A pulse waveform has a high time of 8 ms and a pulse width of 32 ms. The duty - cycle is equal to:

A pulse waveform has a high time of 8 ms and a pulse width of 32 ms. The duty - cycle is equal to: A. 25% B. 50% C. 1% D. 100%
by

1 Answer

Answer :

A pulse waveform has a high time of 8 ms and a pulse width of 32 ms. The duty - cycle is equal to:  25%

by

Related questions

A certain pulse measures 10ms and has a period of 50ms. The duty cycle is __

Description : A certain pulse measures 10ms and has a period of 50ms. The duty cycle is __

Last Answer : 10ms/50ms = 20%

What is mean by pulse width modulation?

Last Answer : PWM means the width of pulse signal can be varied by varying ton & tOFF.

32 With S2 closed and S1 open, the current waveform in the delta winding will be [GATE 2009] A. a sinusoidal at fundamental frequency B. flat-topped with third harmonic C. only third-harmonic D. none of these

Description : 32 With S2 closed and S1 open, the current waveform in the delta winding will be [GATE 2009] A. a sinusoidal at fundamental frequency B. flat-topped with third harmonic C. only third-harmonic D. none of these

Last Answer : C. Only third harmonic

It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency

Description : It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency

Last Answer : A. Bandwidth Distance Product

A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Description : A pulse modulation technique as the width of a constant amplitude pulse is varied proportional to the amplitude of the analog signal at the time the signal is sampled.

Last Answer : PWM, PLM, PDM

What is pulse-width modulation (PWM) in Arduino?

Description : What is pulse-width modulation (PWM) in Arduino?

Last Answer : Pulse-width modulation (PWM) in Arduino is a technique used to control the brightness of an LED or the speed of a motor by varying the duty cycle of a digital signal.

What is a pulse-width modulation (PWM) signal in Arduino?

Description : What is a pulse-width modulation (PWM) signal in Arduino?

Last Answer : A PWM signal in Arduino is a digital signal that varies the width of the pulse to simulate an analog signal.

What is Pulse Width Modulation?

Description : What is Pulse Width Modulation?

Last Answer : Ans-Pulse width modulation is a modulation technique in which the width of the pulse is varied in accordance with the message signal. Pulse width Modulation is abbreviated as PWM. PWM can be used ... the pulse train and recover an average analog waveform. PWM is used in sound synthesis circuits.

What component in a blocking oscillator controls pulse width?

Description : What component in a blocking oscillator controls pulse width?

Last Answer : Transformer.

What controls transmitter pulse width?

Description : What controls transmitter pulse width?

Last Answer : The modulator.

What controls transmitter pulse width?

Description : What controls transmitter pulse width?

Last Answer : The modulator.

What width is the pulse radiated by fire-control tracking radar?

Description : What width is the pulse radiated by fire-control tracking radar?

Last Answer : Very narrow.

What term is used to describe the product of pulse width and pulse-repetition frequency?

Description : What term is used to describe the product of pulse width and pulse-repetition frequency?

Last Answer : Duty cycle.

The width of the vertical sync pulse in the Philippine TV system is

Description : The width of the vertical sync pulse in the Philippine TV system is

Last Answer : 3H

The width of the vertical sync pulse in the Philippine TV system is

Description : The width of the vertical sync pulse in the Philippine TV system is

Last Answer : 3H

Pulse width modulation may be generated:

Description : Pulse width modulation may be generated:

Last Answer : with a monostable multivibrator

For the most Static RAM the write pulse width should be at least a) 10ns b) 60ns c) 300ns d) 1μs

Description : For the most Static RAM the write pulse width should be at least a) 10ns b) 60ns c) 300ns d) 1μs

Last Answer : b) 60ns

An eight stage ripple counter uses a flip-flop with propagation delay of 75 nanoseconds. The pulse width of the strobe is 50ns. The frequency of the input signal which can be used for proper operation of the counter is approximately (A) 1 MHz. (B) 500 MHz. (C) 2 MHz. (D) 4 MHz.

