Which of the following software is/are used for design and manufacturing? (a) CAD (b) C.DA and CAM (c) CAM (d) Both (a) and (c) -Technology

Which of the following software is/are used for design and manufacturing? (a) CAD (b) C.DA and CAM (c) CAM (d) Both (a) and (c) -Technology
by

1 Answer

Answer :

(d) CAD and CAM are the two important software used in designing and manufacturing. Using CAD, designers can developed more detailed design and the final design can be combined with CAM.
by

Related questions

CAD/CAM is the relationship between a.science and engineering b.manufacturing and marketing c.design and manufacturing d.design and marketing

Description : CAD/CAM is the relationship between a.science and engineering b.manufacturing and marketing c.design and manufacturing d.design and marketing

Last Answer : c.design and manufacturing

A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Description : A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Last Answer : b.Computer Aided Design (CAD)

Input of RP data is ______ a.CAM data b.CAPP data c.CAD data d.All of the above

Description : Input of RP data is ______ a.CAM data b.CAPP data c.CAD data d.All of the above

Last Answer : c.CAD data

Which two disciplines are tied by a common database? a.documentation and geometric modeling b.CAD and CAM c.drafting and documentation d.none of the mentioned

Description : Which two disciplines are tied by a common database? a.documentation and geometric modeling b.CAD and CAM c.drafting and documentation d.none of the mentioned

Last Answer : b.CAD and CAM

Which of the following is least important in design during rapid prototyping? a.Machine size b.Tolerance c.Material d.CAD software

Description : Which of the following is least important in design during rapid prototyping? a.Machine size b.Tolerance c.Material d.CAD software

Last Answer : b.Tolerance

____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Description : ____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Last Answer : b.Rapid prototyping

In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Description : In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Last Answer : d.Stereolithography

From following, the alternative name for RP is ________ a.Additive Manufacturing b.Layer Manufacturing c.Direct CAD Manufacturing d.All of the above

Description : From following, the alternative name for RP is ________ a.Additive Manufacturing b.Layer Manufacturing c.Direct CAD Manufacturing d.All of the above

Last Answer : d.All of the above

Laminated Object Manufacturing (LOM) is developed by_______ a.Stratasys b.CAM-LEM c.Kira Corporation d.Cubic Technologies

Description : Laminated Object Manufacturing (LOM) is developed by_______ a.Stratasys b.CAM-LEM c.Kira Corporation d.Cubic Technologies

Last Answer : d.Cubic Technologies

use demorgan's theorem to simplify the following expressions : (bd')(a'+c'd)+(bc'+d'a) -Technology

Description : use demorgan's theorem to simplify the following expressions : (bd')(a'+c'd)+(bc'+d'a) -Technology

Last Answer : This answer was deleted by our moderators...

Using demorgan's theorems simplify f'=b'd(A'+c'd)+(bc'+d'a) -Technology

Description : Using demorgan's theorems simplify f'=b'd(A'+c'd)+(bc'+d'a) -Technology

Last Answer : This answer was deleted by our moderators...

A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Description : A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Last Answer : d.Virtual Prototype

what is meant by robust, modular and computer aided design (CAD)?

Description : what is meant by robust, modular and computer aided design (CAD)?

Last Answer : Location strategy is one of the important key decisions in operations management. What arethe major factors that firms consider when choosing a country in which to locate? What isfactor rating method and how it supports location decision?

CAD stands for A) Computer aided design B) Computer algorithm for design C) Computer application in design D) All of the above

Description : CAD stands for A) Computer aided design B) Computer algorithm for design C) Computer application in design D) All of the above

Last Answer : Answer : A

CAD stands for: a) Computer And Development b) Computer Aided Design c) Computer Access Design d) Computer Access Development e) None of These

Description : CAD stands for: a) Computer And Development b) Computer Aided Design c) Computer Access Design d) Computer Access Development e) None of These

Last Answer : b) Computer Aided Design

CAD stands for: a) Computer Assisted Design b) Computer Aided Design c) Computer Application Design d) None of These

Description : CAD stands for: a) Computer Assisted Design b) Computer Aided Design c) Computer Application Design d) None of These

Last Answer : b) Computer Aided Design

CAD stands for a. Computer aided design b. Computer algorithm for design c. Computer application in design d. All of the above

Description : CAD stands for a. Computer aided design b. Computer algorithm for design c. Computer application in design d. All of the above

Last Answer : a. Computer aided design

CAD stands for a. Computer aided design b. Computer algorithm for design c. Computer application in design d. All of the above

Description : CAD stands for a. Computer aided design b. Computer algorithm for design c. Computer application in design d. All of the above

Last Answer : a. Computer aided design

Why would Cisco kill the Flip cam?

