Determine from the following the basic mode of transmission system in the public data network in which data are transferred from the source to the network and from the network to the destination in the frame format. A. Voice mode B. Asynchronous mode C. Synchronous mode D. Packet mode

Determine from the following the basic mode of transmission system in the public data
network in which data are transferred from the source to the network and from the network
to the destination in the frame format.
A. Voice mode
B. Asynchronous mode
C. Synchronous mode
D. Packet mode
by

1 Answer

Answer :

D. Packet mode
by

Related questions

Data is directly on the transmission cable. A. Asynchronous B. Synchronous C. Baseband D. Broadband

Description : Data is directly on the transmission cable. A. Asynchronous B. Synchronous C. Baseband D. Broadband

Last Answer : C. Baseband

What is the principal difference between asynchronous and synchronous transmission? A. The clocking is mixed with the data in synchronous transmission B. The pulse height are difficult C. The clocking is derived from the data in synchronous D. The bandwidth required is difficult.

Description : What is the principal difference between asynchronous and synchronous transmission? A. The clocking is mixed with the data in synchronous transmission B. The pulse height are difficult C. The clocking is derived from the data in synchronous D. The bandwidth required is difficult.

Last Answer : C. The clocking is derived from the data in synchronous

ECE Board Exam March 1996 What is the one principal difference between synchronous and asynchronous transmission? A. the pulse height are different B. the clocking is derived from the data in synchronous transmission C. the clocking is mixed with the data in asynchronous D. the bandwidth required is different

Description : ECE Board Exam March 1996 What is the one principal difference between synchronous and asynchronous transmission? A. the pulse height are different B. the clocking is derived from the data in ... C. the clocking is mixed with the data in asynchronous D. the bandwidth required is different

Last Answer : B. the clocking is derived from the data in synchronous transmission

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half duplex line is a communication line in which data can move in two directions, but not at the same time. c. Teleprocessing combines telecommunications and DP techniques in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Description : Which of the following statement is incorrect? a. The difference between synchronous and asynchronous transmission is the clocking derived from the data in synchronous transmission. b. Half ... in online activities d. Batch processing is the prefered processing mode for telecommunication operation.

Last Answer : Batch processing is the prefered processing mode for telecommunication operation.

Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Last Answer : (B) Serial

In __________ transmission, a unique SYNC character is transmitted at the beginning of each message. A. asynchronous B. synchronous C. digital D. analogue

Description : In __________ transmission, a unique SYNC character is transmitted at the beginning of each message. A. asynchronous B. synchronous C. digital D. analogue

Last Answer : B. synchronous

Compare characteristics of asynchronous and synchronous transmission mode.

Description : Compare characteristics of asynchronous and synchronous transmission mode (four points). 

Last Answer : Synchronous transmission Asynchronous transmission 1. Synchronous transmission are synchronized by an external clock. 1. Asynchronous transmission are synchronized by special signals along the transmission ... for transferring a small amount of data as it is simple and economical.

Known as the data transfer scheme that used handmaking principle. A. Synchronous data transfer scheme B. DMA data transfer scheme C. Asynchronous data transfer scheme D. Uninterrupted data transfer scheme

Description : Known as the data transfer scheme that used handmaking principle. A. Synchronous data transfer scheme B. DMA data transfer scheme C. Asynchronous data transfer scheme D. Uninterrupted data transfer scheme

Last Answer : A. Synchronous data transfer scheme

Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment

Description : Modem is referred to as ______. A. Universal asynchronous Rx/Tx B. Data communication equipment C. Universal synchronous Rx/Tx D. Data terminal equipment

Last Answer : B. Data communication equipment

7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from the sender to the destination network. C. It uses a protocol that will be rejected by the gateway to determine the location. D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Description : 7.How does traceroute work? A. It uses an ICMP destination-unreachable message to elicit the name of a router. B. It sends a specially crafted IP packet to a router to locate the number of hops from ... the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Last Answer : D. It uses the TTL value in an ICMP message to determine the number of hops from the sender to the router.

Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Description : Suppose transmission rate of a channel is 32 kbps. If there are ‘8’ routes from source to destination and each packet p contains 8000 bits. Total end to end delay in sending packet P is _____. a. 2 sec b. 3 sec c. 4 sec d. 1 sec

Last Answer : a. 2 sec

Slowest communications hardware product. A. Synchronous B. Asynchronous C. Ethernet D. Internet

Description : Slowest communications hardware product. A. Synchronous B. Asynchronous C. Ethernet D. Internet

Last Answer : B. Asynchronous

Synchronous modems cost more than asynchronous modem because _______. A. They have larger bandwidth B. They are larger C. The production volume is larger D. They have clock recovery circuits

Description : Synchronous modems cost more than asynchronous modem because _______. A. They have larger bandwidth B. They are larger C. The production volume is larger D. They have clock recovery circuits

Last Answer : D. They have clock recovery circuits

What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem D. C modem

Description : What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem D. C modem

Last Answer : B. X modem

What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem

Description : What is the data link protocol that is used in asynchronous transmission for transferring files from one computer to another? A. A modem B. X modem C. B modem

