A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes

A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes
by

1 Answer

Answer :

b. two places
by

Related questions

If the positive and negative shear force diagram areas are not equal, it can be concluded that a.shear force diagram has been wrongly drawn b.there is at least one couple acting on the beam c.107 dynes d.there are at least two maxima for bending moment e.bending moment does not change sign

Description : If the positive and negative shear force diagram areas are not equal, it can be concluded that a.shear force diagram has been wrongly drawn b.there is at least one couple acting on the beam c.107 dynes d.there are at least two maxima for bending moment e.bending moment does not change sign

Last Answer : b. there is at least one couple acting on the beam

In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is proportional to the distance of the fibre from the load carrying end d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Description : In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is ... d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Last Answer : b. the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis

In case of cantilever, irrespective of the type of loading the maximum bendry moment and maximum shear force occur at a.107 dynes b.Free end c.2/3 of the length, from the free end d.Centre of the beam e.Fixed end

Description : In case of cantilever, irrespective of the type of loading the maximum bendry moment and maximum shear force occur at a.107 dynes b.Free end c.2/3 of the length, from the free end d.Centre of the beam e.Fixed end

Last Answer : e. Fixed end

A column has its equivalent length equal to its length in case of a.one end fixed, other free b.both ends hinged c.one end hinged, other free d.107 dynes e.both end fixed

Description : A column has its equivalent length equal to its length in case of a.one end fixed, other free b.both ends hinged c.one end hinged, other free d.107 dynes e.both end fixed

Last Answer : b. both ends hinged

If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Description : If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Last Answer : d. 932,000 kg

When two concurrent and coplaner forces P and Q act at an angle of 180?, their resultant will be a a.moment equal to PQ b.couple c.(P-Q) d.107 dynes e.zero

Description : When two concurrent and coplaner forces P and Q act at an angle of 180?, their resultant will be a a.moment equal to PQ b.couple c.(P-Q) d.107 dynes e.zero

Last Answer : c. (P-Q)

The torque acting on a system is zero. Which of the following will be conserved? a.Angular velocity b.Linear momentum c.107 dynes d.Angular momentum e.Moment of inertia

Description : The torque acting on a system is zero. Which of the following will be conserved? a.Angular velocity b.Linear momentum c.107 dynes d.Angular momentum e.Moment of inertia

Last Answer : d. Angular momentum

A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.107 dynes b.i + j + k c.2i + 3j d.zero e.i - j - k

Description : A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.107 dynes b.i + j + k c.2i + 3j d.zero e.i - j - k

Last Answer : b. i + j + k

In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal a.the force applied on A must be equal to that on B b.at least one man on side B should be removed c.infinite force will be required to be applied at both ends d.the force required on A must not be equal to that on B e.107 dynes

Description : In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal ... to be applied at both ends d.the force required on A must not be equal to that on B e.107 dynes

Last Answer : c. infinite force will be required to be applied at both ends

A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

ML2T-2 could be the dimension of a.107 dynes b.moment of force c.viscosity d.mass moment of inertia e.momentum

Description : ML2T-2 could be the dimension of a.107 dynes b.moment of force c.viscosity d.mass moment of inertia e.momentum

Last Answer : b. moment of force

When all the forces acting on a body lie in one plane and their lines of action meet at one point, the forces a.constitute a moment b.constitute a couple c.are known as coplaner-concurrent forces. d.are known as non-coplaner forces e.107 dynes

Description : When all the forces acting on a body lie in one plane and their lines of action meet at one point, the forces a.constitute a moment b.constitute a couple c.are known as coplaner-concurrent forces. d.are known as non-coplaner forces e.107 dynes

Last Answer : c. are known as coplaner-concurrent forces.

If a gymnast sitting on a rotating stool, with his arms outstretched suddenly lowers his arm a.the angular velocity will remain constant b.the angular momentum will increase c.the angular velocity will decrease d.his moment of inertia will decrease e.107 dynes

Description : If a gymnast sitting on a rotating stool, with his arms outstretched suddenly lowers his arm a.the angular velocity will remain constant b.the angular momentum will increase c.the angular velocity will decrease d.his moment of inertia will decrease e.107 dynes

Last Answer : d. his moment of inertia will decrease

The polar moment of inertia of a hollow circular section whose external diameter is 8 cm and internal diameter of 6 cm will be a.137.5 cm4 b.107 dynes c.275 cm4 d.550 cm4 e.1100 cm4

Description : The polar moment of inertia of a hollow circular section whose external diameter is 8 cm and internal diameter of 6 cm will be a.137.5 cm4 b.107 dynes c.275 cm4 d.550 cm4 e.1100 cm4

Last Answer : c. 275 cm4

A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Description : A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Last Answer : c. 5 m/s

A stone weighing 20 N is whirling in a vertical circle at the extremity of a string 100 cm long. The tension in the string will be zero a.at the highest position b.at the lowest position c.at the midway position d.at none of the above e.107 dynes

Description : A stone weighing 20 N is whirling in a vertical circle at the extremity of a string 100 cm long. The tension in the string will be zero a.at the highest position b.at the lowest position c.at the midway position d.at none of the above e.107 dynes

