While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of the ray in plan from the true position will be (A) 0.02 cm (B) 0.15 cm (C) 0.2 cm (D) 0.1 cm

Question

While setting a plane table at a station it was found that the error in centering was 30 cm away from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the displacement of the end of the ray in plan from the true position will be (A) 0.02 cm (B) 0.15 cm (C) 0.2 cm (D) 0.1 cm

While setting a plane table at a station it was found that the error in centering was 30 cm away
from the ray of length 40 m drawn from the station. If the scale of the plan is 1 cm = 2 cm, the
displacement of the end of the ray in plan from the true position will be
(A) 0.02 cm
(B) 0.15 cm
(C) 0.2 cm
(D) 0.1 cm

asked Oct 11, 2021 by prathmesh

1 Answer

Related questions

In setting up a plane table at any station (A) Levelling is done first (B) Centering is done first (C) Both levelling and centering are done simultaneously (D) Orientation is done first

Description : In setting up a plane table at any station (A) Levelling is done first (B) Centering is done first (C) Both levelling and centering are done simultaneously (D) Orientation is done first

Last Answer : (C) Both levelling and centering are done simultaneously

In setting up a plane table at any station (a) Leveling is done first (b) Centering is done first (c) Both leveling and centering are done simultaneously * (d) Orientation is done first

Description : In setting up a plane table at any station (a) Leveling is done first (b) Centering is done first (c) Both leveling and centering are done simultaneously * (d) Orientation is done first

Last Answer : c) Both leveling and centering are done simultaneously *

The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Description : The operation of revolving a plane table about its vertical axis so that all lines on the sheet become parallel to corresponding lines on the ground, is known (A) Levelling (B) Centering (C) Orientation (D) Setting

Last Answer : (C) Orientation

After fixing the plane table to the tripod, the main operations which are needed at each plane table station are (i) Levelling (ii) Orientation (iii) Centering The correct sequence of these operations is (A) (i), (ii), (iii) (B) (i), (iii), (ii) (C) (iii), (i), (ii) (D) (ii), (iii), (i)

Description : After fixing the plane table to the tripod, the main operations which are needed at each plane table station are (i) Levelling (ii) Orientation (iii) Centering The correct sequence of these operations is (A) (i), (ii), (iii) (B) (i), (iii), (ii) (C) (iii), (i), (ii) (D) (ii), (iii), (i)

Last Answer : (B) (i), (iii), (ii)

Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of offset should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Description : Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of ... should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Last Answer : (B) 28.28 m

The instrument used for accurate centering in plane table survey is (A) Spirit level (B) Alidade (C) Plumbing fork (D) Trough compass

Description : The instrument used for accurate centering in plane table survey is (A) Spirit level (B) Alidade (C) Plumbing fork (D) Trough compass

Last Answer : (C) Plumbing fork

Centering error of a theodolite produces an error (A) In all angles equally (B) Which does not vary with the direction or pointing (C) Which varies with the direction of pointing and inversely with the length of sight (D) None of these

Description : Centering error of a theodolite produces an error (A) In all angles equally (B) Which does not vary with the direction or pointing (C) Which varies with the direction of pointing and inversely with the length of sight (D) None of these

Last Answer : (C) Which varies with the direction of pointing and inversely with the length of sight

For orientation of a plane table with three points A, B and C, Bessel's drill is (A) Align B through A and draw a ray towards C, align A through B and draw A ray towards C, finally align C through the point of intersection of the previously drawn rays (B) Align C through A and draw a ray towards B, align A through C and draw A ray towards B, finally align B through the point of intersection of the previously drawn rays (C) Align c through B and draw a ray towards A, align B through C and draw A ray towards A, finally align A, through the point of intersection of the previously, drawn rays(D) In the first two steps any two of the points may be used and a ray drawn towards the third point, which is sighted through the point of intersection of previously drawn rays in the final step.

Description : For orientation of a plane table with three points A, B and C, Bessel's drill is (A) Align B through A and draw a ray towards C, align A through B and draw A ray towards C, finally ... the third point, which is sighted through the point of intersection of previously drawn rays in the final step.

