Which of the following can not be the input of CAD solid model? a.Physical mockup b.2D surface data c.Tooling d.3D CAD data

Which of the following can not be the input of CAD solid model? a.Physical mockup b.2D surface data c.Tooling d.3D CAD data
by

1 Answer

Answer :

c.Tooling
by

Related questions

Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Description : Choose the correct sequence to generate prototype a.3D CAD data - CAD solid model - STL file - RP prototype b.CAD solid model - 3D CAD data - RP prototype - STL file c.STL file - 3D CAD data - CAD solid model - RP prototype d.3D CAD data - STL file - CAD solid model - RP prototype

Last Answer : a.3D CAD data - CAD solid model - STL file - RP prototype

Which one is NOT related to rapid prototyping definition? a.Layer by layer b.Physical model c.From 3D CAD data d.Production line

Description : Which one is NOT related to rapid prototyping definition? a.Layer by layer b.Physical model c.From 3D CAD data d.Production line

Last Answer : d.Production line

For rapid prototyping 3D CAD model should be converted into______file a.SGC b.SLA c.STL d.SLS

Description : For rapid prototyping 3D CAD model should be converted into______file a.SGC b.SLA c.STL d.SLS

Last Answer : c.STL

____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Description : ____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Last Answer : b.Rapid prototyping

In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Description : In a CAD package, mirror image of a 2D point P (5, 10) is to be obtained about a line whichpasses through the origin and makes an angle of 45° counterclockwise with the X-axis. The coordinates of the transformed point will be a.(7.5, 5) b.(10, 5) c.(7.5, -5) d.(10, -5)

Last Answer : b.(10, 5)

Which of the following is the process of the pre-processing stage? a.Remove support b.Checking 3D CAD data c.De-powdering loose material d.Dip in a binder to strengthen the part

Description : Which of the following is the process of the pre-processing stage? a.Remove support b.Checking 3D CAD data c.De-powdering loose material d.Dip in a binder to strengthen the part

Last Answer : b.Checking 3D CAD data

A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Description : A computer model of a part design on a CAD system is called which of the following? a.Computer Prototype b.Geometric Prototype c.Solid Prototype d.Virtual Prototype

Last Answer : d.Virtual Prototype

Axis-Symmetric element is Element a.1D b.2D c.3D d.4D

Description : Axis-Symmetric element is Element a.1D b.2D c.3D d.4D

Last Answer : b.2D

B-rep and C-Rep are the methods of a.solid modeling b.surface modeling c.wireframe modeling d.2D modeling

Description : B-rep and C-Rep are the methods of a.solid modeling b.surface modeling c.wireframe modeling d.2D modeling

Last Answer : a.solid modeling

Input of RP data is ______ a.CAM data b.CAPP data c.CAD data d.All of the above

Description : Input of RP data is ______ a.CAM data b.CAPP data c.CAD data d.All of the above

Last Answer : c.CAD data

Which one of the following is not a direct rapid tooling method? a.LOM Composite b.Direct AIM (ACES Injection Molding) c.Sand Molding d.Injection molding

Description : Which one of the following is not a direct rapid tooling method? a.LOM Composite b.Direct AIM (ACES Injection Molding) c.Sand Molding d.Injection molding

Last Answer : d.Injection molding

Which one of the following is not a rapid indirect tooling method? a.Vacuum Casting b.Investment Casting c.Laser-Engineered Net Shaping d.Injection molding

Description : Which one of the following is not a rapid indirect tooling method? a.Vacuum Casting b.Investment Casting c.Laser-Engineered Net Shaping d.Injection molding

Last Answer : c.Laser-Engineered Net Shaping

In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Description : In the context of rapid prototyping and additive manufacturing, tessellation refers to theprocess of slicing the CAD model of the part into layers. a.Droplet Deposition Manufacturing b.Used-Deposition Modeling c.Laminated-Object Manufacturing d.Stereolithography

Last Answer : d.Stereolithography

Which CAD software cannot be used to create data for the prototyping machine? a.CREO b.CATIA c.NX Unigraphics d.Adobe Illustrator

Description : Which CAD software cannot be used to create data for the prototyping machine? a.CREO b.CATIA c.NX Unigraphics d.Adobe Illustrator

Last Answer : d.Adobe Illustrator

For 3D modeling of automobile body styling, which of the following is a preferredtechnique a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Description : For 3D modeling of automobile body styling, which of the following is a preferredtechnique a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Last Answer : c.Boundary Representation

For 3D modeling of automobile body styling, which of the following is a preferredtechnique? a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Description : For 3D modeling of automobile body styling, which of the following is a preferredtechnique? a.Constructive Solid Geometry b.Pure Primitive Instancing c.Boundary Representation d.Spatial Occupancy Enumeration

Last Answer : c.Boundary Representation

Which kind of model can store information about geometry a.Solid model b.Surface model c.Wireframe model d.none of the above

Description : Which kind of model can store information about geometry a.Solid model b.Surface model c.Wireframe model d.none of the above

