Name the section into which an Iron and Steel plant can be divided. -SST 10th

Name the section into which an Iron and Steel plant can be divided. -SST 10th
by

1 Answer

Answer :

An Iron and Steel plant can be divided into the four sections: (i) Raw materials processing area. (ii) Blast furnaces. (iii) Steel melting furnaces. (iv) Rolling mills.
by

Related questions

Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete

Description : Soap kettle used in the production of laundry soap is made of (A) Steel with top section nickel clad or stainless steel (B) Cast iron (C) Nickel (D) Concrete

Last Answer : (A) Steel with top section nickel clad or stainless steel

State two geographical factors which were taken into consideration for the setting Up of the Durgapur Iron and Steel Plant. -SST 10th

Description : State two geographical factors which were taken into consideration for the setting Up of the Durgapur Iron and Steel Plant. -SST 10th

Last Answer : (i) Raw material availability and excellent transport facilities. (ii) Declining raw material.

Locate and label the following items on the same map with appropriate symbols. (i) Nuclear Power Plant - Kalpakkam (ii) Iron and Steel Plant - Bhilai (iii) International Airport - Netaji Subhash Chandra Bose -SST 10th

Description : Locate and label the following items on the same map with appropriate symbols. (i) Nuclear Power Plant - Kalpakkam (ii) Iron and Steel Plant - Bhilai (iii) International Airport - Netaji Subhash Chandra Bose -SST 10th

Last Answer : Map of India

Locate and label the following items on the same map with appropriate symbols. (i) Uran thermal plant (ii) Rourkela Iron Steel plant (iii) Kandla sea port -SST 10th

Description : Locate and label the following items on the same map with appropriate symbols. (i) Uran thermal plant (ii) Rourkela Iron Steel plant (iii) Kandla sea port -SST 10th

Last Answer : Political map of India

What is the ‘speciality’ of Visvesvaraya Iron and Steel Plant? -SST 10th

Description : What is the ‘speciality’ of Visvesvaraya Iron and Steel Plant? -SST 10th

Last Answer : (i) It produces special Steel and alloy. (ii) Mahatma Gandhi HEP station and Sharavati HEP station supply electricity to this plant on a large scale.

Give two reasons favouring the location of Iron and Steel Plant in north-eastern Deccan. -SST 10th

Description : Give two reasons favouring the location of Iron and Steel Plant in north-eastern Deccan. -SST 10th

Last Answer : (i) Availability of iron ore, manganese, coal, limestone in close nearness since transportation of these bulky material would require a lot of money. (ii) Iron and Steel industry is a labour intensive industry. Jharkhand, Bihar and U. P. of India are densely populated and cheap labour available.

The foreign collaborator of the iron and steel plant at Durgapur. -SST 10th

Description : The foreign collaborator of the iron and steel plant at Durgapur. -SST 10th

Last Answer : British Company.

Where is Visvesvaraya Iron and Steel Limited located ? How has this steel plant overcome the -Geography

Description : Where is Visvesvaraya Iron and Steel Limited located ? How has this steel plant overcome the -Geography

Last Answer : Visvesvaraya Iron and Steel Ltd. is located at Bhadrawati on the banks of river Bhadrawati in Shimoga district of Karnataka. This steel plant has overcome the disadvantage of not being located ... and using it for smelting. Now, it uses hydroelectric power obtained from Sharavati Power Project.

(a) 1. Name the private sector iron and steel plant of India. [2] 2. From where does it get its supply of: 1. Iron ore 2. Manganese 3. Coal? -Geography

Description : (a) 1. Name the private sector iron and steel plant of India. [2] 2. From where does it get its supply of: 1. Iron ore 2. Manganese 3. Coal? -Geography

Last Answer : 1. Tata Iron and Steel Industry, Jamshedpur. 2. 1. Iron Ore: Singhbhum, Mayurbhanj. 2. Manganese: Noamundi. 3. Coal: Jharia.

