Which of the following is NOT true?Image formed by reflection through a plane mirror is a.of same size b.same orientation c.is at same distance from the mirror d.virtual

Which of the following is NOT true?Image formed by reflection through a plane mirror is a.of same size b.same orientation c.is at same distance from the mirror d.virtual
by

1 Answer

Answer :

b.same orientation
by

Related questions

In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Description : In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Last Answer : b.(10, 5)

Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.

Description : Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.

Last Answer : c.Reflection axis

If two pure reflections about a line passing through the origin are appliedsuccessively the result is a.Pure rotation b.Quarter rotation c.Half rotation d.True reflection

Description : If two pure reflections about a line passing through the origin are appliedsuccessively the result is a.Pure rotation b.Quarter rotation c.Half rotation d.True reflection

Last Answer : a.Pure rotation

The transformation that is used to alter the size of an object is a.Scaling b.Rotation c.Translation d.Reflection

Description : The transformation that is used to alter the size of an object is a.Scaling b.Rotation c.Translation d.Reflection

Last Answer : a.Scaling

The image of an object formed in a plane mirror (a) is real (b) is virtual (c) can be obtained on screen (d) is slightly shorter than the object

Description : The image of an object formed in a plane mirror (a) is real (b) is virtual (c) can be obtained on screen (d) is slightly shorter than the object

Last Answer : Ans:(b)

A virtual image can be formed by one or more of the following single mirrors? Identify them. w) plane mirror x) concave spherical mirror y) convex spherical mirror z) all of the above

Description : A virtual image can be formed by one or more of the following single mirrors? Identify them. w) plane mirror x) concave spherical mirror y) convex spherical mirror z) all of the above

Last Answer : ANSWER: Z -- ALL OF THE ABOVE (accept: A, B and C) 

Among the following, which one is the earliest step in Data Processing for RapidPrototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Description : Among the following, which one is the earliest step in Data Processing for RapidPrototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Last Answer : b.Part orientation

Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Description : Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Last Answer : c.Tool path generation

Shearing and reflection are types of translation. a.TRUE b.FALSE c. d.

Description : Shearing and reflection are types of translation. a.TRUE b.FALSE c. d.

Last Answer : b.FALSE

Reflection is a special case of rotation. a.TRUE b.FALSE c. d.

Description : Reflection is a special case of rotation. a.TRUE b.FALSE c. d.

Last Answer : b.FALSE

By changing the dimensions of the viewport, the and ofthe objects being displayed can be manipulated. a.Number of pixels and image quality b.X co-ordinate and Y co-ordinate c.Size and proportions d.All of these

Description : By changing the dimensions of the viewport, the and ofthe objects being displayed can be manipulated. a.Number of pixels and image quality b.X co-ordinate and Y co-ordinate c.Size and proportions d.All of these

Last Answer : c.Size and proportions

The size of the image formed by a plane mirror is a) bigger than the object b)same as object c)smaller than the object d)far away from the object .

Description : The size of the image formed by a plane mirror is a) bigger than the object b)same as object c)smaller than the object d)far away from the object .

Last Answer : b)same as object

The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing

Description : The rotation axis that is perpendicular to the xy plane and passes through the pivot pointis known as a.Rotation b.Translation c.Scaling d.Shearing

Last Answer : a.Rotation

Reflection about the line y=0, the axis, is accomplished with the transformationmatrix with how many elements as ‘0’? a.8 b.9 c.4 d.6

Description : Reflection about the line y=0, the axis, is accomplished with the transformationmatrix with how many elements as ‘0’? a.8 b.9 c.4 d.6

Last Answer : d.6

What is the determinant of the pure reflection matrix? a.1 b.0 c.-1 d.2

Description : What is the determinant of the pure reflection matrix? a.1 b.0 c.-1 d.2

Last Answer : c.-1

Drawing of number of copies of the same image in rows and columns acrossthe interface window so that they cover the entire window is called a.Roaming b.Panning c.Zooming d.Tiling

Description : Drawing of number of copies of the same image in rows and columns acrossthe interface window so that they cover the entire window is called a.Roaming b.Panning c.Zooming d.Tiling

Last Answer : d.Tiling

The size of an image formed by a plane mirror is _____.

