Description : For Q 45, Tangent vector for line L2 a.i+4j-k b.2i+4j+k c.i-4j-2k d.i+4j+2k
Last Answer : d.i+4j+2k
Description : Secondary Linear Axes U,V & W are ……… to X,Y & Z-axis. a.Perpendicular b.Parallel c.Rotational d.All of the above
Last Answer : b.Parallel
Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre
Last Answer : d.Line Joining Chuck centre & tail stock centre
Description : In modeling of a tabulated cylinder, the plane of the curve is _______ a.along the curve b.normal to the curve c.along the axis of the cylinder d.perpendicular to the axis of the cylinder
Last Answer : d.perpendicular to the axis of the cylinder
Description : The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing
Last Answer : a.Rotation
Description : The technology is defined as the sophistication of a plant ,any equipment or any machine etc a.TRUE b.FALSE c.D d.
Last Answer : b.FALSE
Description : If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.
Description : Cellular manufacturing is not a application of thought of group technology. a.TRUE b.FALSE c.D d.
Last Answer : a.TRUE
Description : The technology is defined as the sophistication of a plant ,any equipment or anymachine etc a.TRUE b.FALSE c. d.
Description : The time duration of useful life of any product is known as a product's life cycle. a.TRUE b.FALSE c. d.
Description : The technology life cycle concerned with the time and cost of developing the technology a.TRUE b.FALSE c. d.
Description : Explicit support structures are not required in Selective Laser Sintering (SLS). a.TRUE b.FALSE c. d.
Description : In Selective Laser Sintering, laser light is also being used. a.TRUE b.FALSE c. d.
Description : Machining is never used for rapid prototyping because it takes too long. a.TRUE b.FALSE c. d.
Description : An absolute NC system is one in which all position coordinates are referred to one fixedorigin called the zero point. a.TRUE b.FALSE c. d.
Description : For CNC machining skilled part programmers are needed. a.TRUE b.FALSE c. d.
Description : Co-ordinates are ranging according to the screen resolution. a.TRUE b.FALSE c. d.
Description : Panning is a technique in which users can change the size of the area to beviewed in order to see more detail or less detail. a.TRUE b.FALSE c. d.
Description : The process of mapping a world window in World Coordinates to the Viewportis called Viewing transformation. a.TRUE b.FALSE c. d.
Description : Reversing the order in which a sequence of transformations is performed may affect thetransformed position of an object. a.TRUE b.FALSE c. d.
Description : Two successive translations are commutative. a.TRUE b.FALSE c. d.
Description : Shearing and reflection are types of translation. a.TRUE b.FALSE c. d.
Description : Reflection is a special case of rotation. a.TRUE b.FALSE c. d.
Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)
Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)
Description : Match the following: NC code DefinitionP. M05 1. Absolute coordinate system Q. G01 2. Dwell R. G04 3. Spindle stop S. G09 4. Linear interpolation a.P-2, Q-3, R-4, S-1 b.P-3, Q-4, R-1, S-2 c.P-3, Q-4, R-2, S-1 d.P-4, Q-3, R-2, S-1
Last Answer : c.P-3, Q-4, R-2, S-1
Description : For Q 51, find coordinates of point on circle at u=0 a.11.6, 7 b.7, 11 c.11, 7 d.11.5, 7.5
Last Answer : a.11.6, 7
Description : For Q 51, find radius of circle a.3 b.3.6 c.4 d.3.5
Last Answer : b.3.6
Description : STL file format is represented by interaction of ______ a.lines and hexagons b.lines and rectangles c.lines and triangles d.lines and circles
Last Answer : c.lines and triangles
Description : STL file converts curved surfaces into_______ a.Polygons b.Lines c.Surfaces d.None of the above
Last Answer : a.Polygons
Description : Two lines L1 and L2 having Parametric equations are P1=[3 4 7]+u[2 2 -6] and P2=[15 -2]+u[1 4 2]. Tangent vector for line L1 a.2i+2j-6k b.2i+2j+6k c.2i-2j-6k d.6-2j-2k
Last Answer : a.2i+2j-6k
Description : Two lines are parallel when a.P1 X P2=0 b.P1 . P2=0 c.P1 = P2 d.P1+ P2=0
Last Answer : a.P1 X P2=0
Description : Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.
Last Answer : b.Teach pendant is used for manual teaching.
Description : Which of the following is true for the stiffness matrix (K)? a.K is a banded matrix b.K is un-symmetric c.K is an un-banded matrix d.none of the above
Last Answer : a.K is a banded matrix
Description : To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following? a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above
Last Answer : b.Hermite Cubic Spline Curve
Description : To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above
Description : Which of the following is NOT true?Image formed by reflection through a plane mirror is a.of same size b.same orientation c.is at same distance from the mirror d.virtual
Last Answer : b.same orientation
Description : If two pure reflections about a line passing through the origin are appliedsuccessively the result is a.Pure rotation b.Quarter rotation c.Half rotation d.True reflection
Last Answer : a.Pure rotation
Description : If the slopes of two lines are negative reciprocals, the lines are perpendicular. true or false?
Last Answer : true (APEX)
Description : While designing a forging, the profile is selected such that the fibrous lines are parallel to the tensile forces and perpendicular to shear forces. a) True b) False
Last Answer : a) True
Description : A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None
Last Answer : c.High Production
Description : --------is a manufacturing system in which sequence of operation is fixed by equipmentconfiguration a.Flexible b.Programmable c.Fixed d.All of above
Last Answer : c.Fixed
Description : Which manufacturing system is best suited for batch production a.Flexible b.Programmable c.Fixed d.All of above
Last Answer : b.Programmable
Description : Which automation is suited for high production quantities a.Flexible b.Programmable c.Fixed d.All of above
Description : A use computer to automatically generate process plans is? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies
Last Answer : c.Higher-level strategies
Description : Use computers for storage and retrieval of the data for the process plans are? a.Lower-level strategies b.Intermediate strategies c.Higher-level strategies d.Morden-level strategies
Last Answer : a.Lower-level strategies
Description : Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining
Last Answer : c.Additional holes, teeth and forming
Description : Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining
Last Answer : d.Plane surface machining
Description : Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining
Last Answer : c.Rotational machining
Description : Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining
Last Answer : b.Main shape
Description : Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining
Last Answer : a.Part class