Transmission lines connect: -

 Transmission lines connect: - 

a) Generating station to a switching station / step down transformer station b) Step down transformer station to service transformer banks c) Distribution transformer to consumer premises d) Service points to consumer premises
by

1 Answer

Answer :

 Transmission lines connect: - Generating station to a switching station / step down transformer station 

by

Related questions

What happens insulators when high voltage passes through transmission lines whether it breaks or lose it's insulating property?

Description : What happens insulators when high voltage passes through transmission lines whether it breaks or lose it's insulating property?

Last Answer : I think it will breaks when it crosses breakdown voltage .

Why are overhead transmission lines not insulated?

Description : Why are overhead transmission lines not insulated?

Last Answer : Insulators are useful to help separate electrical conductors when they come into physical contact. Overhead Transmission Lines Are Not Insulated: The overhead transmission line is carrying extreme high voltage and ... a whole lot of thick insulation to absorb the heat produced by such high voltage.

What type of earthing is used by transmission lines?

Description : What type of earthing is used by transmission lines?

Last Answer : Preventive  multiple  earthing  PME.

The main limitation for power handling capability of short length transmission lines and cables is

Description : The main limitation for power handling capability of short length transmission lines and cables is (A) power factor (B) stability (C) thermal effect limit (D) conductor size

Last Answer : The main limitation for power handling capability of short length transmission lines and cables is thermal effect limit

Bundled conductors are mainly used in high voltage overhead transmission lines to

Description : Bundled conductors are mainly used in high voltage overhead transmission lines to (a) Reduce line loss (c) Reduce corona (b) Reduce harmonics (d) Increase strength

Last Answer : Bundled conductors are mainly used in high voltage overhead transmission lines to Reduce corona 

Bulk power transmission over long HVDC lines is preferred because of

Description : Bulk power transmission over long HVDC lines is preferred because of

Last Answer : Bulk power transmission over long HVDC lines is preferred because of Low cost of HVDC terminal

Transmission lines are transposed to :

Description : Transmission lines are transposed to : (A) Reduce copper loss (B) Reduce skin effect (C) Prevent interference with neighbouring telephone lines (D) Prevent short-circuit between any two lines

Last Answer : a

Hollow conductors are used in the transmission lines to:

Description : Hollow conductors are used in the transmission lines to:  (1) Improve heat dissipation (2) Reduce corona loss (3) Reduce skin effect (4) Reduce the line inductance

Last Answer : Hollow conductors are used in the transmission lines to: Reduce corona loss.

Copper conductors are generally used for transmission lines because it _________.

Last Answer : Copper conductors are generally used for transmission lines because it has longer life and high conductivity.

The transmission lines which feed different sub-stations represent __________.

Last Answer : The transmission lines which feed different sub-stations represent primary distribution.

How transmission lines are classified?

Last Answer : On the basis of distance from generating station to distributers

Why do transmission lines use high voltage?

Last Answer : Transmission lines use high voltage to reduce the amount of power loss over long distance. This power loss can come from large current running through the cable due to the resistance of the cable conductor. Stepping up the voltage reduces the amount of current through transmission lines.

Why do Transmission and Mail not connect anymore when i use pdanet/iphonemodem?

Description : Why do Transmission and Mail not connect anymore when i use pdanet/iphonemodem?

Last Answer : The iPhone data plan will only allow traffic over port 80, so things like torrent downloads and email won’t work when you’re using your computer over the iPhone data plan. There’s probably free software to allow tunneling over port 80, but I’m not sure off the top of my head.

Which of the following uses cables to connect two or more computers? (a) Transmission (b) Unguided -Technology

Description : Which of the following uses cables to connect two or more computers? (a) Transmission (b) Unguided -Technology

Last Answer : (c) In guided media, signals are guided through cables.

In transmission line, which of the following is the first step in the procedure of using stub matching? A. Calculate stub susceptance. B. Calculate load admittance C. Connect stub to load D. Transform conductance to resistance

Description : In transmission line, which of the following is the first step in the procedure of using stub matching? A. Calculate stub susceptance. B. Calculate load admittance C. Connect stub to load D. Transform conductance to resistance

Last Answer : B. Calculate load admittance

Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False

Description : Cotter joint is going to be use to connect the two rods for torque transmission purpose. a) True b) False

Last Answer : b) False

Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False

Description : Cotter joint can be used to connect two rods for torque transmission purpose. true /false. a) True b) False

Last Answer : b) False

Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False

Description : Cotter joint can be used to connect two rods for torque transmission purpose. a) True b) False

Last Answer : b) False

What type of transmission line is often used to connect a television set to its antenna?

Description : What type of transmission line is often used to connect a television set to its antenna?

Last Answer : Twin lead.

Short-circuited stubs are preferred to open-circuited stubs because thelatter are a. more difficult to make an connect b. made of a transmission line with a different characteristic impedance c. liable to radiate

Description : Short-circuited stubs are preferred to open-circuited stubs because thelatter are a. more difficult to make an connect b. made of a transmission line with a different characteristic impedance c. liable to radiate

Last Answer : c. liable to radiate

What's the least number of straight lines do you need to connect a random set of dots?

