What is the range of asynchronous user data rates provided by HIPER-LAN? a) 1-100 Mbps
b) 50-100 Mbps
c) 1-20 Mbps
d) 500 Mbps to 1 Gbps

1 Answer

Answer :

c) 1-20 Mbps

Related questions

Description : How much packet data rate per user is supported by W-CDMA if the user is stationary? a) 2.048 Kbps b) 100 Mbps c) 2.048 Mbps d) 1 Gbps

Last Answer : c) 2.048 Mbps

Description : What is the channel symbol rate in Bluetooth for each user? a) 270.833 Kbps b) 1 Gbps c) 100 Mbps d) 1 Mbps

Last Answer : d) 1 Mbps

Description : What is the average uploading speed of 4G LTE network? a) 1-3 Gbps b) 2-5 Gbps c) 1-3 Mbps d) 2-5 Mbps

Last Answer : d) 2-5 Mbps

Description : HIPER-LAN stands for ____________ a) High Precision Radio Local Area Network b) High Performance Radio Local Area Network c) High Precision Radio Land Area Network d) Huge Performance Radio Link Access Node

Last Answer : b) High Performance Radio Local Area Network

Description : Which of the following is not a standard of WLAN? a) HIPER-LAN b) HIPERLAN/2 c) IEEE 802.11b d) AMPS

Last Answer : d) AMPS

Description : What is the name of the European WLAN standard that provides user data rate upto 54 Mbps? a) UNII b) WISP c) MMAC d) HIPERLAN/2

Last Answer : d) HIPERLAN/2

Description : Which of the following is not an application of third generation network? a) Global Positioning System (GPS) b) Video conferencing c) Mobile TV d) Downloading rate upto 1 Gbps

Last Answer : d) Downloading rate upto 1 Gbps

Description : What is the data rate of HomeRF 2.0? a) 10 Mbps b) 54 Mbps c) 200 Mbps d) 1 Mbps

Last Answer : a) 10 Mbps

Description : Which one of the following event is not possible in wireless LAN? a) collision detection b) acknowledgement of data frames c) multi-mode data transmission d) connection to wired networks

Last Answer : a) collision detection

Description : Determine the maximum length of the cable (in km) for transmitting data at a rate of 500 Mbps in an Ethernet LAN with frames of size 10,000 bits. Assume the signal speed in the cable to be 2,00,000 km/s. b. 2 c. 2.5 d. 5

Last Answer : b. 2

Description : Mostly ________ is used in wireless LAN. a) time division multiplexing b) orthogonal frequency division multiplexing c) space division multiplexing d) channel division multiplexing

Last Answer : b) orthogonal frequency division multiplexing

Description : LAN? a) CDMA b) CSMA/CA c) ALOHA d) CSMA/CD

Last Answer : b) CSMA/CA

Description : What is the access point (AP) in a wireless LAN? a) device that allows wireless devices to connect to a wired network b) wireless devices itself c) both device that allows wireless devices to connect to a wired network and wireless devices itself d) all the nodes in the network

Last Answer : a) device that allows wireless devices to connect to a wired network

Description : __________ carries digitally encoded user data. a) Traffic channels b) Control channels c) Signalling channels d) Forward channels

Last Answer : a) Traffic channels

Description : Which of the following is not a characteristic of Cdma2000? a) Adaptable baseband signalling rates b) Adaptable baseband chipping rates c) Multicarrier technologies d) OFDMA

Last Answer : d) OFDMA

Description : Which of the following is not a part of the characteristic of 4G network? a) Multirate management b) Fully converged services c) Software dependency d) Diverse user devices

Last Answer : a) Multirate management

Description : ……………….. is a high performance fiber optic token ring LAN running at 100 Mbps over distances upto 1000 stations connected. A) FDDI B) FDDT C) FDDR D) FOTR

Last Answer : A) FDDI

Description : ........... is a high performance fiber optic token ring LAN running at 100 Mbps over distances up to 1000 stations connected. A) FDDI B) FDDT C) FDDR D) FOTR

Last Answer : A) FDDI

Description : .is a high performance fiber optic token ring LAN running at 100 Mbps over distances up to 1000 stations connected. A) FDDI B) FDDT C) FDDR D) FOTR

Last Answer : A) FDDI

Description : A WAN typically spans a set of countries that have data rates less than ……………. Mbps.A) 2 B) 1 C) 4 D) 100

Last Answer : B) 1

Description : What are the two options provided by Cdma2000 1xEV? a) Cdma2000 1xRTT. Cdma2000 3xRTT b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV c) Cdma2000 1xEV-DT, Cdma2000 1xEV-DO d) Cdma2000 1xRTT, Cdma2000 1xEV-DV

Last Answer : b) Cdma2000 1xEV-DO, Cdma2000 1xEV-DV

Description : How much increase in spectral efficiency is provided by W-CDMA in comparison to GSM? a) Two times b) Three times c) No increase d) Six times

Last Answer : d) Six times

Description : What is the range of time slot in Bluetooth? a) 120 milliseconds b) 625 microseconds c) 577 microseconds d) 5.7 seconds

