Description : The time duration of useful life of any product is known as a product's life cycle. a.TRUE b.FALSE c. d.
Last Answer : b.FALSE
Description : The technology is defined as the sophistication of a plant ,any equipment or any machine etc a.TRUE b.FALSE c.D d.
Description : Cellular manufacturing is not a application of thought of group technology. a.TRUE b.FALSE c.D d.
Last Answer : a.TRUE
Description : The technology is defined as the sophistication of a plant ,any equipment or anymachine etc a.TRUE b.FALSE c. d.
Description : Which of the following is a stage of Product Life Cycle? a.Introduction stage b.Growth stage c.Mature stage d.All of the above
Last Answer : d.All of the above
Description : If the production is done according to change in various product design easily then suchmanufacturing system is called as flexible system. a.TRUE b.FALSE c.D d.
Description : Explicit support structures are not required in Selective Laser Sintering (SLS). a.TRUE b.FALSE c. d.
Description : In Selective Laser Sintering, laser light is also being used. a.TRUE b.FALSE c. d.
Description : Machining is never used for rapid prototyping because it takes too long. a.TRUE b.FALSE c. d.
Description : An absolute NC system is one in which all position coordinates are referred to one fixedorigin called the zero point. a.TRUE b.FALSE c. d.
Description : For CNC machining skilled part programmers are needed. a.TRUE b.FALSE c. d.
Description : For Q 45, Lines are perpendicular? a.TRUE b.FALSE c.D d.
Description : Co-ordinates are ranging according to the screen resolution. a.TRUE b.FALSE c. d.
Description : Panning is a technique in which users can change the size of the area to beviewed in order to see more detail or less detail. a.TRUE b.FALSE c. d.
Description : The process of mapping a world window in World Coordinates to the Viewportis called Viewing transformation. a.TRUE b.FALSE c. d.
Description : Reversing the order in which a sequence of transformations is performed may affect thetransformed position of an object. a.TRUE b.FALSE c. d.
Description : Two successive translations are commutative. a.TRUE b.FALSE c. d.
Description : Shearing and reflection are types of translation. a.TRUE b.FALSE c. d.
Description : Reflection is a special case of rotation. a.TRUE b.FALSE c. d.
Description : Which of the following is the process in the RP cycle? a.Post-processing b.Transfer to machine c.Pre-processing d.All of the above
Description : In CNC programming …….. is commonly used canned cycle for Stock removal cycle a.G71 b.G72 c.G73 d.G74
Last Answer : d.G74
Description : Repetitive CNC machine operations conveniently performing and execute with onecommand instead of programming of series of individual move called ….. a.Common Cycle b.Incremental Programming c.Canned Cycle d.None of the above
Last Answer : c.Canned Cycle
Description : In a CNC program block, N05 GO1 G91 G33 X20 Z-40 K5……, K refer to a.Depth of cut b.Pitch c.Multiple Threading Cycle d.Feed
Last Answer : b.Pitch
Description : Cellular manufacturing is also known as_______ a.Manufacturing Technology b.Production Technology c.Group Technology d.None of the above
Last Answer : c.Group Technology
Description : ____ is a highly automated group of GT machine cell. a.Flexible manufacturing system b.Group technology c.Automated system d.None of the above
Last Answer : a.Flexible manufacturing system
Description : ____ is a manufacturing philosophy in which different parts are manufactured in a small batchor group based on similarities a.Production technology b.Group technology c.Flexible manufacturing system d.None of the above
Last Answer : b.Group technology
Description : Which of the following RP system is not developed by 3D systems? a.Selective Laser Sintering (SLS) b.Multi-Jet Modeling System (MJM) c.Paper Lamination Technology (PLT) d.Stereolithography Apparatus (SLA)
Last Answer : c.Paper Lamination Technology (PLT)
Description : Which of the following is not Solid-based RP system? a.Laminated Object Manufacturing (LOM) b.Paper Lamination Technology (PLT) c.Electron Beam Melting (EBM) d.Fused Deposition Modeling (FDM)
Last Answer : c.Electron Beam Melting (EBM)
Description : From the following which is the benefits of AS/RS a.Less product damage b.Good and easy housekeeping in FMS c.Reduce labour cost d.All of the above
Description : Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.
