Water rises in a capillary tube to a height h. It will rise to a height more than h. a.in a lift moving up with an acceleration b.in all the above cases c.107 dynes d.at the poles e.on the surface of moon

Water rises in a capillary tube to a height h. It will rise to a height more than h. a.in a lift moving up with an acceleration b.in all the above cases c.107 dynes d.at the poles e.on the surface of moon
by

1 Answer

Answer :

e. on the surface of moon
by

Related questions

Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Description : Our weight will be zero under all of the following conditions EXCEPT a.107 dynes b.We are at the centre of the earth c.When we are ascending in a lift with acceleration of 4.9 m/s2 d.We are orbiting in a satellite e.When we are freely faling

Last Answer : c. When we are ascending in a lift with acceleration of 4.9 m/s2

A ball is dropped from a height of 2.25 m on a smooth floor and it rises to a height of 1 m after the first bounce. The coefficient of restitutions between the ball and the floor is a.107 dynes b.0.33 c.0.44 d.0.57 e.0.67

Description : A ball is dropped from a height of 2.25 m on a smooth floor and it rises to a height of 1 m after the first bounce. The coefficient of restitutions between the ball and the floor is a.107 dynes b.0.33 c.0.44 d.0.57 e.0.67

Last Answer : e. 0.67

A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating forward while going around a curve of radius equal to the maximum height attained by the ball c.107 dynes d.accelerating forwardA block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Description : A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating ... inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Last Answer : a. moving at constant velocity

A imaginary planet has half the mass and half the radius of the earth. The acceleration of gravity at its surface would be a.9.8 m/s2 b.107 dynes c.4.9 m/s2 d.19.6 m/s2 e.2.45 m/s2

Description : A imaginary planet has half the mass and half the radius of the earth. The acceleration of gravity at its surface would be a.9.8 m/s2 b.107 dynes c.4.9 m/s2 d.19.6 m/s2 e.2.45 m/s2

Last Answer : d. 19.6 m/s2

A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a.Indeterminate b.Proportional to the coefficient of dynamic friction c.Determinate but depends on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Description : A uniform cylinder of weight W is rolling while slipping on a rough horizontal surface under the influence of a horizontal force. The force of friction between the cylinder and the surface is a. ... on the acceleration of the cylinder d.107 dynes e.Proportional to the coefficient of static friction

Last Answer : c. Determinate but depends on the acceleration of the cylinder

The gravitational field intensity is maximum at the a.107 dynes b.at a height above the surface c.pole d.equator e.centre of the earth

Description : The gravitational field intensity is maximum at the a.107 dynes b.at a height above the surface c.pole d.equator e.centre of the earth

Last Answer : e. centre of the earth

A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Description : A machine requires an effort of 10 kg to lift a load of 250 kg and an effort of 13 kg for a load of 400 kg. The effort required to lift a load of 500 kg will be a.25 kg b.107 dynes c.15 kg d.35 kg e.45 kg

Last Answer : c. 15 kg

The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Description : The breaking strength of a rope is 400 N. A fireman weighing 60 kg slides down the rope. The rope will break if a.107 dynes b.the acceleration is 7.5 m/s2 c.the acceleration is 1.2 m/s2 d.the acceleration is 3.1 m/s2 e.the slides with an acceleration of 15 m/s2

Last Answer : c. the acceleration is 1.2 m/s2

A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes

Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point on the rim of the flywheel will not have a.angular velocity b.centripental acceleration c.tangential acceleration d.all of the above e.107 dynes

Last Answer : c. tangential acceleration

Maximum acceleration in above problem is a.107 dynes b.2?2/3 m/s2 c.?2/s m/s2 d.3?2 m/s2 e.4?2/9 m/s2

Description : Maximum acceleration in above problem is a.107 dynes b.2?2/3 m/s2 c.?2/s m/s2 d.3?2 m/s2 e.4?2/9 m/s2

Last Answer : e. 4?2/9 m/s2

A block slides down a frictionless incline making an angle ? with an elevator floor. The acceleration relative to the incline will be maximum when a.the elevator ascends at constant speed v b.the elevator descends at constant speed v c.107 dynes d.elevator descends with deceleration a e.the elevator descends with acceleration a

Description : A block slides down a frictionless incline making an angle ? with an elevator floor. The acceleration relative to the incline will be maximum when a.the elevator ascends at constant speed v b. ... speed v c.107 dynes d.elevator descends with deceleration a e.the elevator descends with acceleration a

Last Answer : d. elevator descends with deceleration a

If a particle charges its angular velocity from 30 to 35 rpm in 20 seconds then it has angular acceleration of a.107 dynes b.30 rev/min2 c.10 rev/min2 d.20 rev/min2 e.15 rev/min2