Last Answer : a. at the highest position

Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Description : Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Last Answer : d. A ball at its highest point of its rise when thrown up

Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Description : Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Last Answer : c. When we are ascending in a lift with acceleration of 4.9 m/s2

Rain drops (assumed to be spherical) of radii R1, 2R1, 3R, 4R, a.all of them will be zero b.all of them will be same c.drops of radius R will be maximum d.drops of radius R will be minimum e.107 dynes

Description : Rain drops (assumed to be spherical) of radii R1, 2R1, 3R, 4R, a.all of them will be zero b.all of them will be same c.drops of radius R will be maximum d.drops of radius R will be minimum e.107 dynes

Last Answer : d. drops of radius R will be minimum

In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 60. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.90 b.120 c.60 d.45 e.107 dynes

Last Answer : a. 90

A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Last Answer : e. 60.1 mts

In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90

Description : In a single threaded worm and worm wheel the number of teeth on the worm wheel is 80. The diameter of the effort wheel is 12 cm and that of load drum is 8 cm. The velocity ratio will be a.60 b.45 c.120 d.107 dynes e.90

Last Answer : c. 120

A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Description : A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Last Answer : c. 15 kg

The resultant of coplaner parallel forces is found by load line diagram, while the position is found by a.link polygen b.funicular polygon c.string polygon d.any of the above e.107 dynes

Description : The resultant of coplaner parallel forces is found by load line diagram, while the position is found by a.link polygen b.funicular polygon c.string polygon d.any of the above e.107 dynes

Last Answer : d. any of the above

If w is the angular velocity of the pulley and T1 and T2 are tensions of driving and driven side then power transmitted equals a.(T1 + T2) w b.(T1 + 2T2) w c.107 dynes d.(T1 - T2) w e.wT1

Description : If w is the angular velocity of the pulley and T1 and T2 are tensions of driving and driven side then power transmitted equals a.(T1 + T2) w b.(T1 + 2T2) w c.107 dynes d.(T1 - T2) w e.wT1

Last Answer : d. (T1 - T2) w

A plane is inclinea at angle ? to horizontal. If a body can just rest on a plane, determine the least force to draw the body up the plance a.W sin2? b.2 W cos2? c.107 dynes d.W cos2? e.2 W sin2?

Description : A plane is inclinea at angle ? to horizontal. If a body can just rest on a plane, determine the least force to draw the body up the plance a.W sin2? b.2 W cos2? c.107 dynes d.W cos2? e.2 W sin2?

Last Answer : a. W sin2?

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

A truss element a.107 dynes b.resists lateral forces c.is a two-force body d.is a three force body e.resist forces in compression only

Description : A truss element a.107 dynes b.resists lateral forces c.is a two-force body d.is a three force body e.resist forces in compression only

Last Answer : c. is a two-force body

If three non-parallel forces hold a rigid body in equilibrium, they must a.be non-coneurrent b.be colinear c.107 dynes d.be equal in magnitude e.be concurrent

Description : If three non-parallel forces hold a rigid body in equilibrium, they must a.be non-coneurrent b.be colinear c.107 dynes d.be equal in magnitude e.be concurrent

Last Answer : e. be concurrent

Three forces A, B and C of magnitudes 8 N, 12 N and 20 N acting on a particle are in equilibrim. It can be concluded that a.107 dynes b.B and C act in opposite directions c.one of the forces in non-coplaner d.A and B act at 90? e.one of the forces is non-concurrent

Description : Three forces A, B and C of magnitudes 8 N, 12 N and 20 N acting on a particle are in equilibrim. It can be concluded that a.107 dynes b.B and C act in opposite directions c.one of the forces in non-coplaner d.A and B act at 90? e.one of the forces is non-concurrent

Last Answer : b. B and C act in opposite directions

Let the only force acting on two bodies be their mutual interactions. If both bodies start from rest, the distances travelled by each will be a a.proportional to the respective masses of the bodies b.107 dynes c.inversely proportional to the respective masses of the bodies d.directly proportional to the square of the respective masses of the bodies e.inversely proportional to the square of the respective masses of the bodies

Description : Let the only force acting on two bodies be their mutual interactions. If both bodies start from rest, the distances travelled by each will be a a.proportional to the respective masses of the ... masses of the bodies e.inversely proportional to the square of the respective masses of the bodies

Last Answer : c. inversely proportional to the respective masses of the bodies

A block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height a.block A will have higher velocity than block B while hitting the ground b.block B will hit the ground earlier. c.both will hit the ground simultaneously d.block A will hit the ground earlier e.107 dynes

Description : A block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height a.block A will have higher velocity than block B while hitting the ... . c.both will hit the ground simultaneously d.block A will hit the ground earlier e.107 dynes

Last Answer : b. block B will hit the ground earlier.

The springs A and B are identical except that A is stiffer than B, that is KA > kB. If both the springs are stretched by the same amount a.more work will be expended on A than B b.same work will be expended in both springs. c.less work will be expended on A than B d.107 dynes e.

