In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)
by

1 Answer

Answer :

b.(10, 5)
by

Related questions

Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.

Description : Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.

Last Answer : c.Reflection axis

A line AB with end point A (2,3) & B (7,8) is to be rotated about origin by 300 inclockwise direction. Determine the coordinates of end points S of rotated line. a.(3.232, 2.598) b.(5.232, 3.598) c.(3.232, 1.298) d.(3.232, 1.598)

Description : A line AB with end point A (2,3) & B (7,8) is to be rotated about origin by 300 inclockwise direction. Determine the coordinates of end points S of rotated line. a.(3.232, 2.598) b.(5.232, 3.598) c.(3.232, 1.298) d.(3.232, 1.598)

Last Answer : d.(3.232, 1.598)

Which of the following can not be the input of CAD solid model? a.Physical mockup b.2D surface data c.Tooling d.3D CAD data

Description : Which of the following can not be the input of CAD solid model? a.Physical mockup b.2D surface data c.Tooling d.3D CAD data

Last Answer : c.Tooling

In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Description : In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Last Answer : a.(10, 10)

Coordinate of â–¡ABCD is WCS are: lowermost corner A(2,2) & diagonal corner are C(8,6). W.r.t MCS. The coordinates of origin of WCS system are (5,4). If the axes of WCS are at 600 in CCW w.r.t. the axes of MCS. Find new vertices of point A in MCS. a.(4.268, 6.732) b.(5.268, 6.732) c.(4.268, 4.732) d.(6.268, 4.732)

Description : Coordinate of â- ABCD is WCS are: lowermost corner A(2,2) & diagonal corner are C(8,6). W.r.t MCS. The coordinates of origin of WCS system are (5,4). If the axes of WCS are at 600 in CCW w.r.t. the axes of MCS. Find new ... in MCS. a.(4.268, 6.732) b.(5.268, 6.732) c.(4.268, 4.732) d.(6.268, 4.732)

Last Answer : a.(4.268, 6.732)

Axis-Symmetric element is Element a.1D b.2D c.3D d.4D

Description : Axis-Symmetric element is Element a.1D b.2D c.3D d.4D

Last Answer : b.2D

A line AB with end points A (2, 1) & B (7, 6) is to be moved by 3 units in x-direction & 4units in y-direction. Calculate new coordinates of points B. a.(10, 2) b.(2, 10) c.(10, 10) d.(10, 5)

Description : A line AB with end points A (2, 1) & B (7, 6) is to be moved by 3 units in x-direction & 4units in y-direction. Calculate new coordinates of points B. a.(10, 2) b.(2, 10) c.(10, 10) d.(10, 5)

Last Answer : c.(10, 10)

A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Description : A CNC Lathe is usually a machine tool with Z axes is….. a.Line Joining origin and vertical movement b.Line perpendicular to Y axis c.Both A & B d.Line Joining Chuck centre & tail stock centre

Last Answer : d.Line Joining Chuck centre & tail stock centre

In 2D-translation, a point (x, y) can move to the new position (x’, y’) by usingthe equation a.x’=x+dx and y’=y+dx b.x’=x+dx and y’=y+dy c.X’=x+dy and Y’=y+dx d.X’=x-dx and y’=y-dy

Description : In 2D-translation, a point (x, y) can move to the new position (x’, y’) by usingthe equation a.x’=x+dx and y’=y+dx b.x’=x+dx and y’=y+dy c.X’=x+dy and Y’=y+dx d.X’=x-dx and y’=y-dy

Last Answer : b.x’=x+dx and y’=y+dy

Which of the following is NOT true?Image formed by reflection through a plane mirror is a.of same size b.same orientation c.is at same distance from the mirror d.virtual

Description : Which of the following is NOT true?Image formed by reflection through a plane mirror is a.of same size b.same orientation c.is at same distance from the mirror d.virtual

Last Answer : b.same orientation

The objects transformed using the equation P’=S*P should be a.Scaled b.Repositioned c.Both a and b d.Neither a nor b