Description : If a particle charges its angular velocity from 30 to 35 rpm in 20 seconds then it has angular acceleration of a.107 dynes b.30 rev/min2 c.10 rev/min2 d.20 rev/min2 e.15 rev/min2

Last Answer : e. 15 rev/min2

In the above problem, acceleration of crooshead at 30? phase equals a.107 dynes b.640 m/s2 c.780 m/s2 d.520 m/s2 e.870 m/s2

Description : In the above problem, acceleration of crooshead at 30? phase equals a.107 dynes b.640 m/s2 c.780 m/s2 d.520 m/s2 e.870 m/s2

Last Answer : e. 870 m/s2

The common acceleration will be a.1.5 m/s2 b.1.0 m/s2 c.107 dynes d.6 m/s2 e.3 m/s2

Description : The common acceleration will be a.1.5 m/s2 b.1.0 m/s2 c.107 dynes d.6 m/s2 e.3 m/s2

Last Answer : b. 1.0 m/s2

What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Description : What is the total acceleration of a point on the rim of a flywheel 4 mts in diameter 0.6 see after it has started from rest if it accelarates uniformly from rest to 2000 rpm in 20 secs. a.68.9 mts/sec2 b.102.6 mts/sec2 c.78.94 mts/sec2 d.107 dynes e.33.2 mts/sec2

Last Answer : c. 78.94 mts/sec2

A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Description : A wheel accelerates from rest with an acceleration of 6 rad/sec2. How many revolutions are experienced in 4 seconds? a.12.36 b.25.6 c.9.82 d.107 dynes e.7.64

Last Answer : e. 7.64

A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Description : A roller coaster reaches a velocity of 20 m/s at a location where the radius of curvature is 40 m. Calculate the acceleration in m/s2? a.10 b.9 c.11 d.8 e.107 dynes

Last Answer : a. 10

A flywheel 200 cm in diameter is rotating at 100 rpm. A point one the rim of the flywheel will not have a.angular velocity b.centripetal acceleration c.tangential acceleration d.all of the above e.107 dynes

Description : A flywheel 200 cm in diameter is rotating at 100 rpm. A point one the rim of the flywheel will not have a.angular velocity b.centripetal acceleration c.tangential acceleration d.all of the above e.107 dynes

Last Answer : a. angular velocity

Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Description : Under which circumstances will have zero velocity and be still accelerating? a.The bob of a simple pendulum when at its mean position b.107 dynes c.A steamer while taking a turn d.A ball at its highest point of its rise when thrown up e.Tyres of a stationary automobile

Last Answer : d. A ball at its highest point of its rise when thrown up

Two identical weights are dropped simultaneously, one on water and the other in glycerine. Which of the following statement is correct? a.The weight will settle slowly in water but quickly in glycerine b.The weights will take same time to settle c.The water level will fall but glycerine level will rise d.The weight will settle quickly in water but slowly in glycerine e.107 dynes

Description : Two identical weights are dropped simultaneously, one on water and the other in glycerine. Which of the following statement is correct? a.The weight will settle slowly in water but quickly in glycerine ... level will rise d.The weight will settle quickly in water but slowly in glycerine e.107 dynes

Last Answer : d. The weight will settle quickly in water but slowly in glycerine

When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?

Description : When horizontal range of a projectile equal to the distance through which projectile will rise, then the angle of projection of the particle will be equal to a.36? b.24? c.48? d.107 dynes e.76?

Last Answer : e. 76?

The excape velocity for the moon is nearly a.5 km/s b.11.2 km/s c.107 dynes d.2.4 km/s e.1.1 km/s

Description : The excape velocity for the moon is nearly a.5 km/s b.11.2 km/s c.107 dynes d.2.4 km/s e.1.1 km/s

Last Answer : d. 2.4 km/s

A block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height a.block A will have higher velocity than block B while hitting the ground b.block B will hit the ground earlier. c.both will hit the ground simultaneously d.block A will hit the ground earlier e.107 dynes

Description : A block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height a.block A will have higher velocity than block B while hitting the ... . c.both will hit the ground simultaneously d.block A will hit the ground earlier e.107 dynes

Last Answer : b. block B will hit the ground earlier.