Mention two advantages that a mini steel plant has over an integrated iron and steel plant. -Geography

Description : Mention two advantages that a mini steel plant has over an integrated iron and steel plant. -Geography

Last Answer : Advantages of Mini steel plants are: 1. They use the electric arc furnace and thus conserve coal. 2. They require small capital investment. 3. They cater to the local need of the market and the cost of transport is reduced.

(i) Name an iron and steel plant which was established with British collaboration. -Geography

Description : (i) Name an iron and steel plant which was established with British collaboration. -Geography

Last Answer : (i) Products made from petrochemicals are growing in popularity because they are cost effective, economically stable and do not depend on agricultural raw material. (ii) A heavy ... , information technology, software industry, medical sciences and defence to develop with electronic apparatus.

Name one integrated iron and steel plant in the private sector. Where does it obtain its iron and coal from ? -Geography

Description : Name one integrated iron and steel plant in the private sector. Where does it obtain its iron and coal from ? -Geography

Last Answer : Integrated steel plant in private sector is Tata Iron and Steel Company (TISCO). It obtains its iron from Singhbhum and Mayurbhanj and coal from Jharia.

With reference to the Bokaro Steel Plant, from where does it get its (i) coal (ii) iron ore (iii) water supply ? -Geography

Description : With reference to the Bokaro Steel Plant, from where does it get its (i) coal (ii) iron ore (iii) water supply ? -Geography

Last Answer : (i) Coal from Bokaro and Jharia coal fields. (ii) Iron ore from Bonaigarh, Kiriburu and Noamundi in Orissa. (iii) Water supply from River Damodar.

(i) Mention two characteristics of a mini steel plant. (ii) From where does the integrated steel plant at Jamshedpur get its iron ore and coal ? -Geography

Description : (i) Mention two characteristics of a mini steel plant. (ii) From where does the integrated steel plant at Jamshedpur get its iron ore and coal ? -Geography

Last Answer : (i) Two characteristics of a mini steel plant are : 1. They use cheaply available scrap iron. 2. They use electric furnaces therefore cause no pollution. (ii) Jamshedpur plant get its iron ore from Singhbhum and Mayurbhanj. It get its coal from Jharia and Raniganj.

Name an iron and steel plant of Tamil Nadu. -Geography

Description : Name an iron and steel plant of Tamil Nadu. -Geography

Last Answer : India is the fourth largest producer of crude steel. The steel plants are mainly concentrated in Jharkhand and West Bengal region. Salem Steel Plant is in Tamil Nadu.

The Rourkela steel plant obtains: 1. hydel power from the Hirakud dam 2. coking coal from Jharia coalfields 3. iron ore from Baba Budan hills (a) I, II and III (b) I and II (c) I and III (d) II and III

Description : The Rourkela steel plant obtains: 1. hydel power from the Hirakud dam 2. coking coal from Jharia coalfields 3. iron ore from Baba Budan hills (a) I, II and III (b) I and II (c) I and III (d) II and III

Last Answer : Ans: (d)

Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood

Description : Sulphur melting pit in the sulphuric acid plant is made of (A) Lead lined stainless steel (B) Cast iron (C) Steel or cement-brick lined (D) Hard wood

Last Answer : (C) Steel or cement-brick lined

The digester of a Gobar gas plant is a (A) Mild steel drum (B) Stainless steel vessel (C) Masonry well (D) Cast iron vessel

Description : The digester of a Gobar gas plant is a (A) Mild steel drum (B) Stainless steel vessel (C) Masonry well (D) Cast iron vessel

Last Answer : (C) Masonry well

Irradiation of water by ultraviolet light of suitable wavelength iscommonly used for disinfection of water in (A) Food industry (B) Municipal sewage treatment (C) Petroleum refinery (D) Iron & steel plant

Description : Irradiation of water by ultraviolet light of suitable wavelength iscommonly used for disinfection of water in (A) Food industry (B) Municipal sewage treatment (C) Petroleum refinery (D) Iron & steel plant

