Materials, which provide a path to the magnetic flux, are classified as (A) insulating materials. (B) semi conducting materials. (C) magnetic materials. (D) dielectric materials.

Materials, which provide a path to the magnetic flux, are classified as
(A) insulating materials. (B) semi conducting materials.
 (C) magnetic materials. (D) dielectric materials.
by

1 Answer

Answer :

(C) magnetic materials.
by

Related questions

Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Description : Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Last Answer : (B) low resistivity conducting materials.

Dielectric materials are (A) Insulating materials. (B) Semiconducting materials. (C) Magnetic materials. (D) Ferroelectric materials.

Description : Dielectric materials are (A) Insulating materials. (B) Semiconducting materials. (C) Magnetic materials. (D) Ferroelectric materials.

Last Answer : (A) Insulating materials.

Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Description : Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Last Answer : (A) provide path to magnetic flux.

Materials which can store electrical energy are called (A) magnetic materials. (B) semi conductors. (C) dielectric materials. (D) super conductors.

Description : Materials which can store electrical energy are called (A) magnetic materials. (B) semi conductors. (C) dielectric materials. (D) super conductors.

Last Answer : (C) dielectric materials.

Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Description : Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Last Answer : (D) Both insulating and dielectric material.

Permanent magnets are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) semi conductors. (D) super conductors.

Description : Permanent magnets are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) semi conductors. (D) super conductors.

Last Answer : (B) hard magnetic materials.

Give four examples of natural insulating materials.

Description : Give four examples of natural insulating materials.

Last Answer : Ans: Examples of the natural insulating materials are cotton, rubber, wood, mica.

In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

Description : In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (C) Remains unchanged

Hard magnetic materials are used for making (A) Permanent magnets. (B) Temporary magnets. (C) Conductors. (D) Insulator.

Description : Hard magnetic materials are used for making (A) Permanent magnets. (B) Temporary magnets. (C) Conductors. (D) Insulator.

Last Answer : (A) Permanent magnets.

The critical temperature above which the ferromagnetic materials loose their magnetic property is known as (A) hysterisis. (B) Curie point. (C) transition temperature. (D) standard temperature.

Description : The critical temperature above which the ferromagnetic materials loose their magnetic property is known as (A) hysterisis. (B) Curie point. (C) transition temperature. (D) standard temperature.

Last Answer : (B) Curie point

The covers of electrical machines are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) super conductors. (D) semiconductors.

Description : The covers of electrical machines are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) super conductors. (D) semiconductors.

Last Answer : (A) soft magnetic materials.

The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength of the insulation B. the paint dust is composed of abrasive and semi-conducting materials which impair insulation C. paint dust buildup has a tendency to cause corrosion D. phase windings frequently become isolated from each other due to dust interference at the terminals

Description : The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength ... phase windings frequently become isolated from each other due to dust interference at the terminals

Last Answer : Answer: B

The dielectric strength of transformer oil should be (A) 100 V. (B) 5 KV. (C) 30 KV. (D) 132 KV.

Description : The dielectric strength of transformer oil should be (A) 100 V. (B) 5 KV. (C) 30 KV. (D) 132 KV.

Last Answer : (C) 30 KV.

Dielectric constant of vacuum is (A) infinity. (B) 100. (C) one. (D) zero.

Description : Dielectric constant of vacuum is (A) infinity. (B) 100. (C) one. (D) zero.

Last Answer : (C) one.

The dielectric constant of air is practically taken as (A) more than unity. (B) unity. (C) less than unity. (D) zero.

Description : The dielectric constant of air is practically taken as (A) more than unity. (B) unity. (C) less than unity. (D) zero.

Last Answer : (B) unity.

Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Description : Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Last Answer : (A) Negative

The property due to which the resistance of some metal or compound vanishes under certain conditions is (A) Semi conductivity. (B) Super conductivity. (C) Curie point. (D) Magnetostriction.

