The potential barrier for germanium is _______ (a) 0.6 V (b) 0.2 V (c) 0.3 V (d) 0.5 V

The potential barrier for germanium is _______
(a) 0.6 V (b) 0.2 V (c) 0.3 V (d) 0.5 V
by

1 Answer

Answer :

(c) 0.3 V
by

Related questions

The potential difference set up across the depletion region is called (a) Absolute potential (b) neutral potential (c) reverse potential (d) potential barrier

Description : The potential difference set up across the depletion region is called (a) Absolute potential (b) neutral potential (c) reverse potential (d) potential barrier

Last Answer : (d) potential barrier

In forward bias, the width of potential barrier __________ (a) Increases (b) decreases (c) remains same (d) no effect

Description : In forward bias, the width of potential barrier __________ (a) Increases (b) decreases (c) remains same (d) no effect

Last Answer : (b) decreases

Semiconductor germanium and silicon are (a) Pentavalent (b) trivalent (c) divalent (d) tetravalent

Description : Semiconductor germanium and silicon are (a) Pentavalent (b) trivalent (c) divalent (d) tetravalent

Last Answer : (d) tetravalent

Pure semiconductors silicon and germanium are a) Extrinsic b) Intrinsic c) Insulator d) Diodes

Description : Pure semiconductors silicon and germanium are a) Extrinsic b) Intrinsic c) Insulator d) Diodes

Last Answer : b) Intrinsic

In transistor, the base region is of the order of _______ (a) 10-5 m (b) 10-2 m (c) 10-8 m (d) 10-6 m

Description : In transistor, the base region is of the order of _______ (a) 10-5 m (b) 10-2 m (c) 10-8 m (d) 10-6 m

Last Answer : d) 10-6 m

When the potential difference of 4 volt is applied across resistance, 10J energy is converted. Find the charge flows. a. 0.20 C b. 2.5C c. 5C d. 10C

Description : When the potential difference of 4 volt is applied across resistance, 10J energy is converted. Find the charge flows. a. 0.20 C b. 2.5C c. 5C d. 10C

Last Answer : b. 2.5C

The negative sign in expression ɛ= -vBL shows that the angle between the direction of L and (v x B) is: a. 90 b. 180 c. 45 d. 0

Description : The negative sign in expression ɛ= -vBL shows that the angle between the direction of L and (v x B) is: a. 90 b. 180 c. 45 d. 0

Last Answer : a. 90

Which of the following is a vector quantity ? (a) Relative permeability (b) Magnetic field intensity (c) Flux density (d) Magnetic potential

Description : Which of the following is a vector quantity ? (a) Relative permeability (b) Magnetic field intensity (c) Flux density (d) Magnetic potential

Last Answer : (b) Magnetic field intensity

If energy of incident photon is greater than the rest mass energy of electron positron pair, the surplus energy is shared by the pair as, a) Potential energy b) Thermal energy c) Electronic energy d) Kinetic energy

Description : If energy of incident photon is greater than the rest mass energy of electron positron pair, the surplus energy is shared by the pair as, a) Potential energy b) Thermal energy c) Electronic energy d) Kinetic energy

Last Answer : d) Kinetic energy

In a semiconductor diode, p-side is earthed and to n-side is applied a potential of -2 volt; the diode shall (a) Conduct (b) Not conduct (c) Conduct partially (d) Break down

Description : In a semiconductor diode, p-side is earthed and to n-side is applied a potential of -2 volt; the diode shall (a) Conduct (b) Not conduct (c) Conduct partially (d) Break down

Last Answer : a) Conduct

Alternating current generator converts.......... energy into electrical energy? a. mechanical energy b. chemical energy c. solar energy d. potential energy

Description : Alternating current generator converts.......... energy into electrical energy? a. mechanical energy b. chemical energy c. solar energy d. potential energy

Last Answer : a. mechanical energy

The anodes in a CRO are at ___________ potential with respect to the cathode a) negative b) high negative c) high positive d) positive

Description : The anodes in a CRO are at ___________ potential with respect to the cathode a) negative b) high negative c) high positive d) positive

Last Answer : c) high positive

A multipurpose instrument for measuring current, potential difference and resistance is a) Ohmmeter b) Astatic galvanometer c) Rheostat d) AVO Meter