Description : The objects transformed using the equation P’=S*P should be a.Scaled b.Repositioned c.Both a and b d.Neither a nor b

Last Answer : c.Both a and b

Which one is NOT related to rapid prototyping definition? a.Layer by layer b.Physical model c.From 3D CAD data d.Production line

Description : Which one is NOT related to rapid prototyping definition? a.Layer by layer b.Physical model c.From 3D CAD data d.Production line

Last Answer : d.Production line

For Q 51, find coordinates of point on circle at u=0 a.11.6, 7 b.7, 11 c.11, 7 d.11.5, 7.5

Description : For Q 51, find coordinates of point on circle at u=0 a.11.6, 7 b.7, 11 c.11, 7 d.11.5, 7.5

Last Answer : a.11.6, 7

We can combine the multiplicative and translational terms for 2D into a singlematrix representation by expanding a.2 x 2 matrix into 4x4 matrix b.2 x 2 matrix into 3 x 3 c.3 x 3 matrix into 2 x 2 d.Only c

Description : We can combine the multiplicative and translational terms for 2D into a singlematrix representation by expanding a.2 x 2 matrix into 4x4 matrix b.2 x 2 matrix into 3 x 3 c.3 x 3 matrix into 2 x 2 d.Only c

Last Answer : b.2 x 2 matrix into 3 x 3

The matrix representation for scaling in homogeneous coordinates is a.P’=S*P b.P’=R*P c.P’=dx+dy d.P’=S*S

Description : The matrix representation for scaling in homogeneous coordinates is a.P’=S*P b.P’=R*P c.P’=dx+dy d.P’=S*S

Last Answer : a.P’=S*P

If point are expressed in homogeneous coordinates then the pair of (x, y) isrepresented as a.(x’, y’, z’) b.(x, y, z) c.(x’, y’, w’) d.(x’, y’, w)

Description : If point are expressed in homogeneous coordinates then the pair of (x, y) isrepresented as a.(x’, y’, z’) b.(x, y, z) c.(x’, y’, w’) d.(x’, y’, w)

Last Answer : d.(x’, y’, w)

Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]

Description : Find coordinates of points on line having end points P1(3,5,8) and P2 (6,4,3) at u=0.25 a.[3.75 4.25 6.25] b.[3.25 4.25 6.25] c.[3.75 4.75 6.75] d.[4.25 3.75 6.25]

Last Answer : c.[3.75 4.75 6.75]

____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Description : ____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Last Answer : b.Rapid prototyping

In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Description : In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Last Answer : d.Stereolithography

A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Description : A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Last Answer : d.Virtual Prototype

Which of the following is the process of the pre-processing stage? a.Remove support b.Checking 3D CAD data c.De-powdering loose material d.Dip in a binder to strengthen the part

Description : Which of the following is the process of the pre-processing stage? a.Remove support b.Checking 3D CAD data c.De-powdering loose material d.Dip in a binder to strengthen the part

Last Answer : b.Checking 3D CAD data

Which CAD software cannot be used to create data for the prototyping machine? a.CREO b.CATIA c.NX Unigraphics d.Adobe Illustrator

Description : Which CAD software cannot be used to create data for the prototyping machine? a.CREO b.CATIA c.NX Unigraphics d.Adobe Illustrator

Last Answer : d.Adobe Illustrator

Which of the following is least important in design during rapid prototyping? a.Machine size b.Tolerance c.Material d.CAD software

Description : Which of the following is least important in design during rapid prototyping? a.Machine size b.Tolerance c.Material d.CAD software

Last Answer : b.Tolerance

The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Description : The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Last Answer : c.RP machine

For rapid prototyping 3D CAD model should be converted into______file a.SGC b.SLA c.STL d.SLS

Description : For rapid prototyping 3D CAD model should be converted into______file a.SGC b.SLA c.STL d.SLS

Last Answer : c.STL

Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Description : Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Last Answer : a.3D CAD data - CAD solid model - STL file - RP prototype

Input of RP data is ______ a.CAM data b.CAPP data c.CAD data d.All of the above

Description : Input of RP data is ______ a.CAM data b.CAPP data c.CAD data d.All of the above