Last Answer : a.Solid model

Which of the following is least important in design during rapid prototyping? a.Machine size b.Tolerance c.Material d.CAD software

Description : Which of the following is least important in design during rapid prototyping? a.Machine size b.Tolerance c.Material d.CAD software

Last Answer : b.Tolerance

The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Description : The STL files translate the part geometry from a CAD system to________ a.CNC machine b.VMC machine c.RP machine d.CAPP machine

Last Answer : c.RP machine

From following, the alternative name for RP is ________ a.Additive Manufacturing b.Layer Manufacturing c.Direct CAD Manufacturing d.All of the above

Description : From following, the alternative name for RP is ________ a.Additive Manufacturing b.Layer Manufacturing c.Direct CAD Manufacturing d.All of the above

Last Answer : d.All of the above

Which two disciplines are tied by a common database? a.documentation and geometric modeling b.CAD and CAM c.drafting and documentation d.none of the mentioned

Description : Which two disciplines are tied by a common database? a.documentation and geometric modeling b.CAD and CAM c.drafting and documentation d.none of the mentioned

Last Answer : b.CAD and CAM

CAD/CAM is the relationship between a.science and engineering b.manufacturing and marketing c.design and manufacturing d.design and marketing

Description : CAD/CAM is the relationship between a.science and engineering b.manufacturing and marketing c.design and manufacturing d.design and marketing

Last Answer : c.design and manufacturing

In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Description : In a 2-D CAD package, clockwise circular arc of radius, 5, specified from P1 (15,10)to P2 (10,15)will have its center at a.(10, 10) b.(15, 10) c.(15, 15) d.(10, 15)

Last Answer : a.(10, 10)

A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Description : A system that automates the drafting process with interactive computer graphics iscalled a.Computer Aided Engineering (CAE) b.Computer Aided Design (CAD) c.Computer Aided Manufacturing (CAM) d.Computer Aided Instruction (CAI)

Last Answer : b.Computer Aided Design (CAD)

Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.

Description : Which of this is compulsory for 2D reflection? a.Reflection plane. b.Origin c.Reflection axis d.Co-ordinate axis.

Last Answer : c.Reflection axis

In 2D-translation, a point (x, y) can move to the new position (x’, y’) by usingthe equation a.x’=x+dx and y’=y+dx b.x’=x+dx and y’=y+dy c.X’=x+dy and Y’=y+dx d.X’=x-dx and y’=y-dy

Description : In 2D-translation, a point (x, y) can move to the new position (x’, y’) by usingthe equation a.x’=x+dx and y’=y+dx b.x’=x+dx and y’=y+dy c.X’=x+dy and Y’=y+dx d.X’=x-dx and y’=y-dy

Last Answer : b.x’=x+dx and y’=y+dy

We can combine the multiplicative and translational terms for 2D into a singlematrix representation by expanding a.2 x 2 matrix into 4x4 matrix b.2 x 2 matrix into 3 x 3 c.3 x 3 matrix into 2 x 2 d.Only c

Description : We can combine the multiplicative and translational terms for 2D into a singlematrix representation by expanding a.2 x 2 matrix into 4x4 matrix b.2 x 2 matrix into 3 x 3 c.3 x 3 matrix into 2 x 2 d.Only c

Last Answer : b.2 x 2 matrix into 3 x 3

For 2D transformation the value of third coordinate i.e. w (or h) =? a.1 b.0 c.-1 d.Any value

Description : For 2D transformation the value of third coordinate i.e. w (or h) =? a.1 b.0 c.-1 d.Any value

Last Answer : a.1

Which of the following is the last step of the rapid prototyping process? a.3D Modeling b.Data Conversion c.Building d.Postprocessing

Description : Which of the following is the last step of the rapid prototyping process? a.3D Modeling b.Data Conversion c.Building d.Postprocessing

Last Answer : d.Postprocessing

Which of the following is the firststep of the rapid prototyping process? a.3D Modeling b.Data Conversion c.Building d.Postprocessing

Description : Which of the following is the firststep of the rapid prototyping process? a.3D Modeling b.Data Conversion c.Building d.Postprocessing

Last Answer : a.3D Modeling

From the following, in which process, the input material is in solid form? a.SLA b.SLS c.FDM d.MJM

Description : From the following, in which process, the input material is in solid form? a.SLA b.SLS c.FDM d.MJM

Last Answer : c.FDM

Structuring and combining the primitives of the solid model in the graphics database,is achieved by the use of….. a.FEA b.transformations c.boolean operations d.none of the above

Description : Structuring and combining the primitives of the solid model in the graphics database,is achieved by the use of….. a.FEA b.transformations c.boolean operations d.none of the above

Last Answer : c.boolean operations

Which one of the following is not Extrusion-Based RP Systems? a.Fused Deposition Modelling (FDM) b.3D Printing c.Sheet Lamination (Laminated Object Manufacturing (LOM)) d.Electron Beam melting (EBM)

Description : Which one of the following is not Extrusion-Based RP Systems? a.Fused Deposition Modelling (FDM) b.3D Printing c.Sheet Lamination (Laminated Object Manufacturing (LOM)) d.Electron Beam melting (EBM)