Last Answer : (A) Food industry

__________ plant emits large amount of SO2 as an air pollutant. (A) Nitric acid (B) Sulphuric acid (C) Chlor alkali (D) Iron & steel

Description : __________ plant emits large amount of SO2 as an air pollutant. (A) Nitric acid (B) Sulphuric acid (C) Chlor alkali (D) Iron & steel

Last Answer : (B) Sulphuric acid

In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace, producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 TPD GCV of coal : 4500 kcal/kg Power Purchased from Grid : 82400 kWh / day Specific Energy consumption for Kiln producing Sponge Iron: 120 kWh / ton sponge iron Calculate the following 1. Specific Energy Consumption of Induction melting furnace in terms of kWh/ton of molten steel 2. Specific Energy Consumption of the entire plant, in terms of kcal/kg of molten steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Description : In a 100 TPD Sponge Iron plant, the sponge iron is fed to the Induction melting furnace,  producing molten steel at 88% yield. The Energy consumption details are as follows: Coal Consumption : 130 ... molten  steel (product). 3. Total Energy Consumption of Plant in Tons of Oil Equivalent (TOE )

Last Answer :  a) Specific Energy Consumption of Induction Melting Furnace  Molten Steel Production from the Induction melting furnace per day  = 100 x 88/100 = 88 TPD Total Energy Consumption of the Plant = 82400 kWh ... mark c) Total Energy consumption of Plant in ToE  = 655864000/107  = 65.586 ToE

1. Which is India’s oldest iron and steel plant? 2. Belladona medicine is obtained by which part of Atropa belladona? 3. To whom does UPSC submit its annual report on its work? 4. Which city in india never experiences Vertical rays of the sun during noon? 5. By whom was the ‘Jaziya’ abolished?

Description : 1. Which is India's oldest iron and steel plant? 2. Belladona medicine is obtained by which part of Atropa belladona? 3. To whom does UPSC submit its annual report on its work? 4. ... 19. Where is the greatest average annual precipitation? 20. Alberuni lived during the period of which king?

Last Answer : Answer : 1. TISCO at Jamshedpur 2. From leaf 3. The Union Home Minister 4. New Delhi 5. Akbar 6. Due to absence of gravity 7. 1975 8. 2009 9. Cyclonic 10. Shahjahan 11. Cycus 12. British ... 15. Copper-stone Age 16. Jute and Cotton 17. Gully 18. Dolomite 19. In Philippines 20. Mahmud Ghaznavi

determining stresses in frames by methods of sections, the frame is divided into two parts by an imaginary section drawn in such a way as not to cut more than (A) Two members with unknown forces of the frame (B) Three members with unknown forces of the frame (C) Four members with unknown forces of the frame (D) Three members with known forces of the frame

Description : determining stresses in frames by methods of sections, the frame is divided into two parts by an imaginary section drawn in such a way as not to cut more than (A) Two members with unknown forces ... C) Four members with unknown forces of the frame (D) Three members with known forces of the frame

Last Answer : (B) Three members with unknown forces of the frame

square cross section b/h/h'=400/400/40mm with a reinforcement ratio of p=0.015 is loaded for action forces of axial load plus uniaxial bending.the column is to be made of C25/30 concrete & S-460 steel.check whether the column AB is short or long?

Description : square cross section b/h/h'=400/400/40mm with a reinforcement ratio of p=0.015 is loaded for action forces of axial load plus uniaxial bending.the column is to be made of C25/30 concrete & S-460 steel.check whether the column AB is short or long?

