7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from the sender to the destination network. C. It uses a protocol that will be rejected by the gateway to determine the location. D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

7.How does traceroute work?
A. It uses an ICMP destination-unreachable message to elicit the name of a router.
B. It sends a specially crafted IP packet to a router to locate the number of hops from the
sender to the destination network.
C. It uses a protocol that will be rejected by the gateway to determine the location.
D. It uses the TTL value in an ICMP message to determine the number of hops from the
sender to the router.
by

1 Answer

Answer :

D. It uses the TTL value in an ICMP message to determine the number of hops from the
sender to the router.
by

Related questions

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, ... iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii ... and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same destination can take different routes in the network c. IP ensures that a packet is discarded if it is unable to reach its destination within a given number of hops d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way

Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. Discard packets that reach later than that time c. Prevent packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Description : For which one of the following reasons does Internet Protocol (IP) use the time-to- live (TTL) field in the IP datagram header? a. Ensure packets reach destination within that time b. ... packets from looping indefinitely d. Limit the time for which a packet gets queued in intermediate routers.

Last Answer : c. Prevent packets from looping indefinitely

Which protocol carries messages such as destination Unreachable, Time Exceeded, Parameter Problem, Source Quench, Redirect, Echo, Echo Reply, Timestamp, Information Request, Information Reply, Address Request, and Address Reply? * ICMP * UDP * TCP * TFTP

Description : Which protocol carries messages such as destination Unreachable, Time Exceeded, Parameter Problem, Source Quench, Redirect, Echo, Echo Reply, Timestamp, Information Request, Information Reply, Address Request, and Address Reply? * ICMP * UDP * TCP * TFTP

Last Answer : Correct answer: A ICMP (Internet Control Message Protocol) is a network layer internet protocol described in RFC # 792. ICMP reports IP packet information such as destination Unreachable, Time ... Echo Reply, Timestamp, Information Request, Information Reply, Address Request, and Address Reply.

A packet whose destination is outside the local TCP/IP network segment is sent to .............. (1) File server (2) DNS server (3) DHCP server (4) Default gateway

Description : A packet whose destination is outside the local TCP/IP network segment is sent to .............. (1) File server (2) DNS server (3) DHCP server (4) Default gateway

Last Answer : Answer: 4 

………………….. is responsible for converting the higher level protocol addresses (IP addresses) to physical network addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ………………….. is responsible for converting the higher level protocol addresses (IP addresses) to physical network addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

The ________is a network layer Internet protocol that provides message packets to report errors and other information regarding IP packet processing back to the source: a) Internet Control Message Protocol b) Internet Standard Flexible Message Protocol c) Internet Dynamic Chartered Message Protocol d) None of These

Description : The ________is a network layer Internet protocol that provides message packets to report errors and other information regarding IP packet processing back to the source: a) Internet Control Message ... Standard Flexible Message Protocol c) Internet Dynamic Chartered Message Protocol d) None of These

Last Answer : a) Internet Control Message Protocol

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1) Application layer Firewall 2) Packet Filtering Firewall 3) Router enhanced firewall 4) IP enabled firewall

Description : Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1) Application layer Firewall 2) Packet Filtering Firewall 3) Router enhanced firewall 4) IP enabled firewall

Last Answer : 2) Packet Filtering Firewall

Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1 Application layer Firewall 2 Packet Filtering Firewall 3 Router enhanced firewall 4 IP enabled firewall

Description : Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1 Application layer Firewall 2 Packet Filtering Firewall 3 Router enhanced firewall 4 IP enabled firewall

Last Answer : 2 Packet Filtering Firewall

Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame. C. One of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for encapsulation? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets. B. a technique used by protocols in which a lower level ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame

Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol accepts a message from ahigher level protocol and places it in the data portion of the low level frame C. one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Description : Which of the following technique isused for fragment? A. a technique used inbest-effort delivery systems toavoid endlessly loopingpackets B. a technique used by protocols in which a lower level protocol ... network that cannothandle the originaldatagram size D. All of theabove E. None of the above

Last Answer : one of the pieces that results when an IP gateway divides an IP datagram into smallerpieces for transmission acrossa network that cannothandle the originaldatagram size