Last Answer : c.CAD data

From following, the alternative name for RP is ________ a.Additive Manufacturing b.Layer Manufacturing c.Direct CAD Manufacturing d.All of the above

Description : From following, the alternative name for RP is ________ a.Additive Manufacturing b.Layer Manufacturing c.Direct CAD Manufacturing d.All of the above

Last Answer : d.All of the above

Which two disciplines are tied by a common database? a.documentation and geometric modeling b.CAD and CAM c.drafting and documentation d.none of the mentioned

Description : Which two disciplines are tied by a common database? a.documentation and geometric modeling b.CAD and CAM c.drafting and documentation d.none of the mentioned

Last Answer : b.CAD and CAM

CAD/CAM is the relationship between a.science and engineering b.manufacturing and marketing c.design and manufacturing d.design and marketing

Description : CAD/CAM is the relationship between a.science and engineering b.manufacturing and marketing c.design and manufacturing d.design and marketing

Last Answer : c.design and manufacturing

A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Description : A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Last Answer : b.Computer Aided Design (CAD)

From the following, which one will require 4 matrices to multiply to get the final position? a.Rotation about the origin b.Rotation about an arbitrary Point c.Rotation about an arbitrary line d.Scaling about the origin

Description : From the following, which one will require 4 matrices to multiply to get the final position? a.Rotation about the origin b.Rotation about an arbitrary Point c.Rotation about an arbitrary line d.Scaling about the origin

Last Answer : b.Rotation about an arbitrary Point

B-rep and C-Rep are the methods of a.solid modeling b.surface modeling c.wireframe modeling d.2D modeling

Description : B-rep and C-Rep are the methods of a.solid modeling b.surface modeling c.wireframe modeling d.2D modeling

Last Answer : a.solid modeling

For 2D transformation the value of third coordinate i.e. w (or h) =? a.1 b.0 c.-1 d.Any value

Description : For 2D transformation the value of third coordinate i.e. w (or h) =? a.1 b.0 c.-1 d.Any value

Last Answer : a.1

In , the coordinates are mentioned in the program with respect to onePrevious point. a.Incremental System b.Absolute System c.Datum System d.Screen Coordinates System

Description : In , the coordinates are mentioned in the program with respect to onePrevious point. a.Incremental System b.Absolute System c.Datum System d.Screen Coordinates System

Last Answer : a.Incremental System

In , the coordinates are mentioned in the program with respect to onereference point a.Incremental System b.Absolute System c.Datum System d.Screen Coordinates System

Description : In , the coordinates are mentioned in the program with respect to onereference point a.Incremental System b.Absolute System c.Datum System d.Screen Coordinates System

Last Answer : b.Absolute System

An absolute NC system is one in which all position coordinates are referred to one fixedorigin called the zero point. a.TRUE b.FALSE c. d.

Description : An absolute NC system is one in which all position coordinates are referred to one fixedorigin called the zero point. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

The original coordinates of the point in polar coordinates are a.X’=r cos (Ф +ϴ) and Y’=r cos (Ф +ϴ) b.X’=r cos (Ф +ϴ) and Y’=r sin (Ф +ϴ) c.X’=r cos (Ф -ϴ) and Y’=r cos (Ф -ϴ) d.X’=r cos (Ф +ϴ) and Y’=r sin (Ф -ϴ)

Description : The original coordinates of the point in polar coordinates are a.X’=r cos (Ф +ϴ) and Y’=r cos (Ф +ϴ) b.X’=r cos (Ф +ϴ) and Y’=r sin (Ф +ϴ) c.X’=r cos (Ф -ϴ) and Y’=r cos (Ф -ϴ) d.X’=r cos (Ф +ϴ) and Y’=r sin (Ф -ϴ)

Last Answer : b.X’=r cos (Ф +ϴ) and Y’=r sin (Ф +ϴ)

If two pure reflections about a line passing through the origin are appliedsuccessively the result is a.Pure rotation b.Quarter rotation c.Half rotation d.True reflection

