When all the forces acting on a body lie in one plane and their lines of action meet at one point, the forces a.constitute a moment b.constitute a couple c.are known as coplaner-concurrent forces. d.are known as non-coplaner forces e.107 dynes

When all the forces acting on a body lie in one plane and their lines of action meet at one point, the forces a.constitute a moment b.constitute a couple c.are known as coplaner-concurrent forces. d.are known as non-coplaner forces e.107 dynes
by

1 Answer

Answer :

c. are known as coplaner-concurrent forces.
by

Related questions

When two concurrent and coplaner forces P and Q act at an angle of 180?, their resultant will be a a.moment equal to PQ b.couple c.(P-Q) d.107 dynes e.zero

Description : When two concurrent and coplaner forces P and Q act at an angle of 180?, their resultant will be a a.moment equal to PQ b.couple c.(P-Q) d.107 dynes e.zero

Last Answer : c. (P-Q)

Three forces A, B and C of magnitudes 8 N, 12 N and 20 N acting on a particle are in equilibrim. It can be concluded that a.107 dynes b.B and C act in opposite directions c.one of the forces in non-coplaner d.A and B act at 90? e.one of the forces is non-concurrent

Description : Three forces A, B and C of magnitudes 8 N, 12 N and 20 N acting on a particle are in equilibrim. It can be concluded that a.107 dynes b.B and C act in opposite directions c.one of the forces in non-coplaner d.A and B act at 90? e.one of the forces is non-concurrent

Last Answer : b. B and C act in opposite directions

The forces which meet at one point but their lines of action do not lie in one plane, are called a.Coplanar noncurrent forces b.Non-coplanar nonconcurrent forces c.Intersecting forces d.Coplanar concurrent forces e.

Description : The forces which meet at one point but their lines of action do not lie in one plane, are called a.Coplanar noncurrent forces b.Non-coplanar nonconcurrent forces c.Intersecting forces d.Coplanar concurrent forces e.

Last Answer : c. Non-coplanar nonconcurrent forces

The resultant of coplaner parallel forces is found by load line diagram, while the position is found by a.link polygen b.funicular polygon c.string polygon d.any of the above e.107 dynes

Description : The resultant of coplaner parallel forces is found by load line diagram, while the position is found by a.link polygen b.funicular polygon c.string polygon d.any of the above e.107 dynes

Last Answer : d. any of the above

The necessary condition for the forces acting on a body to be in equilibrium is that these should be a.In the same direction b.Coplaner c.Similar in nature d.Should not meet at a point e.(B) and (D) above

Description : The necessary condition for the forces acting on a body to be in equilibrium is that these should be a.In the same direction b.Coplaner c.Similar in nature d.Should not meet at a point e.(B) and (D) above

Last Answer : e. (B) and (D) above

If three non-parallel forces hold a rigid body in equilibrium, they must a.be non-coneurrent b.be colinear c.107 dynes d.be equal in magnitude e.be concurrent

Description : If three non-parallel forces hold a rigid body in equilibrium, they must a.be non-coneurrent b.be colinear c.107 dynes d.be equal in magnitude e.be concurrent

Last Answer : e. be concurrent

If the positive and negative shear force diagram areas are not equal, it can be concluded that a.shear force diagram has been wrongly drawn b.there is at least one couple acting on the beam c.107 dynes d.there are at least two maxima for bending moment e.bending moment does not change sign

Description : If the positive and negative shear force diagram areas are not equal, it can be concluded that a.shear force diagram has been wrongly drawn b.there is at least one couple acting on the beam c.107 dynes d.there are at least two maxima for bending moment e.bending moment does not change sign

Last Answer : b. there is at least one couple acting on the beam

When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Description : When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Last Answer : c. equal in magnitude

According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Description : According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Last Answer : e. same at every point in its line of action

The torque acting on a system is zero. Which of the following will be conserved? a.Angular velocity b.Linear momentum c.107 dynes d.Angular momentum e.Moment of inertia

Description : The torque acting on a system is zero. Which of the following will be conserved? a.Angular velocity b.Linear momentum c.107 dynes d.Angular momentum e.Moment of inertia

