) Lead and vanadium (D) Molybdenum and tungsten
Last Answer : (B) Nickel and chromium
Description : Addition of __________ in steel can help in increasing the depth of hardness. (A) Nickel (B) Chromium (C) Vanadium (D) Tungsten
Last Answer : (D) Tungsten
Description : Stainless steel contains (A) Chromium and nickel (B) Copper (C) Aluminium (D) Vanadium
Last Answer : (A) Chromium and nickel
Description : All of the following alloying elements of steel increases hardness but sacrifice ductility, except (A) Nickel (B) Vanadium (C) Molybdenum (D) Chromium
Last Answer : (A) Nickel
Description : Nickel and __________ are the alloying element added in steel to increase its toughness. (A) Molybdenum (B) Chromium (C) Vanadium (D) Silicon
Last Answer : Option D
Description : Pick up the correct statement from the following: (A) Detailed survey is carried out for a strip of land about 30 m at sharp curves (B) Levels are taken along the trace cut at an interval of 20 m (C) Contour interval is generally adopted at 2 metres vertical interval (D) All the above
Description : Which of the following alloy steels is the most suitable for making gun barrels and projectiles? (A) Tungsten steel (B) Molybdenum steel (C) Nickel-chrome steel (D) Cobalt steel
Last Answer : (C) Nickel-chrome steel
Description : __________ steel is widely used for the manufacture of motor car crankshafts. (A) Silicon (B) Nickel (C) Chrome (D) High speed
Last Answer : (C) Chrome
Description : When all other removable partial denture considerations remain unchanged; clasps constructed of which material can engage the deepest undercut: A. Chrome cobalt casts B. Nickel chrome casts C. Wrought stainless steel (0,5mm) D. Wrought gold
Last Answer : D. Wrought gold
Description : Stainless steel is usually made by alloying the steel with – (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper
Last Answer : (3) chromium and nickel Explanation: In metallurgy, stainless steel is defined as a steel alloy with a minimum of 10.5 per cent to 11 per cent chromium content by mass. There are ... virtually nonmagnetic and less brittle at low temperatures. For greater hardness and strength, more carbon is added.
Description : Work hardenable alloy steel used to make the bucket wheel excavators, blades of bulldozers and other earth moving equipments contain iron, carbon and (A) Manganese (B) Silicon (C) Nickel (D) Chromium
Description : Which of the following is not a principal alloying element for the structural steel? (A) Molybdenum (B) Nickel (C) Manganese (D) Chromium
Last Answer : (A) Molybdenum
Description : Alloying elements present in Haynes stellite, which has superior performance than high speed steel, are: (A) Nickel, cobalt & chromium (B) Tungsten, chromium & cobalt (C) Manganese, chromium & cobalt (D) Tungsten, molybdenum & nickel
Last Answer : Option B
Description : Give the chemical composition forstainlesssteel, Tungsten steel, Nickel and Manganese steel.
Last Answer : Chemical composition of: 1.Stainless steel: Min 12 % chromium 12 to 30 % Cr 4 to 25 % Ni 2.Tungsten steel: 18 % Tungsten (W) 4 % Cr 1 % vanadium 0.7 % carbon Small amount of Si , S , P ,Mn , Fe. 3. ... 4.Manganese steel: (e.g. C-Mn steel) 0.15 % C 1.4 % Mn 0.218 % Si 0.007 % S
Description : Stainless steel is usually made by alloying the steel with (1) copper and nickel (2) copper and chromium (3) chromium and nickel (4) manganese and copper
Last Answer : chromium and nickel
Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel
Last Answer : (A) Silica-alumina
Description : Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide
Last Answer : (A) Phosphoric acid on kieselguhr
Description : Constituents of stellite are (A) Zinc, copper and nickel (B) Cobalt, chromium and tungsten (C) Zinc, aluminium and nickel (D) Nickel, cobalt and vanadium
Last Answer : (B) Cobalt, chromium and tungsten
Description : Which of the following has a very high carbide forming tendency in steels? (A) Silicon (B) Chromium (C) Nickel (D) Vanadium
Last Answer : (D) Vanadium
Description : The catalyst used in shift converter is (A) Nickel (B) Vanadium (C) Silica gel (D) Alumina
Description : Catalyst used in the manufacture of NH3 by Haber's process is finely divided (A) Nickel (B) Iron (C) Vanadium pentoxide (D) Alumina
