A car is travelling at 90 km/hour on a rough road where the coefficient of friction between the road and the tyre is 0.5. The distance the car will skid before stopping when the brakes are jammed suddenly would be a.127.4 m b.95.55 m c.63.7 m d.31.85 m e.90 m

A car is travelling at 90 km/hour on a rough road where the coefficient of friction between the road and the tyre is 0.5. The distance the car will skid before stopping when the brakes are jammed suddenly would be a.127.4 m b.95.55 m c.63.7 m d.31.85 m e.90 m
by

1 Answer

Answer :

c. 63.7 m
by

Related questions

A car travelling at a speed of 60 km/hour is braked and comes to rest 6 seconds after the brakes are applied. The minimum coefficient of driction between the wheels and the road would be a.0.107 b.0.3 c.0.283 d.0.417 e.0.5

Description : A car travelling at a speed of 60 km/hour is braked and comes to rest 6 seconds after the brakes are applied. The minimum coefficient of driction between the wheels and the road would be a.0.107 b.0.3 c.0.283 d.0.417 e.0.5

Last Answer : c. 0.283

Stopping distance of vehicles : When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is an important factor for road safety and depends on the initial velocity ( v 0 ) and the braking capacity, or deceleration, ?a that is caused by the braking. A car travelling at speed 72km/hr suddenly applies the brake with the deceleration of 5m/s2. Find the stopping distance of the car -Science

Description : Stopping distance of vehicles : When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is an important factor for road safety and depends on ... the brake with the deceleration of 5m/s2. Find the stopping distance of the car -Science

Last Answer : Here u=72 km/hr = 72×10003600m/s=2072×10003600m/s=20 m/s , v=0 a= -5 m/s2 Now using the relation v2=u2+2asv2=u2+2as 0=(20)2+2×(−5)×s0=(20)2+2×(−5)×s s=40ms=40m

In a braking test, a vehicle travelling at 36 km ph was stopped at a braking distance of 8.0 m. The average value of the vehicle's skid resistance (friction coefficient) is (A) 0.64 (B) 6.25 (C) 0.16 (D) None of these

Description : In a braking test, a vehicle travelling at 36 km ph was stopped at a braking distance of 8.0 m. The average value of the vehicle's skid resistance (friction coefficient) is (A) 0.64 (B) 6.25 (C) 0.16 (D) None of these

Last Answer : Answer: Option C

A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in 10 sec. The distance between the locomotive and the wagons at this instant assuming that the forces acting on the train are unaltered would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Description : A locomotive of weight 100 tonnes is attached to train of wagons weighing 1000 tonnes. The locomotive pulls the wagons with a constant velocity of 36 km/hour. When the coupling between the train and wagons breaks, the wagons roll on 95 m in ... would be a.0.36 m b.0.44 m c.0.77 m. d.0.5 m e.0.66 m

Last Answer : d. 0.5 m

A weight of 4.9 N rests on a rough horizontal floor that has a coefficient of friction of 0.5. If g = 9.8 m/s2, the smallest horizontal force that gives the weight an acceleration of 4m/s2 is most nearly a.2.5 N b.3 N c.2 N d.4.5 N e.4.9 N

Description : A weight of 4.9 N rests on a rough horizontal floor that has a coefficient of friction of 0.5. If g = 9.8 m/s2, the smallest horizontal force that gives the weight an acceleration of 4m/s2 is most nearly a.2.5 N b.3 N c.2 N d.4.5 N e.4.9 N

Last Answer : d. 4.5 N

An automobile is travelling at 25 m/s. It takes 0.3 second to apply the brakes after which the deceleration is 6 m/s2. How far, in meters, does the automobile travel before it stops? a.45 b.107 dynes c.40 d.50 e.60

Description : An automobile is travelling at 25 m/s. It takes 0.3 second to apply the brakes after which the deceleration is 6 m/s2. How far, in meters, does the automobile travel before it stops? a.45 b.107 dynes c.40 d.50 e.60

Last Answer : e. 60

A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Description : A cannon of weight 10 tonnes fires a shell of 50 kg with a muzzle velocity of 900 m/sec at an angle of 30?. The time taken for the shell to emerge from the barrel is 0.004 sec. The velocity of the cannon would be a.3.9 m/sec b.7.8 m/sec c.8.95 m/sec d.1.95 m/sec e.5.85 m/sec

Last Answer : a. 3.9 m/sec

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

A particle moves along a rough plane inclined at 30? to the horizontal. The co-efficient of friction between the particle and the plane is 0.1. Its initial velocity is 15 m/sec. The ratio of the velocity of the particle when it move down the plane to that when it move up the plane would be in the regions a.8 ? 10 b.5 ? 7 c.2 ? 3 d.4 ? 6 e.10 ? 13

