In setting up a plane table at any station (a) Leveling is done first (b) Centering is done first (c) Both leveling and centering are done simultaneously * (d) Orientation is done first

In setting up a plane table at any station
(a) Leveling is done first
(b) Centering is done first
(c) Both leveling and centering are done simultaneously *
(d) Orientation is done first
by

1 Answer

Answer :

c) Both leveling and centering are done simultaneously *
by

Related questions

In setting up a plane table at any station (A) Levelling is done first (B) Centering is done first (C) Both levelling and centering are done simultaneously (D) Orientation is done first

Description : In setting up a plane table at any station (A) Levelling is done first (B) Centering is done first (C) Both levelling and centering are done simultaneously (D) Orientation is done first

Last Answer : (C) Both levelling and centering are done simultaneously

The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Description : The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Last Answer : (C) Orientation

After fixing the plane table to the tripod, the main operations which are needed at each plane table station are (i) Levelling (ii) Orientation (iii) Centering The correct sequence of these operations is (A) (i), (ii), (iii) (B) (i), (iii), (ii) (C) (iii), (i), (ii) (D) (ii), (iii), (i)

Description : After fixing the plane table to the tripod, the main operations which are needed at each plane table station are (i) Levelling (ii) Orientation (iii) Centering The correct sequence of these operations is (A) (i), (ii), (iii) (B) (i), (iii), (ii) (C) (iii), (i), (ii) (D) (ii), (iii), (i)

Last Answer : (B) (i), (iii), (ii)

While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of the ray in plan from the true position will be (A) 0.02 cm (B) 0.15 cm (C) 0.2 cm (D) 0.1 cm

Description : While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of ... true position will be (A) 0.02 cm (B) 0.15 cm (C) 0.2 cm (D) 0.1 cm

Last Answer : (B) 0.15 cm

Dumpy level is most suitable when (a) The instrument is to be shifted frequently (b) Fly leveling is being done over long distance (c) Many readings are to be taken from a single setting of the instrument* (d) All of the above

Description : Dumpy level is most suitable when (a) The instrument is to be shifted frequently (b) Fly leveling is being done over long distance (c) Many readings are to be taken from a single setting of the instrument* (d) All of the above

Last Answer : (c) Many readings are to be taken from a single setting of the instrument*

When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Description : When setting up teeth for complete dentures having bilateral balanced occlusion, separation of posterior teeth during protrusion is done by: A. Increasing the anterior posterior occlusal curve B. Decreasing the angle orientation of the occlusal plane

Last Answer : B. Decreasing the angle orientation of the occlusal plane

The instrument used for accurate centering in plane table survey is (A) Spirit level (B) Alidade (C) Plumbing fork (D) Trough compass

Description : The instrument used for accurate centering in plane table survey is (A) Spirit level (B) Alidade (C) Plumbing fork (D) Trough compass

Last Answer : (C) Plumbing fork

Conventional method of camber recording a) Piano wire with counter weight* b) By using leveling instrument c) Offset method d) None of the above

Description : Conventional method of camber recording a) Piano wire with counter weight* b) By using leveling instrument c) Offset method d) None of the above

Last Answer : a) Piano wire with counter weight*

The method of plane tabling commonly used for establishing the instrument station is a method of (a) Radiation (b) Intersection* (c) Resection (d) Traversing

Description : The method of plane tabling commonly used for establishing the instrument station is a method of (a) Radiation (b) Intersection* (c) Resection (d) Traversing

Last Answer : (b) Intersection*

Which of the instruments is not used in Preliminary survey. (a) Theodelite (b) Tacheometer (c) Dumpy level (d) Plane table (e) None of them*

Description : Which of the instruments is not used in Preliminary survey. (a) Theodelite (b) Tacheometer (c) Dumpy level (d) Plane table (e) None of them*

Last Answer : (e) None of them*

The size of a plane table is (a) 750mm x 900 mm (b) 600mm x 750 mm* (c) 450mm x 600 mm

Description : The size of a plane table is (a) 750mm x 900 mm (b) 600mm x 750 mm* (c) 450mm x 600 mm

Last Answer : (b) 600mm x 750 mm*

For locating an inaccessible point with the help of only a plane table, one should use (a) traversing (b) resection (c) radiation (e) Intersection*

Description : For locating an inaccessible point with the help of only a plane table, one should use (a) traversing (b) resection (c) radiation (e) Intersection*

Last Answer : (e) Intersection*

Orientation of a plane table by solving two point problems is only adopted when (A) Saving of time is a main factor (B) Better accuracy is a main factor (C) Given points are inaccessible (D) None of these

