The stack pointer in the 8085 microprocessor is a: a) 16 bit register that points to stack memory locations b) 16 bit accumulator c) Memory location in the stack d) None of The Above

The stack pointer in the 8085 microprocessor is a:
a) 16 bit register that points to stack memory locations
b) 16 bit accumulator
c) Memory location in the stack
d) None of The Above
by

1 Answer

Answer :

a) 16 bit register that points to stack memory locations
by

Related questions

A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Description : A stack pointer is a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory. b. a register that decodes and executes 16-bit arithmetic expression. c. The first memory location where a subroutine address is stored. d. a register in which flag bits are stored

Last Answer : a. a 16-bit register in the microprocessor that indicate the beginning of the stack memory.

A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Description : A stack is a. an 8-bit register in the microprocessor b. a 16-bit register in the microprocessor c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

Last Answer : c. a set of memory locations in R/WM reserved for storing information temporarily during the execution of computer

In microprocessor the next instruction to be executed is stored in a) Program Counter b) Stack Pointer c) Memory Pointer d) Accumulator

Description : In microprocessor the next instruction to be executed is stored in a) Program Counter b) Stack Pointer c) Memory Pointer d) Accumulator

Last Answer : Ans: Program Counter

In 8085 name the 16 bit registers? a) Stack pointer b) Program counter c) a & b

Description : In 8085 name the 16 bit registers? a) Stack pointer b) Program counter c) a & b

Last Answer : c) a & b

In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Description : In an 8085 microprocessor, the instruction CMP B has been executed while the contentsof accumulator is less than that of register B. As a result carry flag and zero flag will berespectively (A) set, reset (B) reset, set (C) reset, reset (D) set, set

Last Answer : (A) set, reset

What is the name of a memory buffer used to accommodate a speed differential ? (1) Cache (2) Stack Pointer (3) Accumulator (4) Disc

Description : What is the name of a memory buffer used to accommodate a speed differential ? (1) Cache (2) Stack Pointer (3) Accumulator (4) Disc

Last Answer : Cache

When the RET instruction at the end of subroutine is executed, a. the information where the stack is iniatialized is transferred to the stack pointer b. the memory address of the RET instruction is transferred to the program counter c. two data bytes stored in the top two locations of the stack are transferred to the program counter d. two data bytes stored in the top two locations of the stack are transferred to the stack pointer

Description : When the RET instruction at the end of subroutine is executed, a. the information where the stack is iniatialized is transferred to the stack pointer b. the memory address of the RET instruction is ... two data bytes stored in the top two locations of the stack are transferred to the stack pointer

Last Answer : c. two data bytes stored in the top two locations of the stack are transferred to the program counter

The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Description : The microprocessor can read/write 16 bit data from or to ________ A. memory B. I /O device C. processor D. register

Last Answer : The microprocessor can read/write 16 bit data from or to memory 

In stack organization address register is known as the: a. Memory stack b. Stack pointer c. Push operation d. Pop operation

Description : In stack organization address register is known as the: a. Memory stack b. Stack pointer c. Push operation d. Pop operation

Last Answer : b. Stack pointer

When a subroutine is called, the address of the instruction following the CALL instructions stored in/on the a. stack pointer b. accumulator c. program counter d. stack

Description : When a subroutine is called, the address of the instruction following the CALL instructions stored in/on the a. stack pointer b. accumulator c. program counter d. stack

Last Answer : d. stack

Accumulator based microprocessor example are: a. Intel 8085 b. Motorola 6809 c. A and B d. None of these

Description : Accumulator based microprocessor example are: a. Intel 8085 b. Motorola 6809 c. A and B d. None of these

Last Answer : c. A and B

In an 8085 microprocessor, the contents of the Accumulator, after the following instructions are executed

Description : In an 8085 microprocessor, the contents of the Accumulator, after the following instructions are executed will become   XRA A   MVI B, F0 H   SUB B  (A) 01 H (B) 0F H (C) F0 H (D) 10 H

Last Answer : In an 8085 microprocessor, the contents of the Accumulator, after the following instructions are executed will become   XRA A   MVI B, F0 H   SUB B  (A) 01 H (B) 0F H (C) F0 H (D) 10 H

The zero flag of 8085 microprocessor is to be set keeping the content of the accumulator unchanged.