Last Answer : 10001/999900

A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The extension in the rod was 1 mm only. If Esteel = 2 × 106 kg/cm2 , the side of the rod, is (A) 1 cm (B) 1.5 cm (C) 2 cm (D) 2.5 cm

Description : A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The  extension in the rod was 1 mm only. If Esteel = 2 × 106  kg/cm2 , the side of the rod, is  (A) 1 cm  (B) 1.5 cm  (C) 2 cm  (D) 2.5 cm 

Last Answer : (C) 2 cm 

If a concrete column 200 × 200 mm in cross-section is reinforced with four steel bars of 1200 mm2 total cross-sectional area. Calculate the safe load for the column if permissible stress in concrete is 5 N/mm2 and Es is 15 Ec (A) 264 MN (B) 274 MN (C) 284 MN (D) 294 MN

Description : If a concrete column 200 200 mm in cross-section is reinforced with four steel bars of 1200  mm2  total cross-sectional area. Calculate the safe load for the column if permissible stress in  concrete is 5 N/mm2 ... 15 Ec (A) 264 MN  (B) 274 MN  (C) 284 MN  (D) 294 MN 

Last Answer : (C) 284 MN 

A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that of brass bar is 3000 mm2 . These are subjected to a compressive load 100,000 N. If Eb = 0.2 MN/mm2 and Eb = 0.1 MN/mm2 , the stresses developed are: (A) b = 10 N/mm2s = 20 N/mm2(B) b = 8 N/mm2s = 16 N/mm2(C) b = 6 N/mm2s = 12 N/mm2(D) b = 5 N/mm2s = 10 N/mm

Description : A compound bar consists of two bars of equal length. Steel bar cross-section is 3500 mm2 and that  of brass bar is 3000 mm2 . These are subjected to a compressive load 100,000 N. If Eb = 0.2  MN/mm2  and Eb = 0.1 ... 6 N/mm2 s  = 12 N/mm2 (D) b = 5 N/mm2 s  = 10 N/mm

Last Answer : (A) b = 10 N/mm2 s  = 20 N/mm

A standard steel tape of length 30 m and cross-section 15 × 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of steel tape is 2.2 × 106 kg/cm2 , the correction to be applied is (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Description : A standard steel tape of length 30 m and cross-section 15 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of ... (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Last Answer : (A) - 0.000909 m

If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is (A) 37 cm (B) 38 cm (C) 39 cm (D) 40 cm

Description : If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is (A) 37 cm (B) 38 cm (C) 39 cm (D) 40 cm

Last Answer : Answer: Option D

A short column 20 cm × 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on the column, should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these

Description : A short column 20 cm 20 cm in section is reinforced with 4 bars whose area of cross section is 20 sq. cm. If permissible compressive stresses in concrete and steel are 40 kg/cm2 and 300 kg/cm2 , the Safe load on ... should not exceed (A) 4120 kg (B) 41,200 kg (C) 412,000 kg (D) None of these

Last Answer : Answer: Option B

In a singly reinforced beam, if the permissible stress in concrete reaches earlier than that in steel, the beam section is called (A) Under-reinforced section (B) Over reinforced section (C) Economic section (D) Critical section

Description : In a singly reinforced beam, if the permissible stress in concrete reaches earlier than that in steel, the beam section is called (A) Under-reinforced section (B) Over reinforced section (C) Economic section (D) Critical section

Last Answer : Answer: Option B

An under-reinforced section means (A) Steel is provided at the underside only (B) Steel provided is insufficient (C) Steel provided on one face only (D) Steel will yield first

Description : An under-reinforced section means (A) Steel is provided at the underside only (B) Steel provided is insufficient (C) Steel provided on one face only (D) Steel will yield first

Last Answer : Answer: Option D

The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stresses simultaneously, is called (A) Balanced sectionB) Economic section (C) Critical section (D) All the above

Description : The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stresses simultaneously, is called (A) Balanced section B) Economic section (C) Critical section (D) All the above

Last Answer : Answer: Option D

If Ac , Asc and A are areas of concrete, longitudinal steel and section of a R.C.C. column and m and c are the modular ratio and maximum stress in the configuration of concrete, the strength of column is (A) cAc + m cAsc (B) c (A - Asc) + m cAsc (C) c [A + (m - 1)ASC] (D) All the above

