ed planting is practiced for row crops in (a) Semi-arid conditions to place seed deep in moist soil (b) High rainfall areas to improve surface drainage (c) Irrigated areas leaving more space for operation of equipments (d) Both (b) and (c)

ed planting is practiced for row crops in
(a) Semi-arid conditions to place seed deep in moist soil
(b) High rainfall areas to improve surface drainage
(c) Irrigated areas leaving more space for operation of equipments
(d) Both (b) and (c)
by

1 Answer

Answer :

d) Both (b) and (c)
by

Related questions

Lister planting or furrow planting is practiced for (a) High rainfall areas to improve surface drainage (b) Semi-arid conditions to place seed deep in moist soil (c) Areas where natural moisture conditions are favourable (d) Irrigated areas leaving more space for operation of equipments

Description : Lister planting or furrow planting is practiced for (a) High rainfall areas to improve surface drainage (b) Semi-arid conditions to place seed deep in moist soil (c) Areas where natural moisture conditions are favourable (d) Irrigated areas leaving more space for operation of equipments

Last Answer : (b) Semi-arid conditions to place seed deep in moist soil

Flat planting predominates where a) Nature moisture content is favourable b) Rainfall is high to provide surface drainage c) Semi arid areas to conserve moisture d) None of the above

Description : Flat planting predominates where a) Nature moisture content is favourable b) Rainfall is high to provide surface drainage c) Semi arid areas to conserve moisture d) None of the above

Last Answer : a) Nature moisture content is favourable

Give one geographical reason for each of the following : 1. Sprinkler irrigation is practiced in arid and semi-arid regions. -Geography

Description : Give one geographical reason for each of the following : 1. Sprinkler irrigation is practiced in arid and semi-arid regions. -Geography

Last Answer : 1. To minimize the loss of water. 2. So that there is demand for irrigation and the cost involved in the construction and operation of the tube well can be recovered by the increased farm ... so digging is easy Deep fertile soil which helps in recovering the cost of construction of canals.

Match the following: List-I List-II (Crops) (Geographical conditions) A. Barley 1. Hot and dry climate with poor soil B. Rice 2. Cool climate with poorer soil C. Millets 3. Warm and moist climate with high altitude D. Tea 4. Hot and moist climate with rich soil Codes: A B C D (a) 2 4 1 3 (b) 3 4 1 2 (c) 2 1 4 3 (d) 3 2 4 1

Description : Match the following: List-I List-II (Crops) (Geographical conditions) A. Barley 1. Hot and dry climate with poor soil B. Rice 2. Cool climate with poorer soil C. Millets 3. Warm and moist climate with high altitude D. Tea 4. Hot and moist ... C D (a) 2 4 1 3 (b) 3 4 1 2 (c) 2 1 4 3 (d) 3 2 4 1

Last Answer : Ans: (a)

Match the following [IAS 1997] Crops Geographical conditions A. Barley 1. Hot and dry climate with poor soil B. Rice 2. Cool climate with poorer soil C. Millets 3. Warm and Moist climate with high altitude D. Tea 4. Hot and Moist climate with rich soil A B C D (a) 2 4 1 3 (b) 3 4 1 2 (c) 2 1 4 3 (d) 3 2 4 1

Description : Match the following [IAS 1997] Crops Geographical conditions A. Barley 1. Hot and dry climate with poor soil B. Rice 2. Cool climate with poorer soil C. Millets 3. Warm and Moist climate with high altitude D. Tea 4. Hot and Moist climate with ... D (a) 2 4 1 3 (b) 3 4 1 2 (c) 2 1 4 3 (d) 3 2 4 1

Last Answer : Ans: (a)

An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of operation is 2.0kmph, the area covered (ha), in 8-11day is given by: A. 1.85/1000k B. 28.8 x 10-2k C. k/6.56 D. 1.762k

Description : An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of operation is 2.0kmph, the area covered (ha), in 8-11day is given by: A. 1.85/1000k B. 28.8 x 10-2k C. k/6.56 D. 1.762k

Last Answer : B. 28.8 x 10-2k

An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of the operation is 2.0kmph then the area covered (ha), in 8 hr day is given by: a) 1.85/1000k b) 28.8 * 10-2k c) k/6.456 d) 1.762k