Description : The zero flag of 8085 microprocessor is to be set keeping the content of the accumulator unchanged. Which instruction is to be used?  (a) MOV A,A (b) ANI 00H (c) XRA A (d) CMP A

Last Answer : The zero flag of 8085 microprocessor is to be set keeping the content of the accumulator unchanged. Which instruction is to be used?  (a) MOV A,A (b) ANI 00H (c) XRA A (d) CMP A

In an 8085 microprocessor, the contents of accumulator, after the following instructions are

Description : In an 8085 microprocessor, the contents of accumulator, after the following instructions are executed will become   XRA A   MVI B F0H   SUB B   (a) 01 H (b) 0F H (c) F0 H (d) 10 H

Last Answer : In an 8085 microprocessor, the contents of accumulator, after the following instructions are executed will become   XRA A   MVI B F0H   SUB B   (a) 01 H (b) 0F H (c) F0 H (d) 10 H

Describe Briefly The Accumulator Register Of 8085.?

Description : Describe Briefly The Accumulator Register Of 8085.?

Last Answer : Answer :It is one of the most important 8 bit register of 8085 It is responsible for coordinating input and output to and from the microprocessor through it. The primary purpose of ... logical operations. This accumulator register is mainly used for arithmetic, logical, store and rotate operations.

___uses the stack to store return address of subroutine: a. CPU b. Microprocessor c. register d. memory

Description : ___uses the stack to store return address of subroutine: a. CPU b. Microprocessor c. register d. memory

Last Answer : b. Microprocessor

List the 16 – bit registers of 8085 microprocessor.

Description : List the 16 – bit registers of 8085 microprocessor.

Last Answer : Stack pointer (SP) and Program counter (PC).

Which is 16 Bit microprocessor: a. 8088 b. 8086 c. 8085 d. All of these

Description : Which is 16 Bit microprocessor: a. 8088 b. 8086 c. 8085 d. All of these

Last Answer : d. All of these

Describe the functions of stack pointer and program counter of 8085.

Description : Describe the functions of stack pointer and program counter of 8085. 

Last Answer : Stack pointer: 1. It is a 16 bit register which is used to store the address of topmost filled memory location of stack memory. 2. SP always points current top of stack. 3. If data is ... of memory and in 8085 the address of memory is 16 bit. Hence program counter is 16 bit register.

Write A Program That Will Store The Contents Of An Accumulator And Flag Register At Locations 2000h And 2001h.?

Description : Write A Program That Will Store The Contents Of An Accumulator And Flag Register At Locations 2000h And 2001h.?

Last Answer : Answer :By making use of the Push & Pop instructions the program can be written as: LXISP, 4000H - this step initiates the SP at 4000h. PUSH PSW - the contents of the accumulator and flag are pushed into the stack. POP B MOV A, B STA 2000H MOV A, C STA 2001H HLT

Which is used to store critical pieces of data during subroutines and interrupts: a. Stack b. Queue c. Accumulator d. Data register

Description : Which is used to store critical pieces of data during subroutines and interrupts: a. Stack b. Queue c. Accumulator d. Data register

Last Answer : a. Stack

Various machine level components are: a. Address register > Program counter c Data register d. Accumulator register e. Memory of 2K,16 bits/word RAM f. Multiplexers g. Allof these

Description : Various machine level components are: a. Address register > Program counter c Data register d. Accumulator register e. Memory of 2K,16 bits/word RAM f. Multiplexers g. Allof these

Last Answer : g. Allof these

In Microprocessor one of the operands holds a special register called: a. Calculator b. Dedicated c. Accumulator d. None of these

Description : In Microprocessor one of the operands holds a special register called: a. Calculator b. Dedicated c. Accumulator d. None of these

Last Answer : c. Accumulator

Main storage is also called A) Accumulator B) Control Unit C) Register Unit D) Memory

Description : Main storage is also called A) Accumulator B) Control Unit C) Register Unit D) Memory

Last Answer : Answer : D

The load instruction is mostly used to designate a transfer from memory to a processor register known as_________ A. Accumulator B. Instruction Register C. Program counter D. Memory address Register

Description : The load instruction is mostly used to designate a transfer from memory to a processor register known as_________ A. Accumulator B. Instruction Register C. Program counter D. Memory address Register

Last Answer : A. Accumulator

Opcode is the machine instruction obtained from decoding instruction stored in. a. Stack pointer b. Address pointer Cc. Instruction register d. Incrementer

Description : Opcode is the machine instruction obtained from decoding instruction stored in. a. Stack pointer b. Address pointer Cc. Instruction register d. Incrementer

Last Answer : Cc. Instruction register

The stack pointer is maintained in a : a. Data b. Register c. Address d. None of these

Description : The stack pointer is maintained in a : a. Data b. Register c. Address d. None of these

Last Answer : b. Register

The processor uses the stack to keep track of where the items are stored on it this by using the: a. Stack pointer register b. Queue pointer register c. Both a & b d. None of these

Description : The processor uses the stack to keep track of where the items are stored on it this by using the: a. Stack pointer register b. Queue pointer register c. Both a & b d. None of these

Last Answer : a. Stack pointer register

What Is A Stack Pointer Register, Describe Briefly.?