ICMP (Internet Control Message Protocol) is A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring filesfrom one machine to another C. a protocol used to monitor computersD.a protocol that handles error andcontrol messagesE.None of the above

Description : ICMP (Internet Control Message Protocol) is A. a TCP/IP protocol used todynamically bind ahigh level IP Address to alow-level physical hardware address B. a TCP/IP high level protocol for transferring ... to monitor computers D. a protocol that handles error andcontrol messages E. None of the above

Last Answer : a protocol that handles error andcontrol messages

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) Address Resolution Protocol (ARP) A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet protocol(IP) ii) Internet control Message Protocol(ICMP) iii) Bootstrap Protocol (BooTP) iv) Dynamic Host Configuration Protocol (DHCP) v) ... C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) Address Resolution Protocol (ARP) A) i, ii, iii, and iv only B) ii, iii, iv and v only C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Description : The most important and common protocols associated TCP/IP internetwork layer are. i) Internet Protocol (IP) ii) Internet Control Message Protocol (ICMP) iii) Bootstrap Protocol (BOOTP) iv) Dynamic Host Configuration Protocol (DHCP) V) ... C) i, iii, iv and v only D) All i, ii, iii, iv and v only

Last Answer : D) All i, ii, iii, iv and v only

........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........... is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : A) Address Resolution Protocol (ARP)

State weather the following statement is true or false for Internetwork layer. 1).Other internetwork-layer protocols are IP, ICMP, IGMP, ARP, and RARP. 2). Internet Protocol (IP) is the least important protocol in this layer 3). The internetwork layer, also called the internet layer or the network layer, provides the “virtual network” A. 1. True, 2. true, 3. true B. 1. true, 2. false, 3.true C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Description : State weather the following statement is true or false for Internetwork layer. 1).Other internetwork-layer protocols are IP, ICMP, IGMP, ARP, and RARP. 2). Internet Protocol (IP) is the least important protocol in this layer ... 3.true C. 1. false, 2. false, 3. false D. 1. true, 2. true, 3. false

Last Answer : B. 1. true, 2. false, 3.true

The program used to determine the round trip delay between a workstation and a destination address is a. Tracert b. Traceroute c. Ping d. Pop

Description : The program used to determine the round trip delay between a workstation and a destination address is a. Tracert b. Traceroute c. Ping d. Pop

Last Answer : b. Traceroute

........ is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Description : ........ is responsible for converting the higher level protocol addresses to physical Network Addresses. A) Address Resolution Protocol (ARP) B) Reverse Address Resolution Protocol (RARP) C) Bootstrap Protocol (BOOTP) D) Internet Control Message Protocol (ICMP)

Last Answer : D) Internet Control Message Protocol (ICMP)

If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : If the sender is a host and wants tosend a packet toanotherhost on another network, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : the IP address of therouter found inthe routing table

Which among the below stated datagram discard code fields in ICMP is/are generated if a router fails to forward a packet due to administrative filtering? a. Source Route Failed b. Communication Administratively Prohibited c. Host Precedence Violation d. Precedence Cut-off in Effect

Description : Which among the below stated datagram discard code fields in ICMP is/are generated if a router fails to forward a packet due to administrative filtering? a. Source Route Failed b. Communication Administratively Prohibited c. Host Precedence Violation d. Precedence Cut-off in Effect

Last Answer : b. Communication Administratively Prohibited

In _______delivery, both thedeliverer of the IP packet and the destination are on the same network. A) aconnectionless B) a direct C) an indirect D) none of the above

Description : In _______delivery, both thedeliverer of the IP packet and the destination are on the same network. A) aconnectionless B) a direct C) an indirect D) none of the above

Last Answer : a direct

The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : The sender is a router thathas receiveda datagram destinedfor a host on thesame network. The logical address that mustbe mapped to a physical address is ______. A) thedestination IP address in the datagram ... IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

Which one of the following fields of an IP header is NOT modified by a typical IP router? a. Checksum b. Source address c. Time to Live (TTL) d. Length

Description : Which one of the following fields of an IP header is NOT modified by a typical IP router? a. Checksum b. Source address c. Time to Live (TTL) d. Length

