In forward bias, the width of potential barrier __________ (a) Increases (b) decreases (c) remains same (d) no effect

In forward bias, the width of potential barrier __________
(a) Increases (b) decreases (c) remains same (d) no effect
by

1 Answer

Answer :

(b) decreases
by

Related questions

On increasing the reverse bias to a large value in a p-n junction diode current (a) Increases slowly (b) Remains fixed (c) Suddenly increases (d) Decreases slowly

Description : On increasing the reverse bias to a large value in a p-n junction diode current (a) Increases slowly (b) Remains fixed (c) Suddenly increases (d) Decreases slowly

Last Answer : (c) Suddenly increases

Avalanche breakdown in a diode occurs when a. Potential barrier is reduced to zero. b. Forward current exceeds certain value. c. Reverse bias exceeds a certain value. d. None of these

Description : Avalanche breakdown in a diode occurs when a. Potential barrier is reduced to zero. b. Forward current exceeds certain value. c. Reverse bias exceeds a certain value. d. None of these

Last Answer : c. Reverse bias exceeds a certain value.

Depletion region of a junction is formed _________ (a) during the manufacturing process (b) under forward bias (c) under reverse bias (d) when temperature varies

Description : Depletion region of a junction is formed _________ (a) during the manufacturing process (b) under forward bias (c) under reverse bias (d) when temperature varies

Last Answer : (a) during the manufacturing process

Process of conversion low voltage to high voltage is called _______ (a) Rectification (b)forward bias (c) reverse bias (d) amplification

Description : Process of conversion low voltage to high voltage is called _______ (a) Rectification (b)forward bias (c) reverse bias (d) amplification

Last Answer : (d) amplification

When a reverse bias is applied to a diode, it will a. Raise the potential barrier b. Lower the potential barrier c. Increases the majority-carrier a current greatly d. None of these

Description : When a reverse bias is applied to a diode, it will a. Raise the potential barrier b. Lower the potential barrier c. Increases the majority-carrier a current greatly d. None of these

Last Answer : a. Raise the potential barrier

.If we narrow the distance between two slits in Young’s experiment the fringes width __________. A. Increases B. Decreases C. Remains same D. becomes zero

Description : .If we narrow the distance between two slits in Young’s experiment the fringes width __________. A. Increases B. Decreases C. Remains same D. becomes zero

Last Answer : B. Decreases

The width of depletion layer of a P-N junction – (1) decreases with light doping (2) increases with heavy doping (3) is independent of applied voltage (4) is increased under reverse bias

Description : The width of depletion layer of a P-N junction – (1) decreases with light doping (2) increases with heavy doping (3) is independent of applied voltage (4) is increased under reverse bias

Last Answer : (4) is increased under reverse bias Explanation: The total width of the depletion region is a function of applied reverse-bias and impurity concentration. Forward bias decreases the depletion region width whilst reverse bias increases it.

The width of depletion layer of a P-N junction (1) decreases with light doping (2) increases with heavy doping (3) is independent of applied voltage (4) is increased under reverse bias

Description : The width of depletion layer of a P-N junction (1) decreases with light doping (2) increases with heavy doping (3) is independent of applied voltage (4) is increased under reverse bias

Last Answer :  is increased under reverse bias

A, when there is an increase in the input voltage, the forward bias of Q1 increases/decreases (which one).

Description : A, when there is an increase in the input voltage, the forward bias of Q1 increases/decreases (which one).

Last Answer : Increases.

The potential difference set up across the depletion region is called (a) Absolute potential (b) neutral potential (c) reverse potential (d) potential barrier

Description : The potential difference set up across the depletion region is called (a) Absolute potential (b) neutral potential (c) reverse potential (d) potential barrier

Last Answer : (d) potential barrier

The potential barrier for germanium is _______ (a) 0.6 V (b) 0.2 V (c) 0.3 V (d) 0.5 V

Description : The potential barrier for germanium is _______ (a) 0.6 V (b) 0.2 V (c) 0.3 V (d) 0.5 V

Last Answer : (c) 0.3 V

raft increases with increase in forward speed for most of the implement, mainly due to a) More rapid acceleration of any soil particles that is moved appreciably b) More working width c) Increased working depth d) Draft decreases with increase in speed of implement

Description : raft increases with increase in forward speed for most of the implement, mainly due to a) More rapid acceleration of any soil particles that is moved appreciably b) More working width c) Increased working depth d) Draft decreases with increase in speed of implement

Last Answer : a) More rapid acceleration of any soil particles that is moved appreciably

With forward bias to a pn junction , the width of depletion layer ………

Last Answer : With forward bias to a pn junction , the width of depletion layer Decreases.