Description : If Ac , Asc and A are areas of concrete, longitudinal steel and section of a R.C.C. column and m and c are the modular ratio and maximum stress in the configuration of concrete, the strength of column is (A) cAc + m cAsc (B) c (A - Asc) + m cAsc (C) c [A + (m - 1)ASC] (D) All the above

Last Answer : Answer: Option D

Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's law is equally applicable to concrete as well as to steel (C) Variation of stress in reinforcement due to changes in external loading is negligible (D) All the above

Description : Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's ... of stress in reinforcement due to changes in external loading is negligible (D) All the above

Last Answer : Answer: Option D

If the permissible compressive and tensile stresses in a singly reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage area At of the steel required for an economic section, is (A) 0.496 % (B) 0.596 % (C) 0.696 % (D) 0.796 %

Description : If the permissible compressive and tensile stresses in a singly reinforced beam are 50 kg/cm2 and 1400 kg/cm2 respectively and the modular ratio is 18, the percentage area At of the steel required for an economic section, is (A) 0.496 % (B) 0.596 % (C) 0.696 % (D) 0.796 %

Last Answer : Answer: Option C

If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Description : If At is the area of steel cross-section, t is working stress, L is width of road and W is weight of slab per square metre, the spacing of the tie bars for a longitudinal joint, is (A) (100 At × t)/WL (B) 100 At/tWL (C) (100 WAt × t)/tL (D) 100 WL/At t

Last Answer : Answer: Option D

If the permissible stress in steel in tension is 140 N/mm², then the depth of neutral axis for a singly reinforced rectangular balanced section will be (A) 0.35 d (B) 0.40 d (C) 0.45 d (D) Dependent on grade of concrete also

Description : If the permissible stress in steel in tension is 140 N/mm², then the depth of neutral axis for a singly reinforced rectangular balanced section will be (A) 0.35 d (B) 0.40 d (C) 0.45 d (D) Dependent on grade of concrete also

Last Answer : Answer: Option B

Consider the following statements: Percentage of steel for balanced designed of a singly reinforced rectangular section by limit state method depends on (1) Characteristic strength of concrete (2) Yield strength of concrete (3) Modulus of elasticity of steel (4) Geometry of the section. Which of these statements are correct? (a) 2, 3 and 4 (b) 1, 3 and 4 (c) 1, 2 and 4 (d) 1, 2 and 3

Description : Consider the following statements: Percentage of steel for balanced designed of a singly reinforced rectangular section by limit state method depends on (1) Characteristic strength of concrete (2) Yield strength of concrete (3) Modulus of elasticity ... (b) 1, 3 and 4 (c) 1, 2 and 4 (d) 1, 2 and 3

Last Answer : 1,2,4

The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending strength and axial yield strength of material (c) Buckling strength based on the net area of the section and percentage elongation at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Description : The most critical consideration in the design of a rolled steel column carrying axial loads is the (a) Percentage elongation at yield and the net cross-sectional area (b) Critical bending ... at ultimate load (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Last Answer : (d) Compressive strength based on slenderness ratio and gross cross-sectional area.

Which of the following steel sections should preferably be used at places where torsion occurs? (a) Box-type section (b) Channel section (c) Angle section (d) Any of the above

Description : Which of the following steel sections should preferably be used at places where torsion occurs? (a) Box-type section (b) Channel section (c) Angle section (d) Any of the above

Last Answer : (a) Box-type section

Regarding the working stress design of under reinforced concrete section, (a) The neutral axis depth will be greater than that of a balanced section. (b) The stress in steel intension will reach its maximum permissible value first. (c) The moment of resistance will be less than that of the balanced section. (d) The concrete on the tension side is also be considered for calculating the moment of resistance of the section.

Description : Regarding the working stress design of under reinforced concrete section, (a) The neutral axis depth will be greater than that of a balanced section. (b) The stress in steel intension will reach ... on the tension side is also be considered for calculating the moment of resistance of the section.