Last Answer : b.Teach pendant is used for manual teaching.
Description : Which of the following is true for the stiffness matrix (K)? a.K is a banded matrix b.K is un-symmetric c.K is an un-banded matrix d.none of the above
Last Answer : a.K is a banded matrix
Description : To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following? a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above
Last Answer : b.Hermite Cubic Spline Curve
Description : To determine the coefficients of the equation – two end-points and the two tangentvectors. This statement is true for which of the following a.B-spline curve b.Hermite Cubic Spline Curve c.Beizer curve d.none of the above
Description : Which of the following is NOT true?Image formed by reflection through a plane mirror is a.of same size b.same orientation c.is at same distance from the mirror d.virtual
Last Answer : b.same orientation
Description : If two pure reflections about a line passing through the origin are appliedsuccessively the result is a.Pure rotation b.Quarter rotation c.Half rotation d.True reflection
Last Answer : a.Pure rotation
Description : In “Product Life Cycle†in _______ stage market becomes saturated a.Mature stage b.Growth stage c.Decline stage d.Introduction stage
Last Answer : a.Mature stage
Description : In “Product Life Cycle†a stage in which buyers move on to other products and salesdrop is known as_____. a.Growth stage b.Introduction stage c.Mature stage d.Decline stage
Last Answer : d.Decline stage
Description : In “Product Life Cycle†a stage represents a new and previously unknown product forbuyers known as_____. a.Mature stage b.Introduction stage c.Decline stage d.None of the above
Last Answer : b.Introduction stage
Description : In “Product Life Cycle†a stage represents rapid growth of product sale known as_____. a.Saturation stage b.Mature stage c.Growth stage d.Introduction stage
Last Answer : c.Growth stage
Description : From which of the following is benefit of computer integrated manufacturing(CIM). a.Reduced lead time b.Increased production time c.Reduced productivity d.All of the above
Last Answer : a.Reduced lead time
Description : Form which of the following is the objective of cellular manufacturing. a.Reduced manufacturing lead time b.Increased in quality c.Reduced setup time d.All of the above
Description : What type of inner structure can be used to reduce the printing time of the model in RP? a.Higher resolution b.Smaller polygons c.Lower resolution d.None of the above
Last Answer : c.Lower resolution
Description : In 4D printing, which one is the fourth dimension? a.Time b.Material c.Sound d.Light
Last Answer : a.Time
Description : Which of the following advantage does not possess by the rapid prototyping process over thetraditional prototyping process? a.It consumes less time b.Gives better quality c.Reduces product launch time d.It's cheaper
Last Answer : d.It's cheaper
Description : In CNC systems multiple microprocessors and programmable logic controllers work a.in parallel b.in series c.one after the other d.for 80% of the total machining time
Last Answer : a.in parallel
Description : In the following three-dimensional modelling techniques. Which do not requiremuch computer time and memory? a.Surface modelling b.Solid modelling c.Wireframe modelling d.All of the above
Last Answer : c.Wireframe modelling
Description : A company is producing 15000 mobiles annually. Determine production scale of company a.Low Production b.Medium Production c.High Production d.None
Last Answer : c.High Production
Description : --------is a manufacturing system in which sequence of operation is fixed by equipmentconfiguration a.Flexible b.Programmable c.Fixed d.All of above
Last Answer : c.Fixed
Description : Which manufacturing system is best suited for batch production a.Flexible b.Programmable c.Fixed d.All of above
Last Answer : b.Programmable
Description : Which automation is suited for high production quantities a.Flexible b.Programmable c.Fixed d.All of above