Description : The size of an image formed by a plane mirror is _____.

Last Answer : The size of an image formed by a plane mirror is _____. A. larger than the size of the object. ... the size of the object. D. Cannot be determined.

A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Description : A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Last Answer : d.Virtual Prototype

The distance between a convex lens and a plane mirror is 15 cm. The parallel rays incident on the convex lens, after reflection from the mirror, form

Description : The distance between a convex lens and a plane mirror is 15 cm. The parallel rays incident on the convex lens, after reflection from the mirror, form

Last Answer : The distance between a convex lens and a plane mirror is 15 cm. The parallel rays incident on the ... and find out the focal length of the lens.

Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Description : Digit 5 in Opitz system is for_________ a.Part class b.Main shape c.Additional holes, teeth and forming d.Plane surface machining

Last Answer : c.Additional holes, teeth and forming

Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 4 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : d.Plane surface machining

Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 3 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : c.Rotational machining

Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 2 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : b.Main shape

Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Description : Digit 1 in Opitz system is for_________ a.Part class b.Main shape c.Rotational machining d.Plane surface machining

Last Answer : a.Part class

In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth

Description : In Opitz system, 2nd digit indicates a.Type and Shape b.External shape and external shape elements c.External plane surface finishing d.Auxiliary hole and gear teeth

Last Answer : b.External shape and external shape elements

XY Plane Selection in CNC machining is done by….. a.G16 b.G17 c.G18 d.G19

Description : XY Plane Selection in CNC machining is done by….. a.G16 b.G17 c.G18 d.G19

Last Answer : b.G17

The actual thickness of plane strain element is . a.very large b.very small c.assumed by software d.any of the above

Description : The actual thickness of plane strain element is . a.very large b.very small c.assumed by software d.any of the above

Last Answer : a.very large

When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Description : When a thin plate is subjected to loading in its own plane only, the condition is called _ a.plane stress b.plane strain c.zero stress d.zero strain

Last Answer : a.plane stress

A triangular plane stress element has how many degrees of freedom? a.3 b.4 c.5 d.6

Description : A triangular plane stress element has how many degrees of freedom? a.3 b.4 c.5 d.6

Last Answer : d.6

The ___________ is used to create a surface using curves that form closed boundaries a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Description : The ___________ is used to create a surface using curves that form closed boundaries a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Last Answer : c.coons patch

In modeling of a tabulated cylinder, the plane of the curve is _______ a.along the curve b.normal to the curve c.along the axis of the cylinder d.perpendicular to the axis of the cylinder

Description : In modeling of a tabulated cylinder, the plane of the curve is _______ a.along the curve b.normal to the curve c.along the axis of the cylinder d.perpendicular to the axis of the cylinder

Last Answer : d.perpendicular to the axis of the cylinder

The is used to create a surface using curves that form closed boundaries. a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Description : The is used to create a surface using curves that form closed boundaries. a.ruled Surface b.plane Surface c.coons patch d.surface of Revolution

Last Answer : c.coons patch

From the following, which is an axisymmetric surface? a.Plane Surface b.Ruled Surface c.Surface of Revolution d.All of the above

Description : From the following, which is an axisymmetric surface? a.Plane Surface b.Ruled Surface c.Surface of Revolution d.All of the above

Last Answer : c.Surface of Revolution

What kind of reflection is formed in a plane mirror ?

Description : What kind of reflection is formed in a plane mirror ?

Last Answer : Unreal and straight reflections are formed in a flat mirror.

The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : The window opened on the raster graphics screen in which the image will bedisplayed is called a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : d.Interface window

What is the name of the space in which the image is displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Description : What is the name of the space in which the image is displayed? a.World co-ordinate system b.Screen co-ordinate system c.World window d.Interface window

Last Answer : b.Screen co-ordinate system

Find the size, nature and position of image formed by a concave mirror, when an object of size 1 cm is placed at a distance of 15 cm. Given focal leng

Description : Find the size, nature and position of image formed by a concave mirror, when an object of size 1 cm is placed at a distance of 15 cm. Given focal leng

Last Answer : Find the size, nature and position of image formed by a concave mirror, when an object of size 1 cm ... 15 cm. Given focal length of mirror is 10 cm.

