The critical temperature above which the ferromagnetic materials loose their magnetic property is known as (A) hysterisis. (B) Curie point. (C) transition temperature. (D) standard temperature.

The critical temperature above which the ferromagnetic materials loose their magnetic
property is known as
(A) hysterisis. (B) Curie point.
 (C) transition temperature. (D) standard temperature.
by

1 Answer

Answer :

(B) Curie point
by

Related questions

Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft magnetic materials (C) Soft magnetic materials (e.g., pure iron) have higher permeability and low hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Description : Pick out the wrong statement. (A) A ferromagnetic material becomes paramagnetic above the 'Curie temperature' (B) Permanent magnets are made of hard materials, whereas electromagnets require soft ... hysterisis loss and coercive forces (D) Tungsten steel and alnico are not hard magnetic materials

Last Answer : Option D

The property due to which the resistance of some metal or compound vanishes under certain conditions is (A) Semi conductivity. (B) Super conductivity. (C) Curie point. (D) Magnetostriction.

Description : The property due to which the resistance of some metal or compound vanishes under certain conditions is (A) Semi conductivity. (B) Super conductivity. (C) Curie point. (D) Magnetostriction.

Last Answer : (B) Super conductivity.

Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Description : Ferrites are (A) ferromagnetic material. (B) ferrimagnetic materials. (C) anti ferromagnetic material. (D) diamagnetic materials.

Last Answer : (A) ferromagnetic material.

The transition temperature at which all the ferromagnetic materials become paramagnetic materials is termed as the 'Curie temperature'. Its value for cobalt is __________ °C. (A) 768 (B) 1127 (C) 1359 (D) 1480

Description : The transition temperature at which all the ferromagnetic materials become paramagnetic materials is termed as the 'Curie temperature'. Its value for cobalt is __________ °C. (A) 768 (B) 1127 (C) 1359 (D) 1480

Last Answer : (B) 1127

In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

Description : In a ferromagnetic material the state of flux density is as follows when external magnetic field is applied to it. (A) Increased (B) Decreased (C) Remains unchanged (D) Becomes zero

Last Answer : (C) Remains unchanged

The temperature at which ferromagnetic material can no longer be magnetised by the outside forces, is termed as the (A) Critical point (B) Curie temperature (C) Inversion temperature (D) Eutectic temperature

Description : The temperature at which ferromagnetic material can no longer be magnetised by the outside forces, is termed as the (A) Critical point (B) Curie temperature (C) Inversion temperature (D) Eutectic temperature

Last Answer : (B) Curie temperature

Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Description : Magnetic materials (A) provide path to magnetic flux. (B) are good insulators. (C) are semiconductors. (D) None.

Last Answer : (A) provide path to magnetic flux.

Hard magnetic materials are used for making (A) Permanent magnets. (B) Temporary magnets. (C) Conductors. (D) Insulator.

Description : Hard magnetic materials are used for making (A) Permanent magnets. (B) Temporary magnets. (C) Conductors. (D) Insulator.

Last Answer : (A) Permanent magnets.

Materials, which provide a path to the magnetic flux, are classified as (A) insulating materials. (B) semi conducting materials. (C) magnetic materials. (D) dielectric materials.

Description : Materials, which provide a path to the magnetic flux, are classified as (A) insulating materials. (B) semi conducting materials. (C) magnetic materials. (D) dielectric materials.

Last Answer : (C) magnetic materials.

Permanent magnets are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) semi conductors. (D) super conductors.

Description : Permanent magnets are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) semi conductors. (D) super conductors.

Last Answer : (B) hard magnetic materials.

Dielectric materials are (A) Insulating materials. (B) Semiconducting materials. (C) Magnetic materials. (D) Ferroelectric materials.

Description : Dielectric materials are (A) Insulating materials. (B) Semiconducting materials. (C) Magnetic materials. (D) Ferroelectric materials.

Last Answer : (A) Insulating materials.

Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Description : Gold and silver are (A) dielectric materials (B) low resistivity conducting materials. (C) magnetic materials. (D) insulating materials.

Last Answer : (B) low resistivity conducting materials.

The covers of electrical machines are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) super conductors. (D) semiconductors.

Description : The covers of electrical machines are made of (A) soft magnetic materials. (B) hard magnetic materials. (C) super conductors. (D) semiconductors.

Last Answer : (A) soft magnetic materials.

Materials which can store electrical energy are called (A) magnetic materials. (B) semi conductors. (C) dielectric materials. (D) super conductors.

Description : Materials which can store electrical energy are called (A) magnetic materials. (B) semi conductors. (C) dielectric materials. (D) super conductors.

Last Answer : (C) dielectric materials.

