Description : power of absorbing type hydraulic dynamometer varies as a) cube of rpm b) fifth power of the diameter c) none of the above d) both (a) and (b)
Last Answer : d) both (a) and (b)
Description : Soil strength is determined by: A. penetrometer B. micrometer C. hydrometer D. dynamometer
Last Answer : D. dynamometer
Description : In sprayers , operating pressures below ___________Kpa are undesirable for hydraulic nozzles other than flooding type
Last Answer : 140
Description : .In Hydraulic sprayers, the degree of atomization is primarily a function of A. Liquid pressure and the nozzle characteristics B. Air velocity C. Size of the nozzle D. Size and shape of the atomizer
Last Answer : A. Liquid pressure and the nozzle characteristics
Description : In hydraulic sprayers, the degree is primarily a function of: a) Liquid pressure and the nozzle characteristics b) Air velocity c) Size of the nozzle d) Shape and size of the atomizer
Last Answer : a) Liquid pressure and the nozzle characteristics
Description : Rated speed of an engine is the speed at which an engine devlopes (A) Maximum crankshaft torque (B) Maximum brake horse power output (C) Maximum thermal efficiency (D) Maximum drawback pull
Last Answer : (B) Maximum brake horse power output
Description : One of the main advantages of disc brakes over drum brakes is that the disc brake : U. Can stop a vehicle in a shorter distance V. Is more heat resistant W. Weighs less than drum brakes X. Requires less pedal force to stop the vehicle
Last Answer : . Requires less pedal force to stop the vehicle
Description : Explain the working principle of the following dynamometers with suitable sketches, if necessary: (i) Hydraulic Dynamometer. (ii) Eddy Current Dynamometer.
Last Answer : (i) Hydraulic Dynamometer: In principle, hydraulic dynamometer construction is similar to that of a fluid flywheel. Hydraulic dynamometer consists of an impeller or inner rotating member coupled to the output shaft ... Eddy current oppose the rotor motion thus loading the engine.
Description : The draft of a trailed type implement can be measured using a) Brake dynamometer b) Torque meter c) Tension dynamometer d) Dial gauge Ans. c
Last Answer : Ans. c
Description : Seed drills differ from the planters in respect of a) metering mechanism b) ground wheel design c) transmission system between ground wheel and roller wheel d) none of the above
Last Answer : a) metering mechanism
Description : What is the value for centrifugal torque for maximum power transmission in belt drives a) ½ maximum torque b) 2/3 maximum torque c) ¾ maximum torque d) None of the above
Last Answer : d) None of the above
Description : Planters differ from a seed drill in respect of- (A) kind of power transmission system (B)kind of metering mechanism (C)kind of furrow opener used (D)all of the above
Last Answer : (B)kind of metering mechanism
Description : Gears are generally used in the transmission box are ∙ spur gear only ∙ helical gear only ∙ helical and spur gear gears ∙ bevel gears
Last Answer : ∙ helical gear only
Description : V-belt drive transmission system is used when it is designed to achieve a) High speed ratio b) Space requirements are limited c) Both (a) and (b) d) None of the above
Last Answer : c) Both (a) and (b)
Description : What is the difference between hydraulic oil and brake oil?
Last Answer : What is the answer ?
Description : The hydraulic brake used in automobiles is a direct application of - (1) Archimedes principle (2) Torricellean law (3) Bernoulli's Theorem (4) Pascal's law
Last Answer : (4) Pascal's law Explanation: Pascal's law basically states that any pressure applied to a fluid inside a closed system will transmit that pressure equally in all directions throughout the fluid.
Description : Which hydraulic system supplies brake pressure?
Last Answer : The green system pressurized the normal braking system while the yellow hydraulic system provides hydraulic pressure for alternate braking and parking brake.
Description : Hydraulic Brake
Last Answer : Another popular type of braking devices is the hydraulic brake. This brake arrangement uses brake fluid to transfer pressure to the actual brake mechanism from the controlling unit. The actual brake mechanism ... causes a braking torque to be generated. This makes the vehicle slow down or stop.
Description : verticalsuctioninmouldboardploughis______whereashorizontalsuctionis______
Last Answer : .0.3to0.5cm,0.5cm
Description : Byincreasingdiskangle,depthpenetration_____beoverwithofcut_______
Last Answer : .decreases,increases
Description : A paddy transplanter uses either root wash type seedlings or __________ seedlings.
Last Answer : soil bearing
Description : An indigenous plough cuts a _________furrow cross sect
Last Answer : Trapizoidal
Description : The unit of filter medium resistance is________
Last Answer : L^-1
Description : The average working speed of a hand operated chaff fitted with two knives is _________ rev/min.
Last Answer : 35
Description : In a combine harvester the peripheral speed of the cylinder ranges between ________ m/min.