Description : Orientation of a plane table by solving two point problems is only adopted when (A) Saving of time is a main factor (B) Better accuracy is a main factor (C) Given points are inaccessible (D) None of these

Last Answer : (C) Given points are inaccessible

To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab in line with AB. A ray is then drawn towards and at the table is oriented by back ray method. The orientation so obtained, is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Description : To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab ... , is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Last Answer : (C) Manifold and correct

The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error such that each ray is equally rotated either clockwise or anti clockwise 5. The points obtained by three rays are the correct location. The correct sequence is (A) 1, 3, 2, 4, 5 (B) 1, 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Description : The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error ... 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Last Answer : (A) 1, 3, 2, 4, 5

Describe any one method of orientation of plane table surveying

Description : Describe any one method of orientation of plane table surveying

Last Answer : Orientation by back sighting method: This method is accurate and is always preferred. Procedure: 1.Suppose A and B are two stations.The plane table is set up over A. The table is leveled by spirit level ... are perfect and needle is exactly at 0-0 , the orientation is said to be perfect.

Describe back sighting method of orientation of plane table surveying.

Description : Describe back sighting method of orientation of plane table surveying.

Last Answer : Backsight method of orientation 1. Assume we have to orient the table at next station B' represented on paper by point b'. 2.the line ba' is drawn on previous station A'. 3.the alidade is kept ... A'. 4. When the plotted line ab' coincides with line AB' and table will be oriented.

Explain Orientation of plane table by Back-sighting Method.

Description : Explain Orientation of plane table by Back-sighting Method.

Last Answer : Ans:- The method of setting up the plane table at each of the successive stations parallel to the position it occupied at the starting station is known as an Orientation. Orientation must be done when ... and bisection of the ranging rod at a are perfect then orientation is said to perfect.  

What is orientation of plane table? State the procedure of any one method of orientation.

Description : What is orientation of plane table? State the procedure of any one method of orientation.

Last Answer : Orientation of plane table: It means placing table in parallel positions at all stations (or at successive station) 1. Orientation using trough compass: Here north direction is marked at first station ... rotated till ranging rod at previous station is exactly bisected. The table is then clamped. 

“B” class station is provided only on (a) Single lines (b) Double line (c) On both single as well as double line* (d) None of them

Description : “B” class station is provided only on (a) Single lines (b) Double line (c) On both single as well as double line* (d) None of them

Last Answer : c) On both single as well as double line*

Land plane is ideally suited for: a. Land leveling b. Earth moving c. Final grading d. Top finishing

Description : Land plane is ideally suited for: a. Land leveling b. Earth moving c. Final grading d. Top finishing

Last Answer : d. Top finishing

By 00 probe in AT weld testing with normal gain setting. (i) Area below N.axis can be tested. (ii) Area below N.axis can not be tested.* (iii) Only web below N.axis can be tested. (iv) All above are correct.

Description : By 00 probe in AT weld testing with normal gain setting. (i) Area below N.axis can be tested. (ii) Area below N.axis can not be tested.* (iii) Only web below N.axis can be tested. (iv) All above are correct.

Last Answer : (ii) Area below N.axis can not be tested.*

A slow setting cement will have higher percentage of a) tricalcium aluminate b) tricalcium silicate c) Gypsum d) Dicalcium silicate*

Description : A slow setting cement will have higher percentage of a) tricalcium aluminate b) tricalcium silicate c) Gypsum d) Dicalcium silicate*

Last Answer : C2s

The setting and hardening of cement after addition of water is due to a) Binding action of water b) Evaporation of water c) Hydration and hydrolysis of some constituent compounds of cement* d) Additional hardening compounds added to cement

Description : The setting and hardening of cement after addition of water is due to a) Binding action of water b) Evaporation of water c) Hydration and hydrolysis of some constituent compounds of cement* d) Additional hardening compounds added to cement

Last Answer : c) Hydration and hydrolysis of some constituent compounds of cement*

Sand is mixed with lime to a) Reduced cost b) Reduced setting time c) Prevent shrinkage and cracking* d) Improve visual appearance

Description : Sand is mixed with lime to a) Reduced cost b) Reduced setting time c) Prevent shrinkage and cracking* d) Improve visual appearance

Last Answer : c) Prevent shrinkage and cracking

Le Chatelier apparatus is used to determine which of the following properties for cement A) Soundness* b) Initial setting time c) Compressive strength d) Tensile strength

Description : Le Chatelier apparatus is used to determine which of the following properties for cement A) Soundness* b) Initial setting time c) Compressive strength d) Tensile strength

Last Answer : A) Soundness*

Which type of following cement is used for mass concrete work a) High Alumina cement b) Quick setting cement c) Rapid hardening cement d) Low heat cement*