Last Answer : (B) Iron
Description : Catalyst used in Haber's process for ammonia production is (A) Reduced iron oxide (B) Nickel (C) Vanadium pentoxide (D) Silica gel
Last Answer : (A) Reduced iron oxide
Description : Oxidation of ortho-xylene in presence of __________ catalyst is done to produce phthalic anhydride on commercial scale. (A) Nickel (B) Vanadium (C) Alumina (D) Iron
Last Answer : (B) Vanadium
Description : Constituents of stellite are (A) Zinc, copper & nickel (B) Cobalt, chromium & tungsten (C) Zinc, aluminium & nickel (D) Nickel, cobalt & vanadium
Last Answer : (B) Cobalt, chromium & tungsten
Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum
Last Answer : (D) Platinum
Description : Which oxide of the following metals is often used as a pigment in white paint? w) titanium x) cobalt y) nickel z) vanadium
Last Answer : ANSWER: W -- TITANIUM
Description : Stainless steel resists corrosion due to (A) Carbon (B) Sulphur (C) Vanadium (D) Chromium
Description : Vanadium steel is generally used for (A) Railway switches and crossing (B) Bearing balls (C) Magnets (D) Axles and spring
Description : The steel used for the manufacture of rails, is (A) Bessemer steel (B) Mild steel (C) Cast steel (D) Stainless steel
Last Answer : Answer: Option A
Description : For rolling mark 60 kg/Sail/X/2010 the first testing in the field after initial testing of rails in rail manufacturing plant, will be done. (i) After test free period of 25%. (ii) After passage of every 40 ... period.* (iii) After passage of 200 GMT. (iv) On the basis of annual GMT of the section.
Last Answer : (ii) After passage of every 40 GMT traffic during test free period.*
Description : Specific heat of nickel –chrome is _____________ (A) 0.112 (B) 0.106. (C) 0.108. (D) 0.110.
Last Answer : Ans: None of these Specific heat of Nickel-Chrome is 440 J/kg°C to 450 J/kg°C
Description : In the world, India tops in the production of – (1) Nickel (2) Uranium (3) Mica (4) Manganese
Last Answer : (3) Mica Explanation: Mica is produced in huge proportion in India. In fact, India is one of the leading suppliers of mica to the world. India alone accounts fora major portion ... indispensable component of the electrical industry. India accounts for 60 % of mica embarking in international trade.
Description : India has attained self-sufficiency in the production of – (1) Iron (2) Coal (3) Manganese (4) Nickel
Last Answer : (2) Coal Explanation: India has the 4th largest coal reserves in the world. Indian mineral industry has contributed significantly to make the nation self-sufficient in coal. To meet the ... other users, the production trends in coal and lignite sectors have shown a remarkable increasing trend.
Description : Duralumin is an alloy of (A) Aluminium, copper and manganese (B) Aluminium, nickel and silicon (C) Aluminium and nickel (D) None of these
Last Answer : (A) Aluminium, copper and manganese
Description : Spark plugs, ignition tubes and electrodes are made of nickel __________ alloys. (A) Beryllium (B) Manganese (C) Copper (D) Iron
Last Answer : (B) Manganese
Description : Gun metal is an alloy of (A) Nickel, tin and copper (B) Copper, tin and zinc (C) Copper, phosphorus and nickel (D) Manganese, phosphorus and nickel
Last Answer : (B) Copper, tin and zinc
Description : The following element can't impart high strength at elevated temperature A. Manganese B. Magnesium C. Nickel D. Silicon
Last Answer : B. Magnesium
Description : In which of the following all three are macronutrients? (a) Molybdenum, magnesium, manganese (b) Nitrogen, nickel, phosphorus (c) Boron, zinc, manganese (d) Iron, copper, molybdenum
Last Answer : (d) Iron, copper, molybdenum
Description : Weld decay is caused by the formation of a compound with carbon. The other element in this compound is: a) Manganese b) Sulphur c) Chromium d) Nickel
Last Answer : c) Chromium
Description : Manganin is an alloy of (A) copper, manganese and nickel. (B) copper and manganese. (C) manganese and nickel. (D) manganese, aluminium and nickel.
Last Answer : (A) copper, manganese and nickel.
Description : Which of the following metals is obtained from its most common ore using an electrolytic process? w) nickel x) tin y) aluminum z) manganese
Last Answer : ANSWER: Y -- ALUMINUM