Description : Why would Cisco kill the Flip cam?

Last Answer : answer:I have a flip and I haven’t used it for a while. I found that it was more practical to have one device that does it all instead of carrying many. http://mashable.com/2011/04/12/rip-flip-camera/

Which digital tough camera or tough cam do you recommend?

Description : Which digital tough camera or tough cam do you recommend?

Last Answer : Instead of shopping for an underwater camera for $300 which, all you will find are cheap disposables, buy an underwater case for your camera. Since you didn't say what camera you have now, I' ... //www.otterbox.com/ & here is another site that sells waterproof cases. http://www.waterproofcases.net/

Which CAD software cannot be used to create data for the prototyping machine? a.CREO b.CATIA c.NX Unigraphics d.Adobe Illustrator

Description : Which CAD software cannot be used to create data for the prototyping machine? a.CREO b.CATIA c.NX Unigraphics d.Adobe Illustrator

Last Answer : d.Adobe Illustrator

What is CAD Software ?

Description : What is CAD Software ?

Last Answer : : CAD software is a type of designable software that facilitates the development of data, including the necessary drawing design drawings at various data inputs, to provide a platform for action.

What is CAD Software ?

Description : What is CAD Software ?

Last Answer : : CAD software is a type of designable software that facilitates the development of data, including the necessary drawing design drawings at various data inputs, to provide a platform for action.

What occupations use CAD software?

Description : What occupations use CAD software?

Last Answer : CAD software is used in a variety of fields. Everything from land surveying, to engineering, building design to construction all use some kind of CAD software in their occupations.

What is the purpose of 3d cad software programs?

Description : What is the purpose of 3d cad software programs?

Last Answer : The purpose of 3d cad software programs is for computer drawing, 3D modelling and realistic creation. You can read about this program at www.freebyte.com/cad/cad.htm

What does cad software stand for?

Description : What does cad software stand for?

Last Answer : CAD stands for computer-aided design and drafting (CADD). It is technology for design and technical documentation, it is the use of computers to aid in the creation ,modification, analysis of a design.

Software used for reverse engineering after 3D scanning is a. Maya b. 3D Max c. CAD d. all of the above

Description : Software used for reverse engineering after 3D scanning is a. Maya b. 3D Max c. CAD d. all of the above

Last Answer : c. CAD

‘Bachpan Toys’ is a small company manufacturing toys. They have decided that it -Technology

Description : ‘Bachpan Toys’ is a small company manufacturing toys. They have decided that it -Technology

Last Answer : Benefits from the Website are as follows :1. Customers can buy toys anywhere and anytime because Internet is online 24 hours a day, 7 days a week.2. With a Website, customers can easily access information about the toys.3. Business Website is the potential for reaching a wider audience.

ASIC chip is A. Simple in design. B. Manufacturing time is less. C. It is faster. D. Both A&C.

Description : ASIC chip is A. Simple in design. B. Manufacturing time is less. C. It is faster. D. Both A&C.

Last Answer : C. It is faster. 

What is the difference between cold booting and warm booting: a) Cold Booting uses a floppy for booting while warm booting uses a hard disk for booting b) Cold booting is starting the computer from the power off position and warmbooting is the restarting the computer with CAD command or reset button when ithangs c) Both of The Above d) None of The Above

Description : What is the difference between cold booting and warm booting: a) Cold Booting uses a floppy for booting while warm booting uses a hard disk for booting b) Cold booting is starting the computer from the power ... CAD command or reset button when it hangs c) Both of The Above d) None of The Above

Last Answer : b) Cold booting is starting the computer from the power off position and warm booting is the restarting the computer with CAD command or reset button when it hangs

CAD stands for: a. Computer aided drafting b. Compare aided drafting c. Both A and B d. None of these

Description : CAD stands for: a. Computer aided drafting b. Compare aided drafting c. Both A and B d. None of these

Last Answer : a. Computer aided drafting

What software (platform, utility, whatever) is used to design Q & A websites like this one?

Description : What software (platform, utility, whatever) is used to design Q & A websites like this one?

Last Answer : This site is written in Python and uses the Django framework.

How do I learn about design for manufacturing?

Description : How do I learn about design for manufacturing?

Last Answer : Grab a copy of THE reference book Machinery's Handbook. If you do anything with mechanical engineering or metalworking, Machinery's Handbook is about as close to holy scripture as you can get in the industry ... are things in there that I never would've guessed even after a few years as a machinist.

