A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction
by

1 Answer

Answer :

c. Determinate but depends on the acceleration of the cylinder
by

Related questions

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Proportional to the coefficient of static friction b.Proportional to the coefficient of dynamic friction c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... c.Indeterminate d.Determinate but depends on the acceleration of the cylinder e.None of the above

Last Answer : c. Indeterminate

A weight of 4.9 N rests on a rough horizontal floor that has a coefficient of friction of 0.5. If g = 9.8 m/s2, the smallest horizontal force that gives the weight an acceleration of 4m/s2 is most nearly a.2.5 N b.3 N c.2 N d.4.5 N e.4.9 N

Description : A weight of 4.9 N rests on a rough horizontal floor that has a coefficient of friction of 0.5. If g = 9.8 m/s2, the smallest horizontal force that gives the weight an acceleration of 4m/s2 is most nearly a.2.5 N b.3 N c.2 N d.4.5 N e.4.9 N

Last Answer : d. 4.5 N

Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Description : Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Last Answer : a. greater than the dynamic driction

A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m

Description : A 5 m ladder of mass 25 kg is placed in a position where its inclination to a vertical wall is at 30?. A 100 kg man is to climb the ladder. If the coefficient of static friction is 0.25 the height along ladder at which the slipping will be induced would be a.2.4 m b.1.6 m c.0.8 m d.1.2 m e.0.5 m

Last Answer : c. 0.8 m

In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is proportional to the distance of the fibre from the load carrying end d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Description : In case of a beam subjected to pure bending a.107 dynes b.the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis c.the stress intensity in any fibre is ... d.the stress intensity in any fibre is uniform e.the nature of stress in any fibre is identical

Last Answer : b. the stress intensity in any fibre is proportional to the distance of the fibre from the neutral axis

A plane is inclinea at angle ? to horizontal. If a body can just rest on a plane, determine the least force to draw the body up the plance a.W sin2? b.2 W cos2? c.107 dynes d.W cos2? e.2 W sin2?

Description : A plane is inclinea at angle ? to horizontal. If a body can just rest on a plane, determine the least force to draw the body up the plance a.W sin2? b.2 W cos2? c.107 dynes d.W cos2? e.2 W sin2?

Last Answer : a. W sin2?

If you want to stop the car in the shortest distance on an icy road, you should a.107 dynes b.not apply the brakes c.pump' the brakes d.push hard the brakes to lock the wheels e.push just hard enough to prevent slipping

Description : If you want to stop the car in the shortest distance on an icy road, you should a.107 dynes b.not apply the brakes c.pump' the brakes d.push hard the brakes to lock the wheels e.push just hard enough to prevent slipping

Last Answer : e. push just hard enough to prevent slipping

In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal a.the force applied on A must be equal to that on B b.at least one man on side B should be removed c.infinite force will be required to be applied at both ends d.the force required on A must not be equal to that on B e.107 dynes

Description : In a tug of war, five men pull a rope to the left at A and six moen pull the rope at B. A weight of 5 kg is hung vertically from the centre of the rope. In order that the rope AB be horizontal ... to be applied at both ends d.the force required on A must not be equal to that on B e.107 dynes

Last Answer : c. infinite force will be required to be applied at both ends

Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Description : Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Last Answer : c. When we are ascending in a lift with acceleration of 4.9 m/s2

The maximum frictional force which comes into play when a body just begins to slide over the surface of another body is known as a.Kinetic friction b.Rolling friction c.Dynamic friction d.Limiting friction e.Sliding friction

Description : The maximum frictional force which comes into play when a body just begins to slide over the surface of another body is known as a.Kinetic friction b.Rolling friction c.Dynamic friction d.Limiting friction e.Sliding friction

Last Answer : d. Limiting friction

Let the only force acting on two bodies be their mutual interactions. If both bodies start from rest, the distances travelled by each will be a a.proportional to the respective masses of the bodies b.107 dynes c.inversely proportional to the respective masses of the bodies d.directly proportional to the square of the respective masses of the bodies e.inversely proportional to the square of the respective masses of the bodies

Description : Let the only force acting on two bodies be their mutual interactions. If both bodies start from rest, the distances travelled by each will be a a.proportional to the respective masses of the ... masses of the bodies e.inversely proportional to the square of the respective masses of the bodies