Last Answer : d. Angular momentum

The forces, which meet at one point, but their lines of action do not lie in a plane, are called (A) Coplanar non-concurrent forces (B) Non-coplanar concurrent forces(C) Non-coplanar non-concurrent forces (D) Intersecting forces

Description : The forces, which meet at one point, but their lines of action do not lie in a plane, are called  (A) Coplanar non-concurrent forces  (B) Non-coplanar concurrent forces (C) Non-coplanar non-concurrent forces  (D) Intersecting forces

Last Answer : (B) Non-coplanar concurrent forces 

A truss element a.107 dynes b.resists lateral forces c.is a two-force body d.is a three force body e.resist forces in compression only

Description : A truss element a.107 dynes b.resists lateral forces c.is a two-force body d.is a three force body e.resist forces in compression only

Last Answer : c. is a two-force body

A rigid body is in equilibrium under the action of these forces when a.These forces are equal b.The lines of action of these forces are parallel c.The lines of action of these forces meet in a point d.(A) and (B) above e.(B) and (C) above

Description : A rigid body is in equilibrium under the action of these forces when a.These forces are equal b.The lines of action of these forces are parallel c.The lines of action of these forces meet in a point d.(A) and (B) above e.(B) and (C) above

Last Answer : e. (B) and (C) above

Let the only force acting on two bodies be their mutual interactions. If both bodies start from rest, the distances travelled by each will be a a.proportional to the respective masses of the bodies b.107 dynes c.inversely proportional to the respective masses of the bodies d.directly proportional to the square of the respective masses of the bodies e.inversely proportional to the square of the respective masses of the bodies

Description : Let the only force acting on two bodies be their mutual interactions. If both bodies start from rest, the distances travelled by each will be a a.proportional to the respective masses of the ... masses of the bodies e.inversely proportional to the square of the respective masses of the bodies

Last Answer : c. inversely proportional to the respective masses of the bodies

A plane is inclinea at angle ? to horizontal. If a body can just rest on a plane, determine the least force to draw the body up the plance a.W sin2? b.2 W cos2? c.107 dynes d.W cos2? e.2 W sin2?

Description : A plane is inclinea at angle ? to horizontal. If a body can just rest on a plane, determine the least force to draw the body up the plance a.W sin2? b.2 W cos2? c.107 dynes d.W cos2? e.2 W sin2?

Last Answer : a. W sin2?

A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.107 dynes b.i + j + k c.2i + 3j d.zero e.i - j - k

Description : A force F = 2i + 3j - k is passing through the origin. Its moment about point (1, 1, 0) is a.107 dynes b.i + j + k c.2i + 3j d.zero e.i - j - k

Last Answer : b. i + j + k

Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of bodies near the earth's equator (due to rotation of earth) is more than the velocities of particles at the pole c.107 dynes d.A cyclist should move along a zig-zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Description : Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of ... zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Last Answer : e. The density of milk decreases when cream is taken out of milk

In case forces of 1 N, 2 N, 3 N, 4 N, 5 N and 6 N act in order along the sides of a regular hexagon, the resultant will be a.21 N b.107 dynes c.2 N d.6 N e.

Description : In case forces of 1 N, 2 N, 3 N, 4 N, 5 N and 6 N act in order along the sides of a regular hexagon, the resultant will be a.21 N b.107 dynes c.2 N d.6 N e.

Last Answer : d. 6 N

A block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height a.block A will have higher velocity than block B while hitting the ground b.block B will hit the ground earlier. c.both will hit the ground simultaneously d.block A will hit the ground earlier e.107 dynes

Description : A block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height a.block A will have higher velocity than block B while hitting the ... . c.both will hit the ground simultaneously d.block A will hit the ground earlier e.107 dynes

Last Answer : b. block B will hit the ground earlier.