Description : What Is A Stack Pointer Register, Describe Briefly.?

Last Answer : Answer :The Stack pointer is a sixteen bit register used to point at the stack. In read write memory the locations at which temporary data and return addresses are stored is known as the stack. ... to avoid program crashes a program should always be written at one end and initialized at the other.

Explain Briefly The Flag Register In The 8085 Microprocessor.?

Description : Explain Briefly The Flag Register In The 8085 Microprocessor.?

Last Answer : Answer :The flag register in 8085 is an 8-bit register which contains 5 bit positions. These five flags are of 1bit F/F and are known as zero, sign, carry, parity and auxiliary carry. ... addition and subtraction operations. The parity flag is used for results containing an even number of one's.

The contents of Register (BL) and Register (AL) of 8085 microprocessor are 49H and 3AH respectively. The contents of AL, the status of carry flag (CF) and sign flag (SF) after executing 'SUB AL, BL' assembly language instruction, are (1) AL=0FH; CF=1; SF=1 (2) AL=F0H; CF=0; SF=0 (3) AL=F1H; CF=1; SF=1 (4) AL=1FH; CF=1; SF=1

Description : The contents of Register (BL) and Register (AL) of 8085 microprocessor are 49H and 3AH respectively. The contents of AL, the status of carry flag (CF) and sign flag (SF) after executing 'SUB AL, BL' assembly language instruction, are ( ... ; CF=0; SF=0 (3) AL=F1H; CF=1; SF=1 (4) AL=1FH; CF=1; SF=1

Last Answer : Answer: 3

What is the size of SP register in 8085 microprocessor?

Description :  What is the size of SP register in 8085 microprocessor? A) 16 bits B) 8 bits C) 64 bits D) 48 bits

Last Answer :  What is the size of SP register in 8085 microprocessor? A) 16 bits B) 8 bits C) 64 bits D) 48 bits

In 8085 microprocessor, the value of the most significant bit of the result following the execution of any

Description : In 8085 microprocessor, the value of the most significant bit of the result following the execution of any arithmetic of Boolean instruction is stored in the (1) Carry status flag (2) Auxiliary carry status flag (3) Sign status flag (4) Zero status flag

Last Answer : In 8085 microprocessor, the value of the most significant bit of the result following the execution of any arithmetic of Boolean instruction is stored in the Sign status flag

When subroutine is called contents of program counter is location address of __ instruction following call instruction is stored on _ __and program execution is transferred to __ address. a. Non executable, pointer and subroutine b. Executable, Stack and Main program Cc. Executable, Queue and Subroutine d. Executable, Stack and Subroutine

Description : When subroutine is called contents of program counter is location address of __ instruction following call instruction is stored on _ __and program execution is transferred to __ address. a. Non ... , Stack and Main program Cc. Executable, Queue and Subroutine d. Executable, Stack and Subroutine

Last Answer : d. Executable, Stack and Subroutine

Microprocessor 8085 can address location upto a. 32K b. 128K c. 64K d. 1M

Description : Microprocessor 8085 can address location upto a. 32K b. 128K c. 64K d. 1M

Last Answer : c. 64K

The function of these microinstructions is to issue the micro orders to_ _ a. CPU b. Memory c. Register d. Accumulator

Description : The function of these microinstructions is to issue the micro orders to_ _ a. CPU b. Memory c. Register d. Accumulator

Last Answer : a. CPU

The _stack can be 4-word memory addressed by 2 bits from an up/down counter known as the stack pointer: a. FIFO b. PIPO c. SISO d. LIFO

Description : The _stack can be 4-word memory addressed by 2 bits from an up/down counter known as the stack pointer: a. FIFO b. PIPO c. SISO d. LIFO

Last Answer : d. LIFO

What is the size of memory which can be accessed by direct accessing in 8085 microprocessor?

Description : What is the size of memory which can be accessed by direct accessing in 8085 microprocessor? A) 64 kB B) 4 kB C) 128 kB D) 128 MB 

Last Answer : What is the size of memory which can be accessed by direct accessing in 8085 microprocessor? A) 64 kB B) 4 kB C) 128 kB D) 128 MB 

In 8085 microprocessor with memory mapped I/O which of the following is true?