Description : An animal drawn seed drill has k number of furrow openers 180mm apart. If the speed of the operation is 2.0kmph then the area covered (ha), in 8 hr day is given by: a) 1.85/1000k b) 28.8 * 10-2k c) k/6.456 d) 1.762k

Last Answer : b) 28.8 * 10-2k

Which of the following crops are grown mainly in the irrigated areas during Zaid ? [UP PCS 2011] (a) Arhar and Gram (b) Moong and Urad (c) Riceand Millets (d) Maize and Groundnut

Description : Which of the following crops are grown mainly in the irrigated areas during Zaid ? [UP PCS 2011] (a) Arhar and Gram (b) Moong and Urad (c) Riceand Millets (d) Maize and Groundnut

Last Answer : Ans: (b)

Which one of the following is not a mandate crop of The International Crops Research Institute for the Semi-Arid Tropics (ICRISAT)? A. Green Gram B. Finger Millet C. Pigeon Pea D. Sorghum

Description : Which one of the following is not a mandate crop of The International Crops Research Institute for the Semi-Arid Tropics (ICRISAT)? A. Green Gram B. Finger Millet C. Pigeon Pea D. Sorghum

Last Answer : B. Finger Millet

Where in India is International Crops Research Institute for the Semi-Arid Tropics (ICRISAT) located? a. A Hyderabad b. B Nagpur c. C Jodhpur d. D Bengaluru

Description : Where in India is International Crops Research Institute for the Semi-Arid Tropics (ICRISAT) located? a. A Hyderabad b. B Nagpur c. C Jodhpur d. D Bengaluru

Last Answer : a. A Hyderabad

Where in India is International Crops Research Institute for the Semi-Arid Tropics (ICRISAT) located? a. A Hyderabad b. B Nagpur c. C Jodhpur d. D Bengaluru

Description : Where in India is International Crops Research Institute for the Semi-Arid Tropics (ICRISAT) located? a. A Hyderabad b. B Nagpur c. C Jodhpur d. D Bengaluru

Last Answer : a. A Hyderabad

Select the High Yielding Varieties of seed-crops developed under Green Revolution in India. (1) Rice, Wheat, Pulses, Oil seeds and Sugarcane (2) Maize, Black-gram, Jowar, Coffee arid Tea (3) Rice, Wheat, Jowar, Bajra, and Maize (4) Wheat, Rice, Sugarcane, Pulses and Maize

Description : Select the High Yielding Varieties of seed-crops developed under Green Revolution in India. (1) Rice, Wheat, Pulses, Oil seeds and Sugarcane (2) Maize, Black-gram, Jowar, Coffee arid Tea (3) Rice, Wheat, Jowar, Bajra, and Maize (4) Wheat, Rice, Sugarcane, Pulses and Maize

Last Answer : (1) Rice, Wheat, Pulses, Oil seeds and Sugarcane Explanation: The growth rates of area, production and yield of food grains in India can be divided into two broad periods the period ... Varieties of wheat, rice, pulses, oilseeds and sugarcane were development under Green Revolution in India.

Select the High Yielding Varieties of seed-crops developed under Green Revolution in India. (1) Rice, Wheat, Pulses, Oil seeds and Sugarcane (2) Maize, Black-gram, Jowar, Coffee arid Tea (3) Rice, Wheat, Jowar, Bajra and Maize (4) Wheat, Rice, Sugarcane, Pulses and Maize

Description : Select the High Yielding Varieties of seed-crops developed under Green Revolution in India. (1) Rice, Wheat, Pulses, Oil seeds and Sugarcane (2) Maize, Black-gram, Jowar, Coffee arid Tea (3) Rice, Wheat, Jowar, Bajra and Maize (4) Wheat, Rice, Sugarcane, Pulses and Maize

Last Answer : Rice, Wheat, Pulses, Oil seeds and Sugarcane

Salinization occurs when the irrigation water accumulated in the soil evaporates, leaving behind salts and minerals. What are the effects of salinization on the irrigated land? [CSAT 2011] (a) It greatly increases the crop production (b) It makes some soils impermeable (c) It raises the water table (d) It fills the air spaces in the soil with water

