The Complement Accumulator (CMA) instruction of 8085 processor on execution affects...

The Complement Accumulator (CMA) instruction of 8085 processor on execution affects a. Zero Flag b. Sign Flag c. Carry Flag d. None of the flags
by

1 Answer

Answer :

B


by

Related questions

The contents of accumulator before CMA instruction is A5H. Its content after instructionexecution isa) A5H b) 5AH

Description : The contents of accumulator before CMA instruction is A5H. Its content after instructionexecution isa) A5H b) 5AH

Last Answer : b) 5AH

The content of the accumulator after the execution of the following 8085 assembly language program, is: MVI A, 42H MVI B, 05H UGC: ADD B DCR B JNZ UGC ADI 25H HLT (A) 82 H (B) 78 H (C) 76 H (D) 47 H

Description : The content of the accumulator after the execution of the following 8085 assembly language program, is: MVI A, 42H  MVI B, 05H UGC: ADD B DCR B JNZ UGC ADI 25H HLT (A) 82 H (B) 78 H (C) 76 H (D) 47 H

Last Answer : (C) 76 H

The content of the accumulator after the execution of the following 8085 assembly language program, is MVI A, 35H MOV B, A STC CMC RAR XRA B (A) 00H (B) 35H (C) EFH (D) 2FH

Description : The content of the accumulator after the execution of the following 8085 assembly language program, is MVI A, 35H MOV B, A STC CMC RAR XRA B (A) 00H (B) 35H (C) EFH (D) 2FH

Last Answer : (D) 2FH

In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Description : In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Last Answer : (A) set, reset

A single instruction to clear the lower four bits of the accumulator I 8085 assembly language is:

Last Answer : A single instruction to clear the lower four bits of the accumulator I 8085 assembly language is: ANI FOH

If initial content of accumulator is 44 H, find out the new content of accumulator after execution of the instruction RR A

Description : If initial content of accumulator is 44 H, find out the new content of accumulator after execution of the instruction RR A

Last Answer : Contents of Acc will be 22H ( as RR A divides acc by 2)

In an 8085 microprocessor, the contents of accumulator, after the following instructions are

Description : In an 8085 microprocessor, the contents of accumulator, after the following instructions are executed will become   XRA A   MVI B F0H   SUB B   (a) 01 H (b) 0F H (c) F0 H (d) 10 H

Last Answer : In an 8085 microprocessor, the contents of accumulator, after the following instructions are executed will become   XRA A   MVI B F0H   SUB B   (a) 01 H (b) 0F H (c) F0 H (d) 10 H

The load instruction is mostly used to designate a transfer from memory to a processor register known as_________ A. Accumulator B. Instruction Register C. Program counter D. Memory address Register

Description : The load instruction is mostly used to designate a transfer from memory to a processor register known as_________ A. Accumulator B. Instruction Register C. Program counter D. Memory address Register

Last Answer : A. Accumulator

In an 8085 microprocessor, after the execution of XRA A instruction

Description : In an 8085 microprocessor, after the execution of XRA A instruction A) the carry flag is set B) the accumulator contains FFH C) the zero flag is set D) the accumulator contents are shifted left by one bit

Last Answer :  In an 8085 microprocessor, after the execution of XRA A instruction the zero flag is set 

Which flag does not change by the execution of the instruction DCR B in 8085 microprocessor ?

Description : Which flag does not change by the execution of the instruction DCR B in 8085 microprocessor ?  (a) Parity (b) Carry (c) Zero (d) Sign

Last Answer : Which flag does not change by the execution of the instruction DCR B in 8085 microprocessor ?  (a) Parity (b) Carry (c) Zero (d) Sign

The stack pointer in the 8085 microprocessor is a: a) 16 bit register that points to stack memory locations b) 16 bit accumulator c) Memory location in the stack d) None of The Above

Description : The stack pointer in the 8085 microprocessor is a: a) 16 bit register that points to stack memory locations b) 16 bit accumulator c) Memory location in the stack d) None of The Above

Last Answer : a) 16 bit register that points to stack memory locations

Accumulator based microprocessor example are: a. Intel 8085 b. Motorola 6809 c. A and B d. None of these

Description : Accumulator based microprocessor example are: a. Intel 8085 b. Motorola 6809 c. A and B d. None of these

Last Answer : c. A and B

Describe Briefly The Accumulator Register Of 8085.?