Description : What's the least number of straight lines do you need to connect a random set of dots?

Last Answer : For your first question it seems logical that it depends of the number of points (dots) as well as the location of the points. As for how you get your answer, I doubt that there is an easy handy dandy formula to use. Why not just use your brain power?

ECE Board Exam March 1996 Modems are required to connect computer to telephone lines because ___________. A. telephone company rules required them B. the telephone network bandwidth is too high C. none of the above D. the telephone network will pass direct current

Description : ECE Board Exam March 1996 Modems are required to connect computer to telephone lines because ___________. A. telephone company rules required them B. the telephone network bandwidth is too high C. none of the above D. the telephone network will pass direct current

Last Answer : D. the telephone network will pass direct current

On a topographic map, lines that connect points of the same elevation are termed: w) benchmarks x) bathymetric lines y) contour lines z) isobars

Description : On a topographic map, lines that connect points of the same elevation are termed: w) benchmarks x) bathymetric lines y) contour lines z) isobars

Last Answer : ANSWER: Y -- CONTOUR LINES

Consider a window bounded by the lines : x = 0; y= 0; x = 5 and y = 3. The line segment joining (–1, 0) and (4, 5), if clipped against this window will connect the points (A) (0, 1) and (2, 3) (B) (0, 1) and (3, 3) (C) (0, 1) and (4, 3) (D) (0, 1) and (3, 2)

Description : Consider a window bounded by the lines : x = 0; y= 0; x = 5 and y = 3. The line segment joining (–1, 0) and (4, 5), if clipped against this window will connect the points (A) (0, 1) and (2, 3) (B) (0, 1) and (3, 3) (C) (0, 1) and (4, 3) (D) (0, 1) and (3, 2)

Last Answer : (A) (0, 1) and (2, 3)

What are the building restrictions concerning power/transmission lines?

Description : What are the building restrictions concerning power/transmission lines?

Last Answer : There is none in North Carolina—- They just put in a transmission line right down the road with houses at 75 foot set-back from road on both sides of the road. The towers are taller than the driveways are long!

Which of the following is not a transmission medium? (a) Telephone lines (b) Co_axial cable (c) Modem (d) Microwave system -Technology

Description : Which of the following is not a transmission medium? (a) Telephone lines (b) Co_axial cable (c) Modem (d) Microwave system -Technology

Last Answer : (c) All are communication channel but modem is a dev that convert analog signals to digital signals or vice-versa

How much labor time to replace transmission cooler lines on Detroit series 60?

Description : How much labor time to replace transmission cooler lines on Detroit series 60?

Last Answer : Need answer

The leakage current in the transmission lines is referred to as the a) Resistance b) Radiation c) Conductance d) Polarisation

Description : The leakage current in the transmission lines is referred to as the a) Resistance b) Radiation c) Conductance d) Polarisation

Last Answer : Ans: C

What are the different relays that employed for protection of apparatus and transmission lines?

Description : What are the different relays that employed for protection of apparatus and transmission lines?

Last Answer : Answer: The relays that are usually employed for protection of transmission lines include • Over current relay • Directional relay • Distance relay • Under Voltage relay • Under-frequency relay • Thermal relay • Differential relay • Phase sequence relays • pilot relays

Why Earth Wire is provided in the overhead transmission lines?

Description : Why Earth Wire is provided in the overhead transmission lines?

Last Answer : Earth wire is provided above the overhead transmission lines for protection against lightning strokes. The ground wire or earth wire protects the phase conductors or line conductors by attracting itself the ... traveling waves set in the lines by acting a short circuit secondary of the line current

Why, when birds sit on transmission lines or current wires doesn't get shock?

Description : Why, when birds sit on transmission lines or current wires doesn't get shock?

Last Answer : It's true that if birds touch the single one line (phase or neutral) they don't get electrical shock... if birds touch 2 lines than the circuit is closed and they get electrical shock. so ... is grounded..So that means that human who touch the line closes the circuit between phase and neutral.

Man-made noise is usually from _______. A. transmission over power lines and by ground wave B. sky-wave C. space-wave D. troposphere

Description : Man-made noise is usually from _______. A. transmission over power lines and by ground wave B. sky-wave C. space-wave D. troposphere

Last Answer : A. transmission over power lines and by ground wave

The velocity factor in transmission lines vary from ___ to ___. A. 0.6 to 0.8 B. 0.3 to 0.5 C.0.5 to 0.9 D. 0.8 to 0.9

Description : The velocity factor in transmission lines vary from ___ to ___. A. 0.6 to 0.8 B. 0.3 to 0.5 C.0.5 to 0.9 D. 0.8 to 0.9

Last Answer : C.0.5 to 0.9

Why, when birds sit on transmission lines or current wires doesn't get shock?

Description : Why, when birds sit on transmission lines or current wires doesn't get shock?

Last Answer : A:Its true that if birds touch the single one line (phase or neutral) they don't get electrical shock... if birds touch 2 lines than the circuit is closed and they get electrical shock.. so if a human ... the air. If he is standing on the ground then touching the line (phase) he will get a shock.