Last Answer : (D) In the first two steps any two of the points may be used and a ray drawn towards the third point, which is sighted through the point of intersection of previously drawn rays in the final step.

To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab in line with AB. A ray is then drawn towards and at the table is oriented by back ray method. The orientation so obtained, is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Description : To orient a plane table at a point roughly south of the mid-point of two inaccessible conical hill stations and in the plains, a point is selected in line with AB and table is oriented at by bringing ab ... , is (A) Unique and correct (B) Incorrect (C) Manifold and correct (D) Not reliable

Last Answer : (C) Manifold and correct

A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff readings at and were 1.22 and 1.06. With the level set up at , the readings at and were 1.55 and 1.37. The collimation error per 100 m length of sight is (A) 0.02 m inclined upwards (B) 0.04 m inclined downwards (C) 0.04 m inclined upward (D) None of these

Description : A dumpy level was set up at the midpoint between two pegs A and B, 50 m apart and the staff readings at and were 1.22 and 1.06. With the level set up at , the readings at and were 1.55 and ... upwards (B) 0.04 m inclined downwards (C) 0.04 m inclined upward (D) None of these

Last Answer : (B) 0.04 m inclined downwards

A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent period is 1.5 ms. The intracellular electrode is 6 cm form the anode of the simulator and 4.5 cm from the cathode of the simulator. What is the conduction velocity of the axon. a. 15 m/s b. 30 m/s c. 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Description : A squid axon is placed on stimulating electrodes, and an intracellular electrode is inserted and connected through a cathode-ray oscilloscope (CRO) to an indifferent electrode. When the axon is stimulated, the latent ... . 40 m/s d. 67.5 m/s e. This cannot be determined from the information given

Last Answer : 30 m/s

A standard steel tape of length 30 m and cross-section 15 × 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of steel tape is 2.2 × 106 kg/cm2 , the correction to be applied is (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Description : A standard steel tape of length 30 m and cross-section 15 1.0 mm was standardised at 25°C and at 30 kg pull. While measuring a base line at the same temperature, the pull applied was 40 kg. If the modulus of elasticity of ... (A) - 0.000909 m (B) + 0.0909 m (C) 0.000909 m (D) None of these

Last Answer : (A) - 0.000909 m

The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error such that each ray is equally rotated either clockwise or anti clockwise 5. The points obtained by three rays are the correct location. The correct sequence is (A) 1, 3, 2, 4, 5 (B) 1, 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Description : The operation of resection involves the following steps 1. Rough orientation of the plane table 2. The three lines form a triangle of error 3. Drawing lines back through the three control points 4. Select a point in the triangle of error ... 2, 3, 4, 5 (C) 1, 4, 3, 2, 5 (D) 1, 3, 2, 4, 5

Last Answer : (A) 1, 3, 2, 4, 5

10. An object 5 cm in length is held 25 cm away from a converging lens of focal length 10 cm. Draw the ray diagram and find the position, size and the nature of the image formed. -Physics-10

Description : 10. An object 5 cm in length is held 25 cm away from a converging lens of focal length 10 cm. Draw the ray diagram and find the position, size and the nature of the image formed. -Physics-10

Last Answer : Height of the Object, h0 = 5 cm Distance of the object from converging lens, u = -25 cm Focal length of a converging lens, f = 10 cm Using lens formula, Thus, the image is inverted and formed at a distance of 16.7 cm behind the lens and measures 3.3 cm. The ray diagram is shown below.