Description : Salinization occurs when the irrigation water accumulated in the soil evaporates, leaving behind salts and minerals. What are the effects of salinization on the irrigated land? [CSAT 2011] (a) It greatly increases ... c) It raises the water table (d) It fills the air spaces in the soil with water

Last Answer : Ans: (b)

Salinization occurs when the irrigation water accumulated in the soil evaporates, leaving behind salts and minerals. What are the effects of salinization on the irrigated land? a. It greatly increases the crop production b. It may lead to crop yield loss c. It raises the water table d. It fills the air spaces in the soil with water

Description : Salinization occurs when the irrigation water accumulated in the soil evaporates, leaving behind salts and minerals. What are the effects of salinization on the irrigated land? a. It greatly increases the crop ... c. It raises the water table d. It fills the air spaces in the soil with water

Last Answer : b. It may lead to crop yield loss

Equipment for placing seeding in the soil called: a) Seed drill b) Seed cum fertilizer drill c) Planter d) Transplanter

Description : Equipment for placing seeding in the soil called: a) Seed drill b) Seed cum fertilizer drill c) Planter d) Transplanter

Last Answer : d) Transplanter

The ideal moisture content for the soil primary tillage operation a) Upper plastic limit of the soil b) Lower plastic limit c) Wilting Point d) All of the above

Description : The ideal moisture content for the soil primary tillage operation a) Upper plastic limit of the soil b) Lower plastic limit c) Wilting Point d) All of the above

Last Answer : a) Upper plastic limit of the soil

owest specific energy requirement for the operation of rotavator is about _______ times as great as a mould board plough working in the same soil. a) Equal b) Twice c) Three d) Four

Description : owest specific energy requirement for the operation of rotavator is about _______ times as great as a mould board plough working in the same soil. a) Equal b) Twice c) Three d) Four

Last Answer : c) Three

shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Description : shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions

Last Answer : i. Minimum tillage of trashy land at shallow depths

Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Description : Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions

Last Answer : f. Dried hard soils

Under a given set of operating conditions, the designer and operator has some control of a)Useful soil resistance b) Parasitic Force c)Draft of implement d) Pull of implement

Description : Under a given set of operating conditions, the designer and operator has some control of a)Useful soil resistance b) Parasitic Force c)Draft of implement d) Pull of implement

Last Answer : b) Parasitic Force

Sweet orange requires a. Dry and semi arid conditions b. Dry and sub humid conditions c. Wet and sub humid conditions b. Non of these

Description : Sweet orange requires a. Dry and semi arid conditions b. Dry and sub humid conditions c. Wet and sub humid conditions b. Non of these

Last Answer : Dry and sub humid conditions

Flat bat reels are widely used because :- a) This works well in lodged crop b) This is simpler and less expensive than pick up reels C) This works well in upright crops d) Both (b) and (c)

Description : Flat bat reels are widely used because :- a) This works well in lodged crop b) This is simpler and less expensive than pick up reels C) This works well in upright crops d) Both (b) and (c)

Last Answer : d) Both (b) and (c)

is a machine for placing the seeds in a continuous flow. a) Seed drill b) Transplanting c) Hill dropping d) Check row planting

Description : is a machine for placing the seeds in a continuous flow. a) Seed drill b) Transplanting c) Hill dropping d) Check row planting

Last Answer : Seed drill

In method, row to row and plant to plant distance is uniform. a) Seed dropping behind the plough b) Transplanting c) Hill dropping d) Check row planting

Description : In method, row to row and plant to plant distance is uniform. a) Seed dropping behind the plough b) Transplanting c) Hill dropping d) Check row planting

Last Answer : Check row planting

In method, seeds are dropped at fixed spacing and not in a continuous stream. a) Seed dropping behind the plough b) Transplanting c) Hill dropping d) Check row planting

Description : In method, seeds are dropped at fixed spacing and not in a continuous stream. a) Seed dropping behind the plough b) Transplanting c) Hill dropping d) Check row planting

Last Answer : Hill dropping

consists of preparing seedlings in nursery and then planting these seedlings in the prepared field. a) Seed dropping behind the plough b) Transplanting c) Hill dropping d) Check row planting