Last Answer : b. Source address

A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP trafficc. stop incoming traffic from a specific IP address but allow outgoing traffic to the same IP address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Description : A layer-4 firewall (a device that can look at all protocol headers up to the transport layer) CANNOT a. block entire HTTP traffic during 9:00PM and 5 :0OAM b. block all ICMP traffic c. stop ... address d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Last Answer : d. block TCP traffic from a specific user on a multi-user system during 9:00PM and 5:00AM

Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Description : Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Last Answer : D. Packet mode

Which protocol does hackers use to make their system seems as your system or another allowed host on your network? a. SNMP protocol b. TCP protocol c. ARP protocol d. ICMP protocol

Description : Which protocol does hackers use to make their system seems as your system or another allowed host on your network? a. SNMP protocol b. TCP protocol c. ARP protocol d. ICMP protocol

Last Answer : c. ARP protocol

Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends one frame, stops until it receives confirmation from the receiver, and then sends the next frame. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait

Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Description : Inthe _____ Protocol, the sender sends its frames oneafter another with noregard to the receiver. A) Stop-and-Wait B) Simplest C) Go-Back-N ARQ D) Selective-Repeat ARQ

Last Answer : Stop-and-Wait B) Simplest

What are the problems involved in an IP Fragmentation Process? A. Loss of any fragment results in rejection of all datagrams B. Management of buffer space is essential to handle reassembly process C. No necessity of initializing the timer after the reception of initial fragment D. Multiple attempts can be made to recover ICMP error message due to connection-oriented IP service a. A & B b. C & D c. B& C d. A & D

Description : What are the problems involved in an IP Fragmentation Process? A. Loss of any fragment results in rejection of all datagrams B. Management of buffer space is essential to handle reassembly process C. No necessity of initializing ... -oriented IP service a. A & B b. C & D c. B& C d. A & D

Last Answer : a. A & B

The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine and the InternetProtocol Software on another C. reports error conditions tothe original source, the source must relate errors to individual applicationprograms and takeaction to correct theproblem D. All of theabove E. None of the above

Description : The Internet Control Message Protocol (ICMP) A. allows gateways to send error acontrol messages toother gateways or hosts B. provides communication between the Internet Protocol Software on one machine ... and takeaction to correct theproblem D. All of theabove E. None of the above

Last Answer : All of theabove

ICMP stands for __________ a. Internet Coordinate Message Protocol b. Internet Control Message Protocol c. Interconnect Control Message Protocol d. Interconnect Coordinate Message Protocol

Description : ICMP stands for __________ a. Internet Coordinate Message Protocol b. Internet Control Message Protocol c. Interconnect Control Message Protocol d. Interconnect Coordinate Message Protocol

Last Answer : b. Internet Control Message Protocol

f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram header B) the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Description : f the sender is a host and wants tosend a packet toanotherhost on the samenetwork, the logical address that must be mapped to a physical address is ______. A) thedestination IP address in the datagram ... the IP address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : hedestination IP address in the datagram header

____intercepts all messages entering and leaving the network. The _____effectively hides the true network addresses: a) Circuit Level Gateway b) Proxy Server c) Packet Filter d) None of These

Description : ____intercepts all messages entering and leaving the network. The _____effectively hides the true network addresses: a) Circuit Level Gateway b) Proxy Server c) Packet Filter d) None of These

Last Answer : b) Proxy Server

While sending a signed message, a sender a. sends message key using public key encryption using DES and hashed message using public key encryption b. sends message using public key encryption and hashed message using DES c. sends both message and hashed message using DES d. sends both message and hashed message using public key encryption

Description : While sending a signed message, a sender a. sends message key using public key encryption using DES and hashed message using public key encryption b. sends message using public key encryption ... and hashed message using DES d. sends both message and hashed message using public key encryption

Last Answer : a. sends message key using public key encryption using DES and hashed message using public key encryption  

The IP packet that carries an IGMP packet has a value of _______ in its protocol field. A) 3 B) 2 C) 1 D) noneof the above

Description : The IP packet that carries an IGMP packet has a value of _______ in its protocol field. A) 3 B) 2 C) 1 D) noneof the above