Last Answer : B. X modem

How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Description : How many bytes of data can be sent in 15 seconds over a serial link with baud rate of 9600 in asynchronous mode with odd parity and two stop bits in the frame? a. 10,000 bytes b. 12,000 bytes c. 15,000 bytes d. 27,000 bytes

Last Answer : b. 12,000 bytes

Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Description : Technical study which deals with production, transport and delivery of a quality signal from source to destination. A. Transmission system engineering B. Communication system engineering C. Telephony engineering D. Telegraphic engineering

Last Answer : A. Transmission system engineering

The _______ address in theheader ofa packet in adatagram network normally remains thesame during the entire journeyof the packet. A) source B) destination C) local D) none of the above

Description : The _______ address in theheader ofa packet in adatagram network normally remains thesame during the entire journeyof the packet. A) source B) destination C) local D) none of the above

Last Answer : destination

Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same destination can take different routes in the network c. IP ensures that a packet is discarded if it is unable to reach its destination within a given number of hops d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

Description : Which of the following assertions is FALSE about the Internet Protocol (IP)? a. It is possible for a computer to have multiple IP addresses b. IP packets from the same source to the same ... outgoing packets; the route is determined only by the routing tables in the routers on the way

Last Answer : d. The packet source cannot set the route of an outgoing packets; the route is determined only by the routing tables in the routers on the way

In virtual circuit network each packet contains ___________ a. full source and destination address b. a short VC number c. only source address d. only destination address

Description : In virtual circuit network each packet contains ___________ a. full source and destination address b. a short VC number c. only source address d. only destination address

Last Answer : b. a short VC number

In virtual circuit network each packet contains ___________ A. full source and destination address B. a short VC number C. only source address D. only destination address

Description : In virtual circuit network each packet contains ___________ A. full source and destination address B. a short VC number C. only source address D. only destination address

Last Answer : B. a short VC number

In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Description : In_______transmission, astartbit and a stopbit frame a character byte. A) asynchronous serial B) synchronous serial C) parallel D) (a) and (b)

Last Answer : asynchronous serial

How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Description : How many 8-bit characters can be transmitted per second over a 9600 baud serial communication link using asynchronous mode of transmission with one start bit, eight data bits, two stop bits, and one parity bit ? a. 600 b. 800 c. 876 d. 1200

Last Answer : b. 800

In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Description : In_________ transmission, we send bits oneafter another without startor stop bits or gaps. It is the responsibilityof the receiver togroup the bits. A) synchronous B) asynchronous C) isochronous D) none of the abov

Last Answer : synchronous

In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : In______ transmission, wesend1 start bit (0) at thebeginningand 1 or more stop bits (1s) at the end of each byte. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : asynchronous

Point out the correct statement: 1) Different types of cloud computing service models provide different levels of security services 2) Adapting your on-premises systems to a cloud model requires that you determine what security mechanisms are required and mapping those to controls that exist in your chosen cloud service provider 3) Data should be transferred and stored in an encrypted format for security purpose A. 1,2,3 are correct B. only 1 is correct C. 2 and 3 are correct D. none are correct

Description : Point out the correct statement: 1) Different types of cloud computing service models provide different levels of security services 2) Adapting your on-premises systems to a cloud model requires that you determine what ... are correct B. only 1 is correct C. 2 and 3 are correct D. none are correct

Last Answer : 1,2,3 are correct

Point out the correct statement: 1) Different types of cloud computing service models provide different levels of security services 2) Adapting your on-premises systems to a cloud model requires that you determine what security mechanisms are required and mapping those to controls that exist in your chosen cloud service provider 3) Data should be transferred and stored in an encrypted format for security purpose A. 1,2,3 are correct B. only 1 is correct C. 2 and 3 are correct D. none are correct

Description : Point out the correct statement: 1) Different types of cloud computing service models provide different levels of security services 2) Adapting your on-premises systems to a cloud model requires that you determine what ... are correct B. only 1 is correct C. 2 and 3 are correct D. none are correct

Last Answer : 1,2,3 are correct

Point out the correct statement. a) Different types of cloud computing service models provide different levels of security services b) Adapting your on-premises systems to a cloud model requires that you determine what security mechanisms are required and mapping those to controls that exist in your chosen cloud service provider c) Data should be transferred and stored in an encrypted format for security purpose d) All of the mentioned

Description : Point out the correct statement. a) Different types of cloud computing service models provide different levels of security services b) Adapting your on-premises systems to a cloud model requires that ... be transferred and stored in an encrypted format for security purpose d) All of the mentioned

Last Answer : Data should be transferred and stored in an encrypted format for security purpose d) All of the mentioned

12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word. Determine the rate of the data stream. a. 354 kbps b. 750 kbps c. 768 kbps d. 640 kbps

Description : 12 voice channels are sampled at 8000 sampling rate and encoded into 8 bit PCM word. Determine the rate of the data stream. a. 354 kbps b. 750 kbps c. 768 kbps d. 640 kbps