Description : The property due to which the resistance of some metal or compound vanishes under certain conditions is (A) Semi conductivity. (B) Super conductivity. (C) Curie point. (D) Magnetostriction.

Last Answer : (B) Super conductivity.

In n type semi conductor added impurity is (A) pentavalent. (B) divalent. (C) tetravalent. (D) trivalent.

Description : In n type semi conductor added impurity is (A) pentavalent. (B) divalent. (C) tetravalent. (D) trivalent.

Last Answer : (A) pentavalent.

State the functions of a fuse. Mention the desirable properties of fuse materials.

Description : State the functions of a fuse. Mention the desirable properties of fuse materials.

Last Answer : Ans: Fuse is a protective device, which consists of a thin wire or strip. This wire or strip is placed with the circuit it has to protect, so that the circuit-current flows through it. When ... silver and silver alloys are used of lower ratings. Copper alloys are used in fuses of higher ratings.

Classify plastic materials into two categories, describe their important properties and give two examples of each.

Description : Classify plastic materials into two categories, describe their important properties and give two examples of each.

Last Answer : Ans: Plastic materials can be classified into thermoplastic and thermosetting plastics. Thermoplastic materials:- The properties of these plastic materials do not change considerably if they are melted ... forming elastic threads and films. Examples are Phenol formaldehyde (Bakelite), Epoxy resins.

Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Description : Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Last Answer : (D) All the above.

Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Description : Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Last Answer : (A) ferromagnetic material.

Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Description : Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Last Answer : (D) Grain orientation of material.

A pure semiconductor under ordinary conditions behaves like (A) a conductor. (B) an insulator. (C) a magnetic material. (D) a ferro-electric material.

Description : A pure semiconductor under ordinary conditions behaves like (A) a conductor. (B) an insulator. (C) a magnetic material. (D) a ferro-electric material.

Last Answer : (B) an insulator.

The breakdown of insulation of the cable can be avoided economically by the use of (a) inter-sheaths (b) insulating materials with different dielectric constants (c) both (a) and (b) (d) none of the above

Description : The breakdown of insulation of the cable can be avoided economically by the use of (a) inter-sheaths (b) insulating materials with different dielectric constants (c) both (a) and (b) (d) none of the above

Last Answer : (c) both (a) and (b)

State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials.

Description : State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials. 

Last Answer : Failure phenomena in insulating material means the dielectric property fails :  The dielectric failure mean the dielectric strength of insulating material reduces due to high voltages or high ... 6. Due to poor maintenance of insulating material there may be possibility dielectric failure 

The following type of bonding is strongly directional in solids. (A) Vander Waal's (B) Ionic (C) Metallic (D) Covalent

Description : The following type of bonding is strongly directional in solids. (A) Vander Waal's (B) Ionic (C) Metallic (D) Covalent

Last Answer : D) Covalent

What is a modular system? List the important properties of a modular system.

Description : What is a modular system? List the important properties of a modular system.

Last Answer : Ans: A modular system consists of well defined manageable units to well defined interfaces among them. Desirable properties are Each module is a well defined subsystem useful to others Each module ... modules Modules should be easier to use than build Modules should have a simple interface

Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Description : Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Last Answer : (B) Resistivity

Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Description : Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Last Answer : (D) Brass.

Atoms with four valence electrons are good conductors. (A) True (B) False

Description : Atoms with four valence electrons are good conductors. (A) True (B) False

Last Answer : (B) False

Insulators have (A) A full valence band. (B) An empty conduction band. (C) A large energy gap. (D) All the above.

Description : Insulators have (A) A full valence band. (B) An empty conduction band. (C) A large energy gap. (D) All the above.

Last Answer : (C) A large energy gap.

Paper is hygroscopic and absorbent. (A) True (B) False

Description : Paper is hygroscopic and absorbent. (A) True (B) False

Last Answer : (A) True

Addition of trivalent impurity to a semiconductor creates many (A) holes. (B) free electrons. (C) valance electrons. (D) bound electrons.