Description : Which type of following cement is used for mass concrete work a) High Alumina cement b) Quick setting cement c) Rapid hardening cement d) Low heat cement*

Last Answer : d) Low heat cement*

The Most common admixture used to accelerate the initial setting of concrete is a) Gypsum b) Calcium chloride* c) Calcium carbonate d) Calcium bicarbonate

Description : The Most common admixture used to accelerate the initial setting of concrete is a) Gypsum b) Calcium chloride* c) Calcium carbonate d) Calcium bicarbonate

Last Answer : b) Calcium chloride*

As per norms for desirable amenity as given to model station, the retiring rooms should be provided on stations classified as --- (a) A & B* (b) A,B & C (c) A,B,C & D (d) A, B,C, D & E (e) A

Description : As per norms for desirable amenity as given to model station, the retiring rooms should be provided on stations classified as --- (a) A & B* (b) A,B & C (c) A,B,C & D (d) A, B,C, D & E (e) A

Last Answer : a) A & B*

As per norms for desirable amenity as given to model station, the clock rooms should be provided on stations classified as --- (a) A & B * (b) A,B & C (c) A,B,C & D (d) A, B,C, D & E (e) A

Description : As per norms for desirable amenity as given to model station, the clock rooms should be provided on stations classified as --- (a) A & B * (b) A,B & C (c) A,B,C & D (d) A, B,C, D & E (e) A

Last Answer : (a) A & B *

As per norms for desirable amenity as given to model station, the water coolers should be provided on stations classified as --- (a) A & B (b) A,B & C (c) A,B,C & D* (d) A, B,C, D & E (e) A

Description : As per norms for desirable amenity as given to model station, the water coolers should be provided on stations classified as --- (a) A & B (b) A,B & C (c) A,B,C & D* (d) A, B,C, D & E (e) A

Last Answer : (c) A,B,C & D*

As per norms for desirable amenity as given to model station, the parking facility/circulating area should be provided on stations classified as --- (a) A & B (b) A,B & C (c) A,B,C & D* (d) A, B,C, D & E

Description : As per norms for desirable amenity as given to model station, the parking facility/circulating area should be provided on stations classified as --- (a) A & B (b) A,B & C (c) A,B,C & D* (d) A, B,C, D & E

Last Answer : (c) A,B,C & D*

As per norms for desirable amenity as given to model station, the public address system should be provided on stations classified as --- (a) A & B (b) A,B & C* (c) A,B,C & D (d) A, B,C, D & E (e) A

Description : As per norms for desirable amenity as given to model station, the public address system should be provided on stations classified as --- (a) A & B (b) A,B & C* (c) A,B,C & D (d) A, B,C, D & E (e) A

Last Answer : (b) A,B & C*

As per norms for desirable amenity as given to model station, the book stalls should be provided on stations classified as --- (a) A & B (b) A,B & C* (c) A,B,C & D (d) A, B,C, D & E (e) A

Description : As per norms for desirable amenity as given to model station, the book stalls should be provided on stations classified as --- (a) A & B (b) A,B & C* (c) A,B,C & D (d) A, B,C, D & E (e) A

Last Answer : (b) A,B & C*

As per norms for desirable amenity as given to model station, the refreshment rooms should be provided on stations classified as --- (a) A & B* (b) A,B & C (c) A,B,C & D (d) A, B,C, D & E (e) A

Description : As per norms for desirable amenity as given to model station, the refreshment rooms should be provided on stations classified as --- (a) A & B* (b) A,B & C (c) A,B,C & D (d) A, B,C, D & E (e) A

Last Answer : (a) A & B*

Height of platform of a flag station in cutting above rail level is (a) Same height as Rail level (b) 305 mm above rail level (c) 455 mm above rail level (d) 840mm above rail level*

Description : Height of platform of a flag station in cutting above rail level is (a) Same height as Rail level (b) 305 mm above rail level (c) 455 mm above rail level (d) 840mm above rail level*

Last Answer : (d) 840mm above rail level*

Which of the facilities do not exist at halt station? (a) Facilities for stopping the train (b) Facilities for a small waiting (c) Facilities for crossing of train* (d) Facilities for book of passengers

Description : Which of the facilities do not exist at halt station? (a) Facilities for stopping the train (b) Facilities for a small waiting (c) Facilities for crossing of train* (d) Facilities for book of passengers

Last Answer : (c) Facilities for crossing of train*

Urinals & Latrines for A & B stations as norms for recommended level of facilities for railway station (a) Ndb/500 (b) Ndb/300 (c) Ndb/200* (d) None of the above