A well penetrates to 30 m below the static water table. After 24 hours of pumping at 31.40 litres/minute, the water level in a test well at a distance of 80 m is lowered by 0.5 m and in a well 20 m away water is lowered by 1.0 m. The transmissibility of the aquifer, is (A) 1.185 m2 /minute(B) 1.285 m2/minute (C) 1.385 m2/minute (D) 1.485 m2/minute

Description : A well penetrates to 30 m below the static water table. After 24 hours of pumping at 31.40 litres/minute, the water level in a test well at a distance of 80 m is lowered by 0.5 m and in a well 20 m away water is ... 1.185 m2 /minute (B) 1.285 m2 /minute (C) 1.385 m2 /minute (D) 1.485 m2 /minute

Last Answer : Answer: Option C

Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Description : Locating the position of a plane table station with reference to three known points, is known as (A) Intersection method (B) Radiation method (C) Resection method (D) Three point problem

Last Answer : (D) Three point problem

In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Description : In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Last Answer : (b) Resection

To avoid large centering error with very short legs, observations are generally made (A) To chain pins (B) By using optical system for centering the theodolite (C) To a target fixed on theodolite tripod on which theodolite may be fitted easily (D) All the above

Description : To avoid large centering error with very short legs, observations are generally made (A) To chain pins (B) By using optical system for centering the theodolite (C) To a target fixed on theodolite tripod on which theodolite may be fitted easily (D) All the above

Last Answer : (C) To a target fixed on theodolite tripod on which theodolite may be fitted easily

Pick up the correct statement from the following: (A) To locate a gross error in bearing that may exist in controlled theodolite traverse, we may plot the traverse from each end. The traverse station having the same coordinates by each route is the one where the error lies (B) To locate a gross error in bearing, in a controlled traverse, we plot the traverse and the station through which perpendicular to sector of the closing line passes is the station at which the error was made (C) To locate a gross error due to taping in a controlled traverse, we plot the traverse to a convenient scale. The bearing of the closing error will be approximately the same as that of the leg in which the gross error consists (D) All the above

Description : Pick up the correct statement from the following: (A) To locate a gross error in bearing that may exist in controlled theodolite traverse, we may plot the traverse from each end. The traverse station having ... the same as that of the leg in which the gross error consists (D) All the above

Last Answer : (D) All the above

If a 30 m chain diverges through a perpendicular distance d from its correct alignment, the error in length, is (A) (d²/60) m (B) (d²/30) m (C) (d²/40) m (D) (d/30) m

Description : If a 30 m chain diverges through a perpendicular distance d from its correct alignment, the error in length, is (A) (d²/60) m (B) (d²/30) m (C) (d²/40) m (D) (d/30) m

Last Answer : (A) (d²/60) m

To prevent movement of moisture from sub-grade to road pavement on embankments about 0.6 m to 1 m higher than water table, the thickness of cut off layer of coarse sand used, is (A) 15 cm (B) 20 cm (C) 30 cm (D) None of these

Description : To prevent movement of moisture from sub-grade to road pavement on embankments about 0.6 m to 1 m higher than water table, the thickness of cut off layer of coarse sand used, is (A) 15 cm (B) 20 cm (C) 30 cm (D) None of these

Last Answer : Answer: Option D

As shown in the illustrations, which statement characterizes steering operations using the 'non-followup controller'? EL-0097 A. The rudder responds while the switch is held left or right and returns to mid-ships when the self-centering switch is released. B. The rudder responds while the switch is held left or right and remains in position when the self-centering switch is released. C. The rudder responds to the gyro input if the switch is held left and responds to the Wheel if the switch is held right; in both cases, it returns to mid-ships with switch 'off'. D. The rudder responds to the Wheel if the switch is held left and responds to the gyro input if the switch is held right; in both cases, it remains in position when switch is 'off'.

Description : As shown in the illustrations, which statement characterizes steering operations using the 'non-followup controller'? EL-0097 A. The rudder responds while the switch is held left or right and returns to mid- ... the switch is held right; in both cases, it remains in position when switch is 'off'.