Last Answer : c. inversely proportional to the respective masses of the bodies

A imaginary planet has half the mass and half the radius of the earth. The acceleration of gravity at its surface would be a.9.8 m/s2 b.107 dynes c.4.9 m/s2 d.19.6 m/s2 e.2.45 m/s2

Description : A imaginary planet has half the mass and half the radius of the earth. The acceleration of gravity at its surface would be a.9.8 m/s2 b.107 dynes c.4.9 m/s2 d.19.6 m/s2 e.2.45 m/s2

Last Answer : d. 19.6 m/s2

Water rises in a capillary tube to a height h. It will rise to a height more than h. a.in a lift moving up with an acceleration b.in all the above cases c.107 dynes d.at the poles e.on the surface of moon

Description : Water rises in a capillary tube to a height h. It will rise to a height more than h. a.in a lift moving up with an acceleration b.in all the above cases c.107 dynes d.at the poles e.on the surface of moon

Last Answer : e. on the surface of moon

If a solid sphere rolls on a horizontal surface, then the ratio of its rotational kinetic energy to its total kinetic energy is a.1 ; 7 b.3 ; 7 c.107 dynes d.4 ; 7 e.2 ; 7

Description : If a solid sphere rolls on a horizontal surface, then the ratio of its rotational kinetic energy to its total kinetic energy is a.1 ; 7 b.3 ; 7 c.107 dynes d.4 ; 7 e.2 ; 7

Last Answer : e. 2 ; 7

If four turms of rope around a horizontal post will hold a 100 kg weight with a pull of 1 kg, then a.107 dynes b.0.25 c.0.18 d.0.3 e.0.11

Description : If four turms of rope around a horizontal post will hold a 100 kg weight with a pull of 1 kg, then a.107 dynes b.0.25 c.0.18 d.0.3 e.0.11

Last Answer : c. 0.18

Instantaneous centre for a rolling wheel on a straight track will be at a.107 dynes b.A c.B d.C e.D

Description : Instantaneous centre for a rolling wheel on a straight track will be at a.107 dynes b.A c.B d.C e.D

Last Answer : e. D

The ideal angle of banking provided on roads a.Depends on (velocity)2 of vehicle b.Depends on the nature of road surface c.Depend on coefficient of friction between the road and the vehicle cantact point d.Depends on weight of the vehicle e.All above

Description : The ideal angle of banking provided on roads a.Depends on (velocity)2 of vehicle b.Depends on the nature of road surface c.Depend on coefficient of friction between the road and the vehicle cantact point d.Depends on weight of the vehicle e.All above

Last Answer : a. Depends on (velocity)2 of vehicle

A ball is dropped from a height of 2.25 m on a smooth floor and it rises to a height of 1 m after the first bounce. The coefficient of restitutions between the ball and the floor is a.107 dynes b.0.33 c.0.44 d.0.57 e.0.67

Description : A ball is dropped from a height of 2.25 m on a smooth floor and it rises to a height of 1 m after the first bounce. The coefficient of restitutions between the ball and the floor is a.107 dynes b.0.33 c.0.44 d.0.57 e.0.67

Last Answer : e. 0.67

The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Description : The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Last Answer : c. the acceleration is 1.2 m/s2

A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes

Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes

Last Answer : c. tangential acceleration

Maximum acceleration in above problem is a.107 dynes b.2?2/3 m/s2 c.?2/s m/s2 d.3?2 m/s2 e.4?2/9 m/s2

Description : Maximum acceleration in above problem is a.107 dynes b.2?2/3 m/s2 c.?2/s m/s2 d.3?2 m/s2 e.4?2/9 m/s2

Last Answer : e. 4?2/9 m/s2

A block slides down a frictionless incline making an angle ? with an elevator floor. The acceleration relative to the incline will be maximum when a.the elevator ascends at constant speed v b.the elevator descends at constant speed v c.107 dynes d.elevator descends with deceleration a e.the elevator descends with acceleration a

Description : A block slides down a frictionless incline making an angle ? with an elevator floor. The acceleration relative to the incline will be maximum when a.the elevator ascends at constant speed v b. ... speed v c.107 dynes d.elevator descends with deceleration a e.the elevator descends with acceleration a