Last Answer : d.Electron Beam melting (EBM)

Which of the following RP system is not developed by 3D systems? a.Selective Laser Sintering (SLS) b.Multi-Jet Modeling System (MJM) c.Paper Lamination Technology (PLT) d.Stereolithography Apparatus (SLA)

Description : Which of the following RP system is not developed by 3D systems? a.Selective Laser Sintering (SLS) b.Multi-Jet Modeling System (MJM) c.Paper Lamination Technology (PLT) d.Stereolithography Apparatus (SLA)

Last Answer : c.Paper Lamination Technology (PLT)

________ command gives an array of object in 3D modeling a.Extrude b.Revolve c.Pattern d.All of the above

Description : ________ command gives an array of object in 3D modeling a.Extrude b.Revolve c.Pattern d.All of the above

Last Answer : c.Pattern

In Coordinates, a points in n-dimensional space is represent by(n+1) coordinates. a.Scaling b.Homogeneous c.Inverse transformation d.3D Transformation

Description : In Coordinates, a points in n-dimensional space is represent by(n+1) coordinates. a.Scaling b.Homogeneous c.Inverse transformation d.3D Transformation

Last Answer : b.Homogeneous

Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Description : Which co-ordinates allow common vector operations such as translation, rotation,scaling and perspective projection to be represented as a matrix by which the vector is multiplied? a.vector co-ordinates b.3D co-ordinates c.affine co-ordinates d.homogenous co-ordinates

Last Answer : d.homogenous co-ordinates

In the following geometric modelling techniques. which cannot be used for finiteelement analysis: a.Wireframe modelling b.Surface modelling c.Solid modeling d.none of the above

Description : In the following geometric modelling techniques. which cannot be used for finiteelement analysis: a.Wireframe modelling b.Surface modelling c.Solid modeling d.none of the above

Last Answer : d.none of the above

In the following three-dimensional modelling techniques. Which do not requiremuch computer time and memory? a.Surface modelling b.Solid modelling c.Wireframe modelling d.All of the above

Description : In the following three-dimensional modelling techniques. Which do not requiremuch computer time and memory? a.Surface modelling b.Solid modelling c.Wireframe modelling d.All of the above

Last Answer : c.Wireframe modelling

In the following geometric modelling techniques which are not three-dimensionalmodelling? a.Wireframe modelling b.Drafting c.Surface modelling d.solid modelling

Description : In the following geometric modelling techniques which are not three-dimensionalmodelling? a.Wireframe modelling b.Drafting c.Surface modelling d.solid modelling

Last Answer : b.Drafting

With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Description : With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Last Answer : c.Digitizers may be used as interactive input devices

Sensors which are come in contact with some surface to measured desired physical variable areknown as____ a.Non-contact sensors b.Proximity sensors c.Contact sensors d.None of the above

Description : Sensors which are come in contact with some surface to measured desired physical variable areknown as____ a.Non-contact sensors b.Proximity sensors c.Contact sensors d.None of the above

Last Answer : c.Contact sensors

Among the following, which one is the earliest step in Data Processing for RapidPrototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Description : Among the following, which one is the earliest step in Data Processing for RapidPrototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Last Answer : b.Part orientation

Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Description : Among the following, which one is the last step in Data Processing for Rapid Prototyping? a.Model slicing b.Part orientation c.Tool path generation d.Support generation

Last Answer : c.Tool path generation

STL files contains ______ a.mass properties of the model b.geometrical data c.drawing data d.all of the above

Description : STL files contains ______ a.mass properties of the model b.geometrical data c.drawing data d.all of the above

Last Answer : b.geometrical data

What's the best way to create a 2D map out of a 3D model?

Description : What's the best way to create a 2D map out of a 3D model?

Last Answer : answer:Not sure what kind of code you’re dealing with, but I expect Matlab (not free) could do this… their graphics are kind of crappy, though. R (free) has better graphics, but is more persnickety to work with where graphics are concerned. Can you tell us more about the 3D model?

Making a 2D drawing into a 3D model?

Description : Making a 2D drawing into a 3D model?

Last Answer : You may enjoy Teddy or Blender

Which of the process, the input material is in powder form? a.LOM b.SLS c.FDM d.MJM

Description : Which of the process, the input material is in powder form? a.LOM b.SLS c.FDM d.MJM

Last Answer : b.SLS

Which of the process, the input material is in liquid form? a.LOM b.SLS c.FDM d.MJM

Description : Which of the process, the input material is in liquid form? a.LOM b.SLS c.FDM d.MJM

Last Answer : d.MJM

Of all of the current material addition rapid prototyping technologies, which one is the mostwidely used? a.Ballistic particle manufacturing b.Selective laser sintering c.Solid ground curing d.Stereolithography

Description : Of all of the current material addition rapid prototyping technologies, which one is the mostwidely used? a.Ballistic particle manufacturing b.Selective laser sintering c.Solid ground curing d.Stereolithography

Last Answer : d.Stereolithography