Last Answer : Answer: B

Two concave lenses of 60 cm focal length are cemented on either side of a convex lens of 15 cm focal length. The focal length of the combination is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Description : Two concave lenses of 60 cm focal length are cemented on either side of a convex lens of 15 cm focal length. The focal length of the combination is (A) 10 cm (B) 20 cm (C) 30 cm (D) 40 cm

Last Answer : (C) 30 cm

An object 2 cm high is placed at a distance of 64 cm from a white screen. On placing a convex lens at a distance of 32 cm from the object it is found that a distinct image of the object is formed on the screen. What is the focal length of the convex lens and size of the image formed on the screen? Draw a ray diagram to show the formation of the image in this position of the object with respect to the lens. -Physics

Description : An object 2 cm high is placed at a distance of 64 cm from a white screen. On placing a convex lens at a distance of 32 cm from the object it is found that a distinct image of the object ... diagram to show the formation of the image in this position of the object with respect to the lens. -Physics

Last Answer : Since, object-screen distance is double of object-lens separation, the object is at a distance of 2f from the lens and the image should be of the same size of the object.

While working on a plane table, the correct rule is: (A) Draw continuous lines from all instrument stations (B) Draw short rays sufficient to contain the points sought (C) Intersection should be obtained by actually drawing second rays (D) Take maximum number of sights as possible from each station to distant objects

Description : While working on a plane table, the correct rule is: (A) Draw continuous lines from all instrument stations (B) Draw short rays sufficient to contain the points sought (C) Intersection ... drawing second rays (D) Take maximum number of sights as possible from each station to distant objects

Last Answer : (B) Draw short rays sufficient to contain the points sought

A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Description : A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one- ... beam, the number of shear stirrups required, is (A) 30 (B) 35 (C) 40 (D) 45

Last Answer : Answer: Option C

The radius of a sphere is 8 cm and 0.02 cm is the error in its measurement. Find the approximate error in its volume.

Description : The radius of a sphere is 8 cm and 0.02 cm is the error in its measurement. Find the approximate error in its volume.

Last Answer : The radius of a sphere is 8 cm and 0.02 cm is the error in its measurement. Find the approximate error in its volume.

A bar graph is drawn to the scale 1 cm = 4x units .The length of the bar represeting a quantity 1000 units is 1.25 cm . Find x

Description : A bar graph is drawn to the scale 1 cm = 4x units .The length of the bar represeting a quantity 1000 units is 1.25 cm . Find x

Last Answer : A bar graph is drawn to the scale 1 cm = 4x units .The length of the bar represeting a quantity 1000 units is 1.25 cm . Find x

A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of maximum compession of spring, neglecting friction to that while considering friction would be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Description : A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of ... be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Last Answer : a. More than one

One of the Lehmann's rules of plane tabling, is (A) Location of the instrument station is always distant from each of the three rays from the known points in proportion to their distances (B) When looking in the direction of each of the given points, the instrument station will be on the right side of one and left side of the other ray (C) When the instrument station is outside the circumscribing circle its location is always on the opposite side of the ray to the most distant point as the inter-section of the other two rays (D) None of these

Description : One of the Lehmann's rules of plane tabling, is (A) Location of the instrument station is always distant from each of the three rays from the known points in proportion to their distances ( ... to the most distant point as the inter-section of the other two rays (D) None of these

Last Answer : (A) Location of the instrument station is always distant from each of the three rays from the known points in proportion to their distances

11. If a body floating in a liquid does not return back to its original position and heels farther "away when given a small angular displacement, the body is said to be in neutral equilibrium. A) Yes B) No

Description : 11. If a body floating in a liquid does not return back to its original position and heels farther "away when given a small angular displacement, the body is said to be in neutral equilibrium. A) Yes B) No

Last Answer : B

A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free end. If the modulus of elasticity of the material is 0.2 × 106 N/mm2 , the deflection of the free end, is (A) 2 mm (B) 3 mm (C) 4 mm (D) 5 mm

Description : A cantilever of length 2 cm and depth 10 cm tapers in plan from a width 24 cm to zero at its free end. If the modulus of elasticity of the material is 0.2 × 106 N/mm2 , the deflection of the free end, is (A) 2 mm (B) 3 mm (C) 4 mm (D) 5 mm

Last Answer : (D) 5 mm

Which of the following introduces an error of about 1 in 1000 if 20 m chain is used? (A) Length of chain 20 mm wrong (B) One end of the chain 0.9 m off the line (C) One end of chain 0.9 m higher than the other (D) All the above