Description : If two pure reflections about a line passing through the origin are appliedsuccessively the result is a.Pure rotation b.Quarter rotation c.Half rotation d.True reflection

Last Answer : a.Pure rotation

Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Description : Which transformation distorts the shape of an object such that the transformed shapeappears as if the object were composed of internal layers that had been caused to slide over each other? a.Rotation b.Scaling up c.Scaling down d.Shearing

Last Answer : d.Shearing

Find parametric equation for X-coordinates of hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.-5u3+8u2+u+1 b.5u3+8u2+u+1 c.8u3-5u2-u+1 d.8u3+5u2+u+1

Description : Find parametric equation for X-coordinates of hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.-5u3+8u2+u+1 b.5u3+8u2+u+1 c.8u3-5u2-u+1 d.8u3+5u2+u+1

Last Answer : a.-5u3+8u2+u+1

Scaling of a polygon is done by computing a.The product of (x, y) of each vertex b.(x, y) of end points c.Center coordinates d.Only a

Description : Scaling of a polygon is done by computing a.The product of (x, y) of each vertex b.(x, y) of end points c.Center coordinates d.Only a

Last Answer : d.Only a

Find parametric equation for Y-coordinates of Hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.2u3-3u2+2u+4 b.3u3-2u2-2u-4 c.2u3-3u2-2u-4 d.2u3+3u2+2u+4

Description : Find parametric equation for Y-coordinates of Hermite cubic spline curve having endpoints P0[4,4]; P1[8,5] a.2u3-3u2+2u+4 b.3u3-2u2-2u-4 c.2u3-3u2-2u-4 d.2u3+3u2+2u+4

Last Answer : a.2u3-3u2+2u+4

The points in the entire structure are defined using the coordinates system is known as a.local coordinates system b.natural coordinates system c.global coordinate system d.none of the above

Description : The points in the entire structure are defined using the coordinates system is known as a.local coordinates system b.natural coordinates system c.global coordinate system d.none of the above

Last Answer : c.global coordinate system

The process of mapping a world window in World Coordinates to the Viewportis called Viewing transformation. a.TRUE b.FALSE c. d.

Description : The process of mapping a world window in World Coordinates to the Viewportis called Viewing transformation. a.TRUE b.FALSE c. d.

Last Answer : a.TRUE

An ellipse can also be rotated about its center coordinates by rotating a.End points b.Major and minor axes c.Only a d.None

Description : An ellipse can also be rotated about its center coordinates by rotating a.End points b.Major and minor axes c.Only a d.None

Last Answer : b.Major and minor axes

To change the position of a circle or ellipse we translate a.Center coordinates b.Center coordinates and redraw the figure in new location c.Outline coordinates d.All of the mentioned

Description : To change the position of a circle or ellipse we translate a.Center coordinates b.Center coordinates and redraw the figure in new location c.Outline coordinates d.All of the mentioned

Last Answer : b.Center coordinates and redraw the figure in new location

In Coordinates, a points in n-dimensional space is represent by(n+1) coordinates. a.Scaling b.Homogeneous c.Inverse transformation d.3D Transformation

Description : In Coordinates, a points in n-dimensional space is represent by(n+1) coordinates. a.Scaling b.Homogeneous c.Inverse transformation d.3D Transformation

Last Answer : b.Homogeneous

In homogeneous coordinates value of ‘h’ is consider as 1 & it is called….. a.Magnitude Vector b.Unit Vector c.Non-Zero Vector d.Non-Zero Scalar Factor

Description : In homogeneous coordinates value of ‘h’ is consider as 1 & it is called….. a.Magnitude Vector b.Unit Vector c.Non-Zero Vector d.Non-Zero Scalar Factor

Last Answer : d.Non-Zero Scalar Factor

What is the use of homogeneous coordinates and matrix representation? a.To treat all 3 transformations in a consistent way b.To scale c.To rotate d.To shear the object

Description : What is the use of homogeneous coordinates and matrix representation? a.To treat all 3 transformations in a consistent way b.To scale c.To rotate d.To shear the object

Last Answer : a.To treat all 3 transformations in a consistent way