A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating forward while going around a curve of radius equal to the maximum height attained by the ball c.107 dynes d.accelerating forwardA block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Description : A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating ... inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Last Answer : a. moving at constant velocity

A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

ML2T-2 could be the dimension of a.107 dynes b.moment of force c.viscosity d.mass moment of inertia e.momentum

Description : ML2T-2 could be the dimension of a.107 dynes b.moment of force c.viscosity d.mass moment of inertia e.momentum

Last Answer : b. moment of force

A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes

Description : A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes

Last Answer : b. two places

In case of cantilever, irrespective of the type of loading the maximum bendry moment and maximum shear force occur at a.107 dynes b.Free end c.2/3 of the length, from the free end d.Centre of the beam e.Fixed end

Description : In case of cantilever, irrespective of the type of loading the maximum bendry moment and maximum shear force occur at a.107 dynes b.Free end c.2/3 of the length, from the free end d.Centre of the beam e.Fixed end

Last Answer : e. Fixed end

If a gymnast sitting on a rotating stool, with his arms outstretched suddenly lowers his arm a.the angular velocity will remain constant b.the angular momentum will increase c.the angular velocity will decrease d.his moment of inertia will decrease e.107 dynes

Description : If a gymnast sitting on a rotating stool, with his arms outstretched suddenly lowers his arm a.the angular velocity will remain constant b.the angular momentum will increase c.the angular velocity will decrease d.his moment of inertia will decrease e.107 dynes

Last Answer : d. his moment of inertia will decrease

The polar moment of inertia of a hollow circular section whose external diameter is 8 cm and internal diameter of 6 cm will be a.137.5 cm4 b.107 dynes c.275 cm4 d.550 cm4 e.1100 cm4

Description : The polar moment of inertia of a hollow circular section whose external diameter is 8 cm and internal diameter of 6 cm will be a.137.5 cm4 b.107 dynes c.275 cm4 d.550 cm4 e.1100 cm4

Last Answer : c. 275 cm4

A couple consists of a force P acting at a point A whose coordinates are (-1,2,4) m and force - F acting at a point whose coordinates are (2,3, -2)m. If F = 3i + 2j - 4k in kg units the moment of the couple in kg - m units would be a.8i - 6j - 3k b.12i - 3j + k c.16i - 12j - 6k d.4i - 3j + k e.8i + 5j + 3k

Description : A couple consists of a force P acting at a point A whose coordinates are (-1,2,4) m and force - F acting at a point whose coordinates are (2,3, -2)m. If F = 3i + 2j - 4k in kg units the moment of the couple in kg - m ... .8i - 6j - 3k b.12i - 3j + k c.16i - 12j - 6k d.4i - 3j + k e.8i + 5j + 3k

Last Answer : a. 8i - 6j - 3k

A non-reversible machine has efficiency a.less than 50% b.nearly 100% c.between 75% and 99% d.more than 50% e.107 dynes

Description : A non-reversible machine has efficiency a.less than 50% b.nearly 100% c.between 75% and 99% d.more than 50% e.107 dynes

Last Answer : a. less than 50%

A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes

Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes

Last Answer : c. tangential acceleration

Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Description : Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Last Answer : d. A ball at its highest point of its rise when thrown up

What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Description : What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Last Answer : c. 78.94 mts/sec2

A flywheel 200 cm in diameter is rotating at 100 rpm. A point one the rim of the flywheel will not have a.angular velocity b.centripetal acceleration c.tangential acceleration d.all of the above e.107 dynes

Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point one the rim of the flywheel will not have a.angular velocity b.centripetal acceleration c.tangential acceleration d.all of the above e.107 dynes

Last Answer : a. angular velocity

A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Description : A body having SHM has period of 6 sec and amplitude of 4 mts. Maximum velocity is a.?/3 m/s b.2?/3 m/s c.107 dynes d.3? m/s e.4?/3 m/s

Last Answer : e. 4?/3 m/s

A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Description : A force of 100 Newtons acts for 0.5 seconds on a body of mass 20 kg which is initially at rest. The velocity attained by the body is a.20 m/s b.5 m/s c.2.5 m/s d.0.5 m/s e.107 dynes

Last Answer : c. 2.5 m/s

Which of the following could be the unit of rotational inertia of a body in CGS system? a.cm4 b.gm-cm2 c.107 dynes d.kg-cm2 e.gm-cm4

Description : Which of the following could be the unit of rotational inertia of a body in CGS system? a.cm4 b.gm-cm2 c.107 dynes d.kg-cm2 e.gm-cm4

Last Answer : b. gm-cm2

A body is pushed with a force of 10 N for 0.5 second. The impulse given to the body is a.107 dynes b.50 Ns c.3.5 Ns d.5 Ns e.2.5 Ns