Description : Which of the following introduces an error of about 1 in 1000 if 20 m chain is used? (A) Length of chain 20 mm wrong (B) One end of the chain 0.9 m off the line (C) One end of chain 0.9 m higher than the other (D) All the above

Last Answer : (D) All the above

If 50 m point of a 100 m tape is 50 cm off line, and 50 m sections are straight, an error is generated equal to (A) 1/10,000 (B) 1/15,000 (C) 1/20,000 (D) 1/25,000

Description : If 50 m point of a 100 m tape is 50 cm off line, and 50 m sections are straight, an error is generated equal to (A) 1/10,000 (B) 1/15,000 (C) 1/20,000 (D) 1/25,000

Last Answer : (C) 1/20,000

A man walk 10 m towards east, then 40 m towards North and in the last 30 m towards west find the net displacement :-

Description : A man walk 10 m towards east, then 40 m towards North and in the last 30 m towards west find the net displacement :-

Last Answer : A man walk 10 m towards east, then 40 m towards North and in the last 30 m towards west find the net displacement : ... 5 m` C. 30 m D. `30 sqrt 5 m`

A convex lens has a focal length of 10 cm. At what distance from the lens should the object be placed so that it forms a real and inverted image 20 cm away from the lens? What would be the size of the image formed if the object is 2 cm high? With the help of a ray diagram show the formation of the image by the lens in this case. -Physics

Description : A convex lens has a focal length of 10 cm. At what distance from the lens should the object be placed so that it forms a real and inverted image 20 cm away from the lens? What would be the size of ... ? With the help of a ray diagram show the formation of the image by the lens in this case. -Physics

Last Answer : This is the Answe:

Pick up the incorrect statement from the following: (A) An activity of a project is denoted by an arrow on the net work (B) The tail of the arrow indicates the start of the activity (C) The head of the arrow indicates the end of the activity (D) The arrows are drawn to scale from left to right

Description : Pick up the incorrect statement from the following: (A) An activity of a project is denoted by an arrow on the net work (B) The tail of the arrow indicates the start of the activity (C) The head of the arrow indicates the end of the activity (D) The arrows are drawn to scale from left to right

Last Answer : (D) The arrows are drawn to scale from left to right

The length of the side of warning sign boards of roads is (A) 30 cm (B) 40 cm (C) 45 cm (D) 50 cm

Description : The length of the side of warning sign boards of roads is (A) 30 cm (B) 40 cm (C) 45 cm (D) 50 cm

Last Answer : Answer: Option C

The dimensions of a 35 litre forma for measuring aggregates by volume, are: (A) length 30 cm, breadth 25 cm, height 30 cm (B) length 39 cm, breadth 25 cm, height 32 cm (C) length 27 cm, breadth 27 cm, height 48 cm (D) length 220 cm, breadth 25 cm, height 40 cm

Description : The dimensions of a 35 litre forma for measuring aggregates by volume, are: (A) length 30 cm, breadth 25 cm, height 30 cm (B) length 39 cm, breadth 25 cm, height 32 cm (C) length 27 cm, breadth 27 cm, height 48 cm (D) length 220 cm, breadth 25 cm, height 40 cm

Last Answer : Answer: Option C

The slope correction for a length of 30 m along a gradient of 1 in 20, is (A) 3.75 cm (B) 0.375 cm (C) 37.5 cm (D) 2.75 cm

Description : The slope correction for a length of 30 m along a gradient of 1 in 20, is (A) 3.75 cm (B) 0.375 cm (C) 37.5 cm (D) 2.75 cm

Last Answer : (A) 3.75 cm

The percentage of fluoride present in dental enamel is (A) 0.01–0.02 (B) 0.05–0.10 (C) 0.15–0.20 (D) 0.20–0.40

Description : The percentage of fluoride present in dental enamel is (A) 0.01–0.02 (B) 0.05–0.10 (C) 0.15–0.20 (D) 0.20–0.40

Last Answer : Answer : A

The 'fix' of a plane table station with three known points, is bad if the plane table station lies (A) In the great triangle (B) Outside the great triangle (C) On the circumference of the circumscribing circle (D) None of these