Last Answer : b) 625 microseconds

Description : What is the nominal range of Bluetooth? a) 1 Km b) 10 m c) 1 m d) 10 Km

Last Answer : b) 10 m

Description : The minimum frame size required for a CSMA/CD based computer network running at 1 Gbps on a 200m cable with a link speed of 2 × 108m/s is a. 125 bytes b. 250 bytes c. 500 bytes d. None of these

Last Answer : b. 250 bytes

Description : What is the chip rate of W-CDMA? a) 1.2288 Mcps b) 3.84 Mcps c) 270.833 Ksps d) 100 Mcps

Last Answer : b) 3.84 Mcps

Description : Header of datagram in IPv4 has _________ a) 0 to 20 bytes b) 20 to 40 bytes c) 20 to 60 bytes d) 20 to 80 bytes

Last Answer : c) 20 to 60 bytes

Description : Network layer at source is responsible for creating a packet from data coming from another ________ a) Station b) Link c) Node d) Protocol

Last Answer : d) Protocol

Description : Checksum is used in Internet by several protocols although not at the _________ a) Session layer b) Transport layer c) Network layer d) Data link layer

Last Answer : d) Data link layer

Description : For transmission of power over a distance of 500 km, the transmission voltage should be in the range (a) 150 to 220 kV (b) 100 to 120 kV (c) 60 to 100 kV (d) 20 to 50 kV

Last Answer : (a) 150 to 220 kV

Description : Which of the following is not backward compatible with Cdma2000? a) Cdma2000 1xRTT b) Cdma2000 3xRTT c) Cdma2000 1xEV-DO d) Cdma2000 1xEV-DT

Last Answer : c) Cdma2000 1xEV-DO

Description : How is bandwidth increased in Cdma2000? a) Clubbing adjacent radio channels b) Changing the hardware of base stations c) Change of spectrum d) Change of RF equipment

Last Answer : a) Clubbing adjacent radio channels

Description : Cdma2000 1xEV was developed by ________ a) Motorola b) AT&T Laboratories c) Qualcomm d) NTT

Last Answer : c) Qualcomm

Description : Cdma2000 works in TDD mode only. a) True b) False

Last Answer : b) False

Description : How many users are supported by Cdma2000 1X in comparison to 2G CDMA standard? a) Half b) Twice c) Six times d) Ten times

Last Answer : b) Twice

Description : Within ITU IMT-2000 body, Cdma2000 1xRTT is also known as ____________ a) Cdma2000 1xEV-DO b) Cdma2000 1xEV-DV c) IS-95B d) G3G-MC-CDMA-1X

Last Answer : d) G3G-MC-CDMA-1X

Description : Which of the following the first 3G CDMA air interface? a) IS-95 b) IS-95B c) Cdma2000 1xRTT d) CdmaOne

Last Answer : c) Cdma2000 1xRTT

Description : 2G and 2.5G CDMA operators may selectively introduce 3G capabilities at each cell without changing entire base stations and reallocate spectrums. a) True b) False

Last Answer : a) True

Description : Which of the following has no backward compatibility with 3G Cdma2000? a) IS-95 b) GPRS c) IS-95A d) IS-95B

Last Answer : b) GPRS

Description : The 2G GSM technology uses a carrier separation of _____________ a) 1.25 MHz b) 200 KHz c) 30 KHz d) 300 KHz

Last Answer : b) 200 KHz

Description : Which one of the following 2G standard is used in Japan? a) IS-136 b) GSM c) PDC d) AMPS

Last Answer : c) PDC

Description : 2G CDMA standard, IS-95, was proposed by which company? a) Nippon Telephone and Telegraph (NTT) b) Qualcomm c) Bellcore and Motorola d) AT&T Bell Laboratories

Last Answer : b) Qualcomm

Description : GSM (Global System for Mobile) was earlier also known as _____________ a) Group System Mobile b) Global Special Meaning c) Group Special Mobile d) Global Special Mobile

Last Answer : c) Group Special Mobile

Description : Which is one of the disadvantages of 2G standards? a) Short Messaging Service (SMS) b) Digital modulation c) Limited capacity d) Limited Internet Browsing

Last Answer : d) Limited Internet Browsing

Description : IS-136 uses which modulation technique? a) π/4 DQPSK b) BPSK c) GMSK d) AFSK

Last Answer : a) π/4 DQPSK

Description : IS-95 uses which modulation technique? a) GMSK b) BPSK c) QAM d) AFSK

Last Answer : b) BPSK

Description : Which modulation technique is used by GSM? a) GMSK b) BPSK c) QPSK d) GFSK

Last Answer : a) GMSK

Description : How many users are supported in IS-95 for each 1.25 MHz? a) Eight b) Sixty four c) Sixteen d) Twenty five

Last Answer : b) Sixty four

Description : How many voice channels are supported for each 30 KHz radio channel in IS-136? a) Eight b) Thirty c) Three d) Sixteen

Last Answer : c) Three

Description : How many users or voice channels are supported for each 200 KHz channel in GSM? a) Eight b) Three c) Sixty four d) Twelve

Last Answer : a) Eight