Description : A multipurpose instrument for measuring current, potential difference and resistance is a) Ohmmeter b) Astatic galvanometer c) Rheostat d) AVO Meter

Last Answer : d) AVO Meter

Terminal potential difference of a battery is greater than its emf when a. the internal resistance of battery is infinite b. the internal resistance of battery is zero c. the battery is charged d. the battery is discharged

Description : Terminal potential difference of a battery is greater than its emf when a. the internal resistance of battery is infinite b. the internal resistance of battery is zero c. the battery is charged d. the battery is discharged

Last Answer : c. the battery is charged

All electrical appliances are connected in parallel to each other between the main line and neutral wire to get a. same current b. same current and potential difference c. different current but same potential difference d. different current and potential differences

Description : All electrical appliances are connected in parallel to each other between the main line and neutral wire to get a. same current b. same current and potential difference c. different current but same potential difference d. different current and potential differences

Last Answer : c. different current but same potential difference

In the following figure, the terminal potential is a. zero b. 2V c. 12V d. 36V

Description : In the following figure, the terminal potential is a. zero b. 2V c. 12V d. 36V

Last Answer : a. zero

Circuit which gives continuously varying potential is called a. complex network b. wheat stone bridge c. potential divider d. all of above

Description : Circuit which gives continuously varying potential is called a. complex network b. wheat stone bridge c. potential divider d. all of above

Last Answer : c. potential divider

The force per unit charge is called: (a) Electric field (b) Electric field intensity (c) Electric potential energy (d) Electric potential

Description : The force per unit charge is called: (a) Electric field (b) Electric field intensity (c) Electric potential energy (d) Electric potential

Last Answer : b) Electric field intensity

A metallic hallow sphere of 8cm diameter is charged with 4 × 10−8c. The potential on its surface will be: (a) 90 volts (b) 9 volts (c) 9000 volts (d) 900 volts

Description : A metallic hallow sphere of 8cm diameter is charged with 4 × 10−8c. The potential on its surface will be: (a) 90 volts (b) 9 volts (c) 9000 volts (d) 900 volts

Last Answer : c) 9000 volts

Turn ratio of a transformer is 5. If 220 V AC is applied to its primary coil, voltage in the secondary coil will be: a. 44V b. 4.4 V c. 220V d. 1100V

Description : Turn ratio of a transformer is 5. If 220 V AC is applied to its primary coil, voltage in the secondary coil will be: a. 44V b. 4.4 V c. 220V d. 1100V

Last Answer : c. 220V

A galvanometer having a resistance of 4.5 Ω can read up to 5 mA. If it is to read 100 V, then the high resistance to be used in series will be a) 19998 Ω b) 19995.8 Ω c) 19995.5 Ω d) 19996.5 Ω

Description : A galvanometer having a resistance of 4.5 Ω can read up to 5 mA. If it is to read 100 V, then the high resistance to be used in series will be a) 19998 Ω b) 19995.8 Ω c) 19995.5 Ω d) 19996.5 Ω

Last Answer : c) 19995.5

The operational amplifier is _______ (a) High gain amplifier (b) high power amplifier (c)high resistance amplifier (d)low resistance amplifier

Description : The operational amplifier is _______ (a) High gain amplifier (b) high power amplifier (c)high resistance amplifier (d)low resistance amplifier

Last Answer : a) High gain amplifier

An OP-AMPs can amplify _______ (a) D.C (b) A.C (c) both A.C & D.C (d) none of aboveAn OP-AMPs can amplify _______ (a) D.C (b) A.C (c) both A.C & D.C (d) none of above

Description : An OP-AMPs can amplify _______ (a) D.C (b) A.C (c) both A.C & D.C (d) none of above

Last Answer : b) A.C

Non-inverting amplifier circuits have _______ (a) Very high input impedance (b) very low input impedance (c) low output impedance (d) none of above

Description : Non-inverting amplifier circuits have _______ (a) Very high input impedance (b) very low input impedance (c) low output impedance (d) none of above

Last Answer : (a) Very high input impedance

Process of conversion low voltage to high voltage is called _______ (a) Rectification (b)forward bias (c) reverse bias (d) amplification

Description : Process of conversion low voltage to high voltage is called _______ (a) Rectification (b)forward bias (c) reverse bias (d) amplification

Last Answer : (d) amplification

_______ electric power is the most common method used by electrical grids to transfer power.

Description : _______ electric power is the most common method used by electrical grids to transfer power.  (A) One-phase (B) Two-phase (C) Three-phase (D) None of the above

Last Answer : Three-phase electric power is the most common method used by electrical grids to transfer power. 