Description : Describe Briefly The Accumulator Register Of 8085.?

Last Answer : Answer :It is one of the most important 8 bit register of 8085 It is responsible for coordinating input and output to and from the microprocessor through it. The primary purpose of ... logical operations. This accumulator register is mainly used for arithmetic, logical, store and rotate operations.

In an 8085 microprocessor, the contents of the Accumulator, after the following instructions are executed

Description : In an 8085 microprocessor, the contents of the Accumulator, after the following instructions are executed will become   XRA A   MVI B, F0 H   SUB B  (A) 01 H (B) 0F H (C) F0 H (D) 10 H

Last Answer : In an 8085 microprocessor, the contents of the Accumulator, after the following instructions are executed will become   XRA A   MVI B, F0 H   SUB B  (A) 01 H (B) 0F H (C) F0 H (D) 10 H

The zero flag of 8085 microprocessor is to be set keeping the content of the accumulator unchanged.

Description : The zero flag of 8085 microprocessor is to be set keeping the content of the accumulator unchanged. Which instruction is to be used?  (a) MOV A,A (b) ANI 00H (c) XRA A (d) CMP A

Last Answer : The zero flag of 8085 microprocessor is to be set keeping the content of the accumulator unchanged. Which instruction is to be used?  (a) MOV A,A (b) ANI 00H (c) XRA A (d) CMP A

Actual data processing operations are performed in the arithmetic logic section, but not in the “. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Description : Actual data processing operations are performed in the arithmetic logic section, but not in the “. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Last Answer : Primary

Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Description : Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Last Answer : a. Primary

Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Description : Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Last Answer : a. Primary

In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine

Description : In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine on address A) 0000 H B) 002C H C) 0024 H D) 0004 H

Last Answer : In 8085, whenever a signal is received at TRAP terminal, its program execution is transferred to a subroutine on address 0024 H

In 8085 microprocessor, the value of the most significant bit of the result following the execution of any

Description : In 8085 microprocessor, the value of the most significant bit of the result following the execution of any arithmetic of Boolean instruction is stored in the (1) Carry status flag (2) Auxiliary carry status flag (3) Sign status flag (4) Zero status flag

Last Answer : In 8085 microprocessor, the value of the most significant bit of the result following the execution of any arithmetic of Boolean instruction is stored in the Sign status flag

What the Difference between accumulator and instruction register 8080?

Description : What the Difference between accumulator and instruction register 8080?

Last Answer : Examples: /360: no accumulator 8080: A 6800: A and B 8086: AX ...

The ___________ contains the address of the next instruction to be executed. a) IR b) PC c) Accumulator d) System counter

Description : The ___________ contains the address of the next instruction to be executed. a) IR b) PC c) Accumulator d) System counter

Last Answer : Answer: b Explanation: PC stands for program counter (It contains the address of the next instruction to be executed)

A group of bits that tell the computer to perform a specific operation is known as_______ A. Instruction code B. Micro-operation C. Accumulator D. Register

Description : A group of bits that tell the computer to perform a specific operation is known as_______ A. Instruction code B. Micro-operation C. Accumulator D. Register

Last Answer : A. Instruction code

A basic instruction that can be interpreted by computer generally has ________ A. An operand and an address B. decoder and an accumulator C. Sequence register and decoder D. None of the Above

Description : A basic instruction that can be interpreted by computer generally has ________ A. An operand and an address B. decoder and an accumulator C. Sequence register and decoder D. None of the Above

Last Answer : A. An operand and an address

In microprocessor the next instruction to be executed is stored in a) Program Counter b) Stack Pointer c) Memory Pointer d) Accumulator

Description : In microprocessor the next instruction to be executed is stored in a) Program Counter b) Stack Pointer c) Memory Pointer d) Accumulator

Last Answer : Ans: Program Counter

When a subroutine is called, the address of the instruction following the CALL instructions stored in/on the a. stack pointer b. accumulator c. program counter d. stack

Description : When a subroutine is called, the address of the instruction following the CALL instructions stored in/on the a. stack pointer b. accumulator c. program counter d. stack

Last Answer : d. stack

What is the Result of RR A instruction if accumulator contains 1000 0000. a) 0000 0001 b) 0000 0000 c) 0100 0000 d) 0000 0010

Description : What is the Result of RR A instruction if accumulator contains 1000 0000. a) 0000 0001 b) 0000 0000 c) 0100 0000 d) 0000 0010