Transmission of printed material over telephone lines. A. Video text B. Facsimile C. Encoding D. Xerox copy

Description : Transmission of printed material over telephone lines. A. Video text B. Facsimile C. Encoding D. Xerox copy

Last Answer : B. Facsimile

Transmission lines when connected to antenna have A. capacitive load B. resistive load whose resistance is less than characteristics impedance C. resistive load at the resonant frequency D. resistive load whose resistance is greater than the characteristic impedance of the line

Description : Transmission lines when connected to antenna have A. capacitive load B. resistive load whose resistance is less than characteristics impedance C. resistive load at the resonant frequency D. resistive load whose resistance is greater than the characteristic impedance of the line

Last Answer : C. resistive load at the resonant frequency

Transmission lines are either balanced or unbalanced with respect to _________. A. negative terminal B. input C. ground D. positive terminal

Description : Transmission lines are either balanced or unbalanced with respect to _________. A. negative terminal B. input C. ground D. positive terminal

Last Answer : C. ground

What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna compared to the output power of the transmitter C. The ratio of the signal in the backward direction D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Description : What is meant by antenna gain? A. The final amplifier gain minus the transmission line losses (including any phasing lines present) B. The ratio of the amount of power produced by the antenna ... D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

Last Answer : D. The numeric ratio relating the radiated signal strength of an antenna to that of another antenna

ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits of data per character and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Description : ECE Board Exam March 1996 What is the transmission rate of a system for transmitting the output of a microcomputer to a line printer operating at a speed of 30 lines/minute? Assume that the line printer has 8 bits ... and prints out 80 characters/line. A. 800 bps B. 400 bps C. 320 bps D. 640 bps

Last Answer : C. 320 bps

Which of the following transmission systems provide the highest data rate to in individual device? a. computer bus b. telephone lines c. voice and mode d. lease lines

Description : Which of the following transmission systems provide the highest data rate to in individual device? a. computer bus b. telephone lines c. voice and mode d. lease lines

Last Answer : computer bus

Which of the following is not a transmission medium? a. telephone lines b. coaxial cables c. modem d. microwave systems

Description : Which of the following is not a transmission medium? a. telephone lines b. coaxial cables c. modem d. microwave systems

Last Answer : microwave systems

The interactive transmission of data within a time sharing system may be best suited to a. simplex lines b. half-duplex lines c. full duplex lines d. biflex-lines

Description : The interactive transmission of data within a time sharing system may be best suited to a. simplex lines b. half-duplex lines c. full duplex lines d. biflex-lines

Last Answer : half-duplex lines

The velocity of a wave travelling in the air medium without transmission lines or waveguides(wireless) is a) 6 x 10 8 b) 3 x 10 8 c) 1.5 x 10 8 d) 9 x 10 8

Description : The velocity of a wave travelling in the air medium without transmission lines or waveguides(wireless) is a) 6 x 10 8 b) 3 x 10 8 c) 1.5 x 10 8 d) 9 x 10 8

Last Answer : b) 3 x 10 8

Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog conversion at the start of a long distance transmission? A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Last Answer : Modem

In most Wide Area Networks, the subnet consists of two distinct components: which are they? A. Transmission Lines and Switching Elements. B. host and subnet C. Transmission Lines and host D. subnet and Switching Elements.

Description : In most Wide Area Networks, the subnet consists of two distinct components: which are they? A. Transmission Lines and Switching Elements. B. host and subnet C. Transmission Lines and host D. subnet and Switching Elements.

Last Answer : A. Transmission Lines and Switching Elements.

Transmission Lines are also called as…………………. A. circuits B. channels C. trunks D. circuits channels, or trunks

Description : Transmission Lines are also called as…………………. A. circuits B. channels C. trunks D. circuits channels, or trunks

Last Answer : D. circuits channels, or trunks

Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Description : Which transmission mode is used for data communication along telephone lines? (A) Parallel (B) Serial (C) Synchronous (D) Asynchronous

Last Answer : (B) Serial

The regulation of Short Transmission lines depends up on a) Distance of line b) Frequency c) Power factor d) All

Description : The regulation of Short Transmission lines depends up on a) Distance of line b) Frequency c) Power factor d) All

Last Answer : Ans: Power factor

The interaction between a transmission line and communication line is minimized by (a) transposing transmission as well as communication lines (b) increasing the height of the transmission line tower (c) increasing the distance between the two lines (d) all of the above

Description : The interaction between a transmission line and communication line is minimized by (a) transposing transmission as well as communication lines (b) increasing the height of the transmission line tower (c) increasing the distance between the two lines (d) all of the above

Last Answer : (d) all of the above

Shunt capacitance is neglected while considering (a) short transmission line (b) medium transmission line (c) long transmission line (d) medium and long transmission lines

Description : Shunt capacitance is neglected while considering (a) short transmission line (b) medium transmission line (c) long transmission line (d) medium and long transmission lines

Last Answer : (a) short transmission line