Last Answer : d. elevator descends with deceleration a

If a particle charges its angular velocity from 30 to 35 rpm in 20 seconds then it has angular acceleration of a.107 dynes b.30 rev/min2 c.10 rev/min2 d.20 rev/min2 e.15 rev/min2

Description : If a particle charges its angular velocity from 30 to 35 rpm in 20 seconds then it has angular acceleration of a.107 dynes b.30 rev/min2 c.10 rev/min2 d.20 rev/min2 e.15 rev/min2

Last Answer : e. 15 rev/min2

In the above problem, acceleration of crooshead at 30? phase equals a.107 dynes b.640 m/s2 c.780 m/s2 d.520 m/s2 e.870 m/s2

Description : In the above problem, acceleration of crooshead at 30? phase equals a.107 dynes b.640 m/s2 c.780 m/s2 d.520 m/s2 e.870 m/s2

Last Answer : e. 870 m/s2

The common acceleration will be a.1.5 m/s2 b.1.0 m/s2 c.107 dynes d.6 m/s2 e.3 m/s2

Description : The common acceleration will be a.1.5 m/s2 b.1.0 m/s2 c.107 dynes d.6 m/s2 e.3 m/s2

Last Answer : b. 1.0 m/s2

What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Description : What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Last Answer : c. 78.94 mts/sec2

A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Description : A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Last Answer : e. 7.64

A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Description : A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Last Answer : a. 10

A flywheel 200 cm in diameter is rotating at 100 rpm. A point one the rim of the flywheel will not have a.angular velocity b.centripetal acceleration c.tangential acceleration d.all of the above e.107 dynes

Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point one the rim of the flywheel will not have a.angular velocity b.centripetal acceleration c.tangential acceleration d.all of the above e.107 dynes

Last Answer : a. angular velocity

According to Kepler's law of motion the square of the time period T of a planet around the sun is proportional to the a.mean distance b.square of the mean distance of planet from sun c.cube of the mean distance of planet from sun d.107 dynes e.3/2 power of the mean distance

Description : According to Kepler's law of motion the square of the time period T of a planet around the sun is proportional to the a.mean distance b.square of the mean distance of planet from sun c.cube of the mean distance of planet from sun d.107 dynes e.3/2 power of the mean distance

Last Answer : c. cube of the mean distance of planet from sun

Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of bodies near the earth's equator (due to rotation of earth) is more than the velocities of particles at the pole c.107 dynes d.A cyclist should move along a zig-zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Description : Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of ... zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Last Answer : e. The density of milk decreases when cream is taken out of milk

A train travels between two stations 15 km apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform retardation, the maximum speed attained by the train during the journey will by a.125 km/hr b.107 dynes c.80 km/hr d.100 km/hr e.60 km/hr

Description : A train travels between two stations 15 km apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform retardation, the maximum speed attained by the train during the journey will by a.125 km/hr b.107 dynes c.80 km/hr d.100 km/hr e.60 km/hr

Last Answer : d. 100 km/hr

A train travels between two stations 15 km, apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform relardation, the maximum speed attained by the train, during, the journey, will be a.60 km/hr b.80 km/hr c.125 km/hr d.100 km/hr e.107 dynes

Description : A train travels between two stations 15 km, apart in 18 minutes. If the train accelerates for a part of journey uniformly followed by uniform relardation, the maximum speed attained by the train, during, the journey, will be a.60 km/hr b.80 km/hr c.125 km/hr d.100 km/hr e.107 dynes

Last Answer : d. 100 km/hr

What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Description : What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Last Answer : a. 0.35

A crate weighing 40 kg rests on a cart moving with an acceleration W. The coefficient of friction between the cart and the crate is a.2.45 m/sec2 b.4.00 m/sec2 c.0.25 m/sec2 d.4.16 m/sec2 e.1.25 m/sec2

Description : A crate weighing 40 kg rests on a cart moving with an acceleration W. The coefficient of friction between the cart and the crate is a.2.45 m/sec2 b.4.00 m/sec2 c.0.25 m/sec2 d.4.16 m/sec2 e.1.25 m/sec2

Last Answer : a. 2.45 m/sec2

A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Description : A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Last Answer : c. 5 m/s

A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Description : A horizontal load of 120 kg/mt is to be carried by a cable suspended between supports at same level and 60 mts apart. If the maximum permissible tension is 36,000 kg the required length of cable is a.63.3 mets b.62.5 mts c.60.8 mts d.107 dynes e.60.1 mts

Last Answer : e. 60.1 mts

When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?