Description : A body is pushed with a force of 10 N for 0.5 second. The impulse given to the body is a.107 dynes b.50 Ns c.3.5 Ns d.5 Ns e.2.5 Ns

Last Answer : d. 5 Ns

Which of the following statement is incorrect? a.A body can have energy without having momentum b.A body cannot have kinetic energy without having momentum c.A body in motion will always have kinetic energy more than the potential energy d.None of the above e.107 dynes

Description : Which of the following statement is incorrect? a.A body can have energy without having momentum b.A body cannot have kinetic energy without having momentum c.A body in motion will always have kinetic energy more than the potential energy d.None of the above e.107 dynes

Last Answer : c. A body in motion will always have kinetic energy more than the potential energy

Newton, dyne and poundal are known as a.absolute units b.fundamental units c.gravitational units d.absolute units e.107 dynes

Description : Newton, dyne and poundal are known as a.absolute units b.fundamental units c.gravitational units d.absolute units e.107 dynes

Last Answer : d. absolute units

The statement the resultant of the external forces applied to a body (rigid or non-rigid) composed of a system of particles is equivalent to the vector summation of the effective forces acting on all particles-is known as a.Corollary to Newton's laws of motion b.Principle of dynamics c.D' Alembert's principle d.Nowton's law e.Mohr's principle

Description : The statement the resultant of the external forces applied to a body (rigid or non-rigid) composed of a system of particles is equivalent to the vector summation of the effective forces acting on all ... motion b.Principle of dynamics c.D' Alembert's principle d.Nowton's law e.Mohr's principle

Last Answer : c. D' Alembert's principle

Forces are called concurrent when their lines of action meet in (A) One point (B) Two points (C) Plane (D) Perpendicular planes

Description : Forces are called concurrent when their lines of action meet in (A) One point (B) Two points (C) Plane (D) Perpendicular planes

Last Answer : (A) One point

Two non-collinear parallel equal forces acting in opposite direction (A) Balance each other (B) Constitute a moment (C) Constitute a couple (D) Constitute a moment of couple

Description : Two non-collinear parallel equal forces acting in opposite direction  (A) Balance each other  (B) Constitute a moment  (C) Constitute a couple  (D) Constitute a moment of couple 

Last Answer : (C) Constitute a couple 

A sphere of radius r is cut from larger sphere of radius R. The distance between their centre is a. The centroid of the remaining valoume lies on the line of centres and the sistanc from the centre of the larger sphere is a.ar2 / (R2 - r2) b.107 dynes c.aR/(R2-r2) d.aR/(R - r) e.ar3 / (R3 - r3)

Description : A sphere of radius r is cut from larger sphere of radius R. The distance between their centre is a. The centroid of the remaining valoume lies on the line of centres and the sistanc from the centre of the larger sphere is a.ar2 / (R2 - r2) b.107 dynes c.aR/(R2-r2) d.aR/(R - r) e.ar3 / (R3 - r3)

Last Answer : e. ar3 / (R3 - r3)

A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Description : A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Last Answer : c. 250

At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Description : At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Last Answer : b. 90?

What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Description : What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Last Answer : a. 0.35

A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8

Description : A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8

Last Answer : e. 8

An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Description : An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Last Answer : b. 6170 lb

A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Description : A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Last Answer : c. 5 m/s

A stone weighing 20 N is whirling in a vertical circle at the extremity of a string 100 cm long. The tension in the string will be zero a.at the highest position b.at the lowest position c.at the midway position d.at none of the above e.107 dynes

Description : A stone weighing 20 N is whirling in a vertical circle at the extremity of a string 100 cm long. The tension in the string will be zero a.at the highest position b.at the lowest position c.at the midway position d.at none of the above e.107 dynes

Last Answer : a. at the highest position

A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves towards the axis of rotation c.jumps out from the platform d.accepts a heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Description : A man is standing near the edge of a uniformly rotating platform about an axis passing through its centre. The speed of rotation of the platform will decrease if he a.extends his arms outwards b.moves ... heavy bag from one of his friends standing near by and holds it in his hand e.107 dynes

Last Answer : d. accepts a heavy bag from one of his friends standing near by and holds it in his hand