Last Answer : a) 0000 0001

Which of the following instruction perform the move accumulator to external RAM of 16bit address? a) MOV @ DPTR, A b) MOVX @ Ri, A c) MOV A, @ Ri d) MOVX @ DPTR, A

Description : Which of the following instruction perform the move accumulator to external RAM of 16bit address? a) MOV @ DPTR, A b) MOVX @ Ri, A c) MOV A, @ Ri d) MOVX @ DPTR, A

Last Answer : c) MOV A, @ Ri

Which of the following instruction perform as of indirect RAM to accumulator? a) MOV A, Rn b) MOV @Ri, A c) MOV A, @Ri d) MOV Rn, A

Description : Which of the following instruction perform as of indirect RAM to accumulator? a) MOV A, Rn b) MOV @Ri, A c) MOV A, @Ri d) MOV Rn, A

Last Answer : c) MOV A, @Ri

The act of writing new data into register (1) is possible only when the register is an accumulator (2) is possible only when the register is an accumulator or instruction register (3) erases the previous contents of the register (4) is non-destructive to existing contents

Description : The act of writing new data into register (1) is possible only when the register is an accumulator (2) is possible only when the register is an accumulator or instruction register (3) erases the previous contents of the register (4) is non-destructive to existing contents

Last Answer :  is possible only when the register is an accumulator or instruction register

Which are some of popular processor: a. Motorola 6800 and 6809 b. Intel 8085 c. Zilog Z80 d. All the above

Description : Which are some of popular processor: a. Motorola 6800 and 6809 b. Intel 8085 c. Zilog Z80 d. All the above

Last Answer : d. All the above

Why 8085 processor is called an 8 bit processor? a) Because 8085 processor has 8 bit ALU. b) Because 8085 processor has 8 bit data bus. c) a & b. Why 8085 processor is called an 8 bit processor? a) Because 8085 processor has 8 bit ALU. b) Because 8085 processor has 8 bit data bus. c) a & b.

Description : Why 8085 processor is called an 8 bit processor? a) Because 8085 processor has 8 bit ALU. b) Because 8085 processor has 8 bit data bus. c) a & b.

Last Answer : a) Because 8085 processor has 8 bit ALU.

How expensive is it to be CMA certified ?

Description : How expensive is it to be CMA certified ?

Last Answer : There is more than 1 test you need to complete for your CMA. Because of this, they cost a little over $1,000.

How many operations are there in the instruction set of 8085 microprocessor?

Description : How many operations are there in the instruction set of 8085 microprocessor?

Last Answer : There are 74 operations in the 8085 microprocessor.

How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second

Description : How many speed of 8088,8085,8086 microprocessor: a. 2.5 Million instruction per second b. 1.5 Million instruction per second c. 3.5 Million instruction per second d. 1.6 Million instruction per second

Last Answer : a. 2.5 Million instruction per second

8253, 8257 c) 8257,8251 d)8251,825721.Consider the following set of 8085 instruction.MVI A,82HORA AJP DSPLYXRA ADSPLY:OUT PORT1HLT.The output at PORT1 isa) 00H b) FFH c) 92H d) 11H

Description : 8253, 8257 c) 8257,8251 d)8251,825721.Consider the following set of 8085 instruction.MVI A,82HORA AJP DSPLYXRA ADSPLY:OUT PORT1HLT.The output at PORT1 isa) 00H b) FFH c) 92H d) 11H

Last Answer : a) 00H

The RST 7 instruction in 8085 microprocessor is equivalent to: (A) CALL 0010 H (B) CALL 0034 H (C) CALL 0038 H (D) CALL 003C H

Description : The RST 7 instruction in 8085 microprocessor is equivalent to: (A) CALL 0010 H (B) CALL 0034 H (C) CALL 0038 H (D) CALL 003C H

Last Answer : (C) CALL 0038 H

The contents of Register (BL) and Register (AL) of 8085 microprocessor are 49H and 3AH respectively. The contents of AL, the status of carry flag (CF) and sign flag (SF) after executing 'SUB AL, BL' assembly language instruction, are (1) AL=0FH; CF=1; SF=1 (2) AL=F0H; CF=0; SF=0 (3) AL=F1H; CF=1; SF=1 (4) AL=1FH; CF=1; SF=1