Last Answer : 1200 to 1500
Description : Optimum speed for grains like gram,pea,etc.,thresher using power is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : a) 300-400rpm
Description : Optimum operating cylinder speed for wheat threshing using power operated thresher is a) 300-400rpm b) 400-600rpm c) 600-800rpm d) 1100-1200rpm
Last Answer : d) 1100-1200rpm
Description : Optimum operating cylinder speed for the power operated maize sheller is a) 200-400rpm b) 400-600rpm c) 600-800rpm d) 1000-1200rpm
Last Answer : c) 600-800rpm
Description : Air output of a duster is given by formula a) Q= 60×A×V b)Q= 60×A×(2GH/Y) c) Q= 240×A×h d) all of the above
Last Answer : d) all of the above
Description : Lewis formula is used in the design of a) gears b) clutch c) chain drive d) belt drives
Last Answer : a) gears
Description : Transplanter using soil bearing seedlings are more popular than washed root seedling transplanter because of a) less labour requirement b) lesser plant missing percentage c) higher work rates d) all of the above
Description : Superchargers are driven by A. Electric current from the battery B. Exhaust gases from engine C. Direct connection with the engine power D. None of the above
Last Answer : C. Direct connection with the engine power
Description : Turbo chargers are driven by A. Direct connection with engine power B. Exhaust gases from engine C. Electric current from the battery D. None of the above
Last Answer : B. Exhaust gases from engine
Description : Turbo chargers or super chargers increases engine power by A. 10-20% C. 50-60% B. 20-30% D. 90-100%
Last Answer : A. 10-20%
Description : .When the valves are carried in engine bioel at one side of each cylinder is called A. Valves in head arrangements B. L-head C. I-head D. None of the above
Last Answer : B. L-head
Description : Utility index is a indication of A. Work machine contact hours B. Wear out life of machine C. Operating cost of machine D. Reliability of machine working
Last Answer : A. Work machine contact hours
Description : Alternators are preferred over dynamo because A. Alternators can produce a strong current of 30-40 amperes. B. Alternators don’t required cutout reiny C. Alternators don’t have commutaters D. All of the above
Last Answer : D. All of the above
Description : main function of the current regulator is A. To prevent the reversal flow of current from the battery when dynamo speed is drops. B. To safeguard against flow of high currents to battery when armature develops ... . C. To prevent building up of high voltage in a circuit. D. None of the above
Last Answer : B. To safeguard against flow of high currents to battery when armature develops more current.
Description : Main function of cutout relay in electrical circuit is A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces. B. To restrict the maximum output at ... deliver current to the battery or to the lightening and ignition circuit. D. None of the above
Last Answer : A. To prevent the reversal of current flow from the battery when dynamo speed (engine speed) reduces.
Description : Weight per unit of drawbar power is generally ranges between a)50-120kg/kw b)120-150kg/kw c)150-250kg/kw d)250-300kg/kw
Last Answer : a)50-120kg/kw
Description : .Fandem wheels are preferred over dual wheels because a) they tends to reduce load on an area by50% b)they tends to reduce soil contact pressure c)reduces sub soil compact ness pressure d)none of the above
Last Answer : a) they tends to reduce load on an area by50%
Description : Dual wheels have disadvantage of a)reducing soil contact pressure and sub soil compact negative pressure b) concentrating load over an area c)reduces load on area by 50% d) none of the above
Last Answer : b) concentrating load over an area
Description : Suggested or recommended difference in mass to power ratio between ballasted and unballasted tractor is of the order a)10kg/PTO KW b)6kg/PTO kw c)20kg/PTO kw d)30kg/PTO kw
Last Answer : b)6kg/PTO kw
Description : Formula for adding weight (ballast) on tractor tyres working in loose wet soil for good traction a)(km/hr × kg/PTO kw)=540 b)( km/hr × kg/PTO kw)=670 c)( km/hr × kg/PTO HP)=540 d)( km/hr × kg/PTO HP)=670
Last Answer : a)(km/hr × kg/PTO kw)=540
Description : Optimum operating speed of rotavator is a)20-150rpm b)150-350rpm c)350-500rpm d) >500rpm
Last Answer : d) >500rpm
Description : For optimum working the slip should not exceed a) 15% b) 20% c) 25% d) 30%
Last Answer : a) 15%
Description : Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed
Last Answer : p. For operating on the sides of plant bed
Description : shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions
Last Answer : i. Minimum tillage of trashy land at shallow depths
Description : Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions
Last Answer : f. Dried hard soils
Description : Total mechanical losses ( frictional losses , pumping loss in intake and exhaust and power accessories) will amount to a.10-20 % ihp b.2-10 % ihp c.20-30 % ihp d.30 -50 % ihp
Last Answer : a.10-20 % ihp