Description : In 8085 microprocessor with memory mapped I/O which of the following is true?  (1) I/O devices have 16 bit addresses (2) I/O devices are accessed during IN and OUT instructions (3) There can be a maximum of 256 input and 256 output devices (4) Logic operations can not be performed

Last Answer : I/O devices have 16 bit addresses.

In a 8085 microprocessor system with memory mapped I / 0,

Last Answer : In a 8085 microprocessor system with memory mapped I / 0, arithmetic and logic operations can be directly performed with the I / 0 data.

The extent nesting in subroutine is limited only by: a. Number of available Stack locations b. Number of available Addressing locations c. Number of available CPU locations d. Number of available Memory locations

Description : The extent nesting in subroutine is limited only by: a. Number of available Stack locations b. Number of available Addressing locations c. Number of available CPU locations d. Number of available Memory locations

Last Answer : a. Number of available Stack locations

In 8087, _______ many register stack are there? And of _____ registers. These registers are used as _________ stack. a) 7, 40 bit, FIFO. b) 8, 60 bit, LILO. c) 8, 80 bit, LIFO d) 7, 80 bit, FILO.

Description : In 8087, _______ many register stack are there? And of _____ registers. These registers are used as _________ stack. a) 7, 40 bit, FIFO. b) 8, 60 bit, LILO. c) 8, 80 bit, LIFO d) 7, 80 bit, FILO.

Last Answer : b) 8, 60 bit, LILO.

The content of the accumulator after the execution of the following 8085 assembly language program, is: MVI A, 42H MVI B, 05H UGC: ADD B DCR B JNZ UGC ADI 25H HLT (A) 82 H (B) 78 H (C) 76 H (D) 47 H

Description : The content of the accumulator after the execution of the following 8085 assembly language program, is: MVI A, 42H  MVI B, 05H UGC: ADD B DCR B JNZ UGC ADI 25H HLT (A) 82 H (B) 78 H (C) 76 H (D) 47 H

Last Answer : (C) 76 H

The content of the accumulator after the execution of the following 8085 assembly language program, is MVI A, 35H MOV B, A STC CMC RAR XRA B (A) 00H (B) 35H (C) EFH (D) 2FH

Description : The content of the accumulator after the execution of the following 8085 assembly language program, is MVI A, 35H MOV B, A STC CMC RAR XRA B (A) 00H (B) 35H (C) EFH (D) 2FH

Last Answer : (D) 2FH

The Complement Accumulator (CMA) instruction of 8085 processor on execution affects...

Description : The Complement Accumulator (CMA) instruction of 8085 processor on execution affects a. Zero Flag b. Sign Flag c. Carry Flag d. None of the flags

Last Answer : B

A single instruction to clear the lower four bits of the accumulator I 8085 assembly language is:

Last Answer : A single instruction to clear the lower four bits of the accumulator I 8085 assembly language is: ANI FOH

A group of bits that tell the computer to perform a specific operation is known as_______ A. Instruction code B. Micro-operation C. Accumulator D. Register

Description : A group of bits that tell the computer to perform a specific operation is known as_______ A. Instruction code B. Micro-operation C. Accumulator D. Register

Last Answer : A. Instruction code

A basic instruction that can be interpreted by computer generally has ________ A. An operand and an address B. decoder and an accumulator C. Sequence register and decoder D. None of the Above

Description : A basic instruction that can be interpreted by computer generally has ________ A. An operand and an address B. decoder and an accumulator C. Sequence register and decoder D. None of the Above

Last Answer : A. An operand and an address

________ is a register for Short-term, intermediate storage of arithmetic and logic data in a Computer’s CPU. A. Accumulator B. Bus C. Buffer D. None of the Above

Description : ________ is a register for Short-term, intermediate storage of arithmetic and logic data in a Computer’s CPU. A. Accumulator B. Bus C. Buffer D. None of the Above

Last Answer : A. Accumulator

The act of writing new data into register (1) is possible only when the register is an accumulator (2) is possible only when the register is an accumulator or instruction register (3) erases the previous contents of the register (4) is non-destructive to existing contents

Description : The act of writing new data into register (1) is possible only when the register is an accumulator (2) is possible only when the register is an accumulator or instruction register (3) erases the previous contents of the register (4) is non-destructive to existing contents

Last Answer :  is possible only when the register is an accumulator or instruction register