Description : The contents of Register (BL) and Register (AL) of 8085 microprocessor are 49H and 3AH respectively. The contents of AL, the status of carry flag (CF) and sign flag (SF) after executing 'SUB AL, BL' assembly language instruction, are ( ... ; CF=0; SF=0 (3) AL=F1H; CF=1; SF=1 (4) AL=1FH; CF=1; SF=1

Last Answer : Answer: 3

Then number of T-states of the instruction STA in 8085 microprocessor is

Description : Then number of T-states of the instruction STA in 8085 microprocessor is A) 10 B) 12 C) 13 D) 16 

Last Answer : Then number of T-states of the instruction STA in 8085 microprocessor is 13 

Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a system, rather than serving as a main processor itself. iii) Because main Microprocessor handles the general program execution and the 8087 handles specialized math computations. a) i & iii b) ii & iii c) iii only. d) i only.

Description : Why 8087 is referred to as Coprocessor? i) Because 8087 is used in parallel with main processor in a system, rather than serving as a main processor itself. ii) Because 8087 is used in serial with main processor in a ... math computations. a) i & iii b) ii & iii c) iii only. d) i only.

Last Answer : c) iii only.

________ is a program that places programs into memory and prepares them for execution. (1) Assembler (2) Compiler (3) Loader (4) Macro processor

Description :  ________ is a program that places programs into memory and prepares them for execution. (1) Assembler (2) Compiler (3) Loader (4) Macro processor

Last Answer : Loader

A compiler is a translating program which A) Translates instruction of a high level language into machine language B) Translates entire source program into machine language program C) It is not involved in program’s execution D) All of above

Description : A compiler is a translating program which A) Translates instruction of a high level language into machine language B) Translates entire source program into machine language program C) It is not involved in program’s execution D) All of above

Last Answer : Answer : D

What do you call a program in execution? a) Command b) Process c) Task d) Instruction

Description : What do you call a program in execution? a) Command b) Process c) Task d) Instruction

Last Answer : Answer: b Explanation: Option Process is correct. A program is a set of instructions. A program in execution is called a process

Which is the method by which instructions are selected for execution: a. Instruction selection b. — Selection control c. Instraction sequencing d. All of these

Description : Which is the method by which instructions are selected for execution: a. Instruction selection b. — Selection control c. Instraction sequencing d. All of these

Last Answer : c. Instraction sequencing

The simplest method of controlling sequence of instruction execution is to have each instruction explicitly specify: a. The address of next instruction to be run b. Address of previous instruction c. Both a &b d. None of these

Description : The simplest method of controlling sequence of instruction execution is to have each instruction explicitly specify: a. The address of next instruction to be run b. Address of previous instruction c. Both a &b d. None of these

Last Answer : a. The address of next instruction to be run

The time required to complete one instruction is called. a. Fetch time b. Execution time c. Control time d. All of these

Description : The time required to complete one instruction is called. a. Fetch time b. Execution time c. Control time d. All of these

Last Answer : b. Execution time

Execution of instruction specified by instruction to perform: a. Operation b. Operands c. Both a &b d. None of these

Description : Execution of instruction specified by instruction to perform: a. Operation b. Operands c. Both a &b d. None of these

Last Answer : a. Operation

Which unit is necessary for the execution of instruction: a. Timing b. Control ce. Both d. None of these

Description : Which unit is necessary for the execution of instruction: a. Timing b. Control ce. Both d. None of these

Last Answer : ce. Both

When subroutine is called contents of program counter is location address of __ instruction following call instruction is stored on _ __and program execution is transferred to __ address. a. Non executable, pointer and subroutine b. Executable, Stack and Main program Cc. Executable, Queue and Subroutine d. Executable, Stack and Subroutine

Description : When subroutine is called contents of program counter is location address of __ instruction following call instruction is stored on _ __and program execution is transferred to __ address. a. Non ... , Stack and Main program Cc. Executable, Queue and Subroutine d. Executable, Stack and Subroutine

Last Answer : d. Executable, Stack and Subroutine

Which of the following 2 task are performed to execute an instruction by MCU: a. Microinstruction execution b. Microinstruction sequencing c. Botha&b d. None of these

Description : Which of the following 2 task are performed to execute an instruction by MCU: a. Microinstruction execution b. Microinstruction sequencing c. Botha&b d. None of these

Last Answer : c. Botha&b