Description : The 'fix' of a plane table station with three known points, is bad if the plane table station lies (A) In the great triangle (B) Outside the great triangle (C) On the circumference of the circumscribing circle (D) None of these

Last Answer : (C) On the circumference of the circumscribing circle

The 'fix' of a plane table from three known points, is good, if (A) Middle station is nearest (B) Middle station is farthest (C) Either the right or left station is nearest (D) None of these

Description : The 'fix' of a plane table from three known points, is good, if (A) Middle station is nearest (B) Middle station is farthest (C) Either the right or left station is nearest (D) None of these

Last Answer : (A) Middle station is nearest

Rapid gravity filter can only remove turbidity of water upto (A) 15 to 25 gm/litre (B) 25 to 30 gm/litre (C) 30 to 35 cm/litre (D) 35 to 40 gm/litre

Description : Rapid gravity filter can only remove turbidity of water upto (A) 15 to 25 gm/litre (B) 25 to 30 gm/litre (C) 30 to 35 cm/litre (D) 35 to 40 gm/litre

Last Answer : (D) 35 to 40 gm/litre

The area of parallelogram PQRS is 88 cm sq. A perpendicular from S is drawn to intersect PQ at M. If SM = 8 cm, then find the length of PQ. -Maths 9th

Description : The area of parallelogram PQRS is 88 cm sq. A perpendicular from S is drawn to intersect PQ at M. If SM = 8 cm, then find the length of PQ. -Maths 9th

Last Answer : Given area of parallelogram = 88 cm² And SM = 8cm Area of a parallelogram = height × base (Height is the measurement of a perpendicular drawn from one side to other) Here, Area of PQRS = SM × PQ 88cm² = 8cm × PQ 11cm = PQ

To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Description : To prevent movement of moisture from sub-grade to road pavement at the same level as that of water-table, thickness of a cut off layer of coarse sand, is (A) 15 cm (B) 20 cm (C) 30 cm (D) 45 cm

Last Answer : Answer: Option A

In a telescope the object glass of focal length 14 cm, is located at 20 cm from the diaphragm. The focussing lens is midway between them when a staff 16.50 m away is focussed. The focal length of the focussing lens, is (A) 5.24 cm (B) 6.24 cm (C) 7.24 cm (D) 8.24 cm

Description : In a telescope the object glass of focal length 14 cm, is located at 20 cm from the diaphragm. The focussing lens is midway between them when a staff 16.50 m away is focussed. The focal length of the focussing lens, is (A) 5.24 cm (B) 6.24 cm (C) 7.24 cm (D) 8.24 cm

Last Answer : (C) 7.24 cm

In a solution of the three-point problem in plane table surveying, the converging of error is attained through : (a) Concyclic concept (b) Bessel’s method (c) Triangle of error (d) Tracing paper method

Description : In a solution of the three-point problem in plane table surveying, the converging of error is attained through : (a) Concyclic concept (b) Bessel’s method (c) Triangle of error (d) Tracing paper method

Last Answer : (c) Triangle of error

If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is (A) 40 (B) 45 (C) 50 (D) 55

Description : If the effective length of a 32 cm diameter R.C.C. column is 4.40 m, its slenderness ratio, is (A) 40 (B) 45 (C) 50 (D) 55

Last Answer : Answer: Option D

The limiting length of an offset does not depend upon (A) Accuracy of the work (B) Method of setting out perpendiculars (C) Scale of plotting (D) Indefinite features to be surveyed

Description : The limiting length of an offset does not depend upon (A) Accuracy of the work (B) Method of setting out perpendiculars (C) Scale of plotting (D) Indefinite features to be surveyed

Last Answer : (D) Indefinite features to be surveyed

prathmesh · Answer 1 · 2021-10-11T17:28:52+0000

Answer :

(B) 0.15 cm

answered Oct 11, 2021 by prathmesh

Please log in or register to add a comment.

Please log in or register to answer this question.

1 Answer

Answer :

Please log in or register to add a comment.

Related questions