Description : consists of preparing seedlings in nursery and then planting these seedlings in the prepared field. a) Seed dropping behind the plough b) Transplanting c) Hill dropping d) Check row planting

Last Answer : Transplanting

consists of preparing seedlings in nursery and then planting these seeds in the prepared field. a) Hill dropping b) Transplanting c) Seed dropping behind the plough d) Check row planting

Description : consists of preparing seedlings in nursery and then planting these seeds in the prepared field. a) Hill dropping b) Transplanting c) Seed dropping behind the plough d) Check row planting

Last Answer : Transplanting

Scouring indicates: A. movement of soil on tool surface B. sticking of soil on tool surface C. inversion of soil D. none of the above

Description : Scouring indicates: A. movement of soil on tool surface B. sticking of soil on tool surface C. inversion of soil D. none of the above

Last Answer : A. movement of soil on tool surface

Soil acceleration increases draft because of a) Increased normal load on soil working surface b) Increased frictional resistance c) Kinetic energy imparted to the soil d) All of the above

Description : Soil acceleration increases draft because of a) Increased normal load on soil working surface b) Increased frictional resistance c) Kinetic energy imparted to the soil d) All of the above

Last Answer : d) All of the above

_________means movement of soils across a tool surface without sticking first to avoid soil build ups a) Pulverisation b) Inversion c) Scouring d) Turning

Description : _________means movement of soils across a tool surface without sticking first to avoid soil build ups a) Pulverisation b) Inversion c) Scouring d) Turning

Last Answer : c) Scouring

What is soil conservation? State a method of soil conservation in the: 1. Arid and Semi-Arid region. -Geography

Description : What is soil conservation? State a method of soil conservation in the: 1. Arid and Semi-Arid region. -Geography

Last Answer : Soil erosion is the removal of soil by the forces of nature, particularly wind and water. Soil erosion mainly takes place due to man’s activities such as deforestation, overgrazing of cattle, faulty methods of cultivation. 1. Aforestation, Restricting grazing of animals 2. Constructing dams

The following are the advantages of the modern methods of irrigation a. Large quantity of water is properly utilized b. No Soil erosion. c. Can be used in arid and semi-arid regions. d. All of the above

Description : The following are the advantages of the modern methods of irrigation a. Large quantity of water is properly utilized b. No Soil erosion. c. Can be used in arid and semi-arid regions. d. All of the above

Last Answer : d. All of the above

Nozzle spacing on boom is governed by a.) Type of spray b.) Height of crops c.) Density of crop d.) All of the above

Description : Nozzle spacing on boom is governed by a.) Type of spray b.) Height of crops c.) Density of crop d.) All of the above

Last Answer : d.) All of the above

The amount of liquid required for spraying of plantation crops is : a.) 200-400L/ha b.) 400-600L/ha c.) 600-800L/ha d.) 1000-1200L/ha

Description : The amount of liquid required for spraying of plantation crops is : a.) 200-400L/ha b.) 400-600L/ha c.) 600-800L/ha d.) 1000-1200L/ha

Last Answer : d.) 1000-1200L/ha

he amount of liquid required for ground spraying of agricultural crops is : a.) 400-600L/ha b.) 200-400L/ha c.) 1000-2000L/ha d.) 600-800L/ha

Description : he amount of liquid required for ground spraying of agricultural crops is : a.) 400-600L/ha b.) 200-400L/ha c.) 1000-2000L/ha d.) 600-800L/ha

Last Answer : a.) 400-600L/ha

Reaper is used for a.) Plowing b.) Harvesting and threshing. c.) Cutting crops. d.) Cutting and windrow.

Description : Reaper is used for a.) Plowing b.) Harvesting and threshing. c.) Cutting crops. d.) Cutting and windrow.

Last Answer : d.) Cutting and windrow.