Description : An eight stage ripple counter uses a flip-flop with propagation delay of 75 nanoseconds. The pulse width of the strobe is 50ns. The frequency of the input signal which can be used for proper operation of the counter is approximately (A) 1 MHz. (B) 500 MHz. (C) 2 MHz. (D) 4 MHz.

Last Answer : Maximum time taken for all flip-flops to stabilize is 75ns x 8 + 50 = 650ns. Frequency of operation must be less than 1/650ns = 1.5 MHz.

In single pulse modulation of PWM inverters, third harmonic can be eliminated if pulse width is

Description : In single pulse modulation of PWM inverters, third harmonic can be eliminated if pulse width is equal to   (a) 30o (b) 60o (c) 120o (d) 150o

Last Answer : In single pulse modulation of PWM inverters, third harmonic can be eliminated if pulse width is equal to 120o

A 3 -stage ripple counter has Flip Flop with propagation delay of 25 nsec and pulse width of strobe input 10

Description : A 3 -stage ripple counter has Flip Flop with propagation delay of 25 nsec and pulse width of strobe input 10 nsec. Then the maximum operating frequency at which counter operates reliably is

Last Answer : A 3 -stage ripple counter has Flip Flop with propagation delay of 25 nsec and pulse width of strobe input 10 nsec. Then the maximum operating frequency at which counter operates reliably is 12.67 MHz

Ripple in output current of a step-down chopper feeding RLE load is maximum, when duty cycle is equal to:

Description : Ripple in output current of a step-down chopper feeding RLE load is maximum, when duty cycle is equal to:  (1) 1 (2) 0.5 (3) 0.75 (4) 0.33

Last Answer : Ripple in output current of step down Chopper feeding a RLE load is maximum, when duty cycle is equal to 0.5

The Width of a processor’s data path is measured in bits. Which of the following are common data paths? A) 8 bits B) 12 bits C) 16 bits D) 32 bits

Description : The Width of a processor’s data path is measured in bits. Which of the following are common data paths? A) 8 bits B) 12 bits C) 16 bits D) 32 bits

Last Answer : Answer : A

The Width of a processor’s data path is measured in bits. Which of the following are common data paths? a. 8 bits b. 12 bits c. 16 bits d. 32 bits

Description : The Width of a processor’s data path is measured in bits. Which of the following are common data paths? a. 8 bits b. 12 bits c. 16 bits d. 32 bits

Last Answer : a. 8 bits

The Width of a processor’s data path is measured in bits. Which of the following are common data paths? a. 8 bits b. 12 bits c. 16 bits d. 32 bits

Description : The Width of a processor’s data path is measured in bits. Which of the following are common data paths? a. 8 bits b. 12 bits c. 16 bits d. 32 bits

Last Answer : a. 8 bits

Define the terms related to a.c. supply with waveform : i) Instantaneous value ii) Time period iii) Amplitude iv) Phase difference.

Description : Define the terms related to a.c. supply with waveform : i) Instantaneous value ii) Time period iii) Amplitude iv) Phase difference. 

Last Answer : i) Instantaneous value: The instantaneous value is the value of an alternating quantity (it may ac voltage or ac current or ac power) at a particular instant of time in the cycle .  OR  ... difference: Phase difference is the difference in phase angle between two sinusoids or phasors. 

Draw sinusoidal waveform of 3 phase emf and indicate the phase sequence.

Description : Draw sinusoidal waveform of 3 phase emf and indicate the phase sequence.

Last Answer : Phase sequence is R-Y-B.

Explain lagging quantity and leading quantity, explain this concept with voltage and current waveform

Description : Explain lagging quantity and leading quantity, explain this concept with voltage and current waveform

Last Answer : When two alternating quantities attain their respective zero or peak values simultaneously, the quantities are said to be in-phase quantities. When the quantities do not attain their respective zero or ... current is leading the voltage or the voltage is said to be lagging behind the current.

Explain full wave bridged rectifier with the help of circuit diagram and input output waveform.

Description : Explain full wave bridged rectifier with the help of circuit diagram and input output waveform.