Description : A particle moves along a rough plane inclined at 30? to the horizontal. The co-efficient of friction between the particle and the plane is 0.1. Its initial velocity is 15 m/sec. The ratio of the velocity of the particle when it move ... be in the regions a.8 ? 10 b.5 ? 7 c.2 ? 3 d.4 ? 6 e.10 ? 13

Last Answer : b. 5 ? 7

If you want to stop the car in the shortest distance on an icy road, you should a.107 dynes b.not apply the brakes c.pump' the brakes d.push hard the brakes to lock the wheels e.push just hard enough to prevent slipping

Description : If you want to stop the car in the shortest distance on an icy road, you should a.107 dynes b.not apply the brakes c.pump' the brakes d.push hard the brakes to lock the wheels e.push just hard enough to prevent slipping

Last Answer : e. push just hard enough to prevent slipping

The ideal angle of banking provided on roads a.Depends on (velocity)2 of vehicle b.Depends on the nature of road surface c.Depend on coefficient of friction between the road and the vehicle cantact point d.Depends on weight of the vehicle e.All above

Description : The ideal angle of banking provided on roads a.Depends on (velocity)2 of vehicle b.Depends on the nature of road surface c.Depend on coefficient of friction between the road and the vehicle cantact point d.Depends on weight of the vehicle e.All above

Last Answer : a. Depends on (velocity)2 of vehicle

A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m

Description : A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m

Last Answer : c. 0.8 m

A man wished to move a block of size 3 m x 3 m weighing 80 kg. The coefficient of friction between the block and the ground is 0.27. Which of the following methods should be used? a.Slide along the ground by pushing b.Ask for cranes c.Pull it d.Tip it over e.Lift it bodily

Description : A man wished to move a block of size 3 m x 3 m weighing 80 kg. The coefficient of friction between the block and the ground is 0.27. Which of the following methods should be used? a.Slide along the ground by pushing b.Ask for cranes c.Pull it d.Tip it over e.Lift it bodily

Last Answer : d. Tip it over

A crate weighing 40 kg rests on a cart moving with an acceleration W. The coefficient of friction between the cart and the crate is a.2.45 m/sec2 b.4.00 m/sec2 c.0.25 m/sec2 d.4.16 m/sec2 e.1.25 m/sec2

Description : A crate weighing 40 kg rests on a cart moving with an acceleration W. The coefficient of friction between the cart and the crate is a.2.45 m/sec2 b.4.00 m/sec2 c.0.25 m/sec2 d.4.16 m/sec2 e.1.25 m/sec2

Last Answer : a. 2.45 m/sec2

A car is travelling at 15 m s-1, the distance it will travel in 1 hour is A. 54 km B. 55 km C. 56 km D. 57 km

Description : A car is travelling at 15 m s-1, the distance it will travel in 1 hour is A. 54 km B. 55 km C. 56 km D. 57 km

Last Answer : 54 km

The value of acceleration due to gravity is 980 cm/sec2. Its value in meter per (hour)2 will be a.1.27 x 108 b.127 c.1270 d.1.27 x 107 e.1270000

Description : The value of acceleration due to gravity is 980 cm/sec2. Its value in meter per (hour)2 will be a.1.27 x 108 b.127 c.1270 d.1.27 x 107 e.1270000

Last Answer : a. 1.27 x 108

A particle inside a hollow sphere of internal radius r with coefficient of friction 1/?3 can rest upto height of a.0.18 r b.0.435 r c.0.25 r d.0.134 r e.0.125 r

Description : A particle inside a hollow sphere of internal radius r with coefficient of friction 1/?3 can rest upto height of a.0.18 r b.0.435 r c.0.25 r d.0.134 r e.0.125 r

Last Answer : d. 0.134 r

An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Description : An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Last Answer : b. 6170 lb

Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is (A) 80 m (B) 100 m (C) 120 m (D) 150 m

Description : Minimum stopping distance for moving vehicles on road with a design speed of 80 km/hour, is (A) 80 m (B) 100 m (C) 120 m (D) 150 m

Last Answer : Answer: Option C

Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Description : Which of the following bearing will have least coefficient of friction a.Single ball bearing b.Cylinderical roller bearing c.Self aligury bearing d.Thrust ball bearing e.Tapered bearing

Last Answer : e. Tapered bearing

The coefficient of friction is a.The tangent of the angle between the normal reaction and direction of limiting friction b.The tangent of the angle between the normal reaction and the resultant of the normal reaction and the limiting friction c.The tangent of the angle of the net resultant force with the direction of motion d.The tangent of the angle between the horizontal plane and the resultant force e.The angle between the normal reaction and the resultant of normal reaction and the limiting friction

Description : The coefficient of friction is a.The tangent of the angle between the normal reaction and direction of limiting friction b.The tangent of the angle between the normal reaction and the resultant ... e.The angle between the normal reaction and the resultant of normal reaction and the limiting friction