Description : Urinals & Latrines for A & B stations as norms for recommended level of facilities for railway station (a) Ndb/500 (b) Ndb/300 (c) Ndb/200* (d) None of the above

Last Answer : (c) Ndb/200*

Latrines & urinals must be provided on these type of stations as per minimum essential facility criteria (a) A, B, C, D, E & F type station (b) A,B,C,D & E type station* (c) A,B,C & D type station (d) A, B & C type station

Description : Latrines & urinals must be provided on these type of stations as per minimum essential facility criteria (a) A, B, C, D, E & F type station (b) A,B,C,D & E type station* (c) A,B,C & D type station (d) A, B & C type station

Last Answer : (b) A,B,C,D & E type station*

Foot over bridge must be provided on the following type of stations as per minimum essential facility criteria (a) A, B, C, & D class station (b) A,B & C class station* (c) A, & B class station (d) Only A class station

Description : Foot over bridge must be provided on the following type of stations as per minimum essential facility criteria (a) A, B, C, & D class station (b) A,B & C class station* (c) A, & B class station (d) Only A class station

Last Answer : b) A,B & C class station*

Numbers of taps on each platform of ‘C’ category station as per norms of minimum essential facility criteria are (a) 6* (b) 8 (c) 12 (d) 15

Description : Numbers of taps on each platform of ‘C’ category station as per norms of minimum essential facility criteria are (a) 6* (b) 8 (c) 12 (d) 15

Last Answer : (a) 6*

Numbers of taps on each platform of ‘B’ category station as per norms of minimum essential facility criteria are (a) 6 (b) 8 (c) 12* (d) 15

Description : Numbers of taps on each platform of ‘B’ category station as per norms of minimum essential facility criteria are (a) 6 (b) 8 (c) 12* (d) 15

Last Answer : (c) 12*

Numbers of taps on each platform of ‘A’ category station as per norms of minimum essential facility criteria are (a) 6 (b) 8 (c) 12 (d) 15*

Description : Numbers of taps on each platform of ‘A’ category station as per norms of minimum essential facility criteria are (a) 6 (b) 8 (c) 12 (d) 15*

Last Answer : d) 15*

Category “B” station are those, where annual passenger earnings are (a) Rs. 6 to 10 crores (b) Rs. 3 to 6 crores* (c) Rs. 1 to 3 crores (d) Less than Rs. 1 crore

Description : Category “B” station are those, where annual passenger earnings are (a) Rs. 6 to 10 crores (b) Rs. 3 to 6 crores* (c) Rs. 1 to 3 crores (d) Less than Rs. 1 crore

Last Answer : (b) Rs. 3 to 6 crores*

The project report of final location survey gives tabulated statement of the following (a) Curve abstract (b) Gradient abstract (c) Bridge abstract (d) Important bridges (e) Station machinery (f) Stations and stations sites (g) All the above*

Description : The project report of final location survey gives tabulated statement of the following (a) Curve abstract (b) Gradient abstract (c) Bridge abstract (d) Important bridges (e) Station machinery (f) Stations and stations sites (g) All the above*

Last Answer : g) All the above*

Demand of water for passengers on railway station is a)10 litres per passenger b)15 litres per passenger c) 20 litres for passenger d) 25 litres per passenger*

Description : Demand of water for passengers on railway station is a)10 litres per passenger b)15 litres per passenger c) 20 litres for passenger d) 25 litres per passenger*

Last Answer : d) 25 litres per passenger*

The maximum gradient in station yards should be ……. Unless special safely devices are adopted and/or special rules enforced. (a) 1 in 400* (B) 1 in 500 (c) 1 in 1000 (D) 1 In 600

Description : The maximum gradient in station yards should be ……. Unless special safely devices are adopted and/or special rules enforced. (a) 1 in 400* (B) 1 in 500 (c) 1 in 1000 (D) 1 In 600

Last Answer : (a) 1 in 400*

umber of hooters to be sounded, when accident takes place out station, but main line is clear: (a) 02 long (b) 03 long* (c) 03 long 01 short* (d) none of thes

Description : umber of hooters to be sounded, when accident takes place out station, but main line is clear: (a) 02 long (b) 03 long* (c) 03 long 01 short* (d) none of thes

Last Answer : (b) 03 long*

An accident has taken place at out station and main line is blocked and relief train is to be turned out without medical car. The hooter shall be: a. 3 long b. 4 long* c. 4 long, 1 short d. 3 long, and 1 short

Description : An accident has taken place at out station and main line is blocked and relief train is to be turned out without medical car. The hooter shall be: a. 3 long b. 4 long* c. 4 long, 1 short d. 3 long, and 1 short

Last Answer : b. 4 long