Why is 440 V used for motors and 110/220 V used for lighting?

Description : Why is 440 V used for motors and 110/220 V used for lighting?

Last Answer : Motor load currents are large. Motors are 3-phase loads. A higher 440V voltage means lesser current for the same power and hence losses and size of cable wires is lower. Lighting is single phase ... small, hence lower voltage means less insulation in the cable wires. Ask E/O for more information

What is the meaning of saying I and V are in phase?

Description : What is the meaning of saying I and V are in phase?

Last Answer : The angle between the I and V waveforms is zero which means the load is purely resistive.

Size of V belts used for 25KW Alternator a. C121 c. C122 b. C123 d. C124

Description : Size of V belts used for 25KW Alternator a. C121 c. C122 b. C123 d. C124

Last Answer : c. C122

Which one of the following radiations has the most energetic photon? a) T.V. waves b) Micro waves c) X-rays d)  - rays

Description : Which one of the following radiations has the most energetic photon? a) T.V. waves b) Micro waves c) X-rays d)  - rays

Last Answer : d)  - rays

One henry is equal to.......: a. VA/s b. Nm/A c. As/V d. Vs/A

Description : One henry is equal to.......: a. VA/s b. Nm/A c. As/V d. Vs/A

Last Answer : d. Vs/A

One henry is equal to: a. Vs-1 A b. NmA-1 c. V -1 s A d. V s A

Description : One henry is equal to: a. Vs-1 A b. NmA-1 c. V -1 s A d. V s A

Last Answer : d. V s A

If velocity of a conductor moving through a magnetic field ‘B’ is made zero, then Motional emf will be: a. –VBL b. –V/BL c. – BL/V d. zero

Description : If velocity of a conductor moving through a magnetic field ‘B’ is made zero, then Motional emf will be: a. –VBL b. –V/BL c. – BL/V d. zero

Last Answer : a. –VBL

Electric power a. V×I b. W/t c. V 2 /I d. E2 /t

Description : Electric power a. V×I b. W/t c. V 2 /I d. E2 /t

Last Answer : . V×I

Three bulbs are rating 40W 60W and 100W designed to work on 220V mains. Which bulb will burn most brightly if they are connected in series across 220 V mains? a. 40 W bulb b. 60 W blub c. 100 W blub d. all will burn equally brightly

Description : Three bulbs are rating 40W 60W and 100W designed to work on 220V mains. Which bulb will burn most brightly if they are connected in series across 220 V mains? a. 40 W bulb b. 60 W blub c. 100 W blub d. all will burn equally brightly

Last Answer : a. 40 W bulb

A current of 5.8 A flows through a 0.25 m long straight conductor which is kept perpendicular in a region of uniform magnetic field of 3.7 T . The force on conductor is a) 5.4 N b) 2.4 N c) 3.4 N d) 6.4 N

Description : A current of 5.8 A flows through a 0.25 m long straight conductor which is kept perpendicular in a region of uniform magnetic field of 3.7 T . The force on conductor is a) 5.4 N b) 2.4 N c) 3.4 N d) 6.4 N

Last Answer : a) 5.4 N

An α particle moves perpendicular to a constant magnetic field of strength 1.2 T in a circular path of radius 0.7 m. The speed of α particle in ms-1 is ______________ a) 2.7 × 107 b) 2.6 × 107 c) 3.2 × 107 d) 2.0 × 107

Description : An α particle moves perpendicular to a constant magnetic field of strength 1.2 T in a circular path of radius 0.7 m. The speed of α particle in ms-1 is ______________ a) 2.7 × 107 b) 2.6 × 107 c) 3.2 × 107 d) 2.0 × 107

Last Answer : a) 2.7 × 107

Why can't the potential barrier of a diode be used as a voltage source?

Description : Why can't the potential barrier of a diode be used as a voltage source?

Last Answer : The potential barrier of a diode is caused by the movement ofelectrons to create holes. The electrons and holes create apotential barrier, but as this voltage will not supply current, itcannot be used as a voltage source.

What is barrier potential?

Description : What is barrier potential?