Description : The springs A and B are identical except that A is stiffer than B, that is KA > kB. If both the springs are stretched by the same amount a.more work will be expended on A than B b.same work will be expended in both springs. c.less work will be expended on A than B d.107 dynes e.

Last Answer : a. more work will be expended on A than B

A fixed beam with central point load undergoes a slight settlement at one end. Select suitable answer from the following: (a) Moment induced at both ends will be same (b) Moment induced at the end that has undergone settlement will be maximum (c) Moment induced will be maximum at the end having no settlement (d) Zero moment at the end that has settled.

Description : A fixed beam with central point load undergoes a slight settlement at one end. Select suitable answer from the following: (a) Moment induced at both ends will be same (b) Moment induced at the end that ... will be maximum at the end having no settlement (d) Zero moment at the end that has settled.

Last Answer : (c) Moment induced will be maximum at the end having no settlement

A train travels between two stations 15 km apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform retardation, the maximum speed attained by the train during the journey will by a.125 km/hr b.107 dynes c.80 km/hr d.100 km/hr e.60 km/hr

Description : A train travels between two stations 15 km apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform retardation, the maximum speed attained by the train during the journey will by a.125 km/hr b.107 dynes c.80 km/hr d.100 km/hr e.60 km/hr

Last Answer : d. 100 km/hr

A train travels between two stations 15 km, apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform relardation, the maximum speed attained by the train, during, the journey, will be a.60 km/hr b.80 km/hr c.125 km/hr d.100 km/hr e.107 dynes

Description : A train travels between two stations 15 km, apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform relardation, the maximum speed attained by the train, during, the journey, will be a.60 km/hr b.80 km/hr c.125 km/hr d.100 km/hr e.107 dynes

Last Answer : d. 100 km/hr

The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Description : The torque of 50 Nm is applied on the wheel operating a valve. If the wheel is rotated through two revolutions, work done in Newton-metres is given by a.628 b.107 dynes c.314 d.25 e.100

Last Answer : a. 628

When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Description : When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Last Answer : c. equal in magnitude

In the second system of pulleys, if there are two pulley blocks having 'n1' and 'n2' pulleys in the first and second pulley blocks respectively, then the velocity ratio of the whole system will be equal to a.2n1 + n2 b.n1 - n2 c.107 dynes d.2n1 + 2n2 e.n1 + n2

Description : In the second system of pulleys, if there are two pulley blocks having 'n1' and 'n2' pulleys in the first and second pulley blocks respectively, then the velocity ratio of the whole system will be equal to a.2n1 + n2 b.n1 - n2 c.107 dynes d.2n1 + 2n2 e.n1 + n2

Last Answer : b. n1 - n2

The sag in a tape 100 ft long held between two supports 99.8 ft aprat at the same level is a.3.32 ft b.0.98 ft c.2.73 ft d.1.87 ft e.107 dynes

Description : The sag in a tape 100 ft long held between two supports 99.8 ft aprat at the same level is a.3.32 ft b.0.98 ft c.2.73 ft d.1.87 ft e.107 dynes

Last Answer : c. 2.73 ft

Two identical weights are dropped simultaneously, one on water and the other in glycerine. Which of the following statement is correct? a.The weight will settle slowly in water but quickly in glycerine b.The weights will take same time to settle c.The water level will fall but glycerine level will rise d.The weight will settle quickly in water but slowly in glycerine e.107 dynes

Description : Two identical weights are dropped simultaneously, one on water and the other in glycerine. Which of the following statement is correct? a.The weight will settle slowly in water but quickly in glycerine ... level will rise d.The weight will settle quickly in water but slowly in glycerine e.107 dynes

Last Answer : d. The weight will settle quickly in water but slowly in glycerine

A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Description : A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Last Answer : c. 250

At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Description : At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Last Answer : b. 90?

What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Description : What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Last Answer : a. 0.35

A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8

Description : A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8

Last Answer : e. 8

An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Description : An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Last Answer : b. 6170 lb

According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Description : According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Last Answer : e. same at every point in its line of action

A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves towards the axis of rotation c.jumps out from the platform d.accepts a heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Description : A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves ... heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Last Answer : d. accepts a heavy bag from one of his friends standing near by and holds it in his hand

If the distance to electric train is given by Fr = a + bv + cv2 In this equation constant c is likely to cover a.air resistance b.track resistance c.frictional resistance d.flange resistance e.107 dynes

Description : If the distance to electric train is given by Fr = a + bv + cv2 In this equation constant c is likely to cover a.air resistance b.track resistance c.frictional resistance d.flange resistance e.107 dynes

Last Answer : a. air resistance

A hammer gains 50 Ns momentum in 0.05 sec. The average force on the hammer will be a.500 N b.2000 N c.1500 N d.107 dynes e.1000 N

Description : A hammer gains 50 Ns momentum in 0.05 sec. The average force on the hammer will be a.500 N b.2000 N c.1500 N d.107 dynes e.1000 N

Last Answer : e. 1000 N