Last Answer : both b&c

The effective depth of a singly reinforced rectangular beam is 300mm. the section is over-reinforced and the neutral axis is 120mm below the top. If the maximum stress attained by concrete is 5N/mn2 and the modular ratio is 18, then the stress developed in the steel will (a) 130N/mm2 (b) 135N/mm2 (c) 160N/mm2 (d) 180N/mm2

Description : The effective depth of a singly reinforced rectangular beam is 300mm. the section is over-reinforced and the neutral axis is 120mm below the top. If the maximum stress attained by concrete is 5N/mn2 and the modular ratio ... in the steel will (a) 130N/mm2 (b) 135N/mm2 (c) 160N/mm2 (d) 180N/mm2

Last Answer : (b) 135N/mm2

The moment of resistance of an over-reinforcement section is determined on the basis of (a) Compressive force developed in concrete (b) Tensile force developed in steel (c) Both (a) & (b) (d) None of these

Description : The moment of resistance of an over-reinforcement section is determined on the basis of (a) Compressive force developed in concrete (b) Tensile force developed in steel (c) Both (a) & (b) (d) None of these

Last Answer : (a) Compressive force developed in concrete

For an over –reinforced (singly reinforced )rectangular reinforced concrete section (a) The lever arm will be less than that for a balanced section (b) The maximum stress developed by concrete will be equal to allowable stress in concrete (c) The maximum stress developed by steel will be equal to the allowable (d) All the above

Description : For an over -reinforced (singly reinforced )rectangular reinforced concrete section (a) The lever arm will be less than that for a balanced section (b) The maximum stress developed by concrete will be equal ... c) The maximum stress developed by steel will be equal to the allowable (d) All the above

Last Answer : (b) The maximum stress developed by concrete will be equal to allowable stress in concrete

In an over-reinforced section (a) Steel reinforcement is not fully stressed to its permissible value (b) Concrete is not fully stressed to its permissible value (c) Either (a) and (b) (d) Both (a) and (b)

Description : In an over-reinforced section (a) Steel reinforcement is not fully stressed to its permissible value (b) Concrete is not fully stressed to its permissible value (c) Either (a) and (b) (d) Both (a) and (b)

Last Answer : (a) Steel reinforcement is not fully stressed to its permissible value

In a singly reinforced beam, if the stress in concrete reaches its allowable limit later than the steel reaches, its permissible value, the beam section is said to be (a) Under-reinforced section (b) Over-reinforced section (c) Critical section (d) Balanced section

Description : In a singly reinforced beam, if the stress in concrete reaches its allowable limit later than the steel reaches, its permissible value, the beam section is said to be (a) Under-reinforced section (b) Over-reinforced section (c) Critical section (d) Balanced section

Last Answer : (b) Over-reinforced section

The moment of resistance of an under- reinforced section is computer on the basis of (a) Compressive force developed in concrete (b) Tensile force developed in steel (c) Both (a) & (b) (d) All the above

Description : The moment of resistance of an under- reinforced section is computer on the basis of (a) Compressive force developed in concrete (b) Tensile force developed in steel (c) Both (a) & (b) (d) All the above

Last Answer : (b) Tensile force developed in steel

The section in which concrete is not fully stressed to its permissible value when stress in steel reaches its maximum value is (a) Under-reinforced section (b) Over-reinforced section (c) Critical section (d) Balanced section

Description : The section in which concrete is not fully stressed to its permissible value when stress in steel reaches its maximum value is (a) Under-reinforced section (b) Over-reinforced section (c) Critical section (d) Balanced section

Last Answer : (a) Under-reinforced section

In a beam section, if the steel reinforcement is of such a magnitude that the permissible stresses in concrete and steel are developed simultaneously, the section is. (a) Balanced section (b) Economical section (c) Critical section (d) All the above

Description : In a beam section, if the steel reinforcement is of such a magnitude that the permissible stresses in concrete and steel are developed simultaneously, the section is. (a) Balanced section (b) Economical section (c) Critical section (d) All the above

Last Answer : (d) All the above