In a period from Li to F, ionisation potential – (1) cannot be predicted (2) increases (3) decreases (4) remains same

Description : In a period from Li to F, ionisation potential – (1) cannot be predicted (2) increases (3) decreases (4) remains same

Last Answer : (1) cannot be predicted

In a period from Li to F, ionisation potential (1) cannot be predicted (2) increases (3) decreases (4) remains same

Description : In a period from Li to F, ionisation potential (1) cannot be predicted (2) increases (3) decreases (4) remains same

Last Answer : cannot be predicted

If the motor is overloaded, then the magnitude of ‘back emf’” a. Increases b. Decreases c. Constant d. Becomes zero

Description : If the motor is overloaded, then the magnitude of ‘back emf’” a. Increases b. Decreases c. Constant d. Becomes zero

Last Answer : Increases

When earth fault occurs: a) voltage potential at the earth mat increases due to grounding b) voltage potential at the earth mat decreases due to grounding c) voltage potential at the earth mat remains zero irrespective of fault d) none of the above

Description : When earth fault occurs: a) voltage potential at the earth mat increases due to grounding b) voltage potential at the earth mat decreases due to grounding c) voltage potential at the earth mat remains zero irrespective of fault d) none of the above

Last Answer : Ans: A

The volume of a fluid __________ as the pressure increases. (A) Remains same (B) Decreases (C) Increases (D) None of these

Description : The volume of a fluid __________ as the pressure increases. (A) Remains same (B) Decreases (C) Increases (D) None of these

Last Answer : Answer: Option B

As we climb up the mountain the atmospheric pressure __________. a)decreases b)increases c)remains same d)none

Description : As we climb up the mountain the atmospheric pressure __________. a)decreases b)increases c)remains same d)none

Last Answer : a)decreases

A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Last Answer : a. remains the same

Thevelocityfactor of a transmissionline a. depends on the dielectric constant of the material used b. increases the velocity along the transmission line c. is govern by the skin effect d. is higher for a solid dielectric than for air

Description : Thevelocityfactor of a transmissionline a. depends on the dielectric constant of the material used b. increases the velocity along the transmission line c. is govern by the skin effect d. is higher for a solid dielectric than for air

Last Answer : a. depends on the dielectric constant of the material used

as the order increases, the width of a dark band in diffraction Patterns __________. A. Increases B. Decreases C. Does not change D. becomes infinity

Description : as the order increases, the width of a dark band in diffraction Patterns __________. A. Increases B. Decreases C. Does not change D. becomes infinity

Last Answer : Increases

Air resistance ______ with an increase in the speed of the object moving through it. a) increases b)decreases c)remains same d)no change

Description : Air resistance ______ with an increase in the speed of the object moving through it. a) increases b)decreases c)remains same d)no change

Last Answer : a) increases

During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Description : During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. (A) Decreases (B) Increases (C) Remains unchanged (D) Decreases linearly

Last Answer : (B) Increases

Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Description : Production rate __________ with increased fineness, with a given energy input to the size reduction machine. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the machine

Last Answer : (A) Decreases

The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Description : The boiling points of pure components of a binary system __________ with increase in total pressure of the system. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease, depends on the system

Last Answer : (B) Increases

Thermal conductivities of most of the liquids __________ with rise in temperature.(A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Description : Thermal conductivities of most of the liquids __________ with rise in temperature. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the liquid

Last Answer : (B) Decreases

Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : Thermal conductivity of a gas at low density, __________ with increase in temperature. (A) Decreases (B) Increases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : (B) Increases

Fractional conversion __________ with increase in pressure for ammonia synthesis reaction i.e., N2 + 3H2 ⇌ 2NH3 . (A) Increases (B) Decreases (C) Remains unchanged (D) Unpredictable from the data

Description : Fractional conversion __________ with increase in pressure for ammonia synthesis reaction i.e., N2 + 3H2 ⇌ 2NH3 . (A) Increases (B) Decreases (C) Remains unchanged (D) Unpredictable from the data

Last Answer : (A) Increases

Fractional conversion __________ for an exothermic reversible chemical reaction, when the temperature is maximum. (A) Increases (B) Remains unchanged (C) Decreases (D) Unpredictable from the data

Description : Fractional conversion __________ for an exothermic reversible chemical reaction, when the temperature is maximum. (A) Increases (B) Remains unchanged (C) Decreases (D) Unpredictable from the data

Last Answer : (C) Decreases

Bulk diffusion in catalyst pore __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Description : Bulk diffusion in catalyst pore __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) Increases exponentially

Last Answer : (B) Decreases

The melting point of paraffin wax (which contracts on solidification) __________ with pressure rise. (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Description : The melting point of paraffin wax (which contracts on solidification) __________ with pressure rise. (A) Increases (B) Decreases (C) Remains unchanged (D) Decreases linearly

Last Answer : (A) Increases

At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Description : At a given temperature, the volume of a gas dissolved in a solvent __________ with increase in pressure. (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the gas

Last Answer : C) Remains unchanged

The entropy __________ in an irreversible cyclic process.  A. remains constant  B. decreases  C. increases

Description : The entropy __________ in an irreversible cyclic process.  A. remains constant  B. decreases  C. increases

Last Answer : Answer: C

All electrical appliances are connected in parallel to each other between the main line and neutral wire to get a. same current b. same current and potential difference c. different current but same potential difference d. different current and potential differences