Heating of ferromagnetic materials to a temperature above Curie temperature makes it (A) Insulator for heat & electricity transmission (B) Ferritic (C) Behave like paramagnetic materials (D) Superconductor

Description : Heating of ferromagnetic materials to a temperature above Curie temperature makes it (A) Insulator for heat & electricity transmission (B) Ferritic (C) Behave like paramagnetic materials (D) Superconductor

Last Answer : Option C

A magnetic material becomes __________ above the Curie temperature. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Description : A magnetic material becomes __________ above the Curie temperature. (A) Ferromagnetic (B) Diamagnetic (C) Paramagnetic (D) None of these

Last Answer : (C) Paramagnetic

Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Description : Ferroelectric materials are characterised by (A) Very high degree of polarisation. (B) A sharp dependence of polarisation on temperature. (C) Non-linear dependence of the charge Q on the applied voltage. (D) All the above.

Last Answer : (D) All the above.

Classify plastic materials into two categories, describe their important properties and give two examples of each.

Description : Classify plastic materials into two categories, describe their important properties and give two examples of each.

Last Answer : Ans: Plastic materials can be classified into thermoplastic and thermosetting plastics. Thermoplastic materials:- The properties of these plastic materials do not change considerably if they are melted ... forming elastic threads and films. Examples are Phenol formaldehyde (Bakelite), Epoxy resins.

Pure nickel is (A) Ferromagnetic above its curie point (i.e., 415°C)(B) Having h.c.p. crystal lattice(C) Ferromagnetic at room temperature(D) Not resistant to oxidation at high temperature

Description : Pure nickel is (A) Ferromagnetic above its curie point (i.e., 415°C) (B) Having h.c.p. crystal lattice (C) Ferromagnetic at room temperature (D) Not resistant to oxidation at high temperature

Last Answer : (C) Ferromagnetic at room temperature

State the functions of a fuse. Mention the desirable properties of fuse materials.

Description : State the functions of a fuse. Mention the desirable properties of fuse materials.

Last Answer : Ans: Fuse is a protective device, which consists of a thin wire or strip. This wire or strip is placed with the circuit it has to protect, so that the circuit-current flows through it. When ... silver and silver alloys are used of lower ratings. Copper alloys are used in fuses of higher ratings.

Give four examples of natural insulating materials.

Description : Give four examples of natural insulating materials.

Last Answer : Ans: Examples of the natural insulating materials are cotton, rubber, wood, mica.

Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Description : Tick of the property, which is different from the group (A) Ductility. (B) Resistivity. (C) Tensile strength. (D) Hardness.

Last Answer : (B) Resistivity

Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Description : Property of material which allows it to be drawn out into wires is (A) Ductility. (B) Solder ability. (C) Super conductivity. (D) Malleability.

Last Answer : (A) Ductility.

Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Description : Hysteresis loss least depends on (A) Frequency. (B) Magnetic field intensity. (C) Volume of the material. (D) Grain orientation of material.

Last Answer : (D) Grain orientation of material.

Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Description : Mica is a (A) Dielectric material. (B) Insulating material. (C) Magnetic material. (D) Both insulating and dielectric material.

Last Answer : (D) Both insulating and dielectric material.

A pure semiconductor under ordinary conditions behaves like (A) a conductor. (B) an insulator. (C) a magnetic material. (D) a ferro-electric material.

Description : A pure semiconductor under ordinary conditions behaves like (A) a conductor. (B) an insulator. (C) a magnetic material. (D) a ferro-electric material.

Last Answer : (B) an insulator.

If a ferromagnetic material is heated upto Curie temperature, it becomes

Description : If a ferromagnetic material is heated upto Curie temperature, it becomes (a) Permanent magnet (b) Anti-ferromagnetic material (c) Diamagnetic material (d) Paramagnetic material 

Last Answer : Paramagnetic material

When the temperature of a ferromagnetic material exceeds the Curie temperature, it behaves similar to a

Description : When the temperature of a ferromagnetic material exceeds the Curie temperature, it behaves similar to a 

Last Answer : When the temperature of a ferromagnetic material exceeds the Curie temperature, it behaves similar to a Diamagnetic material

The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and its electrical conductivity & specific heat also changes, is called the 'Curie point', which is __________ °C. (A) 768 (B) 908 (C) 1400 (D) 1539

Description : The temperature at which the magnetic property of iron disappears (i.e., it becomes non-magnetic) and its electrical conductivity & specific heat also changes, is called the 'Curie point', which is __________ °C. (A) 768 (B) 908 (C) 1400 (D) 1539

Last Answer : Option A

Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Description : Semi-conductors have ________ temperature coefficient of resistance. (A) Negative (B) Positive (C) Both positive and negative (D) None of the above

Last Answer : (A) Negative

The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Description : The conductivity of an extrinsic semiconductor (A) decreases with temperature. (B) increases with temperature. (C) remains constant with temperature. (D) decreases and then increases with temperature.