Last Answer : a. The tangent of the angle between the normal reaction and direction of limiting friction

The coefficient of static friction will have the highest value in case of a.Mild steel and mild steel b.Mild steel and copper c.Cast iron and steel d.Rope and wood e.Any of the above loctions

Description : The coefficient of static friction will have the highest value in case of a.Mild steel and mild steel b.Mild steel and copper c.Cast iron and steel d.Rope and wood e.Any of the above loctions

Last Answer : d. Rope and wood

A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Description : A gun fires shell with a muzzle velocity of 600 m/sec. The angle of inclination of the gun so that the shell hits a target at a distance of 32 km at level 100 m higher than the gun would be approximately? a.60? b.45? c.30? d.15? e.Either of (A) and (C)

Last Answer : e. Either of (A) and (C)

The slope on the road generally provided on the curves is known as a.Angle of repose b.Angle of friction c.Angle of banking d.Angle of reaction e.None of the above

Description : The slope on the road generally provided on the curves is known as a.Angle of repose b.Angle of friction c.Angle of banking d.Angle of reaction e.None of the above

Last Answer : c. Angle of banking

A man weighing 60 kg jumps on a vehicle of weight 240 kg moving with a velocity of 36 km/hours. The velocity of the vehicle after the man has jumped would be a.Less than 3.6 km/hour b.3.6 km/hour c.More than 3.6 km/hour d.4.5 km/hour e.None of the above

Description : A man weighing 60 kg jumps on a vehicle of weight 240 kg moving with a velocity of 36 km/hours. The velocity of the vehicle after the man has jumped would be a.Less than 3.6 km/hour b.3.6 km/hour c.More than 3.6 km/hour d.4.5 km/hour e.None of the above

Last Answer : a. Less than 3.6 km/hour

If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Description : If the coefficient of friction on the road surface is 0.15 and a maximum super-elevation 1 in 15 is provided, the maximum speed of the vehicles on a curve of 100 metre radius, is (A) 32.44 km/hour (B) 42.44 kg/hour (C) 52.44 km/hour (D) 62.44 km/hour

Last Answer : Answer: Option C

The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Description : The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Last Answer : a. 1.885 m/sec

A ball is dropped from a height of 2.25 m on a smooth floor and it rises to a height of 1 m after the first bounce. The coefficient of restitutions between the ball and the floor is a.107 dynes b.0.33 c.0.44 d.0.57 e.0.67

Description : A ball is dropped from a height of 2.25 m on a smooth floor and it rises to a height of 1 m after the first bounce. The coefficient of restitutions between the ball and the floor is a.107 dynes b.0.33 c.0.44 d.0.57 e.0.67

Last Answer : e. 0.67

A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of maximum compession of spring, neglecting friction to that while considering friction would be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Description : A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of ... be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Last Answer : a. More than one

If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Description : If the velocity of moving vehicles on a road is 24 km/per hour, stopping distance is 19 metres and average length of vehicles is 6 metres, the basic capacity of lane, is (A) 500 vehicles per hour (B) 700 vehicles per hour (C) 1000 vehicles per hour (D) 1250 vehicles per hour

Last Answer : Answer: Option C

A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the force exerted by the jet on the plate would be in the range a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Description : A jet of water of cross-sectional area 20 sq. cm impinges on a plate at an angle of 60? with a velocity of 10 m/sec. Neglecting the friction between the jet and plate (density of water 1000/9.81 kgm-1 sec2 per cubic meter), the ... a.15 - 20 kg b.20 - 25 kg c.5 - 10 kg d.25 - 30 kg e.10 - 15 kg

Last Answer : a. 15 - 20 kg

The angle of projection when the range is equal to the distance through which the particle would have fallen in order to acquire a velocity equal to the velocity of projection will be a.30? b.45? c.15? d.90? e.22

Description : The angle of projection when the range is equal to the distance through which the particle would have fallen in order to acquire a velocity equal to the velocity of projection will be a.30? b.45? c.15? d.90? e.22

Last Answer : c. 15?

The y-coordinate of the centroid of the area bounded by the x-axis, the line x = 3 and the parabola y = x2 will be a.2.7 b.2.55 c.107 dynes d.2.6 e.2.65

Description : The y-coordinate of the centroid of the area bounded by the x-axis, the line x = 3 and the parabola y = x2 will be a.2.7 b.2.55 c.107 dynes d.2.6 e.2.65

Last Answer : a. 2.7

What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Description : What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Last Answer : a. 0.35

The time required to stop a car moving with a velocity 20 m/sec within a distance of 40 m is equal to a.8 sec b.2 sec c.4 sec d.10 sec e.6 sec

Description : The time required to stop a car moving with a velocity 20 m/sec within a distance of 40 m is equal to a.8 sec b.2 sec c.4 sec d.10 sec e.6 sec