Panning is a technique in which users can change the size of the area to beviewed in order to see more detail or less detail. a.TRUE b.FALSE c. d.

Description : Panning is a technique in which users can change the size of the area to beviewed in order to see more detail or less detail. a.TRUE b.FALSE c. d.

Last Answer : b.FALSE

The radius of curvature of a converging mirror is 30 cm. At what distance from the mirror should an object be placed so as to obtain a virtual image? (a) infinity (b) 30 cm (c) Between 16 cm and 30 cm (d) Between 0 cm and 15 cm

Description : The radius of curvature of a converging mirror is 30 cm. At what distance from the mirror should an object be placed so as to obtain a virtual image? (a) infinity (b) 30 cm (c) Between 16 cm and 30 cm (d) Between 0 cm and 15 cm

Last Answer : (d) Between 0 cm and 15 cm

2. The image formed by a concave mirror is observed to be virtual, erect and larger than the object. Where should be the position of the object? -Physics-10

Description : 2. The image formed by a concave mirror is observed to be virtual, erect and larger than the object. Where should be the position of the object? -Physics-10

Last Answer : (d) The position of the object should be between the pole of the mirror and its principal focus.

A virtual image larger than the object can be formed by which mirror?

Description : A virtual image larger than the object can be formed by which mirror?

Last Answer : Concave mirror

In a plane mirror the image is the same size as the object.?

Description : In a plane mirror the image is the same size as the object.?

Last Answer : Answer this question… In a plane mirror, the image is the samesize as the object.

A boy is standing in front of and close to a special mirror. He finds the image of his head bigger than normal, the middle part of his body of the same size, and his legs smaller than normal. The special mirror is made up of three types of mirrors in the following order from top downwards: (a) Convex, Plane, Concave (b) Plane, Convex, Concave (c) Concave, Plane, Convex (d) Convex, Concave, Plan

Description : A boy is standing in front of and close to a special mirror. He finds the image of his head bigger than normal, the middle part of his body of the same size, and his legs smaller than normal. The ... , Plane, Concave (b) Plane, Convex, Concave (c) Concave, Plane, Convex (d) Convex, Concave, Plan

Last Answer : (c) Concave, Plane, Convex

The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Description : The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Last Answer : b.Tool length offset H

The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above

Description : The parabola is defined mathematically as a curve generated by a point that moves suchthat its distance from the focus is always__________the distance to the directrix a.larger than b.smaller than c.equal to d.none of the above

Last Answer : c.equal to

To generate a rotation , we must specify a.Rotation angle θ b.Distances dx and dy c.Rotation distance d.All of the mentioned

Description : To generate a rotation , we must specify a.Rotation angle θ b.Distances dx and dy c.Rotation distance d.All of the mentioned

Last Answer : a.Rotation angle θ

Find the position of an object which when placed in front of a concave mirror of focal length 20 cm, produces a virtual image which is twice the size

Description : Find the position of an object which when placed in front of a concave mirror of focal length 20 cm, produces a virtual image which is twice the size

Last Answer : Find the position of an object which when placed in front of a concave mirror of focal length 20 cm ... image which is twice the size of the object.

Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Description : Which one of the following statements is TRUE? a.Teach pendant is used for lead-through teaching. b.Teach pendant is used for manual teaching. c.Teach pendant is used for off-line teaching of robots. d.Teach pendant is not used in robot teaching.

Last Answer : b.Teach pendant is used for manual teaching.

For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Description : For 1-D bar elements if the structure is having 3 nodes then the stiffness matrix formed ishaving an order of a.2*2 b.3*3 c.4*4 d.6*6

Last Answer : b.3*3

A boy is standing in front of a plane mirror at a distance of 3 m from it. What is the distance between the boy and his image? (1) 3 m (2) 6 m (3) 4.5 m (4) None of these

Description : A boy is standing in front of a plane mirror at a distance of 3 m from it. What is the distance between the boy and his image? (1) 3 m (2) 6 m (3) 4.5 m (4) None of these

Last Answer : (2) 6 m Explanation: The image formed by a plane mirror is always virtual upright, and of the same shape and size as the object it is reflecting. A virtual image is a copy of an object formed at the location from which the light rays appear to come