Description : When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?

Last Answer : e. 76?

If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Description : If span is 150 mts and sag is 10 ft of a cable carrying a load of 3200 kg per horizontal metre then tension of ends is a.104,000 kg b.107 dynes c.1200,000 kg d.932,000 kg e.584,000 kg

Last Answer : d. 932,000 kg

The weight of a 72 kg man on earth's surface is a.100.3 N b.72 N c.107 dynes d.706.3 N e.760 N

Description : The weight of a 72 kg man on earth's surface is a.100.3 N b.72 N c.107 dynes d.706.3 N e.760 N

Last Answer : d. 706.3 N

The coefficient of friction is a.The tangent of the angle between the normal reaction and direction of limiting friction b.The tangent of the angle between the normal reaction and the resultant of the normal reaction and the limiting friction c.The tangent of the angle of the net resultant force with the direction of motion d.The tangent of the angle between the horizontal plane and the resultant force e.The angle between the normal reaction and the resultant of normal reaction and the limiting friction

Description : The coefficient of friction is a.The tangent of the angle between the normal reaction and direction of limiting friction b.The tangent of the angle between the normal reaction and the resultant ... e.The angle between the normal reaction and the resultant of normal reaction and the limiting friction

Last Answer : a. The tangent of the angle between the normal reaction and direction of limiting friction

A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Description : Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Last Answer : d. A ball at its highest point of its rise when thrown up

A car is travelling at 90 km/hour on a rough road where the coefficient of friction between the road and the tyre is 0.5. The distance the car will skid before stopping when the brakes are jammed suddenly would be a.127.4 m b.95.55 m c.63.7 m d.31.85 m e.90 m

Description : A car is travelling at 90 km/hour on a rough road where the coefficient of friction between the road and the tyre is 0.5. The distance the car will skid before stopping when the brakes are jammed suddenly would be a.127.4 m b.95.55 m c.63.7 m d.31.85 m e.90 m

Last Answer : c. 63.7 m

A particle moves along a rough plane inclined at 30? to the horizontal. The co-efficient of friction between the particle and the plane is 0.1. Its initial velocity is 15 m/sec. The ratio of the velocity of the particle when it move down the plane to that when it move up the plane would be in the regions a.8 ? 10 b.5 ? 7 c.2 ? 3 d.4 ? 6 e.10 ? 13

Description : A particle moves along a rough plane inclined at 30? to the horizontal. The co-efficient of friction between the particle and the plane is 0.1. Its initial velocity is 15 m/sec. The ratio of the velocity of the particle when it move ... be in the regions a.8 ? 10 b.5 ? 7 c.2 ? 3 d.4 ? 6 e.10 ? 13

Last Answer : b. 5 ? 7

Two identical weights are dropped simultaneously, one on water and the other in glycerine. Which of the following statement is correct? a.The weight will settle slowly in water but quickly in glycerine b.The weights will take same time to settle c.The water level will fall but glycerine level will rise d.The weight will settle quickly in water but slowly in glycerine e.107 dynes

Description : Two identical weights are dropped simultaneously, one on water and the other in glycerine. Which of the following statement is correct? a.The weight will settle slowly in water but quickly in glycerine ... level will rise d.The weight will settle quickly in water but slowly in glycerine e.107 dynes

Last Answer : d. The weight will settle quickly in water but slowly in glycerine

An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Description : An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Last Answer : b. 6170 lb

According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Description : According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Last Answer : e. same at every point in its line of action

A hammer gains 50 Ns momentum in 0.05 sec. The average force on the hammer will be a.500 N b.2000 N c.1500 N d.107 dynes e.1000 N

Description : A hammer gains 50 Ns momentum in 0.05 sec. The average force on the hammer will be a.500 N b.2000 N c.1500 N d.107 dynes e.1000 N

Last Answer : e. 1000 N

What is the maximum force, in Newtons, that will not cause tension? a.294 b.316 c.346 d.184 e.107 dynes

Description : What is the maximum force, in Newtons, that will not cause tension? a.294 b.316 c.346 d.184 e.107 dynes

Last Answer : a. 294