Secondary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Description : Secondary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Last Answer : c.Production operation type & sequence

Supplementary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Description : Supplementary code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Last Answer : b.Manufacturing attributes

Form code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Description : Form code of the Opitz system is for_________ a.Design attributes b.Manufacturing attributes c.Production operation type & sequence d.Maintenance flow

Last Answer : a.Design attributes

____ is the bridge between design and manufacturing a.Production planning b.Process Planning c.Product design d.None of the above

Description : ____ is the bridge between design and manufacturing a.Production planning b.Process Planning c.Product design d.None of the above

Last Answer : b.Process Planning

What part of the manufacturing process relate to each stage of the process and to the process as a whole? a) field service b) design c) distribution d) project management

Description : What part of the manufacturing process relate to each stage of the process and to the process as a whole? a) field service b) design c) distribution d) project management

Last Answer : d) project management

Which stage of the manufacturing process has been described as “the mapping of function onto form”? a) Design b) Distribution c) Project management d) Field service

Description : Which stage of the manufacturing process has been described as “the mapping of function onto form”? a) Design b) Distribution c) Project management d) Field service

Last Answer : a) Design

The major limitation of metallic recuperated is ------- a) Limitation of handling COx, NOx etc. b) Limitation of reduced life for handling temperature more than 1000 oC c) Manufacturing difficulty of the required design d) None of the above

Description : The major limitation of metallic recuperated is ------- a) Limitation of handling COx, NOx etc. b) Limitation of reduced life for handling temperature more than 1000 oC c) Manufacturing difficulty of the required design d) None of the above

Last Answer : Limitation of reduced life for handling temperature more than 1000 oC

The degree to which the design specifications are followed during manufacturing is known as a) Quality of design b) Quality of conformance c) Quality of testing d) None of the mentioned

Description : The degree to which the design specifications are followed during manufacturing is known as a) Quality of design b) Quality of conformance c) Quality of testing d) None of the mentioned

Last Answer : Ans: b

Degree to which design specifications are followed in manufacturing the product is called a) Quality Control b) Quality of conformance c) Quality Assurance d) None of the mentioned

Description : Degree to which design specifications are followed in manufacturing the product is called a) Quality Control b) Quality of conformance c) Quality Assurance d) None of the mentioned

Last Answer : Ans: b

Write the steps to design a database. -Technology

Description : Write the steps to design a database. -Technology

Last Answer : Steps to Design a DatabaseThere are various steps to design a database which are as follows:Step 1 Determine the purpose of your database The first step of designing a database is to determine the ... that the database structure meets the goals you needed, add all your existing data to the tables.

What are two areas of the Design View of the table? -Technology

Description : What are two areas of the Design View of the table? -Technology

Last Answer : Field description and Field properties.

What are Datasheet View and Design View? -Technology

Description : What are Datasheet View and Design View? -Technology

Last Answer : In MS-Access 2007, two types of views are available to create a table as follows:1. Datasheet View It provides a visual way to create a table. It is a simple view which arranges the ... available properties for each field and can open existing tables in Design View, add, remove or change fields.

What is the purpose of the description column in table Design View? -Technology

Description : What is the purpose of the description column in table Design View? -Technology

Last Answer : (a) A Design View of the table provides three columns as Field Name, Data Type, and Description. The description column provides the facility to write the description about Field Name.

Design View allows users to enter data in the table. -Technology

Description : Design View allows users to enter data in the table. -Technology

Last Answer : False Because Design View is used to edit the table design only.

XML is design to describe data. -Technology

Description : XML is design to describe data. -Technology

Last Answer : True The focus of XML is on the description of data, not its presentation.

Seema wants to give identical design to all the slides and handouts, she is going to print from her presentation. -Technology

Description : Seema wants to give identical design to all the slides and handouts, she is going to print from her presentation. -Technology

Last Answer : 1. Seema can do this in following two ways:(a) Creating same design on each slide and handouts manually.(b) Using slide master and handout master.2. In the first method , the efforts are ... design may creep in. The second method ensures reduce efforts and identical design on each slide and handout.

Ms. Achla, works as a Programmer in a survey firm named “National Survey Foundation”. In her current project, she is supposed to design -Technology

Description : Ms. Achla, works as a Programmer in a survey firm named “National Survey Foundation”. In her current project, she is supposed to design -Technology

Last Answer : S. No.Control used to inputControl1TRAINEE’S NAMETextField2TRAINING LOCATIONRadio Button/Combo Box3GRADE THE SESSION(Excellent, Good, Satisfactory, Unsatisfactory)Radio Button/Combo Box4SUGGESTIONSText Area