Last Answer : Because of the oppositely charged ions present on both sides of PN junction an electric potential is established across the junction even without any external voltage source which is termed as barrier potential.

Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the determination of catalyst surface area and pore size distribution (C) A higher temperature favours the reaction of higher activation energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Description : Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the ... energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Last Answer : (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

When a reverse bias is applied to a diode, it will a. Raise the potential barrier b. Lower the potential barrier c. Increases the majority-carrier a current greatly d. None of these

Description : When a reverse bias is applied to a diode, it will a. Raise the potential barrier b. Lower the potential barrier c. Increases the majority-carrier a current greatly d. None of these

Last Answer : a. Raise the potential barrier

Avalanche breakdown in a diode occurs when a. Potential barrier is reduced to zero. b. Forward current exceeds certain value. c. Reverse bias exceeds a certain value. d. None of these

Description : Avalanche breakdown in a diode occurs when a. Potential barrier is reduced to zero. b. Forward current exceeds certain value. c. Reverse bias exceeds a certain value. d. None of these

Last Answer : c. Reverse bias exceeds a certain value.

Barrier potential in a P-N junction is caused by (A) Thermally generated electrons and holes. (B) Diffusion of majority carriers across the junction. (C) Migration of minority carriers across the junction. (D) Flow of drift current.

Description : Barrier potential in a P-N junction is caused by (A) Thermally generated electrons and holes. (B) Diffusion of majority carriers across the junction. (C) Migration of minority carriers across the junction. (D) Flow of drift current.

Last Answer : (B) Diffusion of majority carriers across the junction.

Consider the following statements regarding the formation of P-N junctions: 1. Holes diffuse across the junction from P-side to N—side 2. The depletion layer is wiped out. 3. There is continuous flow of current across the junction 4. A barrier potential is set up across the junction Which of the above statements are correct? (a) 1 and 3 (b) 2 and 3 (c) 1 and 4 (d) 2 and 4

Description : Consider the following statements regarding the formation of P-N junctions: 1. Holes diffuse across the junction from P-side to N-side 2. The depletion layer is wiped out. 3. There is continuous flow of current across the junction 4 ... correct? (a) 1 and 3 (b) 2 and 3 (c) 1 and 4 (d) 2 and 4

Last Answer : Ans: (c) When a pn-junction is formed, there will be diffusion of carries across the junctions followed by recombination, and the creation of a depletion layer across which a ... potential is established, which will prevent further diffusion of carries across the junction, leading to equilibrium

Barrier potential in a P-N junction is caused by

Description : Barrier potential in a P-N junction is caused by   (A) thermally generated electrons and holes (B) diffusion of majority carriers across the junction (C) migration of minority carriers across the junction (D) flow of drift current.

Last Answer : Barrier potential in a P-N junction is caused by migration of minority carriers across the junction

The potential barrier at a P - N junction is due to

Description : The potential barrier at a P - N junction is due to  1. Majority carriers 2. Minority carriers 3. Both majority and minority carriers 4. Fixed donor and acceptor ions 

Last Answer : The potential barrier at a P - N junction is due to Fixed donor and acceptor ions 

What is the potential barrier of metal?

Description : What is the potential barrier of metal?

Last Answer : Potential barrier of metal is zero.

For germanium the forbidden gap is (A) 0.15ev. (B) 0.25ev. (C) 0.5ev. (D) 0.7ev.

Description : For germanium the forbidden gap is (A) 0.15ev. (B) 0.25ev. (C) 0.5ev. (D) 0.7ev.

Last Answer : (D) 0.7ev.

Which ofthe followingcableswill have the highestlaunch power capability? a. 50/125/0.2 b. 85/125/0.275 c. 62.5/125/0.275 d. 100/140/0.3

Description : Which ofthe followingcableswill have the highestlaunch power capability? a. 50/125/0.2 b. 85/125/0.275 c. 62.5/125/0.275 d. 100/140/0.3

Last Answer : d. 100/140/0.3

.Aslightis coupledin amultipointreflective device,thepowerisreduced by a. 1.5 dB b. 0.1 dB c. 0.5 dB d. 0.001 dB

Description : .Aslightis coupledin amultipointreflective device,thepowerisreduced by a. 1.5 dB b. 0.1 dB c. 0.5 dB d. 0.001 dB

Last Answer : c. 0.5 dB