Last Answer : 1. In positive half cycle (0 to Π): The end A of the secondary winding becomes positive and end B negative. This makes diode D1 and D4 forward biased while diode D2 and D3 are reverse biased. These two diodes will ... D2 and D3 when it is conducting is as follows.  B - D2 - RL - D3 - A 

A circuit that binds the upper or lower extreme of a waveform to a fixed DC voltage level is called ______

Description : A circuit that binds the upper or lower extreme of a waveform to a fixed DC voltage level is called ______ A) DC voltage restorer B) Clamping circuit C) Both A and B D) None of these

Last Answer : A circuit that binds the upper or lower extreme of a waveform to a fixed DC voltage level is called ______ A) DC voltage restorer B) Clamping circuit C) Both A and B D) None of these

The operating characteristics of a reactance type distance relay (A) a stepped waveform for increasing

Description : The operating characteristics of a reactance type distance relay (A) a stepped waveform for increasing reactance (B) a straight line for a constant reactance (C) a circle for a constant reactance (D) a set of circles for variable reactances

Last Answer : The operating characteristics of a reactance type distance relay a straight line for a constant reactance

Beat instruction register prepared in form a) MS 32 b) MS 31 c) MS 30 d) MS 24

Description : Beat instruction register prepared in form a) MS 32 b) MS 31 c) MS 30 d) MS 24

Last Answer : a) MS 32

The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Description : The spacing between the discs in the gang bolt ranges cm for lighy duty and cm heavy -duty harrows i. 15-25 and 25-30 c) 40-45 and 45-50 ii. 20-30 and 30-40. d) 15-25 and 32-36

Last Answer : 15-25 and 25-30

Which of the following ECG characteristics is usually seen when a patient’s serum potassium level is low? a) U wave The U wave is an ECG waveform characteristic that may reflect Purkinje fiber repolarization. It is usually seen when a patient’s serum potassium level is low. b) T wave The T wave is an ECG characteristic reflecting repolarization of the ventricles. It may become tall or “peaked” if a patient’s serum potassium level is high. c) P wave The P wave is an ECG characteristic reflecting conduction of an electrical impulse through the atria. d) QT interval The QT interval is an ECG characteristic reflecting the time from ventricular depolarization to repolarization.

Description : Which of the following ECG characteristics is usually seen when a patient's serum potassium level is low? a) U wave The U wave is an ECG waveform characteristic that may ... interval The QT interval is an ECG characteristic reflecting the time from ventricular depolarization to repolarization.

Last Answer : a) U wave The U wave is an ECG waveform characteristic that may reflect Purkinje fiber repolarization. It is usually seen when a patient’s serum potassium level is low.

The time interval that a waveform is high (or low) is the ___ of the signal.

Description : The time interval that a waveform is high (or low) is the ___ of the signal.

Last Answer : pulse width

Which is NOT a correct consequence of surgical removal of portions of these glands? A) adrenal cortex--bronzing of skin, no glucose at stress, dehydration and death B) thymus--decrease in sex drive and changes in secondary sexual characteristics C) parathyroid glands--drop in blood calcium level and tetany (muscles shake) D) ovaries--alteration in menstrual cycle and change in secondary sex characteristics E) adult thyroid--low pulse rate and body temperature and lethargy

Description : Which is NOT a correct consequence of surgical removal of portions of these glands? A) adrenal cortex--bronzing of skin, no glucose at stress, dehydration and death B) thymus--decrease ... change in secondary sex characteristics E) adult thyroid--low pulse rate and body temperature and lethargy

Last Answer : B) thymus--decrease in sex drive and changes in secondary sexual characteristics

What is the width of Broad guage Railway line in India? A. 2 m B. 1.67 m C. 1.32 m D. 1 m

Description : What is the width of Broad guage Railway line in India? A. 2 m B. 1.67 m C. 1.32 m D. 1 m

Last Answer : B [1.67 m] Explanation: Road gauge is also called wide gauge or large line. The distance between the two tracks in these railway gauges is 1676 mm (5 ft 6 in).