Last Answer : (B) increases with temperature.

Resistivity of conductors is most affected by (A) composition. (B) temperature. (C) pressure. (D) current.

Description : Resistivity of conductors is most affected by (A) composition. (B) temperature. (C) pressure. (D) current.

Last Answer : (B) temperature.

Thermocouples are used for the measurement of (A) humidity. (B) pressure. (C) temperature. (D) density.

Description : Thermocouples are used for the measurement of (A) humidity. (B) pressure. (C) temperature. (D) density.

Last Answer : (C) temperature.

Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.

Description : Which of the following material has the highest melting point (A) Copper. (B) Aluminium. (C) Tungsten. (D) Gold.

Last Answer : (C) Tungsten.

Phenol and Formaldehyde are polymerised to a resultant product known as (A) PVC. (B) bakelite. (C) polyester. (D) teflon.

Description : Phenol and Formaldehyde are polymerised to a resultant product known as (A) PVC. (B) bakelite. (C) polyester. (D) teflon.

Last Answer : (B) bakelite.

The magnetic field which destroys the superconductivity is called a) Diamagnetic field b) Ferromagnetic field c) Ferrimagnetic field d) Critical field

Description : The magnetic field which destroys the superconductivity is called a) Diamagnetic field b) Ferromagnetic field c) Ferrimagnetic field d) Critical field

Last Answer : d) Critical field

All semiconductors in their last orbit have (A) 8 electrons. (B) 2 electrons. (C) 4 electrons. (D) 6 electrons.

Description : All semiconductors in their last orbit have (A) 8 electrons. (B) 2 electrons. (C) 4 electrons. (D) 6 electrons.

Last Answer : (C) 4 electrons.

In which materials the magnetic anisotropy is followed? a) Diamagnetic b) Paramagnetic c) Ferromagnetic d) Ferromagnetic

Description : In which materials the magnetic anisotropy is followed? a) Diamagnetic b) Paramagnetic c) Ferromagnetic d) Ferromagnetic

Last Answer : c) Ferromagnetic

The following type of bonding is strongly directional in solids. (A) Vander Waal's (B) Ionic (C) Metallic (D) Covalent

Description : The following type of bonding is strongly directional in solids. (A) Vander Waal's (B) Ionic (C) Metallic (D) Covalent

Last Answer : D) Covalent

What is a modular system? List the important properties of a modular system.

Description : What is a modular system? List the important properties of a modular system.

Last Answer : Ans: A modular system consists of well defined manageable units to well defined interfaces among them. Desirable properties are Each module is a well defined subsystem useful to others Each module ... modules Modules should be easier to use than build Modules should have a simple interface

Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Description : Tick off the material, which is different from the group (A) Constantan. (B) Manganin. (C) Nichrome. (D) Brass.

Last Answer : (D) Brass.

Atoms with four valence electrons are good conductors. (A) True (B) False

Description : Atoms with four valence electrons are good conductors. (A) True (B) False

Last Answer : (B) False

Insulators have (A) A full valence band. (B) An empty conduction band. (C) A large energy gap. (D) All the above.

Description : Insulators have (A) A full valence band. (B) An empty conduction band. (C) A large energy gap. (D) All the above.

Last Answer : (C) A large energy gap.

Paper is hygroscopic and absorbent. (A) True (B) False

Description : Paper is hygroscopic and absorbent. (A) True (B) False

Last Answer : (A) True

Addition of trivalent impurity to a semiconductor creates many (A) holes. (B) free electrons. (C) valance electrons. (D) bound electrons.

Description : Addition of trivalent impurity to a semiconductor creates many (A) holes. (B) free electrons. (C) valance electrons. (D) bound electrons.

Last Answer : (B) free electrons.

Hall effect is associated with (A) Conductors. (B) Semiconductors. (C) Thermistors. (D) Solders.

Description : Hall effect is associated with (A) Conductors. (B) Semiconductors. (C) Thermistors. (D) Solders.

Last Answer : (B) Semiconductors.

Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Description : Example of high resistivity material is (A) Nichrome (B) Silver (C) Gold (D) Copper

Last Answer : (A) Nichrome

A transistor has (A) One p-n junction. (B) Two p-n junction. (C) Four p-n junction. (D) Five p-n junction.

Description : A transistor has (A) One p-n junction. (B) Two p-n junction. (C) Four p-n junction. (D) Five p-n junction.

Last Answer : (B) Two p-n junction.

Bronze is an alloy of (A) Copper and Tin. (B) Copper and Steel. (C) Copper and Mercury. (D) Copper and Aluminium.

Description : Bronze is an alloy of (A) Copper and Tin. (B) Copper and Steel. (C) Copper and Mercury. (D) Copper and Aluminium.

Last Answer : (A) Copper and Tin.