A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Description : A ball A of mass 0.25 kg moving on a smooth horizontal table with a velocity of 10 m/s strikes an identical stationary ball B on the table. If the impact is perfectly elastic, the velocity of the ball B just after the impact will be a.2.5 m/s b.zero c.5 m/s d.10 m/s e.107 dynes

Last Answer : c. 5 m/s

A bullet is fired vertically upwards with a velocity of 2200 ft/s. Bullet ascends to a height of a.56,900 ft b.107 dynes c.75,000 ft d.48.300 ft e.65,800 ft

Description : A bullet is fired vertically upwards with a velocity of 2200 ft/s. Bullet ascends to a height of a.56,900 ft b.107 dynes c.75,000 ft d.48.300 ft e.65,800 ft

Last Answer : c. 75,000 ft

A 2 kg block is dropped from a height of 4 metre onto a spring of force constant k = 1960 N/m. The spring will be compressed through a.1 cm b.4.5 cm c.3 cm d.8 cm e.107 dynes

Description : A 2 kg block is dropped from a height of 4 metre onto a spring of force constant k = 1960 N/m. The spring will be compressed through a.1 cm b.4.5 cm c.3 cm d.8 cm e.107 dynes

Last Answer : d. 8 cm

A stone dropped from a baloon that was ascending at the rate of 30 ft/sec, reaches ground after 10 secs. The height of the baloon where stone was dropped was a.3420 ft b.107 dynes c.4520 ft d.2310 ft e.1310 ft

Description : A stone dropped from a baloon that was ascending at the rate of 30 ft/sec, reaches ground after 10 secs. The height of the baloon where stone was dropped was a.3420 ft b.107 dynes c.4520 ft d.2310 ft e.1310 ft

Last Answer : e. 1310 ft

A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Description : A screw jack has 4 threads per inch. The mean radius of the thread is 2.338 inches. The mean diameter of the bearing surface under the cap is 3.25 inches. What is the turning moment required to raise the bload of 150 kg ( a.5.61 kg-inch b.50.6 kg-inch c.107 dynes d.30.3 kg-inch e.23.6 kg-inch

Last Answer : b. 50.6 kg-inch

The weight of a 72 kg man on earth's surface is a.100.3 N b.72 N c.107 dynes d.706.3 N e.760 N

Description : The weight of a 72 kg man on earth's surface is a.100.3 N b.72 N c.107 dynes d.706.3 N e.760 N

Last Answer : d. 706.3 N

A satellite orbits the earth 200 km above the surface. What speed, in m/s, is necessary for a circular orbit? The radius of the earth is 6400 km and g = 9.2 m/s2 a.7200 b.6600 c.7800 d.6000 e.107 dynes

Description : A satellite orbits the earth 200 km above the surface. What speed, in m/s, is necessary for a circular orbit? The radius of the earth is 6400 km and g = 9.2 m/s2 a.7200 b.6600 c.7800 d.6000 e.107 dynes

Last Answer : c. 7800

If a solid sphere rolls on a horizontal surface, then the ratio of its rotational kinetic energy to its total kinetic energy is a.1 ; 7 b.3 ; 7 c.107 dynes d.4 ; 7 e.2 ; 7

Description : If a solid sphere rolls on a horizontal surface, then the ratio of its rotational kinetic energy to its total kinetic energy is a.1 ; 7 b.3 ; 7 c.107 dynes d.4 ; 7 e.2 ; 7

Last Answer : e. 2 ; 7

A body whose true weight is 14 kg appears to weigh 15 kg when weighed with the help of a spring balance in a moving lift. The acceleration of the lift at the time was a.1 m/sec2 b.0.7 m/sec2 c.0.5 m/sec2 d.1.4 m/sec2 e.0.35 m/sec2

Description : A body whose true weight is 14 kg appears to weigh 15 kg when weighed with the help of a spring balance in a moving lift. The acceleration of the lift at the time was a.1 m/sec2 b.0.7 m/sec2 c.0.5 m/sec2 d.1.4 m/sec2 e.0.35 m/sec2

Last Answer : b. 0.7 m/sec2

At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Description : At a roller support the line of reaction and the roller base must be at an angle of a.60? b.90? c.not less than 60? d.not more than 60? e.107 dynes

Last Answer : b. 90?

A non-reversible machine has efficiency a.less than 50% b.nearly 100% c.between 75% and 99% d.more than 50% e.107 dynes

Description : A non-reversible machine has efficiency a.less than 50% b.nearly 100% c.between 75% and 99% d.more than 50% e.107 dynes

Last Answer : a. less than 50%

A bullet is fired from a fifle. If the rifle recoils freely, the kinetic energy of the rifle a.will be the same as the kinetic energy of the bullet b.will be less than the kinetic energy of the bullet c.107 dynes d.will be more than the kinetic energy of the bullet e.

Description : A bullet is fired from a fifle. If the rifle recoils freely, the kinetic energy of the rifle a.will be the same as the kinetic energy of the bullet b.will be less than the kinetic energy of the bullet c.107 dynes d.will be more than the kinetic energy of the bullet e.