Last Answer : 2

The number of network segments on which the datagram is allowed to travel before a router should discard it is called _______. A. Time to Live (TTL) B. Time to Die(TTD) C. self recognition D. both a and b

Description : The number of network segments on which the datagram is allowed to travel before a router should discard it is called _______. A. Time to Live (TTL) B. Time to Die(TTD) C. self recognition D. both a and b

Last Answer : A. Time to Live (TTL)

When using access lists, what does a Cisco router check first? * To see if the packet is routable or bridgeable * The destination address * The source address * The packet contents

Description : When using access lists, what does a Cisco router check first? * To see if the packet is routable or bridgeable * The destination address * The source address * The packet contents

Last Answer : Correct answer: A The first thing checked is to see if the packet is routable or bridgeable. If it is not, the packet will be dropped.

In SMTP mail transaction flow, the sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ………. a. 220 service ready message b. 421 service not available message c. Both of the above d. None of the above

Description : In SMTP mail transaction flow, the sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ………. a. 220 service ready message b. 421 service not available message c. Both of the above d. None of the above

Last Answer : c. Both of the above

The sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ____ Service ready message.. A. 420 B. 320 C. 220 D. 120

Description : The sender SMTP establishes a TCP connection with the destination SMTP and then waits for the server to send a ____ Service ready message.. A. 420 B. 320 C. 220 D. 120

Last Answer : C. 220

An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes. The number of fragments that the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Description : An IP datagram of size 1000 bytes arrives at a router. The router has to forward this packet on a link whose MTU (maximum transmission unit) is 100 bytes. Assume that the size of the IP header is 20 bytes ... the IP datagram will be divided into for transmission is : a. 10 b. 50 c. 12 d. 13

Last Answer : d. 13

The sender is a router thathas receiveda datagram destinedfor a host on anothernetwork. The logicaladdress that must be mapped to aphysical address is ______. A) thedestination IP address in the datagram headerB)the IP address of therouter found inthe routing tableC)either a or bD)noneof the above

Description : The sender is a router thathas receiveda datagram destinedfor a host on anothernetwork. The logicaladdress that must be mapped to aphysical address is ______. A) thedestination IP address in the datagram header ... address of therouter found inthe routing table C) either a or b D) noneof the above

Last Answer : thedestination IP address in the datagram header

The address resolution protocol (ARP) is used for a. Finding the IP address from the DNS b. Finding the IP address of the default gateway c. Finding the IP address that corresponds to a MAC address d. Finding the MAC address that corresponds to an IP address

Description : The address resolution protocol (ARP) is used for a. Finding the IP address from the DNS b. Finding the IP address of the default gateway c. Finding the IP address that corresponds to a MAC address d. Finding the MAC address that corresponds to an IP address

Last Answer : Finding the MAC address that corresponds to an IP address

Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1) DSL modem 2) A multi-homed firewall 3) VLAN 4) A brouter that acts both as a bridge and a router

Description : Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1) DSL modem 2) A multi-homed firewall 3) VLAN 4) A brouter that acts both as a bridge and a router

Last Answer : 2) A multi-homed firewall

Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1 DSL modem 2 A multi-homed firewall 3 VLAN 4 A brouter that acts both as a bridge and a router

Description : Your company receives internet access through a network or a gateway server. Which of the following devices is best suited to protect resources and subnet your LAN directly on the network server? 1 DSL modem 2 A multi-homed firewall 3 VLAN 4 A brouter that acts both as a bridge and a router

Last Answer : 2 A multi-homed firewall

In the following list of devices which device is used in network layer? (1) Repeaters (2) Router (3) Application Gateway (4) Switch

Description : In the following list of devices which device is used in network layer? (1) Repeaters (2) Router (3) Application Gateway (4) Switch

Last Answer : Router

ICMP is a _________ layer protocol. A) datalink B) transport C) network D) noneof the above

Description : ICMP is a _________ layer protocol. A) datalink B) transport C) network D) noneof the above

Last Answer : network

In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number

Description : In the TCP/IP protocol suite, which one of the following is NOT part of the IP header? a. Fragment Offset b. Source IP address c. Destination IP address d. Destination port number

Last Answer : d. Destination port number