Last Answer : c. 4 sec

A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Description : A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Last Answer : a. 2 km

A satellite orbits the earth 200 km above the surface. What speed, in m/s, is necessary for a circular orbit? The radius of the earth is 6400 km and g = 9.2 m/s2 a.7200 b.6600 c.7800 d.6000 e.107 dynes

Description : A satellite orbits the earth 200 km above the surface. What speed, in m/s, is necessary for a circular orbit? The radius of the earth is 6400 km and g = 9.2 m/s2 a.7200 b.6600 c.7800 d.6000 e.107 dynes

Last Answer : c. 7800

Which of the following is scalar quantity a.Area of triangle b.Displacement of a particle c.Acceleration of car d.Force of friction e.Velocity a gear

Description : Which of the following is scalar quantity a.Area of triangle b.Displacement of a particle c.Acceleration of car d.Force of friction e.Velocity a gear

Last Answer : a. Area of triangle

A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Last Answer : e. 60.1 mts

For perfectly elastic bodies, the value of the coefficient of restitution is a.1 b.0.372 c.0.5 d.Zero e.Any value between 0 and 1

Description : For perfectly elastic bodies, the value of the coefficient of restitution is a.1 b.0.372 c.0.5 d.Zero e.Any value between 0 and 1

Last Answer : a. 1

For perfectly elastic bodies the value of the coefficient of restitution is a.0.707 b.0.5 c.1 d.0.25 e.Zero

Description : For perfectly elastic bodies the value of the coefficient of restitution is a.0.707 b.0.5 c.1 d.0.25 e.Zero

Last Answer : a. 0.707

The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is qN per kN, the maximum speed that the locomotive can attain on level track will be a.103 kmph b.83 kmph c.107 dynes d.43 kmph e.63 kmph

Description : The power of a locomotive is 315 kW and the total weight of the train is 2000 kN. If the track resistance is qN per kN, the maximum speed that the locomotive can attain on level track will be a.103 kmph b.83 kmph c.107 dynes d.43 kmph e.63 kmph

Last Answer : e. 63 kmph

If V is the design speed in km/hour and R is the radius of the curve of a hill road, the super￾elevation (A) e = V / 127 R (B) e = V² / 127 R (C) e = V ²/ 225 R (D) e = V / 225 R

Description : If V is the design speed in km/hour and R is the radius of the curve of a hill road, the super￾elevation (A) e = V / 127 R (B) e = V² / 127 R (C) e = V ²/ 225 R (D) e = V / 225 R

Last Answer : Answer: Option C

A train moving at 60 kilometers per hour is struck by a bullet moving 1000 m/sec at right angles to the train. The direction with which the bullet appears to strike the train would be a.75? b.60? c.22 d.30? e.45?

Description : A train moving at 60 kilometers per hour is struck by a bullet moving 1000 m/sec at right angles to the train. The direction with which the bullet appears to strike the train would be a.75? b.60? c.22 d.30? e.45?

Last Answer : e. 45?

Which of the following is not a unit of energy? a.Joule b.kW c.N-m d.Electron volt e.Watt-hour

Description : Which of the following is not a unit of energy? a.Joule b.kW c.N-m d.Electron volt e.Watt-hour

Last Answer : b. kW

The maximum efficiency of a scres jack having square threads and friction angle of 30 degree will be a.0.2 b.0.11 c.0.05 d.0.33 e.0.09

Description : The maximum efficiency of a scres jack having square threads and friction angle of 30 degree will be a.0.2 b.0.11 c.0.05 d.0.33 e.0.09

Last Answer : d. 0.33

A body is vibrating with simple harmonic motion of aplitude 5 cm frequency 10 vibrations per second. The maximum value of velocity in cm/s will be a.3.14 cm/s b.314 cm/s c.3140 cm/s d.31.4 cm/s e.31400 cm/s

Description : A body is vibrating with simple harmonic motion of aplitude 5 cm frequency 10 vibrations per second. The maximum value of velocity in cm/s will be a.3.14 cm/s b.314 cm/s c.3140 cm/s d.31.4 cm/s e.31400 cm/s

Last Answer : b. 314 cm/s

A truck of mass 5 ton is travelling on a horizontal road with 36 km hr^-1 stops on travelling 1 km after its engine fails suddenly.

Description : A truck of mass 5 ton is travelling on a horizontal road with 36 km hr^-1 stops on travelling 1 km after its engine fails suddenly.

Last Answer : A truck of mass 5 ton is travelling on a horizontal road with 36 km hr-1 stops on travelling ... similar distance same how much will the fraction be?

A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating forward while going around a curve of radius equal to the maximum height attained by the ball c.107 dynes d.accelerating forwardA block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Description : A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating ... inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Last Answer : a. moving at constant velocity