Last Answer : c. 768 kbps

In telecommunications when we call data communications it means the transmission of________. A. Voice and video B. Voice C. Video D. Computer data

Description : In telecommunications when we call data communications it means the transmission of________. A. Voice and video B. Voice C. Video D. Computer data

Last Answer : D. Computer data

In _______delivery, both thedeliverer of the IP packet and the destination are on the same network. A) aconnectionless B) a direct C) an indirect D) none of the above

Description : In _______delivery, both thedeliverer of the IP packet and the destination are on the same network. A) aconnectionless B) a direct C) an indirect D) none of the above

Last Answer : a direct

A packet whose destination is outside the local TCP/IP network segment is sent to .............. (1) File server (2) DNS server (3) DHCP server (4) Default gateway

Description : A packet whose destination is outside the local TCP/IP network segment is sent to .............. (1) File server (2) DNS server (3) DHCP server (4) Default gateway

Last Answer : Answer: 4 

Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1) Application layer Firewall 2) Packet Filtering Firewall 3) Router enhanced firewall 4) IP enabled firewall

Description : Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1) Application layer Firewall 2) Packet Filtering Firewall 3) Router enhanced firewall 4) IP enabled firewall

Last Answer : 2) Packet Filtering Firewall

Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1 Application layer Firewall 2 Packet Filtering Firewall 3 Router enhanced firewall 4 IP enabled firewall

Description : Which of the following use routes with packet filtering rules to allow or deny access based on source address, destination address, or port number? 1 Application layer Firewall 2 Packet Filtering Firewall 3 Router enhanced firewall 4 IP enabled firewall

Last Answer : 2 Packet Filtering Firewall

When using access lists, what does a Cisco router check first? * To see if the packet is routable or bridgeable * The destination address * The source address * The packet contents

Description : When using access lists, what does a Cisco router check first? * To see if the packet is routable or bridgeable * The destination address * The source address * The packet contents

Last Answer : Correct answer: A The first thing checked is to see if the packet is routable or bridgeable. If it is not, the packet will be dropped.

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, ... iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii, iii and iv only B) i, iii, iv and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Description : In packet-filtering router, the following information can be external from the packet header. i) Source IP address ii) Destination IP address iii) TCP/UDP source port iv) ICMP message type v) TCP/UDP destination port A) i, ii ... and v only C) ii, iii, iv and v only D) All i, ii, iii, iv and v

Last Answer : D) All i, ii, iii, iv and v

ECE Board Exam March 1996 What is the IBM’s asynchronous data link protocol designation? A. 83 B B. 8A1 / 8B1 C. 93 B D. 9A1/ 9B1

Description : ECE Board Exam March 1996 What is the IBM’s asynchronous data link protocol designation? A. 83 B B. 8A1 / 8B1 C. 93 B D. 9A1/ 9B1

Last Answer : A. 83 B

What is framing? A. Is concerned of synchronous system B. Refers to parallel transmission C. Is concerned with the boundaries between characters D. Is concerned with individual bits

Description : What is framing? A. Is concerned of synchronous system B. Refers to parallel transmission C. Is concerned with the boundaries between characters D. Is concerned with individual bits

Last Answer : C. Is concerned with the boundaries between characters

The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Description : The synchronous modems are more costly than the asynchronous modems because a. they produce large volume of data b. they contain clock recovery circuits c. they transmit the data with stop and start bits d. they operate with a larger bandwidth e. none of above

Last Answer : they contain clock recovery circuits

The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Description : The ________ modeprovides synchronizationfor the entire stream of bits must. In other words, it guarantees that the data arrive ata fixed rate. A) synchronous B) asynchronous C) isochronous D) none of the above

Last Answer : isochronous

The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Description : The synchronous modems are more costly than the asynchronous modemsbecause A. they produce largevolumeof data B. they contain clock recovery circuits C. they transmit thedata with stop and start bits. D. they operate witha largerbandwidth E. None of the above

Last Answer : they contain clock recovery circuits

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errorsd. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Description : When does the station B send a positive acknowledgement (ACK) to station A in Stop and Wait protocol? a. only when no error occurs at the transmission level b. when retransmission of old packet in a novel frame is necessary c. only when station B receives frame with errors d. all of the above

Last Answer : only when no error occurs at the transmission level

It is a protocol used to connect the other packet witching network A. X.25 B. X.50 C. X.10 D. X.75

Description : It is a protocol used to connect the other packet witching network A. X.25 B. X.50 C. X.10 D. X.75

Last Answer : D. X.75

Noise always affects the signal in a communications systems at the ________. A. transmitter B. channel C. information source D. destination

Description : Noise always affects the signal in a communications systems at the ________. A. transmitter B. channel C. information source D. destination

Last Answer : B. channel

One of the following stands for SONET acronym in telecommunication A. System optical network B. Simple operation network C. Synchronous optical network D. System operating network

Description : One of the following stands for SONET acronym in telecommunication A. System optical network B. Simple operation network C. Synchronous optical network D. System operating network

Last Answer : C. Synchronous optical network