V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Description : V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Formula for established plants to the speed sown based on the dug seed is given by A. CI= [(E×10000) /(D×W) ]×1000 B. CI=[E/(N+E) ]×100 C.Both (A) and (B) D. None of (A) and (B)

Description : Formula for established plants to the speed sown based on the dug seed is given by A. CI= [(E×10000) /(D×W) ]×1000 B. CI=[E/(N+E) ]×100 C.Both (A) and (B) D. None of (A) and (B)

Last Answer : B. CI=[E/(N+E) ]×100

Formula for established plant to the seed sown based on the delivery rate (kg/ha) is A. CI=[(E×10000) /(D×W) ]×100 B. CI=[E/(N+E) ]×100 C. Both (A) and (B) D. None of (A) and (B)

Description : Formula for established plant to the seed sown based on the delivery rate (kg/ha) is A. CI=[(E×10000) /(D×W) ]×100 B. CI=[E/(N+E) ]×100 C. Both (A) and (B) D. None of (A) and (B)

Last Answer : A. CI=[(E×10000) /(D×W) ]×100

Seed damage due to cut-off not a problem in (a) Horizontal plate metering mechanism (b) Vertical plate metering mechanism (c) Both (a) and (b) (d) Inclined plate metering mechanism

Description : Seed damage due to cut-off not a problem in (a) Horizontal plate metering mechanism (b) Vertical plate metering mechanism (c) Both (a) and (b) (d) Inclined plate metering mechanism

Last Answer : (d) Inclined plate metering mechanism

The average spacing of seeds or hills in field is obtained or determined by a) The ratio of linear or peripheral speed of seed pick up units (cells fingers, etc) to the forward speed of the planter b) The distance between the speed pick up units (cells) on the metering unit c) Both (a) and (b) d) None of the above

Description : The average spacing of seeds or hills in field is obtained or determined by a) The ratio of linear or peripheral speed of seed pick up units (cells fingers, etc) to the forward speed of the planter b) The distance ... up units (cells) on the metering unit c) Both (a) and (b) d) None of the above

Last Answer : c) Both (a) and (b)

Increasing non grain feed rate increase (a) Cylinder losses (b) Seed damage (c) Both (a) and(b) (d) None of the above

Description : Increasing non grain feed rate increase (a) Cylinder losses (b) Seed damage (c) Both (a) and(b) (d) None of the above

Last Answer : (a) Cylinder losses

Increasing non-grain feed rate increase a) Cylinder losses b) seed damage c)Both (a) and (b) d) none of the above

Description : Increasing non-grain feed rate increase a) Cylinder losses b) seed damage c)Both (a) and (b) d) none of the above

Last Answer : a) Cylinder losses

Subsoiler plough is best suited for a. breaking hard pan b. deep ploughing c. making ditches d. inter cultivation

Description : Subsoiler plough is best suited for a. breaking hard pan b. deep ploughing c. making ditches d. inter cultivation

Last Answer : a. breaking hard pan

A thresh causes more seed damage if :- a. Seed is increase b. Clearance is increased c. Feed rate is reduced d. Seed is reduced

Description : A thresh causes more seed damage if :- a. Seed is increase b. Clearance is increased c. Feed rate is reduced d. Seed is reduced

Last Answer : a. Seed is increase

knives of the cutter bar are scrratedin order to a)Increase the co-efficient of friction between crop stalk machine b)Reducing the deflection of stalk side ways c)To increase the cutting speed d)To improve cutting height

Description : knives of the cutter bar are scrratedin order to a)Increase the co-efficient of friction between crop stalk machine b)Reducing the deflection of stalk side ways c)To increase the cutting speed d)To improve cutting height

Last Answer : a)Increase the co-efficient of friction between crop stalk machine

Seed drills differ from the planters in respect of a) metering mechanism b) ground wheel design c) transmission system between ground wheel and roller wheel d) none of the above

Description : Seed drills differ from the planters in respect of a) metering mechanism b) ground wheel design c) transmission system between ground wheel and roller wheel d) none of the above

Last Answer : a) metering mechanism

n the following the precision planter is: A. seed drill B. broadcaster C. Dibbler D. dofaan

Description : n the following the precision planter is: A. seed drill B. broadcaster C. Dibbler D. dofaan

Last Answer : C. Dibble

In check rowing the seed spacing is a. constant b. continuous c. same as the rows d. none of these

Description : In check rowing the seed spacing is a. constant b. continuous c. same as the rows d. none of these

Last Answer : c. same as the rows