Consider a 32 - bit microprocessor, with a 16 - bit external data bus, driven by an 8 MHz input clock. Assume that the microprocessor has a bus cycle whose minimum duration equals four input clock cycles. What is the maximum data transfer rate for this microprocessor? (A) 8x106 bytes/sec (B) 4x106 bytes/sec (C) 16x106 bytes/sec (D) 4x109 bytes/sec

Description : Consider a 32 - bit microprocessor, with a 16 - bit external data bus, driven by an 8 MHz input clock. Assume that the microprocessor has a bus cycle whose minimum duration equals four input clock cycles. What ... (A) 8x106 bytes/sec (B) 4x106 bytes/sec (C) 16x106 bytes/sec (D) 4x109 bytes/sec 

Last Answer : (B) 4x106 bytes/sec

Does A Compressor That Has 100% Duty Cycle Mean That I Can Run The Compressor All The Time? Can I Run My Compressor 24 Hours A Day?

Description : Does A Compressor That Has 100% Duty Cycle Mean That I Can Run The Compressor All The Time? Can I Run My Compressor 24 Hours A Day?

Last Answer : No, you’ve got to remember that duty cycle is rated at 100PSI, at an ambient temperature of 72°F, but certainly a 100% duty cycle compressor can run for much longer periods of time than a 30% duty compressor under the same conditions.

What is meant by Digital Cycle Duty Cycle ?

Description : What is meant by Digital Cycle Duty Cycle ?

Last Answer : Duty Cycle = Vibration / Period X 100% . For example , if tw = T / 2 , Duty cycle = 50% .

What is meant by duty-cycle?

Description : What is meant by duty-cycle?

Last Answer : Duty cycle is defined as the ratio of the on time of the chopper to the total time period of the chopper. It is denoted by α.

What is effect of having more duty cycle and less duty cycle?

Description : What is effect of having more duty cycle and less duty cycle?

Last Answer : If the duty cycle D is greater than 0.5, the core would not be completely demagnetized at the end of the off-period, and a DC magnetization of the core would build up, resulting in core saturation.

What is duty cycle?

Description : What is duty cycle?

Last Answer : It is the ratio of the ON time of the chopper to total time period of the chopper. D = Ton / [Ton + Toff]

What Is Duty Cycle?

Description : What Is Duty Cycle?

Last Answer : A compressor’s duty cycle determines the percentage of run time in a full cycle. A full cycle is determined by adding the compressor run time to its rest time.

In dc choppers per unit ripple is maximum when duty cycle is

Description : In dc choppers per unit ripple is maximum when duty cycle is   (a) 0.2 (b) 0.5 (c) 0.7 (d) 0.9

Last Answer : In dc choppers per unit ripple is maximum when duty cycle is 0.5 

_______ describes the position of the waveform relative to time 0. A) Frequency B) Phase C) Amplitude D) Voltage

Description : _______ describes the position of the waveform relative to time 0. A) Frequency B) Phase C) Amplitude D) Voltage

Last Answer : Phase

The output waveform produced due to time base generator in a CRO is a) saw tooth b) sinusoidal c) linear d) helical

Description : The output waveform produced due to time base generator in a CRO is a) saw tooth b) sinusoidal c) linear d) helical

Last Answer : a) saw tooth

Draw block diagram of Dual slope integrating voltmeter and also draw waveform for voltage V/s time.

Description : Draw block diagram of Dual slope integrating voltmeter and also draw waveform for voltage V/s time. 

Last Answer : Block diagram

Draw amplitude modulated waveform in time domain and frequency domain with proper labeling.

Description : Draw amplitude modulated waveform in time domain and frequency domain with proper labeling.

Last Answer : AM in Time domain  AM in frequency domain

Justify the need of current time base generator to obtain the specified sawtooth waveform with one example.

Description : Justify the need of current time base generator to obtain the specified sawtooth waveform with one example.

Last Answer : Justification:- * Current Time base generator is a circuit where the output current is a linear function of time over a specified time interval. * Time base circuits are used by radar systems to determine ... the time. * The diode D does not conduct during the sweep, because it is reverse biased.

The quality of sound depends upon its (a) Waveform (b) Frequency (c) Loudness (d) Pitch

Description : The quality of sound depends upon its (a) Waveform (b) Frequency (c) Loudness (d) Pitch

Last Answer : Ans:(a)