Description : Addition of trivalent impurity to a semiconductor creates many (A) holes. (B) free electrons. (C) valance electrons. (D) bound electrons.

Last Answer : (B) free electrons.

Hall effect is associated with (A) Conductors. (B) Semiconductors. (C) Thermistors. (D) Solders.

Description : Hall effect is associated with (A) Conductors. (B) Semiconductors. (C) Thermistors. (D) Solders.

Last Answer : (B) Semiconductors.

Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Description : Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Last Answer : (A) Nichrome

A transistor has (A) One p-n junction. (B) Two p-n junction. (C) Four p-n junction. (D) Five p-n junction.

Description : A transistor has (A) One p-n junction. (B) Two p-n junction. (C) Four p-n junction. (D) Five p-n junction.

Last Answer : (B) Two p-n junction.

Bronze is an alloy of (A) Copper and Tin. (B) Copper and Steel. (C) Copper and Mercury. (D) Copper and Aluminium.

Description : Bronze is an alloy of (A) Copper and Tin. (B) Copper and Steel. (C) Copper and Mercury. (D) Copper and Aluminium.

Last Answer : (A) Copper and Tin.

Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.

Description : Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.

Last Answer : (C) Tungsten.

Number of Terminals in a MOSFET are (A) Two (B) Three (C) Four (D) Five

Description : Number of Terminals in a MOSFET are (A) Two (B) Three (C) Four (D) Five

Last Answer : (B) Three

When a semiconductor is doped with a P-type impurity, each impurity atom will (A) acquire negative charge. (B) acquire positive charge. (C) remain electrically neutral. (D) give away one electron.

Description : When a semiconductor is doped with a P-type impurity, each impurity atom will (A) acquire negative charge. (B) acquire positive charge. (C) remain electrically neutral. (D) give away one electron.

Last Answer : (A) acquire negative charge.

The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Description : The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Last Answer : (B) increases with temperature.

P-N junction is (A) a rectifier. (B) an amplifier. (C) an Oscillator. (D) a Coupler.

Description : P-N junction is (A) a rectifier. (B) an amplifier. (C) an Oscillator. (D) a Coupler.

Last Answer : (A) a rectifier.

What is the type of bonding in silicon? (A) Ionic. (B) Covalent. (C) Metallic. (D) Ionic + Metallic

Description : What is the type of bonding in silicon? (A) Ionic. (B) Covalent. (C) Metallic. (D) Ionic + Metallic

Last Answer : (B) Covalent.

Micanite is a form of (A) Built up mica. (B) Hydrated potassium aluminium silicate. (C) Magnesium mica. (D) Calcium mica.

Description : Micanite is a form of (A) Built up mica. (B) Hydrated potassium aluminium silicate. (C) Magnesium mica. (D) Calcium mica.

Last Answer : (A) Built up mica.

The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3

Description : The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3

Last Answer : (A) SiO2

Hard ferrites are used for making (A) Transformer cores. (B) Electrical machinery. (C) High frequency equipment. (D) Light weight permanent magnets.

Description : Hard ferrites are used for making (A) Transformer cores. (B) Electrical machinery. (C) High frequency equipment. (D) Light weight permanent magnets.

Last Answer : (D) Light weight permanent magnets.

Aluminium is (A) Silvery white in colour. (B) Yellow in colour. (C) Reddish in colour. (D) Pale yellow in colour.

Description : Aluminium is (A) Silvery white in colour. (B) Yellow in colour. (C) Reddish in colour. (D) Pale yellow in colour.

Last Answer : (A) Silvery white in colour.

The percentage of carbon in mild steel is (A) 0.08 to 0.3 % (B) 0.5 to 1.4 % (D) 2.35 % (D) 0.5 %

Description : The percentage of carbon in mild steel is (A) 0.08 to 0.3 % (B) 0.5 to 1.4 % (D) 2.35 % (D) 0.5 %

Last Answer : (A) 0.08 to 0.3 %