Last Answer : b. will be less than the kinetic energy of the bullet

For a self locking lifting machine, the efficiency must be a.50 percent b.100 percent c.more than 50 percent d.107 dynes e.less than 50 percent

Description : For a self locking lifting machine, the efficiency must be a.50 percent b.100 percent c.more than 50 percent d.107 dynes e.less than 50 percent

Last Answer : e. less than 50 percent

When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Description : When two forces acting at a point are such that if the direction of one is reversed, the direction of the resultant is turned through a right angle, the forces must be a.inclined at more than 90? b.inclined at less than 90? c.equal in magnitude d.acting at 180? e.107 dynes

Last Answer : c. equal in magnitude

The springs A and B are identical except that A is stiffer than B, that is KA > kB. If both the springs are stretched by the same amount a.more work will be expended on A than B b.same work will be expended in both springs. c.less work will be expended on A than B d.107 dynes e.

Description : The springs A and B are identical except that A is stiffer than B, that is KA > kB. If both the springs are stretched by the same amount a.more work will be expended on A than B b.same work will be expended in both springs. c.less work will be expended on A than B d.107 dynes e.

Last Answer : a. more work will be expended on A than B

Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Description : Static friction is always a.greater than the dynamic driction b.either greater or more than the dynamic friction c.less than the dynamic friction d.107 dynes e.equal to the dynamic friction

Last Answer : a. greater than the dynamic driction

Which of the following statement is incorrect? a.A body can have energy without having momentum b.A body cannot have kinetic energy without having momentum c.A body in motion will always have kinetic energy more than the potential energy d.None of the above e.107 dynes

Description : Which of the following statement is incorrect? a.A body can have energy without having momentum b.A body cannot have kinetic energy without having momentum c.A body in motion will always have kinetic energy more than the potential energy d.None of the above e.107 dynes

Last Answer : c. A body in motion will always have kinetic energy more than the potential energy

Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of bodies near the earth's equator (due to rotation of earth) is more than the velocities of particles at the pole c.107 dynes d.A cyclist should move along a zig-zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Description : Which of the following statement is false? a.The potential energy of a particle has the form Ep = k2x. The force acting on the particle is constant (k is a constant) b.The linear velocity of ... zag path while ascending a steep hill e.The density of milk decreases when cream is taken out of milk

Last Answer : e. The density of milk decreases when cream is taken out of milk

A cable is supported at A and B, in which B is higher than A. The tension in the cable will be maximum at a.A b.A and B c.C d.B e.107 dynes

Description : A cable is supported at A and B, in which B is higher than A. The tension in the cable will be maximum at a.A b.A and B c.C d.B e.107 dynes

Last Answer : d. B

A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8

Description : A projectile is shot straight up with vo = 40 m/s. After how many seconds will it return if drag is neglected? a.6 b.107 dynes c.4 d.10 e.8

Last Answer : e. 8

Secondary stresses may be set up in frame due to any of the following reasons EXCEPT a.members not being straight b.self-weight of the members c.eccentricity of connections d.rigidity of the members e.107 dynes

Description : Secondary stresses may be set up in frame due to any of the following reasons EXCEPT a.members not being straight b.self-weight of the members c.eccentricity of connections d.rigidity of the members e.107 dynes

Last Answer : d. rigidity of the members

A plane is inclinea at angle ? to horizontal. If a body can just rest on a plane, determine the least force to draw the body up the plance a.W sin2? b.2 W cos2? c.107 dynes d.W cos2? e.2 W sin2?

Description : A plane is inclinea at angle ? to horizontal. If a body can just rest on a plane, determine the least force to draw the body up the plance a.W sin2? b.2 W cos2? c.107 dynes d.W cos2? e.2 W sin2?

Last Answer : a. W sin2?

A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Description : A grinding wheel rotates at 3000 rpm. When power supply is cut off the wheel stops in 5 sec. The number of revolutions made by the wheel before coming to rest would be a.500 b.107 dynes c.250 d.3000 e.1000

Last Answer : c. 250

What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Description : What force is necessary to hold a weight of 100 kg suspended on a rope wrapped 3 times around a post ( a.0.35 b.0.8 c.1.46 d.2.85 e.107 dynes

Last Answer : a. 0.35

An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Description : An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Last Answer : b. 6170 lb

According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Description : According to principle of transmissiblity of forces, when a force acts upon a body, its effect is a.maximum when it acts at C.G. of the body b.minimum when it acts at C.G. of the body c.different at different points of the body d.107 dynes e.same at every point in its line of action

Last Answer : e. same at every point in its line of action

A stone weighing 20 N is whirling in a vertical circle at the extremity of a string 100 cm long. The tension in the string will be zero a.at the highest position b.at the lowest position c.at the midway position d.at none of the above e.107 dynes

Description : A stone weighing 20 N is whirling in a vertical circle at the extremity of a string 100 cm long. The tension in the string will be zero a.at the highest position b.at the lowest position c.at the midway position d.at none of the above e.107 dynes

Last Answer : a. at the highest position