Description : All electrical appliances are connected in parallel to each other between the main line and neutral wire to get a. same current b. same current and potential difference c. different current but same potential difference d. different current and potential differences

Last Answer : c. different current but same potential difference

If PN junction is forward biased its resistance is (a) Zero (b) Infinity (c) A few ohm (d) A few kilo ohms

Description : If PN junction is forward biased its resistance is (a) Zero (b) Infinity (c) A few ohm (d) A few kilo ohms

Last Answer : c) A few ohm

A light emitting diode emits light only when (a) Reversed biased (b) forward biased (c) unbiased (d) none

Description : A light emitting diode emits light only when (a) Reversed biased (b) forward biased (c) unbiased (d) none

Last Answer : (b) forward biased

Forward current through a semi-conductor diode circuit is due to ________ (a) Minority carriers (b) majority carriers (c) holes (d) electrons

Description : Forward current through a semi-conductor diode circuit is due to ________ (a) Minority carriers (b) majority carriers (c) holes (d) electrons

Last Answer : (b) majority carriers

For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Description : For normal operation of a transistor, the collector base junction is kept (a) Unbiased (b) forward biased (c) reverse biased (d) none

Last Answer : (c) reverse biased

The reason why a catalyst increases the rate of reaction is that, it (A) Decreases the energy barrier for reaction (B) Increases the activation energy (C) Decreases the molecular collision diameter (D) None of these

Description : The reason why a catalyst increases the rate of reaction is that, it (A) Decreases the energy barrier for reaction (B) Increases the activation energy (C) Decreases the molecular collision diameter (D) None of these

Last Answer : (A) Decreases the energy barrier for reaction

What type of bias opposes the PN junction barrier?

Description : What type of bias opposes the PN junction barrier?

Last Answer : Forward.

The claddingwhichsurroundsthe fiber core a. is used to reduce optical interference b. is used to protect the fiber c. acts to help guide the light in the core d. ensures that the refractive index remains constant

Description : The claddingwhichsurroundsthe fiber core a. is used to reduce optical interference b. is used to protect the fiber c. acts to help guide the light in the core d. ensures that the refractive index remains constant

Last Answer : c. acts to help guide the light in the core

Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the determination of catalyst surface area and pore size distribution (C) A higher temperature favours the reaction of higher activation energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Description : Pick out the wrong statement. (A) Exit age description function (E) and internal age distribution function (I) are related as, E = -(dI/dθ) (B) Chemisorption studies are useful in the ... energy (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

Last Answer : (D) A catalyst increases the potential energy barrier over which the reactants must pass to form products

When a catalyst increases the rate of forward reaction, the value of rate constant (A) Increases (B) Decreases (C) Remain same (D) Becomes infinite

Description : When a catalyst increases the rate of forward reaction, the value of rate constant (A) Increases (B) Decreases (C) Remain same (D) Becomes infinite

Last Answer : (A) Increases

Photodiodes used as fiber optic directors are a. Unbiased to generate a voltage same as a solar cell b. Forward bias c. Reversed bias d. Thermoelectrically cooled

Description : Photodiodes used as fiber optic directors are a. Unbiased to generate a voltage same as a solar cell b. Forward bias c. Reversed bias d. Thermoelectrically cooled

Last Answer : c. Reversed bias

Photodiodes used as fiber optic directors are ∙ a. Unbiased to generate a voltage same as a solar cell ∙ b. Forward bias ∙ c. Reversed bias ∙ d. Thermoelectrically cooled

Description : Photodiodes used as fiber optic directors are ∙ a. Unbiased to generate a voltage same as a solar cell ∙ b. Forward bias ∙ c. Reversed bias ∙ d. Thermoelectrically cooled

Last Answer : ∙ c. Reversed bias

When load factor and diversity factor increases ___________ a) cost of electricity decreases b) cost of electricity also increases c) cost of electricity remains same d) cost of electricity increases exponential

Description : When load factor and diversity factor increases ___________ a) cost of electricity decreases b) cost of electricity also increases c) cost of electricity remains same d) cost of electricity increases exponential

Last Answer : Ans: A

At lower temperatures and pressures, the latent heat of vaporization of a refrigerant (a) decreases (b) increases (c) remains same (d) depends on other factors

Description : At lower temperatures and pressures, the latent heat of vaporization of a refrigerant (a) decreases (b) increases (c) remains same (d) depends on other factors

Last Answer : Ans: b

Work input to the air compressor with n as index of compression A. Increases with increase in value of n B. Decrease with increase in value of n C. remains same whatever the value of n D. first increase and then decreases with increase of value of n.

Description : Work input to the air compressor with n as index of compression A. Increases with increase in value of n B. Decrease with increase in value of n C. remains same whatever the value of n D. first increase and then decreases with increase of value of n.

Last Answer : ANSWER : A

When iron rusts, the weight (a) Increases (b) Decreases (c) Remains the same (d) First increases then decreases

Description : When iron rusts, the weight (a) Increases (b) Decreases (c) Remains the same (d) First increases then decreases

Last Answer : Ans:(a)